Oracle Integration Adapter for SAP R/3

I am working with a customer implementing Oracle EBS Release 12.2.
The customer has implemented SAP for financial modules and the oracle solution considers an EBS - SAP Integration for Receivables. Does anyone have any experience integrating Oracle EBS Receivables with SAP? Can you give us some guidance regarding EBS - SAP Integration best practices?
We have found a paper regarding Oracle Integration Adapter for SAP R3. We would like to have some information about what are the Oracle products we can integrate with SAP using Oracle Integration Adapter for SAP R3.
In case Oracle EBS can integrate with SAP using Oracle Integration Adapter, we would like to know if anyone has experience integrating Oracle EBS Receivables with SAP using Oracle Integration Adapter for SAP R3 for AR transactions and Receipts?
Any help would be very much appreciated.

Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

Similar Messages

Oracle AS Adapter for SAP R/3

Hello everyone.
I have some questions abuot the Oracle AS Adabter for SAP.
I have to get values out of miniSAP and integrate them in a BPEL Process. In SAP there is a function to generate a Webservice out of a BAPI for example! This Web Service I want to include in a bpel process. This is the way I try it till now!!!!
Now I read an article about the Adapter.
Is the task i explained abouve possible to do it with the adapter?
If yes, Can I include every BAPI in a bpel process with the adapter?
What are the prerequisites I need for the adapter? I have installed an Infrastructure, a Middle Tier (Portal) and the BPEL process manager.
Thanks a lot

Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

Logon problem with Oracle AS Adapter for SAP R/3

Dear All
I am getting below error, when trying to test the SAP Adapter. As seems from the message, its a credential problem, but the same user id/password works fine when using SAP Logon Gui Front-end client.
Any help/pointers highly appreciated.
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(Unknown Source)
at com.sap.mw.jco.JCO$Client.connect(Unknown Source)
at com.sap.mw.jco.JCO$Pool.initPool(Unknown Source)
at com.sap.mw.jco.JCO$PoolManager.getClient(Unknown Source)
at com.sap.mw.jco.JCO$PoolManager.getClient(Unknown Source)
at com.sap.mw.jco.JCO.getClient(Unknown Source)
at com.SAPTest.Main.main(Main.java:35)
Releasing connection
Further inputs/thoughts,
1. This must be a very basic, can it be because my user id/password does not have sufficient privilege?
2. I am using adapters_10131_win32.zip downloaded from Oracle, installed only SAP Adapter and then trying to connect using Adapter Application Explorer.
Regards.

Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

Oracle Adapter for SAP that supports Integration with SAP 6.0??

Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi Bhushan

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

Oracle Adapter for SAP

Respected Guys
I have an oracle-9i database connected with SAP and wants to transfer data from oracle9i database connected with SAP to an another oracle-9i database which is connected with a GPRS system.
Data about only sales has to be transfered from SAP to GPRS database (Oracle9i). I want to know the procudre of transfering data from SAP to GPRS database.
I know there is an Oracle9i Adapter which is used for this purpose. Anyone know about how to use the Idocs or ALE for this purpose.Or if anyone is aware of use of Oracle9i Adapeter. We are using Oralce9i with SAP4.6 and the database connected with GPRS is also oracle9i.
http://www.oracle.com/technology/products/integration/adapters/pdf/DS_OracleASAdapter_SAP.pdf
Thnx

Hi,
I checked the following document under the section: Adapter Features / Supported Versions and Platforms.
Oracle® Application Server Adapter for SAP User's Guide 10g Release 3 (10.1.3.1.0)
I could find that the SAP 6.0 is supported by the adapter that comes with OAS 10.1.3.1
Thanks,
Sasi Bhushan

When is Oracle Adapter for SAP 10.1.2.0.2 released?

Hi,
I'm desperately waiting for the release of the Oracle Adapter for SAP
10.1.2.0.2. It is stated as Projected on the Download site.
I do still have serious problems with bug 2574376. This bug was fixed already
in July 2004. In that bug is stated that it is fixed in 10.1.2.
I am using the workaround to kill the process. But when I kill the process while the
adapter is processing data for update in SAP, I am losing that data. So the
update does not take place in SAP and the data is not in the persistence
anymore.
So please release this version!
Regards,
Aard-Jan

Yes, but not for HPUX jet. And that is what I need.
Via Metalink I heard that it will be available around august.

Archiving: experience with Oracle's Archive Adapter for SAP

All,
Does anyone have experience to share about Oracle's "Content Database Archive Adapter for SAP Applications"?
Thanks
Guenther

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

Payload Streaming (for handling large payload) in Oracle JCA Adapter for AQ

Hi All-
Oracle Documentation indicates that it supports Payload Streaming in Oracle JCA Adapter for AQ. Link http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_aq.htm#CBAIAABF
However when I tried configuring an AQ Adapter in Jdeveloper, I was not able to see the check box for enabling Payload Streaming.
Do we have to manually update the .jca file to add the property "EnableStreaming" in the AQ Adapter Activation Spec? Is it supported and is it going to work?
What is the Message Size limit that the AQ Adapter can handle?
Please let me know.
Thanks,
Dibya

If the StreamPayload property does not exist, then the default value false is assumed.
<activation-spec className="oracle.tip.adapter.aq.inbound.AQDequeueActivationSpec">
<property name="QueueName" value="RAW_IN_QUEUE"/>
<property name="DatabaseSchema" value="SCOTT"/>
<property name="StreamPayload" value="true"/>
</activation-spec>
you can add <property name="StreamPayload" value="true"/>
to the .jca file but rememeber This property is applicable when processing Raw messages, XMLType messages, and ADT type messages for which a payload is specified though an ADT attribute.

Exception occurred when tried to install Weblogic Adapter for SAP 7.0

Hi,
          I tried to install current available Weblogic Adapters for SAP 7.0 into weblogic platform 8.1 sp3, I got the following exceptions. Those exceptions can be reproduced when to deploy BEA_SAP_1_0_70.ear into a weblogic integration domain. Based on BEA Weblogic Adapter for SAP installation guide, there should be a new version of adapter for SAP, such as BEA_SAP_8_1.ear, but for some reason, I couldn't find it. The following are error messages, please help.
          Thanks,
          pg
          ------------- error message ------------------
          <Jul 28, 2004 3:01:41 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating Deploy task for application BEA_SAP_1_0_70.>
          <Jul 28, 2004 3:01:41 AM EDT> <Error> <Deployer> <BEA-149201> <Failed to complete the deployment task with ID 2 for the application BEA_SAP_1_0_70.
          weblogic.management.ApplicationException:
          Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 2
          Module: BEA_SAP_1_0.rar Error: Error parsing file at line: 36 column: 27. weblogic.xml.process.XMLParsingException: Error parsing file at line: 36 column: 27. The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)". - with nested exception:
          [org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".]
          org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".
          at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1189)
          at weblogic.xml.jaxp.WebLogicParser.parse(WebLogicParser.java:67)
          at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:154)
          at weblogic.connector.deploy.dd.xml.WeblogicRarLoader_Connector10.process(WeblogicRarLoader_Connector10.java:170)
          at weblogic.connector.deploy.dd.xml.DDUtil.processDDFile(DDUtil.java:380)
          at weblogic.connector.deploy.dd.xml.DDUtil.processWeblogicRaDD(DDUtil.java:218)
          at weblogic.connector.deploy.dd.xml.DDUtil.processDDFiles(DDUtil.java:126)
          at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:602)
          at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:577)
          at weblogic.connector.deploy.ConnectorModule.loadConnectorDescriptors(ConnectorModule.java:693)
          at weblogic.connector.deploy.ConnectorModule.loadDescriptor(ConnectorModule.java:202)
          at weblogic.j2ee.J2EEApplicationContainer.loadDescriptors(J2EEApplicationContainer.java:1379)
          at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1204)
          at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051)
          at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444)
          at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394)
          at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310)
          at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
          at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
          at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
          at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Hello,
          You may have a lot of greif if this is the wrong version of adaptor for 8.1. I too was directed to this EAR file when looking for the 8.1 adaptor. The problem looks like it is in the weblogic-ra.xml file in BEA_SAP_1_0.rar. The some of the xml entries for <map-config-properties> loo incomplete:
          <map-config-property>
          <map-config-property-name>bselocation</map-config-property-name>
          </map-config-property>
          <map-config-property>
          <map-config-property-name>bseeis</map-config-property-name>
          </map-config-property>
          Are missing a value tags.
          You can try adding some dummy ones in order to get passed the SAX exception but you may run into more problems. (I was going to install this my self but never got round to it in the end).
          Good Luck

Using Oracle Apps Adapter for apps_applcon user

Hi,
We are trying to use oracle apps adapter for our BPEL flows using FM11g (Jdev11gR1). We came to know that it will work for only apps user.
We have apps_applcon user. How can we use that?
Is there any way we can tell oracle apps adapter to user apps_applcon user?
Any help would be greatly appreciated.
Thanks in advance.
Thanks & Regards,
Rama Krishna. P

We also have same requirement. We have BPEL connection using custom oracle user, xx_b2b and when we use APPS adapter, I can not see and use any business event.
If anybody across same requirement, please share your experience.
Appreciate help on this.
Thanks,
Sonartori

Tuning Oracle Integration Adapters for Performance

Hi,
I would like to know about tuning Oracle Applications adapter for performnace .
I got a document for performance tuning of BPEL PM. I am searching for similar kind of document which helps to fine tune the adapters for performance.
Please help me
Regards,
Sundar

Hi,
Oracle JDeveloper 11g 11.1.2... doesn't include the SOA and WebCenter pieces - to use these components you'll need to download Oracle JDeveloper 11.1.1.6.0...
http://www.oracle.com/technetwork/developer-tools/jdev/downloads/jdeveloper11116-1377208.html
You will also need the Fusion Middleware Extensions for JDeveloper... Oracle SOA Composite Editor...
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml
Hope this helps...
Cheers,
Vlad

New Features of BOE 4.0 integration kit for SAP

Dear colleagues,
I am looking for a presentation that shows the new features of SAP BOE XI 4.0 integration kit for SAP (BW), compared to XI 3.1. I have for example read that regarding WebI it will be possible to connect directly to BEx queries without universe. It is correct ?
I look to several documents on the market place, but there is no clear document about these new features...
Thanks for your help.
Regards,
Thibaud

no "integration kit" in version 4 - its all nicely embedded into the core product.
you are correct - webi can direct connect (using BICS) and also can source from an Analysis View (which is an output of either Analysis Services OLAP edition or the Microsoft edition (excel plugin). you also get a new universe layer (.UNX) which gives you a much better view of your underlying BEx queries/Cubes and allows you to combine with aother data sources.
lots more info in the product manuals to v4 which are available at...
http://help.sap.com/businessobject/product_guides/
(just change the product drop down to "SAP BusinessObjects Business Intelligence Platform"
some specific info on SAP BW connectivity is here...
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_sap_olap_univ_en.pdf
cheers,
Jeremy

URL to download BO XI 3.1 SP3 Integration kit for SAP Solutions

HI
I have Installed BO XI 3.1 SP3 Enterprise in the server.I want to Install BO XI 3.1 SP3 Integration kit for SAP solutions.
1)I want to know what is the order of Installations i need to install in case of Crystal Reports and Xcelsius,BI,SAP GUI.
2)Give me the link to Down load above version Integration Kit.
3)What are Installations Compulsory before installing BO XI 3.1 SP3 integration kit SAP solutions and give some more brief Idea

hi,
You can use this link:https://websmp101.sap-ag.de/bosap-support
then:
Software Downloads>BusinessObjects Downloads>Browse the SAP BusinessObjects Portfolio>Installation and Upgrade>SBOP INTGR. FOR SAP-->BOBJ INTGR. FOR SAP XI 3.1
then you can see it.
lory

Oracle Integration Repository for API's.

Where can I find the Oracle Integration Repository for all the API's related information for R12. Initially i used to go through this site http://irep.oracle.com/index.html
for API related information for 11i, even this is not working. For R12 the Integration Repository is delivered as a Responsibility internally when EBS is Deployed. Is there Any way to Accesses it externally on WEB similarly like 11i one?
Thank's in Advance.

Hi;
Please check below which could be helpful for your issue:
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
Regard
Helios

Oracle Integration Adapter for SAP R/3

Similar Messages

Maybe you are looking for