Oracle Light Simulator Tutorial Not working
Hi
I have installed Oracle AS 10g and Oracle SES without SDR.THere is a tutorial to create light Simulator .But for this I do nto have an option of "Event Dispatcher" in the SES Console.
Cnn someone help me in getting this right
Regards
Gayathri
[email protected]
Sorry but I'm not sure I understand the question.
If you are looking for the Event Flow Dispatcher, that is now part of the core and not a dispatcher extension anymore.
To use it, all you have to do is setup the eflow.xml in the config directory, and next time when the system starts it will load it.
If I misunderstood you, please repost your questions - Thx -- Sam
Similar Messages
-
Photoshop CC Lighting Filter is not working
Lighting Filter is not working. When you run the filter the circular ring/point does not appear to adjust the light. It is totally missing. You can adjust the settings but the filter never runs. After attempting to run the filter I tried to go back to my workspace. It would not reset to the default Essential workspace. The other workspaces were OK. I closed and reopened the application and my workspace was restored. I tried running my GPU settings in advanced normal and basic. None of the settings worked. Please advise if I am missing something.
The filter is now working. It looks like you must close and reopen the application after changing your settings for the filter to work.
-
My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same. -
Oracle 10g database homepage not working?
Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck -
Oracle date parameter query not working?
http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results.. -
Oracle 10gr2 locally is not working after installing Oracle 11g
hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime processGenerally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH
-
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
[iPhone] Pinch/zoom in UIScrollView at simulator does not work
Hi everyone,
I tried to get pinch/zoom working for a UIImageView within a UIScrollView. Therefore I downloaded the source code from the tutorial under http://www.vimeo.com/1642150. When I started the app in the iPhone simulator I used the options key and the mouse pad to simulate zoom/pinch gesture, but nothing happend (the two gray circles are shown in the simulator which indicates that zoom/pinch gesture is used for input). The zoom/pinch does not work within the UIScrollView, whatever I try, nothing worked. None of the UIScrollView delegate methods are called (used NSLog to check it). Did anybody has a similar problem or behaviour?
Thanks for help.Thanks for the reply. I finally found the problem. You have to use two fingers and the options key to simulate zoom/pinch gestures with a trackpad, although the two gray circles are shown when use only one finger, zoom/pinch only works if you use two finger, like you would do for scrolling.
-
Magsafe Charger not charging - when it lights up may not work
I started experiencing this a few weeks ago. Since then I have gone through 2 adapters.
The magnet works and everything, but it doesnt light up, and where that battery is up there it doesn't show any signs of recognition.
I have to wiggle it a little bit and apply some pressure to get it working.
Even then, it still sometimes doesn't work. It'll be green and say "Not Charging".
It doesn't always do that though. Sometimes it will charge. I have a new battery (from around christmas time) so it cant be the battery... i wouldn't think anyways.
Another thing, is when I get it charging, I have to lay it perfectly still. One little tiny bump or something will cause the light to go off and stop charging. I've cleaned the magsafe part and the part it lpugs into the computer. I have the same problem.
On the "About this Mac" thing, here are my stats (*NOTE this is with the magsafe adapter in, but not working):
Battery Information:
Model Information:
Serial Number:
Manufacturer: DP
Device name:
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 1182
Fully charged: No
Charging: No
Full charge capacity (mAh): 4919
Health Information:
Cycle count: 97
Condition: Good
Battery Installed: Yes
Amperage (mA): -1396
Voltage (mV): 11133
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 180
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: NoI had the same pin problem as many here. My neutral pin (outer most) stop pushing out, I can turn the plug upside down and the pin falls into place. Take a bit of wiggling to get it to charge the computer. This is a new magsafe, only 4 weeks old. I had to have my other one replaced because the exact same pin did the exact same thing again.
-
HP Laserjet 1320 attention light on, printer not working.
I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.
Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
Oracle XE Western version not working on Windows XP pro
I have noticed that production version of the Oracle XE Western version does not work properly. The beta version created the database properly, the production version does not. I tried to install it on a Windows XP Pro version.
Below is the alert_xe.log
Dump file c:\oracle\xeprod\app\oracle\admin\xe\bdump\alert_xe.log
Thu Mar 30 11:38:32 2006
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:533M/1023M, Ph+PgF:2253M/2461M, VA:1945M/2047M
Thu Mar 30 11:38:32 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
MMAN started with pid=4, OS id=4092
PSP0 started with pid=3, OS id=4088
PMON started with pid=2, OS id=4084
DBW0 started with pid=5, OS id=2044
LGWR started with pid=6, OS id=1248
CKPT started with pid=7, OS id=200
SMON started with pid=8, OS id=2036
RECO started with pid=9, OS id=2012
CJQ0 started with pid=10, OS id=212
MMON started with pid=11, OS id=1924
Thu Mar 30 11:38:38 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=380
Thu Mar 30 11:38:38 2006
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:38:42 2006
The input backup piece C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB is in compressed format.
Thu Mar 30 11:39:10 2006
Full restore complete of datafile 4 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\USERS.DBF. Elapsed time: 0:00:26
checkpoint is 193065
Full restore complete of datafile 2 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\UNDO.DBF. Elapsed time: 0:00:27
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Full restore complete of datafile 3 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\SYSAUX.DBF. Elapsed time: 0:00:45
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-00600: internal error code, arguments: [krbrckhr_fail], [C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB], [83], [128], [3], [9427], [], []
Thu Mar 30 11:39:29 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:29 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:29 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_744.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Shutting down instance: further logons disabled
Thu Mar 30 11:39:29 2006
Stopping background process CJQ0
Thu Mar 30 11:39:29 2006
Stopping background process MMNL
Thu Mar 30 11:39:29 2006
Stopping background process MMON
Thu Mar 30 11:39:30 2006
Shutting down instance (immediate)
License high water mark = 1
Thu Mar 30 11:39:30 2006
Stopping Job queue slave processes
Thu Mar 30 11:39:30 2006
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:32 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:34 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=756
PSP0 started with pid=3, OS id=796
MMAN started with pid=4, OS id=836
DBW0 started with pid=5, OS id=928
LGWR started with pid=6, OS id=152
CKPT started with pid=7, OS id=924
SMON started with pid=8, OS id=932
RECO started with pid=9, OS id=1212
MMON started with pid=10, OS id=1272
MMNL started with pid=11, OS id=1296
Thu Mar 30 11:39:35 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:35 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:35 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:35 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_1144.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Thu Mar 30 11:39:35 2006
Stopping background process MMNL
Thu Mar 30 11:39:36 2006
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=10, OS id=580
MMNL started with pid=11, OS id=1288
Thu Mar 30 11:39:36 2006
ALTER SYSTEM enable restricted session;
Thu Mar 30 11:39:36 2006
alter database "XE" open resetlogs
ORA-1507 signalled during: alter database "XE" open resetlogs...
Thu Mar 30 11:39:36 2006
alter database drop logfile group 3
ORA-1507 signalled during: alter database drop logfile group 3...
Thu Mar 30 11:39:36 2006
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ORA-1109 signalled during: ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED...
Thu Mar 30 11:39:36 2006
ALTER SYSTEM disable restricted session;
Shutting down instance: further logons disabled
Thu Mar 30 11:39:37 2006
Stopping background process MMNL
Thu Mar 30 11:39:38 2006
Stopping background process MMON
Thu Mar 30 11:39:38 2006
Shutting down instance (immediate)
License high water mark = 1
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S000' to die
Waiting for shared server 'S002' to die
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:39 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:42 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
spfile = C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=1480
PSP0 started with pid=3, OS id=1484
MMAN started with pid=4, OS id=1488
DBW0 started with pid=5, OS id=576
LGWR started with pid=6, OS id=1492
CKPT started with pid=7, OS id=1496
SMON started with pid=8, OS id=1260
RECO started with pid=9, OS id=376
CJQ0 started with pid=10, OS id=824
MMON started with pid=11, OS id=244
MMNL started with pid=12, OS id=1636
Thu Mar 30 11:39:42 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:42 2006
ALTER DATABASE MOUNT
Thu Mar 30 11:39:42 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Mar 30 11:39:42 2006
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thu Mar 30 11:41:54 2006
alter database mount
Thu Mar 30 11:41:54 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-205 signalled during: alter database mount
Thanks,
LucianI think the relevant error from the log file is as follows
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE
There are a couple of things to consider here
Why is this install going into c:\oracle\xeprod ? If should be going into C:\oraclexe. Did you do something to change the default install infrastructure ?
Secondly - sometimes we see this unable to open file error message if some other process is reading the file at the same time as the installer is trying to install it. Anti virus software and Google desktop have been culprits to date. -
Oracle Clinical - install.sh not working - says not found or Java runtime error.
install.sh not working - need help
Hi all,
OS Solaris 8. Sun Sparc 20 - 256 MB 9.1 GB. I am using csh for this install as instructed for the user OPAPPS.
I have installed Oracle 8.1.6 Rel 2 on the SUN Sparc. Everything is fine and a customised DB has been created. Now I
have to install an Oracle application on the same server. I have a working knowledge of Unix but I don't know scripting.
I logged in as OPAPPS as required. (.chsrc). I have set the path with all possible directories and made it a member of
group DBA as requested.
I put the CD in the CDROM and then cd /cdrom
# install.sh
BUT I get this message: install.sh not found.
install.sh is there on the CD. This is the contents of install.sh from the CD
#!/bin/sh
os=`uname | tr A-A a-z`
case "$os" in
sunos) platform=solaris
hp-ux) platform=hp-ux
osf1) platform=decunix
esac
#The environment variable $SRCHOME cannot be set during installation
unset SRCHOME
unset SHLIB_PATH
CMDDIR=`dirname $0`
if [ "CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relatove path with fully qualified path
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ] ; then
PATH=$PATH:/usr/bin: /bin
export PATH
else
PATH=/usr/bin:/bin
fi
cd $CMDDIR/$platform/Disk1/install/$platform
./runinstaller $*
directory structure on CD
-r-xr-xr-x 1 root sys 638 Aug 23 2000 install.sh
dr-xr-xr-x solaris
dr-xr-xr-x hpunix
dr-xr-xr-x decunix
dr-xr-xr-x nls732
solaris/disk1/install/solaris and the file
-r-xr-xr-x runinsta.
-r-xr-xr-x oraparm.ini
dr-xr-xr-x images
d .
d ..
Would anybody know why I get install.sh NOT found when it is there?. This executabel is on the CD. I am not sure why it gives
a java runtime error message when it is OK. Remember, I have already installed Oracle 8i using the same environment with the existing java runtime .
Thanks for your help.Hi,
I am installing Oracle clinical 4.5.x.
I need to know whether both the Database server and application server for Oracle Clinical can be installed on same server(windows 2000 server).
Both of them are installed on windows platform.
It seems that u have tried the single node installation.
So,please give all the possible details regarding the single node installation for oracle clinical no matter what platform it is.
Please reply me as soon as possible, its urgent.
Thanking u in advance. -
Apple video tutorial not working
Hi, I faced problem with video tutorial in apple site , it is not working but a quotation mark appeared .
I have flip 4 mac on my computer
Quick time updated to 7.6.2 edition.
How can i solve this problem ?
because i would like to watch these videos
Thank youHi Mih008
i had similar problem with my old macbook and my recent macbook pro when i transferred my file to it.
it turn that i had corrupted file in the quick player and it had to be removed , off course this problem had to be solved by mac specialist .
everything now runs smoothly.
good luck -
Lot of exceptions in kura-console.log. Tutorial not working for me
Hi David,
Well, now I have a wired connection to my pi and got kura up and running. But, my tutorial implementation did not work.
Later, I found there is a new 1.2.0 verion of kura, so I uninstalled 1.0.0 as per wiki steps and installed 1.2.0. I had the kura showing up again and deployed green house. But again, my LED and temperature sensors were not showing.
I was worried if my pi has gone bad, but I found that its giving right voltages at power pins. I checked it is reaching my sensors too.
Later, I looked into in the kura-console.log which looked huge. Here I am attaching it for reference. On face of lot of exceptions have occurred during its start up. I have no clues about it as I am getting started and did not want to deviate anywhere in the tutorial specification(all items used are brand new). Well only change is I have upgraded Kura to 1.2.0.
telnet 127.0.0.1 5002 shows
osgi> ss
"Framework is launched."
id State Bundle
0 ACTIVE org.eclipse.osgi_3.8.1.v20120830-144521
1 ACTIVE org.eclipse.equinox.cm_1.0.400.v20120522-1841
2 ACTIVE org.eclipse.equinox.common_3.6.100.v20120522-1841
3 ACTIVE org.eclipse.equinox.registry_3.5.200.v20120522-1841
4 ACTIVE org.eclipse.equinox.http.registry_1.1.200.v20120522-2049
5 ACTIVE org.eclipse.equinox.console_1.0.0.v20120522-1841
6 ACTIVE org.eclipse.equinox.ds_1.4.0.v20120522-1841
7 ACTIVE org.eclipse.equinox.event_1.2.200.v20120522-2049
8 ACTIVE org.eclipse.equinox.io_1.0.400.v20120522-2049
9 ACTIVE org.eclipse.equinox.metatype_1.2.0.v20120522-1841
10 ACTIVE org.eclipse.equinox.util_1.0.400.v20120522-2049
11 ACTIVE org.eclipse.osgi.services_3.3.100.v20120522-1822
12 ACTIVE org.eclipse.osgi.util_3.2.300.v20120522-1822
13 ACTIVE org.apache.felix.gogo.command_0.8.0.v201108120515
14 ACTIVE org.apache.felix.gogo.runtime_0.8.0.v201108120515
15 ACTIVE org.apache.felix.gogo.shell_0.8.0.v201110170705
16 ACTIVE org.knowhowlab.osgi.monitoradmin_1.0.2
17 ACTIVE org.apache.felix.dependencymanager_3.0.0
18 ACTIVE org.apache.felix.deploymentadmin_0.9.5
19 ACTIVE osgi.cmpn_4.3.0.201111022214
20 ACTIVE org.eclipse.equinox.http.jetty_3.0.0.v20120522-1841
21 ACTIVE org.eclipse.equinox.http.servlet_1.1.300.v20120522-1841
22 ACTIVE org.eclipse.jetty.continuation_8.1.3.v20120522
23 ACTIVE org.eclipse.jetty.http_8.1.3.v20120522
24 ACTIVE org.eclipse.jetty.io_8.1.3.v20120522
25 ACTIVE org.eclipse.jetty.security_8.1.3.v20120522
26 ACTIVE org.eclipse.jetty.server_8.1.3.v20120522
27 ACTIVE org.eclipse.jetty.servlet_8.1.3.v20120522
28 ACTIVE org.eclipse.jetty.util_8.1.3.v20120522
29 ACTIVE javax.servlet_3.0.0.v201112011016
30 ACTIVE org.apache.commons.fileupload_1.2.2.v20111214-1400
31 ACTIVE org.apache.commons.io_2.4.0
32 ACTIVE slf4j.api_1.6.4
Fragments=33
33 RESOLVED slf4j.log4j12_1.6.0
Master=32
34 RESOLVED log4j_1.2.17
Fragments=35
35 RESOLVED log4j.apache-log4j-extras_1.1.0
Master=34
36 ACTIVE org.json_1.0.0.v201011060100
37 ACTIVE org.eclipse.paho.client.mqttv3_1.0.1
38 ACTIVE org.hsqldb.hsqldb_2.3.0
39 ACTIVE com.google.protobuf_2.6.0
40 ACTIVE com.codeminders.hidapi_1.1.1
41 ACTIVE org.eclipse.soda.dk.comm_1.2.1
42 ACTIVE javax.usb.api_1.0.2
43 ACTIVE javax.usb.common_1.0.2
44 ACTIVE javax.usb.linux_1.0.3
45 ACTIVE jdk.dio_1.0.1
46 ACTIVE org.apache.commons.net_3.1.0.v201205071737
47 ACTIVE org.tigris.mtoolkit.iagent.rpc_3.0.0.20110411-0918
48 ACTIVE com.gwt.user_0.2.0
49 ACTIVE org.eclipse.kura.deployment.agent_1.0.2
50 ACTIVE org.eclipse.kura.api_1.0.4
51 ACTIVE org.eclipse.kura.core_1.0.4
52 ACTIVE org.eclipse.kura.core.certificates_1.0.0
53 ACTIVE org.eclipse.kura.core.cloud_1.0.4
54 ACTIVE org.eclipse.kura.core.comm_1.0.1
55 ACTIVE org.eclipse.kura.core.configuration_1.0.3
56 ACTIVE org.eclipse.kura.core.crypto_1.0.2
57 ACTIVE org.eclipse.kura.core.deployment_1.0.2
58 ACTIVE org.eclipse.kura.core.log_1.0.0
59 ACTIVE org.eclipse.kura.core.net_1.0.4
60 ACTIVE org.eclipse.kura.linux.clock_1.0.3
61 ACTIVE org.eclipse.kura.linux.command_1.0.3
62 ACTIVE org.eclipse.kura.linux.net_1.0.4
63 ACTIVE org.eclipse.kura.linux.position_1.0.3
64 ACTIVE org.eclipse.kura.linux.usb_1.0.4
65 ACTIVE org.eclipse.kura.linux.bluetooth_1.0.1
66 ACTIVE org.eclipse.kura.linux.watchdog_1.0.2
67 ACTIVE org.eclipse.kura.net.admin_1.0.4
68 ACTIVE org.eclipse.kura.web_1.0.4
69 ACTIVE org.eclipse.iot.greenhouse.coap_0.1.0.SNAPSHOT
70 ACTIVE org.eclipse.iot.greenhouse.publisher_0.1.0.SNAPSHOT
71 ACTIVE org.eclipse.iot.greenhouse.sensors_0.1.0.SNAPSHOT
72 ACTIVE org.eclipse.iot.greenhouse.sensors.raspberrypi_0.1.0.SNAPSHOT
osgi>
Please help!
regards,
KrishnaHi David,
It worked!!
I had to follow steps as mentioned in https://learn.adafruit.com/adafruits-raspberry-pi-lesson-4-gpio-setup/configuring-i2c
I did it once and rebooted and all started to work!
Found it shared by Diego Alejandro PalmeiraFriend in this forum.
thanks,
Krishna -
The link to a user defined oracle stored procedure does not work
This is based on the HowTo Download a file
http://otn.oracle.com/products/database/htmldb/howtos/howto_file_upload.html
I have given a link to a procedure as follows, which will download the file (as given in the HowTo):
#OWNER#.download_my_file?p_file=#ID#.
However, this does not work. It tries to open a page rather than executing the procedure. It displays the page not found messagethat page not found message is a generic one. you'd want to check your apache logs for more info on what really happened. my guess is that you missed step 5 of that how-to, "grant execute on download_my_file to public"
hope this helps,
raj
Maybe you are looking for
-
What is new in TCS 3.5 ?
Hi all, so what is the diffrence to TCS3? I could not make out any new features/versions, but perhaps the website has not been updated yet. The features page was still titled TCS3. Please excuse for posting unter Adobe Technical Communications Suite
-
Hi, I need help for my HP Pavilion Notebook. The Model Details are as below: Model:dv4-1551dx OS: WIndows 7 64 Bit Place of Purchase: Best Buy at Torrance ,California My Problem: I am getting a Blue Screen Shut down with KERNEL_DATA_INPAGE_ERROR.
-
My ipad 2 is not very good picking up wi-fi signals
MY IPAD 2 is not very good at picking up wi-fi signials .I have a Kindle Fire and it has no problems in the same location .Is this a normal limitation for the IPAD or do I need a fix
-
I have a new laptop and want to hook up 2 HP w2007 monitors. My laptop has 1 VGA connector.
-
Is it possible to execute Single Channel read of AI channel too quickly?
When executing single channel read of volts on 16XE50 in VB6 it seems to return an errornous result if too fast. Increase the time between reads and the result is correct. I need to scan single channel quickly for short period to check a trip point a