Oracle Instances Processes consuming too much memory

Will somebody be able to guide me with the factors that are causing too much memory consumption when a single Oracle.exe instance is started ? Due to this problem it is not possible to run 2 instances at the same time.
Oracle is running on Windows NT 4.0 SP6.
Oracle version 8.1.6.0.0
Currently we have 512MBytes of ram.(4.83G free space)
One of the Instance consumes as much as 178,320K of Ram,
another consumes about 138,000K

Oracle consumes as much memory as you want, but more memory is faster.
Review your init.ora (db_block_buffer y shared_pool_size)
(It4s posible to run 10 instances in a machine with just 1 Gigabyte and they work fine. It depends on the use of the databases, the number of users, just for production or development, etc, ...).

Similar Messages

Firefox 12 STILL consumes too much memory and periodically stalls

1. This has gone on actually since at least Firefox 8 for many of us. With Windows 7 32 or 64bit, AND we are told OTHER OS's as well, Firefox 12 IS consuming too much memory!
When FF 12 memory consumption "hits" 800MB on a 8 GB machine, and continues to slowly climb, FF 12 has code or other problems.
2. ALSO, Firefox 12 under many circumstances, is slowing to a crawl, especially in opening windows and tabs.
NOTHING we do, inspect with memory tools, etc. seems to point to any "culprits" or guide the way to researching and potentially solving these problems...and they ARE problems within Firefox 12, and likely earlier versions.
TIME TO CLEAR THE AIR?
These are problems being seen by others, with or without any (totally blanked out/disabled) Add-On's and even most Plug-In's being disabled or removed, both for testing the problems sen in FF 12.
There IS a problem, or more than one, here, and it's not isolated or "just refer to this checklist" solvable.
There's problems, perhaps memory leaks and other agenda IN THE CODE.
We users need to stop being poo-poo'ed and "pampered" by needless communications that do nothing to truly address the problems.

I encountered this after the memory leak was mentioned as pat of a slowdown issue with an add-on that has been in use as long as I've been using Firefox (All-in one sidebar -AIOS). After a relatively short length of time under both Firefox 11 and 12 it starts to slow down. Sub menus take more than a second to show up when the parent menu is clicked, links take more than a second to activate, pages don't load as quickly. (I have a 30Mbps downstream internet connection that I test regularly, and consistently shows between 25 and 30MBps speeds from multiple sites throughout the US. It's NOT my download speed.)
In looking for explanations I saw at least one mention of a memory Leak.
So I decided to test this for myself. I first removed AIOS, then re-started Firefox and just left it running. I did nothing except minimize and restore it a few times. About an hour later the memory used by FF had gone from a reasonable 42K or so, to over 200K.
I tested again after uninstalling ALL my add-ons and plug ins. The same thing happened again.
This is NOT simply high memory use. Which I interpret as a particular tasks or process using more memory than it maybe should.
This is quite clearly a memory leak. Nothing was being executed, nothing was running with Firefox, and no pages were loaded during this time. But he use memory just steadily grew.
This is clearly a new issues since I did NOT have this problem when I was using Firefox 8. If I can find an install of that I'm going back to it.
If not I'll settle for the ESR mentioned here. If nothing else it seems to have a slower leak.
I never did like the new version number / rapid release schedule. Mostly because growing version numbers at that rate made no real sense to me as a developer myself. But also because speed of release for new features should not be the target but quality. I think we can see that this has clearly fallen by the wayside.
I only wish I thought there was a viable alternative.

You cannot embed this FLV file because it consumes too much memory. Could sb help with this problem?

You cannot embed this FLV file because it consumes too much memory. Could sb help with this problem?

The error is pretty concise. Do you know how to re-encode the video smaller?

Jack and oss2jack consume too much memory

This is my free output when I load jack and oss2jack at startup:
total used free shared buffers cached
Mem: 250148 244720 5428 0 5160 67224
-/+ buffers/cache: 172336 77812
Swap: 2449860 66048 2383812
A check in top reveals that jack and oss2jack are the main culprits.
Because of this, I cannot load hydrogen with the ns_kit7free samples (which is 200MB worth of .wav files). It terminates (probably due to trying to access too much memory) when I attempt to switch the drumkit to ns_kit7free. I have managed to load it before, when I was just using ALSA directly. Is there any way to reduce the memory consumption of jack and oss2jack?
I have increased my swap space to > 2GB (as seen in the free output) but it doesn't help.

jonathantan86 wrote:From top's output jack took up 2/3rd of the memory used. About adding more memory, well...it's a laptop so it's difficult to add memory.
Well, if this can't be solved and you don't have to use ALSA, try OSS/Commercial (wiki); it has a virtual mixer in kernel-space and supports up to 32 sound output streams

Oracle Consuming too much memory.

Hi All,
We are having Oracle with only single instance running on the machine which has 8GB RAM. And we just have only Oracle running on this machine.
OS - RHEL4
Oracle : 10.2.0.1
Out of this 8GB RAM 7.5GB has been utilized.. Can somebody please help me to find out which processes are using this much memory..
PGA_AGGREGATE_TARGET = 512MB
SGA_TARGET = 2G
SGA_MAX_SIZE = 2G
Since we have allocated only 2GB as our SGA still oracle is utilizing upto 7.5GB memory.. what might be the reason behind this.
Any help would be great.
Thanks

Here's my top output.. Sorted by ,memory usage
top - 03:00:31 up 18:25, 2 users, load average: 0.06, 0.03, 0.00
Tasks: 246 total, 1 running, 245 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 8306864k total, 8028476k used, 278388k free, 103548k buffers
Swap: 10241396k total, 51416k used, 10189980k free, 7397472k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3061 oracle 15 0 2145m 434m 431m S 0 5.4 0:40.53 oracle
2987 oracle 15 0 2145m 144m 140m S 0 1.8 0:01.82 oracle
2993 oracle 15 0 2142m 111m 108m S 0 1.4 0:05.68 oracle
2999 oracle 15 0 2143m 97m 93m S 0 1.2 0:03.02 oracle
15198 oracle 15 0 2142m 82m 79m S 0 1.0 0:00.46 oracle
2997 oracle 15 0 2142m 78m 76m S 0 1.0 0:00.47 oracle
13237 oracle 15 0 2150m 68m 65m S 0 0.8 0:01.35 oracle
2989 oracle 15 0 2156m 45m 42m S 0 0.6 0:08.21 oracle
6800 oracle 15 0 2141m 40m 38m S 0 0.5 0:00.22 oracle
3009 oracle 15 0 2167m 40m 21m S 0 0.5 0:00.36 oracle
3015 oracle 15 0 2167m 39m 21m S 0 0.5 0:00.39 oracle
3011 oracle 18 0 2167m 39m 18m S 0 0.5 0:00.40 oracle
3013 oracle 15 0 2167m 39m 18m S 0 0.5 0:00.80 oracle
3108 oracle 18 0 2141m 36m 34m S 0 0.4 0:00.37 oracle
2991 oracle 16 0 2143m 35m 33m S 0 0.4 0:00.14 oracle
20921 oracle 16 0 2141m 33m 31m S 0 0.4 0:00.06 oracle
19872 oracle 15 0 2142m 32m 29m S 0 0.4 0:00.09 oracle
2985 oracle 15 0 2141m 31m 30m S 0 0.4 0:00.13 oracle
This just displays the process that consumes maximum memory..
Can we find the PGA usage for each process from database side..

Backupd process using too much memory, blocking up system (Yosemite)

Hello,
Since I upgraded to Yosemite (maybe even only after I installed 10.10.1) on my Early 2009 17" MacBook Pro, after a while, a process called "backupd" is started, using all available memory, then switching to virtual memory. After a few hours, it can take more than 20 GB of virtual memory, making the MacBook Pro very slow and unresponsive. Killing the process using Activity Monitor (which can take many minutes because of the unresponsiveness) regains the used memory, and almost immediately makes the machine responsive again.
What is this "backupd" doing anyway, are there means to prevent it from running at all or to let it stop using so much memory, or might there be a bug in OS X 10.10.1?
Cheers,
Dirk

I did that anyway yesterday, to turn off the mobile backups, as my MBP is not so mobile anymore
Let's see if it works and if the problem is solved by it

ESSSVR consuming too much memory

I was concerned about the memory consumption of the ESSSVR.exe process and I think there might be a problem with it.
I have two instances available to me with the exact OS / Hardware / Environment configuration and the exact same configuration when it comes to Hyperion. I have deployed only one Planning application on both environments.
When I did a fresh start of the services, one environment ESSSVR.exe process was taking up about 235,212K of memory. However on the other environment it is taking up 1,538,476K. This is a HUGE difference and I am unable to determine why.
Can anyone help me identify the source of this huge memory consumption?
Thanks in advance
Shehzad

shehzad k wrote:
When I did a fresh start of the services, one environment ESSSVR.exe process was taking up about 235,212K of memory. However on the other environment it is taking up 1,538,476K. This is a HUGE difference and I am unable to determine why.Vasavya, the Op said he had gone through a fresh start of the services.
Anyway, checking the index cache on each of the databases on both environments may be beneficial.
Cheers
John
http://john-goodwin.blogspot.com/

Webview control consumes too much memory in WP 8.1 Runtime

I am developing a Windows Phone 8.1 Store app (C#/XAML) and I use a Webview control on one of the app pages. Everything was OK until my app started to close with no exceptions. I suspected memory issues and was actually right. I've made some profiling
and became certain the problem was with the Webview control. When I navigate to some web page, the (unmanaged) memory consumption grows rapidly, and in some further navigations it exceeds the memory limits (180 MB for low-memory devices) and the app terminates.
Manual garbage collector calls do not help even when the page that hosts Webview control is closed. I am stuck now and have no idea how I can deal with this problem.

OK. I've created a very simple demo for you. You can grab it here
https://onedrive.live.com/redir?resid=A2B175448055B3F3!6839&authkey=!AFD34k9bZwDaelE&ithint=file%2czip
Navigate to some pages while profiling and you will see how the memory consumption grows. The memory isn't cleared even after WebBrowserPage is closed. For a low-memory device it's enough to navigate to 2-3 such web pages to get the app terminated.
Hi Max,
Yes, I can reproduce this issue on my side:
In my experience, this should be related to WebView memory cache, unfortunately, currently there is no way to dispose this programmatically.
A possible workaround would be adding WebView control dynamically and removing it when navigate away from this page:
void HardwareButtons_BackPressed(object sender, BackPressedEventArgs e)
e.Handled = true;
var frame = Window.Current.Content as Frame;
if (frame != null && frame.CanGoBack)
grid1.Children.Clear();
GC.Collect();
frame.GoBack();
protected override void OnNavigatedTo(NavigationEventArgs e)
if (e.Parameter != null && e.Parameter is string)
GC.Collect();
WebView webView = new WebView();
grid1.Children.Add(webView);
webView.Navigate(new Uri((string)e.Parameter));
Diagnostics:
Thank you for your response and solution. Unfortunately it doesn't fully help, because the memory isn't fully cleaned by GC and in some time of actively using a Webview it is leaking anyway. But garbage collecting makes sense as it helps the in-use memory
not to grow so fast.
So I think this is a best solution we have so far. I wish a Webview would be better in further versions of Windows Phone.

Oracle take up too much memory in windows xp

hi all,
i'm having a problem with my laptop. i've oracle database 11g installed in my laptop. but then my laptop slow down.
the oracle process take too much memory. my physical memory(RAM) is 3GB.
is there any way to reduce the memory usage of the oracle process?
thanks,
aku

hi mr. varad,
thanks for your quick reply. this is the memory allocated for oracle.
Total System Global Area => 535662592 bytes
Fixed Size => 1334380 bytes
Variable Size => 306185108 bytes
Database Buffers => 222298112 bytes
Redo Buffers => 5844992 bytes
thanks,
aku
Edited by: akulala on Sep 17, 2009 5:48 PM

Firefox uses too much memory

I've been using Firefox as the default browser on my systems (both Windows and Linux and in 32 or 64 editions) and for some reason Firefox consumes too much memory. Now trust me. I have a very fast machine and so I get very frustrated with this issue as it seems to be a Firefox only issue. Its true that I might have up to 40 tabs open at times but Chrome can handle it Safari can handle it and even Explorer can handle it. Sometimes Firefox's memory consumption peaks to an astonish 3GB of memory which is unheard of. My machine is so fast that I can have up to 10 programs open (Maya, Photoshop, Cinema 4d, Autodesk Suites MySql server and PHP5, MS Office) and still be able to work with them all at the same time, but Firefox crashes suddenly and that is very annoying as I've customized it to my needs adding extensions and making sure all my online baking is done using Firefox. This memory issue is far more noticeable when I'm using Windows 7 64 bits. The same amount of tabs and extensions opened on Linux have no effect on memory and I often switch to Linux just to be able to enjoy a smooth Firefox browsing experience. I've invested so much money into building an amazing machine and it takes 10 minutes of having Firefox running to crash it all completely. I've lost track of the amount of times I've lost my profile and had to rebuild all my customizations but I can stand that. What is beyond my comprehension is the fact that when I'm using Windows XP or Linux the memory used by Firefox is far lower than when I'm using Windows 7 or 8.1 .
Can you help me out? I really love Firefox and would like to keep using it as my default browser but can't afford losing my profile info every time Firefox crashes or having Windows Explorer crashing and losing all the work I'm doing on other software programs.
Much appreciated;
Sam

Are there any tabs reopened from the previous session when this happens?
Do you keep a large history?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/
Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also try to reset Firefox:
*https://support.mozilla.org/kb/Basic+Troubleshooting

Oracle taking too much memory in Linux

Hi.. I am using Oralce on linux 7.5
No any active session is running on server for oracle ..
But oracle taking too much memory in linux when I check with TOP command ..
16:08:29 up 19 days, 20:14, 2 users, load average: 5.32, 4.63, 3.78
227 processes: 226 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 2.5% 0.0% 2.9% 0.4% 0.0% 91.8% 2.2%
cpu00 3.8% 0.0% 3.8% 0.0% 0.0% 92.2% 0.0%
cpu01 0.4% 0.0% 0.0% 0.0% 0.0% 99.5% 0.0%
cpu02 0.8% 0.0% 4.7% 1.7% 0.0% 85.7% 6.8%
cpu03 5.1% 0.0% 3.0% 0.0% 0.0% 89.6% 2.1%
Mem: 8203404k av, 8186192k used, 17212k free, 0k shrd, 7292k buff
6266516k actv, 1275016k in_d, 136704k in_c
Swap: 6289384k av, 10528k used, 6278856k free 7602904k cached
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND
6224 oracle 15 0 1007M 1.0G 998M D 0.0 12.5 30:45 1 oracle
10628 oracle 15 0 1000M 998M 998M S 0.0 12.4 0:16 0 oracle
6230 oracle 15 0 945M 945M 943M S 0.0 11.7 82:33 1 oracle
10188 oracle 15 0 944M 942M 931M S 0.0 11.7 3:02 1 oracle
19128 oracle 15 0 909M 901M 899M S 0.0 11.2 2:49 2 oracle
6864 oracle 15 0 886M 886M 877M S 0.0 11.0 6:12 3 oracle
18586 oracle 22 0 883M 882M 880M D 1.9 11.0 1:15 0 oracle
6870 oracle 15 0 433M 432M 431M S 0.0 5.4 0:21 2 oracle
6421 oracle 15 0 337M 336M 335M S 0.0 4.2 1:07 2 oracle
8478 oracle 15 0 272M 271M 269M S 0.0 3.3 0:12 1 oracle
18250 oracle 15 0 256M 255M 252M S 0.0 3.1 0:38 0 oracle
6876 oracle 15 0 251M 250M 249M S 0.0 3.1 1:03 0 oracle
17926 oracle 15 0 225M 224M 223M S 0.0 2.8 0:01 1 oracle
19320 oracle 15 0 197M 196M 195M S 0.0 2.4 0:23 1 oracle
18116 oracle 15 0 168M 167M 165M S 0.0 2.0 0:04 2 oracle
19596 oracle 15 0 159M 158M 155M D 2.2 1.9 0:17 0 oracle
6228 oracle 15 0 156M 155M 142M S 0.0 1.9 12:05 1 oracle
18902 oracle 15 0 81612 71M 48364 S 0.0 0.8 3:07 3 oracle
19286 oracle 15 0 48420 46M 46412 S 0.0 0.5 0:03 0 oracle
6222 oracle 15 0 41496 40M 39684 S 0.0 0.4 9:38 3 oracle
19602 oracle 15 0 40324 38M 38164 S 0.0 0.4 0:00 2 oracle
5962 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 1 mysqld
5963 mysql 15 0 39168 38M 88 S 0.0 0.4 0:08 0 mysqld
5964 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5965 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5966 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5967 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5969 mysql 15 0 39168 38M 88 S 0.0 0.4 2:16 2 mysqld
5970 mysql 15 0 39168 38M 88 S 0.0 0.4 2:31 1 mysqld
5971 mysql 24 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5972 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
6868 oracle 15 0 27312 26M 15204 S 0.0 0.3 8:21 3 oracle
19554 oracle 15 0 20920 19M 18192 S 0.0 0.2 0:00 3 oracle
6874 oracle 15 0 16904 16M 15400 S 0.0 0.2 1:15 1 oracle
19444 oracle 15 0 13636 12M 12004 S 0.0 0.1 0:00 1 oracle
19442 oracle 15 0 12964 12M 11324 S 0.0 0.1 0:00 1 oracle
19474 oracle 15 0 12708 12M 11076 S 0.0 0.1 0:00 2 oracle
Why oracle taking too much memory?
Any solution for this bec of that my updation takes too much time .
Edited by: harshalpatil on Oct 13, 2008 4:11 PM

Harsh,
1) What version of Oracle you running on 7.5 release of linux?
2)How did you come to the conclusion that because of this, your update is slow?
Cheers
Aman....

Why do I have to run the plug-in container in my processes constantly in this version? It takes up too much memory!

The earlier version of Firefox did not run this plug-in container. Every time I would remove it from my processes it would kill videos etc. But, it was all fine in the older version of Firefox, so why the change? So I chose not to update Firefox. Then, the other day, I saw that is was automatically downloading and I turned off my computer because it wouldn't stop and I didn't give permission. When I got home I could not use Firefox and it took me hours to figure out how to get the internet back. Then I got Firefox back and this stupid process is running again. It takes up too much memory. I don't like a bunch of extra processes running like that. So, why can't I just use the old version? Is this process absolutely necessary?

In the past the memory usage would end up as part of the Firefox program. Now with OOPP you can see it as a separate process and that makes it more noticeable.
You can disable OOP if you want.<br />
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r42
# Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
I don't know if these three with different copyright dates are all needed:
# Version 0.9.17, copyright 2008-2010 Veetle Inchttp://www.veetle.com/
# Version 0.9.17, Copyright 2006-2009 Veetle Inchttp://www.veetle.com/
# Version 0.9.17, copyright 2006-2010 Veetle Inchttp://www.veetle.com/

Agent taking too much memory...

Hello all,
i am on hp-ux itanium. I have OMS(11.1) and agent running on this box. And for some reason the oracle process is taking too much memory. From the glance cmd at OS level, we get the below...Why is java taking some much memory...the only thing running on this box is OMS, agent, the repository DB and one other DB. This machine is 16gb of memory. Any idea where i can start digging to figure out why so much memory is being taken by java and emagent process ??? is that normal ?
java               25200 oracle        2.1    97   0.0   760.4mb   1.80gb SLEEP
emagent            27769 oracle        1.0    26   0.0   306.9mb   4.43gb SLEEP
java               24951 oracle        0.2    47   0.0   479.7mb   1.73gb SLEEP
ora_smco_RCA       24966 oracle        0.0     1   0.0   112.5mb 172.2mb SLEEP

Hi user;
Pelase see:
How To Effectively Investigate & Diagnose Grid Control Agent High Memory Utilization Issues? [ID 1092466.1]
11g Grid Control Agent Consumes High Virtual / Resident Memory and may Restart Frequently [ID 1194748.1]
Hope it helps,
Regard
Helios

OIM 11g using too much memory and not releasing it when shutting down

Hello,
we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
Thank you

You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
Sunny Tsang

Finer takes too much memory on yosemite! and keeps taking more and more until it gets the machine to it's knees! What to do???

Right after getting yosemite on my Macbook Pro with 16GB memory and SSD HDD. I find that after working for 30 minutes or so that the machine gets really slow, even switching between screens gets kinda of sluggish!!!
So i looked into the Activity Monitor and to my surprise i find that Finder is taking more than 4GB of memory just by itself and high percentage of CPU.
If i quit it, the machine goes back to being normal, but then Finder will restart, and again after 30 minutes or so, it does the same thing over and over.
I am sure that it's some kind of a bug, but i don't know where to start to solve this problem!!!
This never happened on previous OSXs.
If anyone have a hint it will be appreciated.
Thanks,

Problem description:
Finder keeps taking up too much memory thus slowing down the machine to it’s knees.
MacBook Pro 16GB Ram, SSD HD, AMD 1024GB
EtreCheck version: 2.1.2 (105)
Report generated December 11, 2014 at 10:44:31 PM GMT+2
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4 days 1:40:55
Disk Information: ℹ️
Crucial_CT960M500SSD1 disk0 : (960.2 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 958.97 GB (319.19 GB free)
Core Storage: disk0s2 959.34 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Western Digital Elements 10A8 1 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
MacProBackup (disk2s2) /Volumes/MacProBackup : 999.83 GB (280.78 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 1
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) [Support]
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.6) [Support]
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.6) [Support]
[not loaded] com.devguru.driver.SamsungComposite (1.2.44 - SDK 10.6) [Support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
[not loaded] com.wacom.kext.pentablet (5.2.1) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.44 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.44 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.44 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.44 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
MobileBrServ: Path: /Library/StartupItems/MobileBrServ
StartOuc: Path: /Library/StartupItems/StartOuc
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.notify.plist [Support]
Launch Agents: ℹ️
[invalid?] cn.com.zte.usbswapper.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.CS4ServiceManager.plist [Support]
[loaded] com.adobe.CS5ServiceManager.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[running] com.divx.update.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
[running] com.wacom.pentablet.plist [Support]
[running] HWPortCfg.plist [Support]
Launch Daemons: ℹ️
[running] cn.com.zte.PPPMonitor.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
smcFanControl Application (/Applications/smcFanControl.app)
gfxCardStatus Application (/Applications/gfxCardStatus.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
KiesViaWiFiAgent UNKNOWNHidden (missing value)
fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 1.1.0-4 [Support]
OVSHelper: Version: 1.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Unity Web Player: Version: UnityPlayer version 4.6.0f2 - SDK 10.6 [Support]
WacomSafari: Version: 1.1.0-4 [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
DivX Web Player: Version: 3.0 - SDK 10.5 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
iGetter Extension
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Growl [Support]
Java [Support]
Paragon NTFS for Mac ® OS X [Support]
Bad Fonts: ℹ️
Yelly.ttf: /Users/sambara/Library/Fonts/Yelly.ttf
Friends.TTF: /Users/sambara/Library/Fonts/Friends.TTF
Lush.ttf: /Users/sambara/Library/Fonts/Lush.ttf
Margarosa.ttf: /Users/sambara/Library/Fonts/Margarosa.ttf
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 958.97 GB Disk used: 639.78 GB
Destinations:
MacProBackup [Local]
Total size: 999.83 GB
Total number of backups: 28
Oldest backup: 2014-10-27 04:33:10 +0000
Last backup: 2014-12-11 20:15:00 +0000
Size of backup disk: Too small
Backup size 999.83 GB < (Disk used 639.78 GB X 3)
Top Processes by CPU: ℹ️
      8% com.apple.WebKit.Networking
      8% JavaApplicationStub
      7% WindowServer
      5% Unity
      1% coreaudiod
Top Processes by Memory: ℹ️
842 MB Finder
584 MB iTunes
529 MB com.apple.WebKit.Plugin.64
447 MB Unity
429 MB JavaApplicationStub
Virtual Memory Information: ℹ️
18 MB Free RAM
7.40 GB Active RAM
7.40 GB Inactive RAM
2.07 GB Wired RAM
133.47 GB Page-ins
2.32 GB Page-outs
Diagnostics Information: ℹ️
Dec 11, 2014, 04:10:55 AM WindowServer_2014-12-11-041055_Sams-MacBook-Pro-2.cpu_resource.diag [Details]
Dec 10, 2014, 08:20:17 PM Unity_2014-12-10-202017_Sams-MacBook-Pro-2.crash
Dec 10, 2014, 08:19:27 PM Unity_2014-12-10-201927_Sams-MacBook-Pro-2.crash
Dec 10, 2014, 08:11:16 PM Unity_2014-12-10-201116_Sams-MacBook-Pro-2.crash
Dec 10, 2014, 08:11:00 PM Unity_2014-12-10-201100_Sams-MacBook-Pro-2.crash
Dec 10, 2014, 08:10:26 PM Unity_2014-12-10-201026_Sams-MacBook-Pro-2.crash
Dec 9, 2014, 08:58:42 PM Finder_2014-12-09-205842_Sams-MacBook-Pro-2.cpu_resource.diag [Details]

Oracle Instances Processes consuming too much memory

Similar Messages

Maybe you are looking for