ORacle is not starting..

Hi..
I am using oralce 10g om windows machine .
my oracle is sudendly down ..
when I am trying to start it .it mount and give error as end of the communication error.
And in alert log file I get this error ..
Mem# 0 errs 0: C:\ORACLE\PRODUCT\10.2.0\DB_1\ORADATA\ORCL2069\REDO02.LOG
Block recovery completed at rba 21719.1507.16, scn 0.3240444804
Fri Nov 07 16:45:16 2008
SMON: slave died unexpectedly, downgrading to serial recovery
Fri Nov 07 16:45:16 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_smon_240.trc:
ORA-00600: internal error code, arguments: [kghstack_free2], [], [], [], [], [], [], []
Fri Nov 07 16:45:18 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_smon_240.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [kghstack_err+95] [PC:0x4F14339] [ADDR:0xFFFFFFFFFFFFFFFF] [UNABLE_TO_READ] []
ORA-00600: internal error code, arguments: [kghstack_free2], [], [], [], [], [], [], []
Fri Nov 07 16:45:22 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_pmon_8784.trc:
ORA-00474: SMON process terminated with error
Fri Nov 07 16:45:22 2008
PMON: terminating instance due to error 474
Fri Nov 07 16:45:22 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_m000_392.trc:
ORA-00474: SMON process terminated with error
Fri Nov 07 16:45:22 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_lgwr_6164.trc:
ORA-00474: SMON process terminated with error
Fri Nov 07 16:45:22 2008
Errors in file c:\oracle\product\10.2.0\admin\orcl2069\bdump\orcl2069_q000_8564.trc:
ORA-00474: SMON process terminated with error
Can you tell mi the reason and solution for this issuue?

harshalpatil wrote:
I checked as select * from dba_rollback_segs
I found that one of the segment for UNDO is OFFline is this root cause of error?No, the segment can be offline just like that. Its the feature of Automatic Undo that Oracle would keep on switching them on /off depending upon the requirement.
I asked you to set the event to disable the transaction recovery for the database.
In the other workaround, you may want to disable the IMU by putting
_in_memory_undo=falseBeware, any setting like this needs Oracle support's consent beforehand or it MUST not be done.
HTH
Aman....

Similar Messages

Oracle does not start

Hi,
I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
What can I do to start oracle with or without internet connection.
On windows I used a loopback adapter. Is here any method?
Thank you

Hello,
ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
http://www.informit.com/articles/article.aspx?p=25845
From the below documentation:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
"+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
Hope this help.
Best regards,
Jean-Valentin

Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1.     ibc6-i386
2.     libaio_0.3.104-1_i386.deb
3.     bc
4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer

Oracle does not start automatically ORA-01031: insufficient privileges

Hi,
OS WS2008R2.
ORACLE 11gR2.
Oracle Instance does not start with oracle services but if i stop and restart the services it comes up clean.
Moreover if i change service ownership to Domain\Administrator it again works well.
Checked registery and all ok. No error in alert.log. Only clue found in Oradim.log.
ORADIM.LOG....
C:\Oracle\Ora11g\bin\oradim.exe -startup -sid ptdb -usrpwd * -log oradim.log -nocheck 0
Thu Nov 15 15:16:15 2012
ORA-01031: insufficient privileges
Please help
Thanks

1- startup type- Auto
2- Group to user- ORA_DBA
3 - you can check log on tab in the service properties and set the username and password who responsible about this services
As i already stated 3 works. but i want it to work under Local System and not under any user.
Thanks

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle Essbase not starting up

Hi,
We are having issues with oracle essbase server in our oracle Hyperion planning system. The ./opmncl startall process gives below error. checked OPMN log and it says, JVM initialization and singleserver signon are succesfull. However, i see errors in the leasemanager_essbase log. Not sure what this log contains. thanks for help
./opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=bmaps-ess01:6712
0 of 1 processes started.
ias-instance id=EPM_ess01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
EssbaseCluster-1/EssbaseAgent/AGENT/
Error
--> Process (index=0,uid=0,pid=0)
Service fail over start failure
Log:
none
--> Process (index=1,uid=2078161822,pid=22635)
failed to start a managed process after the maximum retry limit
Log:
/hyperion/Oracle/Middleware/user_projects/ess01/diagnostics/logs/OPMN/opmn/c onsole~EssbaseCluster-1~EssbaseAgent~AGENT~1.log
[hyperionadmin@BMAPS-ESS01 bin]$ ./opmnctl status
Processes in Instance: EPM_ess01
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
EssbaseCluster-1 | EssbaseAgent | N/A | Down
The lease manager log
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-41] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Odbc Driver [DataDirect 6.0 Oracle Wire Protocol]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-40] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Host [bmaps-db01.ocfo.dc.gov] and port [1521]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-42] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Service Name [BMAPSSNP.OCFO.DC.GOV]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-44] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] User [HSS]
[2012-10-05T11:23:57.126-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:57.128-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:59.133-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:59.134-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:01.140-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:01.141-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:03.146-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:03.147-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:05.152-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:05.153-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.158-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-1] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Failed to acquire the lease after [6] consecutive attempts.
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-16] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Lease is being surrendered.
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-11] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Preparing to shutdown abort.
[2012-10-05T11:24:09.161-15:24] [ESSBASE0] [LM-12] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Terminating the process.

Hi,
Is your Database started properly?
Since it seems that EPM components are not able to communicate with the Database.
You can use the following steps to start Database [if Oracle]-
1. START TNSLISTNER FIRST      --- cd <bin folder for the Oracle Database> AND THEN ./lsnrctl start
2. START EMCTL Database        --- cd <bin folder for the Oracle Database> AND THEN ./emctl start dbconsole
8. START DATABASE              --- cd <bin folder for the Oracle Database> AND THEN ./sqlplus
9. Log on to                --- https://<IP address for Database server>:1158/em and click on startup and provide the necessary detailsFollow the steps to start the database if database not starting properly
Thanks,
HyperEPM

Oracle Database Not Starting Up Properly

On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle Service not starting on Win 7

Hi,
Ive just installed Oracle 11g (11.2.0) on my Win 7 home edition. All the oracle services except 'OracleServiceORCL' have started. The below error is recorded in Windows Event Viewer. Error 1067 pop up comes after unsuccessful startup attempt is done.
Faulting application name: ORACLE.EXE, version: 11.2.0.1, time stamp: 0x4bb1e12b
Faulting module name: dbghelp.dll_unloaded, version: 0.0.0.0, time stamp: 0x41e594d4
Exception code: 0xc0000005
Fault offset: 0x000000000c795f4f
Faulting process id: 0x1f94
Faulting application start time: 0x01cda467aa4166fc
Faulting application path: c:\app\jsr\product\11.2.0\dbhome_1\bin\ORACLE.EXE
Faulting module path: dbghelp.dll
Report Id: e888bd29-105a-11e2-9481-8e2ecabfd045
Please can someone assist me on how can I get the Service up and running.
Thanks in advance.

Hi All,
I Have done a fresh installation of Oracle 11g database on my PC. Once the installation got over, Oracle services were started, and I was able to use the database as normal.
Now after rebooting the PC, when I again restarted the Services, I am once again getting the below error on starting OracleService:-
Error 1067: The process terminated unexpectedly.
Error from Windows Event Viewer:-
Faulting application name: ORACLE.EXE, version: 11.2.0.1, time stamp: 0x4bb1e12b
Faulting module name: dbghelp.dll_unloaded, version: 0.0.0.0, time stamp: 0x41e594d4
Exception code: 0xc0000005
Fault offset: 0x000000000c7a5f4f
Faulting process id: 0x23e4
Faulting application start time: 0x01cdb4e47f58e263
Faulting application path: c:\app\jsr\product\11.2.0\dbhome_1\bin\ORACLE.EXE
Faulting module path: dbghelp.dll
Report Id: bde4476f-20d7-11e2-a6ec-e1b45921825a
I have download from the below link for my 64-bit Windows Home edition. I have installed it many times since this version was released, but not sure why this Erro 1067 comes up during past few months onwards.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Please can someone assist me to resolve this issue.
Thanks in advance.
Edited by: Sandyboy036 on Oct 28, 2012 4:11 PM

Oracle is not starting (ORA-27102: out of memory)

Hi All,
We have installed successfuly SAP Netweaver EHP1(SR1) (ABAP and Java) with SUNOS & Oracle10 on the same server.
After installation we have stopped the java instance and tried to start but the database is not starting and it is showing the error
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Then we have added project in /etc/project
NWJ:500:SAP System NWJ:nwjadm,oranwj::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)
but it doesn't resolve the issue.
Even we have stopped the Abap instance including database but no use.
Can any one provide the soluion ASAP.
Regards,
Venu

Hello,
I've hit this ORA-27102 several times when installing on Solaris 10. The problem was that SAPINST (which runs as root) runs its child processes under the root project, even though they have user ID ora<sid> or <sid>adm. Because the root project often has shared memory limited to 2 GB, Oracle fails with ORA-27102 if it needs more than 2 GB.
I'm not quite sure that the above problem corrseponds with yours though. Is SAPINST finished and are you logged in as ora<sid> or <sid>adm and running SQLPLUS manually? If so, make sure that you are indeed running in the correct project. Commands that can help:
id -p
ps -e -o pid,comm,project | grep sqlplus
Regards,
Mark

Oracle instances not starting

So,
We tried to bring our Oracle 10g RAC cluster back online on Monday and have been having issues getting the instances to come up. Here's what we've seen so far:
[oracle@db1-dev bin]$ ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE db1-dev
ora....EV.lsnr application ONLINE ONLINE db1-dev
ora....dev.gsd application ONLINE ONLINE db1-dev
ora....dev.ons application ONLINE ONLINE db1-dev
ora....dev.vip application ONLINE ONLINE db1-dev
ora....SM2.asm application ONLINE ONLINE db2-dev
ora....EV.lsnr application ONLINE ONLINE db2-dev
ora....dev.gsd application ONLINE ONLINE db2-dev
ora....dev.ons application ONLINE ONLINE db2-dev
ora....dev.vip application ONLINE ONLINE db2-dev
ora.orcl.db application ONLINE OFFLINE
ora....l1.inst application ONLINE OFFLINE
ora....l2.inst application ONLINE OFFLINE
[oracle@db1-dev bin]$./crs_start ora.orcl.orcl1.inst
Attempting to start `ora.orcl.orcl1.inst` on member `db1-dev`
Start of `ora.orcl.orcl1.inst` on member `db1-dev` failed.
db2-dev : CRS-1018: Resource ora.db1-dev.vip (application) is already running on db1-dev
CRS-0215: Could no start resource 'ora.orcl.orcl1.inst'.
[oracle@db1-dev bin]$ ./srvctl start instance -d orcl -i orcl1
PRKP-1001 : Error starting instance orcl1 on node db1-dev
CRS-0215: Could not start resource 'ora.orcl.orcl1.inst'
[oracle@db1-dev bin]$ ./crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[oracle@db1-dev bin]$
We have two nodes in our RAC cluster (db1-dev and db2-dev). Both nodes run on linux as well. I've also tried using the "srvctl" command to remove and add the instances as well as the database. That has not seemed to change our situation.
Any help would be greatly apprecited.
Thanks in advance.

So,
I attempted to use SQLPlus to start the instances and I received TNS listener errors:
[oracle@db1-dev bin]$ sqlplu /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Oct 12 09:16:20 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> CONNECT SYS as SYSDBA
Enter Password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
This is bothersome. Especially since the "tnsnames.ora" file has not changed on this box (and it used to work). Ideas on how to fix this?
I also looked through your blog and discovered that we don't have the cap files for anything but the listeners... so, I created a file that looks like this:
NAME=ora.orcl.db
TYPE=application
ACTION_SCRIPT=/u01/app/oracle/product/crs/bin/racgwrap
PLACEMENT=balanced
CHECK_INTERVAL=600
FAILOVER_DELAY=0
FAILURE_INTERVAL=60
FAILURE_THRESHOLD=1
AUTO_START=1
ACTIVE_PLACEMENT=0
OPTIONAL_RESOURCES=
REQUIRED_RESOURCES=
RESTART_ATTEMPTS=1
SCRIPT_TIMEOUT=600
STOP_TIMEOUT=0
HOSTING_MEMBERS=
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=
I then did the following to register it:
[oracle@db1-dev bin]$ ./crs_unregister ora.orcl.db
[oracle@db1-dev bin]$ ./crs_profile -validate ora.orcl.db
[oracle@db1-dev bin]$ ./crs_register ora.orcl.db
[oracle@db1-dev bin]$ ./crs_start ora.orcl.db
Attempting to start `ora.orcl.db` on member `db1-dev`
Start of `ora.orcl.db` on member `db1-dev` failed.
Attempting to start `ora.orcl.db` on member `db2-dev`
Start of `ora.orcl.db` on member `db2-dev` failed.
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.orcl.db'
Thanks again for the help.

Oracle Database not starting ORA-01034: ORACLE not available and ORA-27101

Dear Sir,
today i have restarted the database server (11gR2) after that database service is not starting, the error message is
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0

[oracle@bladb ~]$ export $ORACLE_HOME
-bash: export: `/oracle/product/11.2.0/dbhome_1': not a valid identifier
[oracle@bladb ~]$ sqlplus sys/manager as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:46:28 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
[oracle@bladb ~]$ tail -20 /oracle/product/11.2.0/dbhome_1/startup.log
SQL> Connected to an idle instance.
SQL> ORA-00845: MEMORY_TARGET not supported on this system
SQL> Disconnected
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Starting up database "bladb"
Fri May 3 17:40:24 IST 2013
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 17:40:24 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORA-00845: MEMORY_TARGET not supported on this system
SQL> Disconnected
/oracle/product/11.2.0/dbhome_1/bin/dbstart: Database instance "bladb" warm started.

Oracle 8i not starting

Please help. I have Oracle 8I; webdb and OAS installed on NT4. (Workstation) with SP 5.
Everything was working properly till I had to install Oracle7 client software to connect to Unix box, which is running Oracle7.xx.
I have installed Oracle 7 client into it's own directory (Oracle Home). Now I can not start my listener service for 8I
I get a message "Error 2140, an internal Windows NT error occurred"
I can not use "Home selector" I get a message "Unable to determine Oracle Home information. Primary Oracle Home unchanged"
My registry looks like this
HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/ORACLE HOMES/ORACLE1/HOME0 (ORACLE 8I), HOME1 (WEBDB), HOME2 (OAS)
HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/SOFTWARE MANAGER/OBJECT MANAGE (HAS INFO ABOUT ORACLE7 CLIENT)
At this point Oracle7 client works fine and I am able to connect to a UNIX machine.
Oracle 8I not fine
Listener8I not fine
Webdb not fine
OAS not fine
Any suggestion is greatly appreciated
Best regards
null

Thanks, the only message is from OracelWebAssistande saying "The description for Event ID ( 500 ) in Source ( OracleWebAssistant0 ) could not be found. It contains the following insertion string(s): ."
that is it, I have no idea what this means? please help.
Best Regards

Oracle XE not starting

XE is not starting .... its giving page load error...
Can anyone please help??

Hello, you need restart the service Oracle XE.
1) Start> All Programs> Oracle Databse 10g Express Edition> Stop database.
2) Once the service stopped, do the following: Start> All Programs> Oracle Databse 10g Express Edition> Start Database.
3) Start> All Programs> Oracle Databse 10g Express Edition> Go to home page database .
Roberto.

Upgrade Kernel 640:Oracle DB not start

Hi
i was installed WAS 640 on my test sys. kernel version was 640 and patch level 43.
And i was try to Upgrade latest Kernel 640 and patch level 196.
when i try to up server, it is not up bacause DB was not start (shows dbstr.cmd was failed to connect)
what was the solution??????
regards
raghu

hi!
thanks for your reply...
i was used 2 files which is OS and DATABASE indepent files. i was unpacked both files successfully.
Ok. i try to up DB seperately........ then see what will happed......
One think, when i try to upgrade Kernel 193 patch level, is it any compalsory for BASIS SP ( Like SAPKB64005) becs, i have SP 05.
regards
raghu

Oracle does not start automatically on AIX

Dear all,
Oracle version is 10.2 on AIX
This is the script as suggested by oracle.
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/opt/oracle/product/10.2
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
PLATFORM=`uname`
export ORACLE_HOME PATH
if [ ! "$2" = "ORA_DB" ] ; then
   if [ "$PLATFORM" = "AIX" ] ; then
      remsh $HOST -l $ORACLE -n "$0 $1 ORA_DB"
      exit
   else
      rsh $HOST -l $ORACLE $0 $1 ORA_DB
      exit
   fi
fi
case $1 in
'start')
        $ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
        $ORACLE_HOME/bin/dbshut $ORACLE_HOME &
        echo "usage: $0 {start|stop}"
        exit
esac
exitThe links were also created as suggested by oracle
chgrp and chmod was done as suggested. Also Ihave added one line in /etc/hosts.equiv file
server.servername.com root
please help
Its working. Sorry for the trouble. I did one mistake
Message was edited by:
user480060

1- startup type- Auto
2- Group to user- ORA_DBA
3 - you can check log on tab in the service properties and set the username and password who responsible about this services
As i already stated 3 works. but i want it to work under Local System and not under any user.
Thanks

ORacle is not starting..

Similar Messages

Maybe you are looking for