Oracle intelligent agent executable has encountered a problem and needs to

Hi All,
I am getting the following message after commence of OS (windows XP) on my LAPTOP.
"Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
Thanks in advance.

Hi Tapash,
You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
[OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
Regards
Peter

Similar Messages

Cisco agent desktop has encountered a problem and needs to close error

A Remote Hotline user is experiencing crashes with her desktop agent. After logging into the program it generated the error message "The Cisco Agent Desktop has encountered a problem and needs to close"
I have removed the agent from add remove programs, re installed it and attempted to run it logged in as an admin and using both mine and the user's agent credentials and the program still crashes.
Agent desktop ver 5.0 Build 6.4.2.12 Windows XP
Any ideas?
Regardes, Chet

Thanks for the reply, this is what I did to resolve it:
Fix:
Uninstalled Desktop agent from add remove programs
Re installed program
Do a complete restart or the prog will continue to crash
Test program by logging in with user’s credentials

(My Labview built executable) has encountered a problem and needs to close.

All,
I've built a labview executable that interfaces with GPIB and the Texas Instruments EV2300 via USB.
The VI runs beautifully on the development machine, and I built the VI into an executable and it runs fine on the development machine. So I built an installer that installs the Labview 2010 runtime environment on the target computer. I ran the installer on a production line computer that I know can run GPIB and the EV2300, but when I try to start the executable I get an error that says "(your application) has encountered an error and needs to close."
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
I'm not doing anything weird with the file paths in my program, just creating paths from strings using the canned VI for converting strings to paths. In the course of the program, I read a few text files and write one.
Is there anything I need to know about how to build an application with an installer? I need to get this up and running so the test program can run on a production line.
Ro ma wa ichi ni chi ni shi te na ra zu
Solved!
Go to Solution.

RTSLVU wrote:
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
Sounds like a VISA problem. Download and install the latest VISA runtime on the target machine.
Ditto that! At least One of the installed drivers on the target does not have LabVIEW 2010 support. Check MAX and NI.com to resolve all the drivers on the target that have no support for 2010.
And yes, you may need to re-qualify the pre-existing exe's- if their code changes to use the new drivers If you are in a heavilly regulated industry. If so, It might be easier to build in an older LabVIEW version. Very sad- but it might even be simpler to incorporate the Unit Test Framework to handle regession testing of older code with newer drivers.
Worse- What if the exe's were built with a legacy version of LabVIEW that is no longer supported by the latest Drivers?
Time to start thinking of life cycle maintenance plans- with a 5 year upgrade required!
Jeff

Lookout Direct error: "Logos executable has encountered a problem and needed to close."

I'm using Lookout Direct 4.5.1 (build 19) and see the following error after logging in to Windows XP Home:
Logos executable encountered a problem and needed to close.
I created a new process, added a hypertrend object, saved, rebooted, and the error did not occur after the first reboot but started again after subsequent reboots.
I spoke with Automation Direct tech support and they recommended typing the following two commands at a command prompt:
lktsrv -remove
lktsrv -install -manual
I tried this, rebooted and the error persisted. Any ideas on what else to do here?
Yesterday I had been working on finishing up a project using Lookout Direct and this error started occuring. I reformatted the computer, reinstalled Lookout Direct and had no problems. Today the error started again. The only other software I had installed on this PC was Automation Direct's DirectSoft 5.
The guy I spoke with at Automation Direct said there was once a form or post on NI's site detailing a method to fix this problem but since recent website changes he is no longer able to find it. Is anyone here familiar with that?
Best regards,
Dave
Message Edited by davey31415 on 04-05-2010 02:15 PM
Message Edited by davey31415 on 04-05-2010 02:16 PM

I saw the Logos executable error twice more and also ran into a "waiting on time service error" when opening Lookout Direct, the latter of which prevented Lookout Direct from opening at all.
In both cases removing and reinstalling the services fixed the problem (reboot afterwards). If anyone is dealing with either of these errors I'd suggest typing the following into a command prompt (start -> run -> cmd):
lktsrv -remove
lktsrv -install -manual
lkcitdl -remove
lkcitd -install -manual
You should see a dialog box which requires you to click OK and states that removal was successful after the two -remove commands.

Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry

I have installed oracle10g release2(10.2.0.1.0) in my system
my porblem when i am trying to issue command
SQL> commit;
Commit complete.
SQL> cl scr;
then it is show below mentioned error
Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience.
Please can anybody help for me.
with regards,
srinivas.

When working with mixed environments you should make sure the path environment variable is consistent with the executables you are currently running, and try not to mix them, i.e. if you are working with the sqlplus from 9i, make sure you execute the sqlplus.exe file from the 9i oracle home and temporarily by means of a batch file put your Oracle Home 9i executables prior to those of 10g , and the other way around, when executing from the 10g make sure all executables and paths are consistent. It should be easier since when installing oracle, oracle configures the PATH environment variable so it can be seen first in the path environment variable.
In your case you are using two compatible versions, but if the dll's get mixed there could be unexpected results.
~ Madrid
http://hrivera99.blogspot.com/

Oracle Forms Designer has encountered a problem and needs to close

Dear All,
I got the following error when I compile the form,
Oracle Forms Designer has encountered a problem and needs to close
I am using Oracle 10g Developer suite(Forms 32 Bit Version 10.1.2.0.2)
and Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
and Window Xp Professional 32 Bit Operating system
Now I can't do any changes in the form.
I searched lot of oracle forums .but i can't solve it.
Please give me one solution
I am strugling this issue.
Please help me........
a lot of thanks in advance.
Thanks and Regards,
Fazil

Hi,
I am doing the bug fixing in the existing form.Its size is 4.07 MB.when i will get the mentioned error.then i will take previos fmb.then again doing the changes after some time agin will come the mention error.I added some if else condtion code.Its a small code.I think its not a reason for the mentioned error.I think something is happended.I don't know what happened?
Please help me..
Thanks and Regards,
Fazil

Oracle SQL*PLUS has encountered a problem and needs to close

When I have done like below,
C:\Documents and Settings\himanshu.chaudhari>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 14 07:38:22 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys@dev as sysdba
Enter password:
Connected.
SQL> spool e:/spool/test.log
SQL> @e:/spool/ms_script.sql
Got error like ,
Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience.
AppName: sqlplus.exe AppVer: 0.0.0.0 ModName: oranls10.dll
ModVer: 10.2.0.1 Offset: 0005d6ff
I am using,
Operating System: Microsoft Windows XP Professional Version 2002 Service Pack 3,
Have two different oracle client on same drive
1) 10.2.0.1.0
2) 8.1.7.4.0
I have tried,
Run selecthome.bat from BIN but got same error,
Run sqlpus.exe from particular home then also got same error..
So , Please anyone can have some idea regarding the same ?

Is there any other error in error.log file?
What do you run in that (ms_script) script?
Have you used both sqlplus?
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Reports Builder has encountered a problem and needs to close.

Hi All,
The report builder in my system is behaving weirdly. If I open a report, which is having a normal browser output, it allowing me to see the data model, layout model and everything. And if I open a report, which is having a PDF output, it's not allowing me to open the Layout.
Here the output is in context of Oracle Applications front-end. And as I know it shouldn't be a problem with Report Builder.
It errors out with the following message.
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
And the error report contains the following message.
AppName: rwbld60.exe     AppVer: 3.0.0.0     ModName: mmc60.dll
ModVer: 0.0.0.0     Offset: 0000c533
Here is the version information:
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser     1.0.2.1.0     Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
I have tried reinstalling the software a minimum of 10 times, but no luck. At last I got my system formatted and tried. For the first time it worked for me, then I installed Forms Builder... then again I am getting the same problem even though I have different homes for Reports and Forms.
Is it problem with my system or the Operating System or the version of the Oracle Developer?
Can anyone please help me out?
Thanks in advance,
Lakshman.

I have been having a similar problem and do not know if this will apply to your situation but I found the following on Metalink.
Subject:      Reports Builder Crashes Opening the Paper Layout on Large Reports on XP/2003
     Doc ID:
Note:566304.1     Type:      PROBLEM
     Last Revision Date:      18-AUG-2008     Status:      PUBLISHED
In this Document
Symptoms
Changes
Cause
Solution
References
Applies to:
Oracle Reports Developer - Version: 10.1.2.0.2 to 10.1.2.3
Microsoft Windows XP
Microsoft Windows Server 2003
Symptoms
Oracle Reports Builder crashes opening the Paper Layout on some large reports but ONLY on the following platforms:
     Microsoft Windows XP Professional
     Microsoft Windows Server 2003
Reports Builder displays the below message and then crashes:
Reports Builder
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
[Send Error Report] [Don't Send]
--> click on [Don't Send] button and Report Builder disappears.
-and/or-
access violation in oranls10.dll
This problem does not reproduce on:
     Microsoft Windows 2000
The solutions in the below note do not work on v. 10.1.2.2.0 and 10.1.2.3.0:
Note 361206.1 Title: Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Changes
Upgraded to Oracle Report Builder v. 10.1.2.x.x from a previous release.
Cause
Bug 7014048 is fixed in one-off Patch 5335195 (Base Bug) but missed inclusion (ie. was not ported to) in latest Developer patchset v. 10.1.2.3.0
See also:
Bug 7014048 Abstract: REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Bug 5029530 Abstract: REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Solution
To implement the solution, please execute the following steps:
1. Download one-off Patch 5335195 for v. 10.1.2.0.2 to the XP/2003 box.
2. Back up existing uiw.dll for 10.1.2.3 880KB 10/10/2006 7:23PM --> uiw_orig_10.1.2.3.zip
3. In the %ORACLE_HOME%\bin directory, replace uiw.dll (880KB) with the uiw.dll (1,316KB) from
Patch 5335195 --> 1,316KB 7/24/06 11:12PM
4. Re-launch Report Builder 10.1.2.3.0 on XP/2003.
5. Open the <large report>.rdf.
6. Double-click on the Paper Layout icon.
7. The result should be: Successfully open the Paper Layout for <large report>.rdf.
References
Bug 5029530 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Bug 7014048 - REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Note 361206.1 - Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Patch 5335195 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL DUE TO ACCESS

Getting "adobe Reader has encountered a problem and needs to close

On Windows XP service pack 3. Adobe Reader X
Get "Adobe Reader has encountered a problem and needs to close." . I have uninstalled adibe and reinstalled it and problem came back within 2 weeks after working for a short time.

Try the following:
Uninstall Adobe Reader X
Reboot your computer
Delete directory C:\Program Files\Adobe\Reader 10.0
Download the EXE or the MSI installer from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/ and execute e.g. either of the following files:
AdbeRdr1010_en_US.exe
AdbeRdr1010_en_US.msi
Good luck!

Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
== This happened ==
Every time Firefox opened
== after loading firefox 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

"iTunes has encountered a problem and needs to close." Anyone?

"iTunes has encountered a problem and needs to close." This is what, i get whenever I try to sign onto my Itunes. I have had an Itunes account since 2005 and have never had a problem with upgrades. Then I try to upgrade to 8.0 3 months ago, and haven't been able to fix it since.
My husband just recieved an Ipod for xmas, and want to be able to access Itunes.
So, again, I deleted it from my PC and tried downloading 8.0 and previous versions and still get the samething. "iTunes has encountered a problem and needs to close." Any suggestions?

I have a computer with *Microsoft XP Home Edition* software:
After spending DAYS trying to uninstall/install itunes for our new Ipod Nano, I read the article about deleting 'Quicktime' from System32. This alone did not work for me, so I did a 'Start/Search' and entered 'Quicktime' and searched all my hard drives. I removed all entries found to the recycle bin. Then I did the same for 'itunes', removing entries to the recycle bin. I think I had a lot of miscellaneous old garbage stored on disk that caused install problems.
*LOW & BEHOLD*, I was able to install and 'EXECUTE' itunes. Hope this helps.

Export op results in error "EXP.EXE has encountered a problem and needs to

I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
(1) The "Save As" dialog was displayed (as expected).
(2) A EXP.EXE script window opened for the Export command and displayed the following:
Export: Release 9.0.1.5.1
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
(3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
Any ideas how to fix this problem?
If it can't be fixed, are there other ways of transferring data from one repository installation to another?

add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

AS 10gR1 vs "Apache.exe has encountered a problem and needs to close" on XP

I would really appreciate if somebody has solution for Windows error message popup box
"Apache.exe has encountered a problem and needs to close".
I have installed Oracle Application Server 9.0.4 Infrastructure (from 10gR1 AS) on XP laptop (I know it is unsupported)
opmnctl.exe status show "UP" status for OID,OC4J but "Down" for HTTP_Server
When I try to run
opmnctl.exe versbose startproc ias_component=HTTP_Server
I will always get "result=failure", text="failed to start a managed process after the maximum retry limit"
and Windows message popup box
"Apache.exe has encountered a problem and needs to close".
(I have also 9i and 10g installed in separate Oracle homes).

I have made 3rd attempt to re-install AS due "Apache.exe has encountere..and must be closed" error.
I have succeeded after doing following:
- unistall previous AS 9.0.4 (10gR1) install
- disabled McAffee and firewall
- changing NLS_LANG=AMERICA_AMERICAN.WE8ISO8859P15 prior installation
- removed path to other OH (9i and 10gR2)
- restart XP laptop
- doing install AS 9.0.4 (10gR1)
Now opmnctl.exe status shows everything works (including HTTP_Server :)

Java.exe has encountered a problem and needs to close.

I installed Oracle8i on my P4 then when I reboot I get the error "java.exe has encountered a problem and needs to close." even if I click on "don't report" if keeps popping up, anything to do to resolve this?
Thanks.

Hello...
i had the same problem. then when i searched oracle documentation, it suggested as follows:
1. go to your %ORACLE_HOME%\Apache\Apache\conf\httpd.conf
2. comment out 2 lines that has
include ....\jserv.conf
include ....\oracle_apache.conf
so your new line will be:
#include ....\jserv.conf
#include ....\oracle_apache.conf
Those lines are at the end of the file.
3. save the file.
4. reboot your machine.
that solution works for me.. hope it works for you too.
GOOD LUCK!
--Melani

Microsoft Office Excel has encountered a problem and needs to close

Hi,
I am executing the following code in an excel application and while closing excel I am getting the error
'Microsoft Office Excel has encountered a problem and needs to close'.
EnterpriseSession boEnterpriseSession;
ReportEngines boReportEngines ;
IReportEngine boIReportEngine;
CrystalDecisions.Enterprise.SessionMgr loginSessionManager = new CrystalDecisions.Enterprise.SessionMgr();
CrystalDecisions.Enterprise.EnterpriseSession boEnterpriseSession = loginSessionManager.Logon("userName", "password", "cms", "authentication");
                    int iMinuteNumber = 1;
                    int iLogonNumber = -1;
                    string strToken = boEnterpriseSession.LogonTokenMgr.CreateWCAToken("", iMinuteNumber, iLogonNumber);
                    boReportEngines = new ReportEngines(strToken);
                    boIReportEngine = (IReportEngine)Session.boReportEngines.getService(ReportEngineType.WI_ReportEngine);
The exception that is displayed while debugging is 'BusinessObjects.ThirdParty.OOC.OB.AssertionFailed'.
Thanks,
Divya
Edited by: dpanicker on Jun 23, 2010 6:47 AM
Edited by: dpanicker on Jun 23, 2010 7:26 AM

I'm curious how you are running this code within excel as I would expect you would've had to write a dll to expose the SDK as COM in order to be able to access it from an excel document.

Oracle intelligent agent executable has encountered a problem and needs to

Similar Messages

Maybe you are looking for