Oracle Jdeveloper 9i loading time 10min!! Why, is it normal?

I have Oracle Jdeveloper 9i, and is it normal that it needs 10min to load when i start it.
Thanks!

Hello, (sorry about my english I speak Spanish)
I have Oracle 9i run on a Server, and I have my applicatin developers on Jbuilder 5.0 on a Machine : Pentium 3 of 500 Mhz, I do a Pool of Connection (100 connection) and need no more that 45'' seconds.
I believe that you have another problem.
I want to you be tell me more about your problem, and this manner I can help you. Sorry again about my english.
I have Oracle Jdeveloper 9i, and is it normal that it
needs 10min to load when i start it.
Thanks!

Similar Messages

Long bios load time with gtx970 - maybe need gpu bios update?

I just installed my gtx 970 and it all runs fine. However I get a very long bios load time on boot up. Normally it only takes a second or two with a single beep. With the 970 though I get the single beep and the bios load screen, but it sits at that screen for a long time, then another beep, waiting, eventually another beep, and after some more waiting windows will start to load.
My problem is that now I can also no longer get in to the bios. I have tried even plugging in a ps/2 keyboard to see if maybe that could get me in. The farthest I get after hitting delete to enter is I just end up at a black screen. My mobo has no onboard gpu output, so its not like its trying to go to a monitor I cant see.
So would any gpu bios updates fix this? I am currently at the latest bios for my board which updated it to a uefi bios.
cpu: i7-2600k (yes Im aware I will only have pcie2)
mobo: gigabyte z68 d3-b3
ram: 16gb
gpu: MSI gtx 970 Gaming (previous was an evga gtx 660)
SN:602-V316-050B1412042805

Quote from: lucianobessa on 02-January-15, 10:48:08
Under bios features, is there a option called boot mode select?
Try to switch to "legacy only", save and reboot.
Are you using HDMI connector? Try to use DVI.
Sorry for my english!
I dont remember seeing any boot mode select. As far as connections I am using all DVI for my monitors. I have also tried only having a single one connected in case there were issues with multiple monitors
Quote from: Svet on 02-January-15, 10:56:46
with those old boards, you need ME8 to works with modern cards
ask gigabyte support about it
Thanks Ill try emailing them. Is ME8 some other bios? Just never heard of it before
-edit
After reading up it looks like it was just a revision to allow ivy bridge devices, which happened a long long time ago on a bios update:
Support Intel 3rd generation 22nm E1 stepping CPU (Ivy bridge)
Improve power on issue
Update ME / CPU code
Unless theres something else Im missing about ME8

Why my adobe edge animation taking load time too much

Hi
why my adobe edge animation taking load time too much.
Plsease guide me.

Hi, Rohan-
Can you upload your file for us to take a look at? It's hard for us to tell what's going on without taking a look.
Thanks,
-Elaine

Need Help Urgently - Want to Load Time Data Automatically into Oracle HRMS

Hi All,
I am on my 1st Oracle HRMS project and I need urgent help on HOW TO load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System.
And we need to do it in real time as the data inserted in the MS Access Database we need to pull that into Oracle HRMS for Payroll purposes.
If somebody can help me in this I'll greatly appreciate that.
Thanks, AGAIN IT IS VERY URGENT
Zee

Zee,
Let's go back to your core requirement "load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System".
Questions:
1. Is this time data to be used to pay a person through Oracle Payroll?
2. What legislation (country) is this for?
3. Are you using Oracle Time and Labor (OTL) as the front-end or do you intend to enter the data directly into Oracle Payroll?
See the following OTL documents:
MetaLink Note 369022.1 - How Can Hours Worked Be Imported into OTL From Third Party System?
MetaLink Note 223987.1 - Oracle OTL HXC TimeStore Deposit API
MetaLink Note 283593.1 - Formatting an Exported Timecard Template using Microsoft Excel
Regards,
Greg

Q : Using column level VPD policies with Oracle Jdeveloper ADF BC ?

For one of our big customer, we already successfully developped a new java application using Oracle Jdeveloper with ADF, ADF BC and the Virtual Private Database (VPD) with row level policies.
Our customer has new business requirements that could be fullfilled using column level VPD policies.
Has someone already successfully (or not) developped a business application using column level VPD policies with ADF, ADF BC on Oracle 10g R2 database and OracleAS 10g (10.1.2) ?
Is it supported by Oracle ? what are the pitfalls, difficulties, problems you've met ?
Is it a viable solution and if not, why ?
Thanks in advance.
Rémy

Tomas,
my 2 cent:
if you know how to get the info from the db during run time you should be able to overwrite the frameworks message bundle look to get the description from the db instead of from the resource bundle.
Or you load all descriptions from the db into a resource bundle and use the keys in the tooltip directly.
Timo

Anyway to have JDeveloper dynamically load BC4J components in memory?

We are dealing with a large BC4J based application that contains large amount of application modules. So far, 300 application modules and total 4000 BC4J objects have been created. The size of the application still keeps growing daily... may up to twenty times than what we are having right now.
While the application size growing, some unusual problem comes out. The biggest problem is that it makes JDeveloper very sluggish. It takes 15 minutes to just open JDeveloper and may need a few minutes to open the application module editor. (FYI: in our team, most developers have 1G memory and 1.8G CPU or up.) This is probably still OK for right now, but it will become a big problem later when the project size grows.
When we analysis the project structure, we know that most of time, developer does not need to load all the application modules. For example, we have a core package that contains about 30 application modules. This core package needs to be shared and should be loaded. But, the other nine packages contain about 30 application modules each do not need to be loaded into memory at the same time in most cases. Since BC4J is XML based, we could not find a way to just partially load those application modules, especially when theres cross references between them.
When we check the project.jpr file, looks like all BC4J objects are referenced there. We have 40K lines in our project.jpr file now. When open JDeveloper, we believe JDeveloper will try to load all referenced BC4J XML content into memory. This consumes 500M memory and makes the overall performance very sluggish. The situation may become even worse when the project size keeps growing. For example, we cannot have 5000M (5G) memory in a development machine for 3000 application modules.
We do know that by checking out the "ScanSource Paths to Determins Project Contents" in the Input Paths of Project Settings, we can short the JDevelopers open time, but this will not give BC4J relationship information and some other useful information Not a practical solution.
So, any idea to make JDeveloper dynamically loaded BC4J based on need?
Weve tried a few ways. One is to partition the application into different project and import the core one into the other projects. Only open the project in workspace when need. But this is not officially documented by Oracle and we are not sure whether it is possible/correct or not. Another thought is to remove the NOT-CURRENTLY-USED package from the project. But JDeveloper only support file level remove.
Any help on this dilemma will be highly appreciated.
Thanks,
Charles

The package is the unit of loading in the IDE for ADF business components.
To edit components, they must belong to the project.
To refer to components in a read-only way, they can be imported. This allows other editable or read-only components to refer to them without allowing the imported components to be edited.
Both editable and imported components need to be loaded in memory to use them, so you can save memory at design time by creating projects that leave out as many packages as possible.
Is there a way we can get your existing project in house to study its design time performance?

How to tune data loading time in BSO using 14 rules files ?

Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
Zeljko

Thanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko

Issue with creating Web Service Client using Oracle JDeveloper

Hi All,
I am trying to create a Web Service Client using Oracle JDeveloper. I set the Project compiler property to JRE 1.4
When I run the web service client, it throws me bunch of errors saying:
'Error(32,2): annotations are not supported in -source 1.4'
I am wondering why JDeveloper is using annotations even after I set the compiler property to 1.4
I am following this link to create the webservice client:
http://www.oracle.com/technetwork/developer-tools/forms/webservices-forms-11g-094111.html
Any help in this regard would be greatly appreciated.
Thanks,
Scott.

Dear Shay,
Thanks for your prompt response.
You are right. JDeveloper 11g uses JDK 6 style annotations for the clients it creates. But you can change the JRE Version used at compile time by following these steps:
1. In the Applications Navigator, right-click the Project Nanem node and select Project Properties... from the context menu.
2. Select the Compiler node and check the Source Files and Generated Class Files dropdown lists. You may change these versions depending on the version of the JRE you are using with Forms to ensure that the compiled
classes from JDeveloper can be read by the JRE used by Form.
So I selected JDK version 1.4 there.
Sorry that I did not mention that we are using Oracle Forms 10g. That is the reason I selected JDK 1.4
Thank you.
Scott.

AspectJ load time weaving AnnotatedNoClassDefFoundError

I am trying to use AspectJ load time weaving on an application running on OC4J 10.1 on JRE 1.5. I get AnnotatedNoClassDefFoundError with Missing class: org.aspectj.runtime.internal.AroundClosure message.
Here is what I am doing:
1. Starting the server with JVM argument -javaagent:aspectjweaver.jar to enable AspectJ load time weaving.
2. I put an AspectJ library MaintainJAspect.jar under j2ee\home\applib folder.
3. I put the aspect defined in aop.xml at j2ee\home\applib\META-INF\aop.xml .
The aspect defined in aop.xml is properly weaved into the application class (I can see in the dumped source). But when the application is running, it fails with the message pasted below.
My question is, while it says that the missing class is available in oc4j classloader, which is parent of system and application class loaders, why is it not available to my application?
Thanks in advance,
Choudary Kothapalli.
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: org.aspectj.runtime.internal.AroundClosure
     Dependent class: com.maintainj.aspect.ExecutionAspect
     Loader: global.libraries:1.0
     Code-Source: /C:/Programs/oc4j10/j2ee/home/applib/MaintainJAspect.jar
     Configuration: <code-source> in /c:/Programs/oc4j10/j2ee/home/config/server.xml
The missing class is available from the following locations:
     1. Code-Source: /C:/Programs/oc4j10/j2ee/home/maintainj/aspectjweaver.jar (from system property java.class.path)
     This code-source is available in loader oc4j:10.1.3.
     at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [C:/Programs/oc4j10/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]
     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [C:/Programs/oc4j10/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [C:/Programs/oc4j10/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [C:/Programs/oc4j10/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]
     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_08]
     at com.maintainj.aspect.ExecutionAspect.ajc$around$com_maintainj_aspect_ExecutionAspect$1$133697c9proceed (ExecutionAspect.aj:1) [C:/Programs/oc4j10/j2ee/home/applib/MaintainJAspect.jar (from <code-source> in /c:/Programs/oc4j10/j2ee/home/config/server.xml), by global.libraries:1.0]
     at com.maintainj.aspect.ExecutionAspect.ajc$around$com_maintainj_aspect_ExecutionAspect$1$133697c9 (ExecutionAspect.aj:42) [C:/Programs/oc4j10/j2ee/home/applib/MaintainJAspect.jar (from <code-source> in /c:/Programs/oc4j10/j2ee/home/config/server.xml), by global.libraries:1.0]
     at simple.SimpleServlet.<init> (SimpleServlet.java:12) [C:/Programs/oc4j10/j2ee/home/applications/SimpleWeb/SimpleWeb/WEB-INF/classes/ (from WEB-INF/classes/ in C:\Programs\oc4j10\j2ee\home\applications\SimpleWeb\SimpleWeb\WEB-INF\classes), by SimpleWeb.web.SimpleWeb:0.0.0]

Not sure what you mean by "support". AspectJ rewrites bytecodes so the VM will just execute them. You'll probably encounter increased memory usage with load-time weaving as class loading/initialization occurs in Immortal memory. Also load-time weaving won't be compatible with Java RTS's Initialization Time Compilation (ITC) feature ... or at least not the pre-initialization part. It's likely that no-heap threads won't work well running weaved code if there are any references back to heap-allocated AspectJ runtime objects, and similarly (like most libraries) it's not likely to work from scoped memory.
HTH.
David Holmes

Increase Adf Application Load Time

We have identified that ADF application is taking very long time to load at very first time , it is taking time to load the images,css and java script files ..
only after all these resources are downloaded, then it is starting to load the page..
Is there a way to load the page (displaying content on browser) in spite of waiting complete dom is ready. (domConetntLoaded).?
Is there any why to increase the page load time.?

User, tell us your jdev version, please!
The framework loads some content up front, which takes time. There are some techniques you can use to reduce this time like http://www.ateam-oracle.com/improving-adf-page-rendering-time/
or resource losing servlet which can cache calls and deliver images or other stuff faster.
Timo

Page load time of portal

What is the average page loading time of webcenter portal?

2 to 5 content presenters on a single page is to much. You need to try to consolidate the content so you can minimize the number of content presenters on a page.
Most of the time the problem is in the content model. Even complex content models can be put in a single data file by using lists and so on. This way you can minimize the CP's to one or two per page.
When using coherence you should always set the expiry-delay for the ContentNodeCaches to 0 which means that coherence will never invalidate the cache!
The reason behind this is that the connection to UCM implements a content sweeper which will invalidate the cache items that have been changed. In the Enterprise Manager you have the field "Cache Invalidation Interval". This will determine the interval in which a service from UCM is called to check which items have been updated. This will also notify coherence and update the nodes with the new version.
That's why the expiry delay needs to set to 0 in coherence.
Also set the high units to 80% of your entire repository that is used on the top pages. This can easily be 10000 without problem.
I'm planning on writing a blog post about these configurations later on.
The JOC configuration is OOTB but you need to run a script to enable it. It is recommended when you use WC Spaces.
Information can be found here: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/extend_wc.htm#CHDIFEJH

Slow BIOS load times

Hello, I own a T420i and have been experiencing very slow load times on startup. The "ThinkPad" BIOS screen stays active for roughly 5-10min before continuing like normal. Once operational the computer works fine other then an occasional freeze up (which becomes extremely annoying with a boot time of 10 min).
Thanks for any suggestions.

Hi Epitome, welcome to the forums,
do you have any external devices, especiall USB storage, attached to the system when booting? If so please detach them to see if you experience the same problem.
If the system boots normally please exclude the USB devices from the boot order in BIOS; the system may be scanning them for boot information before moving on to start from the main hard drive.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Long load times. software? hardware? downloads?

in the past few hours i have developed the problem of longer thn normal load times. they went from .25 sec up to 5 or 6sec idk what to do my software ugrades are from earliest to latest, stuffit, wmp for mac osx, istat pro, core duo temp and i have 512 mb of ram any suggestions? oh i have been running itunes and safari

Typical with all computers usually. It's where programs get loaded into RAM and not fully cleared out. Once you reboot the memory gets reset and it's a clean slate. If it's killing performance that much, then why not upgrade the RAM?

Can this html code be changed to speed up the image load time?

I found some html that creates a auto running slide show. I've got three images (small image sizes) but it is slow to start up when the page is first opened. http://web.me.com/phelpssculpture/Site/test.html this is the escaped code:
<center><img id='imageholder' src='' ></img></center>
<script type='text/javascript'>
images = new Array();
images.push('http://web.me.com/phelpssculpture/Docs/typewriterprpage.jpg');
images.push('http://web.me.com/phelpssculpture/Docs/royalprpage.jpg');
images.push('http://web.me.com/phelpssculpture/Docs/Lovetest.jpg');
var image_index = 0;
function rotateImage() {
if (image_index == images.length - 1) { image_index = 0 } else { image_index++ }
document.getElementById('imageholder').src = images[image_index];
setInterval('rotateImage()', 5000);
</script>
I have a page: http://web.me.com/phelpssculpture/Site/Resume.html
that has a rollover image (from OldToad) that has two images about the same file size and located in the same folder on my iDisk as the other slide show images but it seems to load instantly.
this is the escaped code:
<SCRIPT LANGUAGE="JavaScript">

</script>
<a href="http://web.mac.com/phelpssculpture/Site/royal.html" onmouseover="image1.src=loadImage1.src;" onmouseout="image1.src=staticImage1.src;">
<img name="image1" src="http://web.me.com/phelpssculpture/Docs/royalprpage.jpg" border=0></a>
Does anyone know if it's possible to improve the html of the slideshow snippet to speed up the initial load time?
Thanks, David

Ethmoid:
There are seven different pages: http://web.me.com/phelpssculpture/Site/movieroyal_davidphelps.html
Each link is directed to a different page.
I created the basic layout on one page and then duplicated the page six times.
the links are in one text box ( that's why they're lined up well ) and each individual word is activated as a link. I changed the background color of the forward tab to match the color of the main shape and used the send forward or send backward command to get the tabs to look right on each page.
The only problem with the words being in a single text box is that explorer doesn't render the spacing correctly and they fall off their respective tabs. When I get time I will put each word in it's own text box ( it's not that hard to align them ) so it will render properly in explorer.
Sincerely, David Phelps

ERROR while loading time dimension table

i need to load time dimension from csv to oracle table, while loading i got the error.
my source data type is date and target is date.
ODI-1226: Step sample day fails after 1 attempt(s).
ODI-1240: Flow sample day fails while performing a Loading operation. This flow loads target table W_SAMPLE_DATE.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection Target_Oracle.
Caused By: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
while creating c$ table
create table WORKSCHEMA.C$_0W_SAMPLE_DATE
     C3_ROW_WID     NUMBER(10) NULL,
     C1_CALENDAR_DATE     TIMESTAMP() NULL,
     C2_DAY_DT     TIMESTAMP() NULL
)

check the source data and use the correct function eg TO_DATE(SRC.DATE, 'MM?DD/YYYY') use NVL if required.

Oracle Jdeveloper 9i loading time 10min!! Why, is it normal?

Similar Messages

Maybe you are looking for