Oracle Linux 6.0 64 bit instalation problem

Hi,
I downloaded Oracle Linux 6.0 64 bit from Oracle site. I unpacked it and burned it on dvd, but it can't boot so I can't install it. I could't do it even with virtual machine. I also put disk detection latency to 15 sec so I could give Linux enough time to boot, but it did't help. So any sugestion? :) I have core i7 2600 and Gigabyte UD4 P67 B3, bit I don't think it is a problem.
Thx
Edited by: MarcusO on 2011.03.30 00:15

This directory contains image files used during the Oracle Linux 6
installation process.
The boot.iso file that is sometimes found in the images directory has
been removed for space reasons. It is available as a separate download
from ULN. boot.iso is an ISO 9660 image of a bootable CD-ROM. It is useful
in cases where the CD-ROM installation method is not desired, but the
CD-ROM's boot speed would be an advantage.
To use this image file, burn the file onto CD-R (or CD-RW) media as you
normally would.
From Images folder, installation DVD.
Can anyone tell me what to do

Similar Messages

Oracle Linux 5.10 32 bit install, X server won't start.

Hello Everyone, I hope you are having a wonderful day.
I just installed Oracle Linux 5.10 32 bit on a older windows pc that has 32 bit architecture. When I reboot it, it comes up and says "Failed to start the X Server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?
When ever it probes for the video card, its fails then reboots to this every time.
What do I need to do at this point?

I agree with Dude.
Oracle Linux is a server distro. You are installing it on a client platform. You are expecting it to support client hardware and have, by default, the required drivers on hand to support that client hardware.
I would think that the failure here is on your part, and not on Oracle Linux's part.
Why are you not using Ubuntu instead? It is one of the most widely used Linux desktop clients, and has out-of-the-box support for an extensive range of client hardware (from h/w acceleration support for video adapters, to supporting video/web cams. touch pads, WiFi chipsets, etc).
If you want to test drive Oracle Linux as a server platform on client hardware, consider virtualisation (like free VirtualBox).

Silent install of oracle 11.2.0.1.0 on oracle linux 6.4 64 bit edition

Hello,
What files do I need to alter to install oracle 11gR2 {11.2.0.1.0}[1] rdbms ontop of a local install of oracle linux 6.4 64 bit edition ?
I want to do the install in silent mode from the command line.
-oracle linux 6.4 installed and updated with the latest patches.
Thanks Glenn
[1]
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
linux.x64_11gR2_database_1of2.zip
linux.x64_11gR2_database_2of2.zip

please find below link, it is having step by step oracle 11g installtion on oracle linux5
please fallow up to Installation ..dont invoke directly ./runInstaller.
go to unzip directory..u may find respance folder in taht edit.rsp file as per the your requirement.
please post .rsp paramters details..will guide you what needs to be set....if know the parameters...edit it and save ...then execute below
go to runInstaller having folder..the execute below cmd.
./runInstaller -silent -responseFile /u01/Disk1/responce/rsp11g.rsp DECLINE_SECURITY_UPDATES=true
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-oracle-linux-5.php

JDeveloper 11.1.2 install on Oracle Linux 6 U1 64 bit

I am trying to install jDeveloper on Oracle Linux 6 U1 (6.1) and keep getting a variety of errors. I know that jDeveloper does not support 64 bit Operating Systems very well. However with the majority of new systems being 64 bit and the memory limitations of 32 bit is jDeveloper going to move into the next century and support 64 bit jvm's and operating systems natively? When will this happen?

StuartSimpson wrote:
I am trying to install jDeveloper on Oracle Linux 6 U1 (6.1) and keep getting a variety of errors. I know that jDeveloper does not support 64 bit Operating Systems very well. However with the majority of new systems being 64 bit and the memory limitations of 32 bit is jDeveloper going to move into the next century and support 64 bit jvm's and operating systems natively? When will this happen?JDeveloper supports 64-bit operating systems just fine as well as the JDK is also a 64-bit JDK. I've been running JDev using 64-bit JDKs on OS X and Linux for a few years without issue.
You might be having issues with JDeveloper on Oracle Linux 6, however - the WebLogic install scripts, etc. do not include support for Oracle Linux 6 as of yet, nor Java 7.
Take a look at the certification matrix for operating systems and Java versions in JDeveloper:
http://www.oracle.com/technetwork/developer-tools/jdev/jdev11gr2-cert-405181.html#Operating_Systems

Is it possible to Install Oracle Linux 6.2 64-bit in Itanium Server?

Hi Gurus,
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.
Regards
Hasan Al Mamun
Systems Analyst
Bangladesh Bank
Dhaka, Bangladesh.

HasanAlMamun wrote:
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.It's not possible. We do not provide Oracle Linux 6 for Itanium.

Oracle linux 7 change resolution at install vmware

Hi,
while installing oracle linux 7 on vmware, my window is to small 800x600. In this case I can't see all option when I want to create LVM.
Is it possible to increase the resolution?
I have already tried increasing the memory for video card. Didn't help.
Regards!

Could you try this?
Create a file, /etc/yum.repos.d/vmware-tools.repo, with the following content:
[vmware-tools]
name = VMware Tools
baseurl = http://packages.vmware.com/packages/rhel7/x86_64/
enabled = 1
gpgcheck = 1
Install the package:
$ sudo yum install open-vm-tools
Reboot
I also prefer Virtualbox but I hope this helps.

Cannot find an Oracle Linux installation for 32 bit machines

Can anyone show me where to find a linux oracle 11g or 10g installation for a 32 bit machine.
The ones I downloaded from oracle are all for x86 64bit machines.
Thanks

On following page
http://www.oracle.com/technology/software/products/dat
abase/index.html
this is the link
http://download.oracle.com/otn/linux/oracle11g/linux_x
86_11gR1_database.zipWhat I actually said is that the link provided is for 64bits linux machines.
When I try running uname -r on my linux bash prompt, I get the i3686 tellin g me that I am running a 32bit machine.
On the other hand, installation guide specifies that we should check the kernel version and system architecture.
I don't think I should continue installation on seeing that I am trying to install a 64bit product on a 32bit system.
Regards,
Michael
Message was edited by:
okmich

How to Create Oracle Linux 5.7 64 bit Bootable DVD

Hi Guru's,
I have downloaded the OEL 5.7 64 bit from E-delivery.
Below are the 2 zip filesV27570-01.zip and V27572-01.zip.
I have extracted the V27570-01.zip and it's contained another zip called 'OracleLinux-R5-U7-Server-x86_64-dvd.iso'.
If I extract the 'OracleLinux-R5-U7-Server-x86_64-dvd.iso' file then following folders and files exists.
Folders - Cluster,ClusterStorage,images,isolinux,Server,VT.
Files - .discinfo,.treeinfo,blafdoc.css,EULA,eula.en_US,eula.py,GPL etc.
Could you please help me to create a bootable DVD for OEL 5.7 64 bit.
Shall i just burn the DVD with OracleLinux-R5-U7-Server-x86_64-dvd.iso zip file?
I am unable to understand how to create the bootable DVD for OEL 5.7 using those two zip files(V27570-01.zip and V27572-01.zip).
Somebody can help me step by step to create a bootable DVD for OEL 5.7.
Thanks in advance

What possible reason could there be to install OL 5.7 since 5.9 is already available?
Anyway, you do not need the source distribution or any boot CD. The standard installation DVD (V36332-01) is bootable and contains the necessary installation packages.
If the download file has a .zip file name extension you need to unzip the ISO image before burning it to DVD. The download of version 5.9 is no longer zipped. In any case, before burning the ISO image file, make sure the file you download is not corrupted. You can check the "View Digest" page from the Oracle edelivery software download page and verify the checksum with the file you downloaded.
The checksum must match, otherwise the downloaded file cannot be used.
Under Microsoft Windows, see the following knowledgebase article:
http://support.microsoft.com/kb/841290
Under Linux and Mac OSX:
$ openssl sha1 oracle_linux.iso
To burn the ISO image:
http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-from-an-ISO-file
For Apple Mac OS X and older versions of MS Windows:
http://www.wikihow.com/Burn-ISO-Files-to-DVD
If you use any Type 2 virtualization software, such as VirtualBox, you do not need to burn any DVD and can use the ISO file directly.

Oracle 8.1.6(bundled CD) install problem (ld failed)

Hello...
I tried to install oracle 8.1.6 into server. But I failed 3 more times.
I don't know why. Please help me...
According to the Oracle's install guide, I
1) Added semaphore and shared memory info. to /etc/system
and
2) Install Intel Solaris 8 recommended patches.
3) Install Forte C/C++ compiler. ( I used gcc for install. After failure,
I cahanged compiler from gcc to Forete).
I have no problem for mounting CD-ROM. But
while copying and linking Oracle files, OUI gave me error messages such as " ld failed ..." .
So I tried do manually such like this, "# make -f ins_plsq.mk install" . But the result was the same.
Do you have any idea for this error?
Thsnks.

Please see error messages...
chmod 755 /u01/app/oracle/product/8.1.6/bin
rm -f wrap
Linking wrap
LD_RUN_PATH=/u01/app/oracle/product/8.1.6/lib:/u01/app/oracle/product/8.1.6/rdbms/lib:/u01/app/oracle/product/8.1.6/JRE/lib/i386/native_threads;export LD_RUN_PATH; ld -o wrap -L/u01/app/oracle/product/8.1.6/plsql/lib/ -L/u01/app/oracle/product/8.1.6/lib/ -dy /u01/app/oracle/product/8.1.6/lib/SC5.0/crti.o /u01/app/oracle/product/8.1.6/lib/SC5.0/crt1.o /u01/app/oracle/product/8.1.6/lib/SC5.0/crtn.o /u01/app/oracle/product/8.1.6/plsql/lib/s0plsw.o -lpsa8 -lpls8 -lplp8 -lclntsh `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /u01/app/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /u01/app/oracle/product/8.1.6/lib/sysliblist` -lm /u01/app/oracle/product/8.1.6/lib/libplc8.a -lpls8 -lclient8 -lnl8 -lnro8 -ln8 /u01/app/oracle/product/8.1.6/rdbms/lib/kpudfo.o -lmm -ltrace8 -lgeneric8 -lcommon8 -lslax8 -lcore8 -lnls8 -ldbicx8 -lcore8 -lsql8 `cat /u01/app/oracle/product/8.1.6/lib/sysliblist` -Y P,/opt/SUNWspro/lib:/opt/SUNWspro/WS6U2/lib:/u01/app/oracle/product/8.1.6/lib:/usr/openwin/lib:/usr/bin:/usr/lib:/usr/ucb/lib:/usr/java/lib:/usr/ccs/lib:/usr/lib -lc -laio -lm
Undefined first referenced
symbol in file
skgmaddress /u01/app/oracle/product/8.1.6/lib//libclntsh.so
skgupvectorpost /u01/app/oracle/product/8.1.6/lib//libclntsh.so
kpummini /u01/app/oracle/product/8.1.6/lib//libclntsh.so
slfisk /u01/app/oracle/product/8.1.6/lib//libclntsh.so
sslssunreghdlr /u01/app/oracle/product/8.1.6/lib//libclntsh.so
sgslun0ReadEnabled /u01/app/oracle/product/8.1.6/lib//libclntsh.so
osnpor /u01/app/oracle/product/8.1.6/lib//libclntsh.so
ld: fatal: Symbol referencing errors. No output written to wrap
*** Error code 1
make: Fatal error: Command failed for target `wrap'

Oracle 10g Express Edition Beta 3 Install Problems

I made three install attempts for this software, and I'll detail them below.
This was a fresh install on a computer that previously had no other version running
ATTEMPT 1
The installation procedure ran, but even though the OracleServiceXE service started, the server wouldn't work and I couldn't connect to it.
c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log contained the following...
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'D:\utils\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
I proceeded to uninstall and then reinstall in attempt 2.
ATTEMPT 2
This time, the installation procedure ran but didn't finish. It got up to the point where it said "Creating and starting services for Oracle Database 10g Express Edition..." and it sat there for a long time doing nothing, but there was a process "IDriver.exe" using a large percentage of the CPU all that while.
I ended up having to kill the installation process with the task manager to stop it, and then since the installation wasn't successful had to manually delete everything in c:\oraclexe
ATTEMPT 3
This time the installation went a lot better and after the install, everything in c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log looks normal.
I am able to connect to the database with sqlplus now, but the OracleXETNSListener process won't start.
When starting, it says this, but the OracleXETNSListener doesn't stay running:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service was started successfully.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The OracleServiceXE service is starting.
The OracleServiceXE service was started successfully.
If I start the service in the windows services application it says "The OracleXETNSListener service on Local Computer started and then stopped..."
However, if I explicitly run c:\oraclexe\app\oracle\product\10.2.0\server\bin\tnslsnr.exe from the commandline, it works.
Why won't it start as a service?

Hello
I have the same problem.
My config :
- XP SP 2
Other installed products :
- last version Oracle JDevelopper
- Oracle Client 9.2.0 (the service does not run)
By the way,
JDev needs ORACLE_HOME set (c:\oracle for me).
Should Oracle XE be installed in %ORACLE_HOME% too or in an new empty folder (like c:\oraclexe) as it is recommended by the installer
I checked if I already use the port 1521 using netstat /ab but it seems this port is not used.
On a second PC, it works well.
How can I access the DB on my secondary PC from jdev on my priomary PC?
--> how can I only install OracleXE client on my primary PC?
Rgds
Guillaume

Oracle Express Server 6.3.4 instalation problem

I am trying to install Oracle Express Server 6.3.4 on linux. But it hangs at 54%. No errors reported in the install log file.

Hi,
But it hangs at 54%. No errors reported in the install log file.At what script/stage/step the installation hangs? Could you please post that part from the installation log file?
Review the troubleshooting part in the installation manual and see if it helps.
Oracle Express Server Documentation
http://www.oracle.com/technology/documentation/express_server.html
Regards,
Hussein

Creating a DNS Server on Oracle Linux 5.8 64 bit

Hi Guys,
I am creating a DNS host setup to resolve the SCAN IPs used in Oracle 11g R2 RAC. The Idea is to resolve 3 IP addres in a round robin fashion.
I am not a hard core linux admin just a DBA.
Please help me get a pointer to troubleshoot this issue.
ovmdnsbox is my DNS HOST going to be used by clusterhost1 and clusterhost2. Want to configure sangramkeshari.net as my domain.
ON ovmdnsbox
=====================
added entry in /etc/named.conf
zone "sangramkeshari.net" IN {
type master;
file "sangramkeshari.net.zone";
allow-update { none; };
zone "56.168.192.in-addr.arpa" in {
type master;
file "56.168.192.in-addr.arpa.zone";
[root@ovmdnsbox named]# pwd
/var/named
[root@ovmdnsbox named]# cat sangramkeshari.net.zone
$TTL 86400
@ IN SOA sangramkeshari.net. sangramkeshari.net. (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
localhost IN A 127.0.0.1
clusterhost-x-scan IN A 192.168.56.131
clusterhost-x-scan IN A 192.168.56.132
clusterhost-x-scan IN A 192.168.56.133
[root@ovmdnsbox named]# cat 56.168.192.in-addr.arpa
$ORIGIN 56.168.192.in-addr.arpa.
$TTL 1H
@ IN SOA sangramkeshari.net. root.sangramkeshari.net. ( 2
3H
1H
1W
1H )
56.168.192.in-addr.arpa. IN NS sangramkeshari.net.
131 IN PTR clusterhost-x-scan.sangramkeshari.net.
132 IN PTR clusterhost-x-scan.sangramkeshari.net.
133 IN PTR clusterhost-x-scan.sangramkeshari.net.
[root@ovmdnsbox named]# service named start
Starting named:
Error in named configuration:
zone localdomain/IN: loaded serial 42
zone localhost/IN: loaded serial 42
zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700
zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 1997022700
zone 255.in-addr.arpa/IN: loaded serial 42
zone 0.in-addr.arpa/IN: loaded serial 42
my.internal.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.internal.zone/IN: loaded serial 1
slaves/my.ddns.internal.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.ddns.internal.zone/IN: loaded serial 1
zone sangramkeshari.net/IN: loaded serial 42
zone 56.168.192.in-addr.arpa/IN: loading master file 56.168.192.in-addr.arpa.zone: file not found
internal/56.168.192.in-addr.arpa/in: file not found
my.external.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.external.zone/IN: loaded serial 1
[FAILED]

SangramKeshariDash wrote:
Hi Guys,
I am creating a DNS host setup to resolve the SCAN IPs used in Oracle 11g R2 RAC. The Idea is to resolve 3 IP addres in a round robin fashion.
I am not a hard core linux admin just a DBA.
Please help me get a pointer to troubleshoot this issue.
ovmdnsbox is my DNS HOST going to be used by clusterhost1 and clusterhost2. Want to configure sangramkeshari.net as my domain.
ON ovmdnsbox
=====================
added entry in /etc/named.conf
zone "sangramkeshari.net" IN {
type master;
file "sangramkeshari.net.zone";
allow-update { none; };
zone "56.168.192.in-addr.arpa" in {
type master;Note filename below:
file "56.168.192.in-addr.arpa.zone";
[root@ovmdnsbox named]# pwd
/var/named
[root@ovmdnsbox named]# cat sangramkeshari.net.zone
$TTL 86400
@ IN SOA sangramkeshari.net. sangramkeshari.net. (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
localhost IN A 127.0.0.1
clusterhost-x-scan IN A 192.168.56.131
clusterhost-x-scan IN A 192.168.56.132
clusterhost-x-scan IN A 192.168.56.133
Note filename here:
[root@ovmdnsbox named]# cat 56.168.192.in-addr.arpa
$ORIGIN 56.168.192.in-addr.arpa.
$TTL 1H
@ IN SOA sangramkeshari.net. root.sangramkeshari.net. ( 2
3H
1H
1W
1H )
56.168.192.in-addr.arpa. IN NS sangramkeshari.net.
131 IN PTR clusterhost-x-scan.sangramkeshari.net.
132 IN PTR clusterhost-x-scan.sangramkeshari.net.
133 IN PTR clusterhost-x-scan.sangramkeshari.net.
[root@ovmdnsbox named]# service named start
Starting named:
Error in named configuration:
zone localdomain/IN: loaded serial 42
zone localhost/IN: loaded serial 42
zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700
zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 1997022700
zone 255.in-addr.arpa/IN: loaded serial 42
zone 0.in-addr.arpa/IN: loaded serial 42
my.internal.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.internal.zone/IN: loaded serial 1
slaves/my.ddns.internal.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.ddns.internal.zone/IN: loaded serial 1
zone sangramkeshari.net/IN: loaded serial 42Note error message here:
zone 56.168.192.in-addr.arpa/IN: loading master file 56.168.192.in-addr.arpa.zone: file not found
internal/56.168.192.in-addr.arpa/in: file not found
my.external.zone.db:1: no TTL specified; using SOA MINTTL instead
zone my.external.zone/IN: loaded serial 1
[FAILED]

Labview 2011 64-bit install problem

I'm trying to install the 64 bit version of LabView onto a win7 64 laptop. The install seems to go ok. When I try to run it, it crashes with this exception 0xC06D007E$r. I've tried uninstall/reinstall and I still get the same error. I have the 32 bit version of LabView 2011 installed on this machine and it runs fine. What else should I be looking at?
Thanks
dp
Attachments:
lvlog.txt ‏2 KB

To address the point made by smercurio_fc, the Program Files (x86) folder is generally reserved for 32 bit applications. As I understand, Windows uses the distinction purely for organization. Having done more reseach, I will concede that we should look for a different workaround.
By your responses, it seems you may not need LabVIEW 32 bit. This article discusses the pros and cons of each version. This Q&A may be particularly useful in deciding whether or not you can continue on 64 bit alone.
Q. Which LabVIEW modules and toolkits are available for LabVIEW 64-bit?
A. Currently, the NI Vision Module, Application Builder, and Measurement Suite for Fixed WiMAX are available for use in LabVIEW 64-bit. Any other modules and toolkits must be run using LabVIEW 32-bit. See this Developer Zone Tutorial for more information.
Depending on your applicaion, this could be our solution If you are able to install LabVIEW 64 bit after uninstalling the 32 bit version.
KyleP
Applications Engineer
National Instruments

IMAQdx Windows 7 64 bit install problems

Hello all,
THis is the third time I have installed Vision tools 2010 where IMAQdx did not install and I have had to manually install the missing parts. Anyone had this problem? Is there a fix for this? The software is activated so this is not the issue.
Thanx,

Greetings,
When you say that IMAQdx did not install, do you mean that the install failed or errored out in some way? Or do you mean that the installation just did not happen and you could not see the software on MAX?
And manually install the missing parts, would you mean that you later installed IMAQdx alone and it worked fine?
Finally, when in the process did you activate the software and what was the installation procedure; as in, what order did you install your software in?
Would you happen to be using LabVIEW or simply using MAX? If so, what version of LabVIEW? Finally, would you happen to have some sort of antivirus system that may be blocking some of the installations, particularly those that automatically connect to the internet?
I wish you a great day!
Simon P.
National Instruments
Applications Engineer

Redhat Linux ES w/SATA HDD install problem

I'm trying to install Redhat Linux ES
on a AMD64 K8N Neo2 mainboard based on
the NVIDIA nForce 3 Ultra Chipset.
I'm using 2 SATA Seagate HardDrives with
or without RAID.
It won't install because
Redhat's OS installation scripts states that it doesn't detect
any Harddrives, even though BIOS sees them.
It prompts me to install a HDD Driver.
I can't seem to find one for this system.
Is Redhat installation with SATA drives possible?
Thanks
Jay

I don't think there are driver for linux yet.

Oracle Linux 6.0 64 bit instalation problem

Similar Messages

Maybe you are looking for