Oracle Linux 6.2 64bit install problem

Hi all,
I had a installation problem of 64bit Oracle Linux 6.2 with HP proliant dl380 g7 (build-in P410i array controller),
when i try to install the OS, it will keep in black screen after loading the vmlinuz.
I had try the 5.8 32bit version it can pass the vmlinuz.
So, I guess it may be related to driver.
Does any one can help me fix this problem.
thanks,
Kenny

I suggest to try the following:
When the bootloader screen prompts you to press any key to enter the menu... press any key.
Move the cursor to your default Linux kernel, normally Oracle Linux UEK and press the letter 'e'.
Move the cursor down 1 line to the kernel parameter and press the letter 'e' again.
Add the word "nomodset".
If you want to see more details, remove "rhgb quiet"
Press the Enter key when done
Press the letter 'b' to boot the system
If all works, edit /etc/grub.conf and modify the kernel parameter line for a permanent change.

Similar Messages

Oracle 9i database server 64bit installing problem.

Hi ,
Can anyone provide me a suitable solution,
iam installing oracle 9i database server 64 bit at Windows server 2003 64bit enterprise edition, it shows me some exception error and do not allow me to install.
ERROR IS
(The image file C:\oracle 9i db\Disk_1\install\win64\setup.exe is valid, but is for machine type other than the current machine)
Same setup i run at windows XP 64 bit but same error occurs.
what is this issue , why it comes out
thanks

860707 wrote:
Hi ,
Can anyone provide me a suitable solution,
iam installing oracle 9i database server 64 bit at Windows server 2003 64bit enterprise edition, it shows me some exception error and do not allow me to install.
ERROR IS
(The image file C:\oracle 9i db\Disk_1\install\win64\setup.exe is valid, but is for machine type other than the current machine)
Same setup i run at windows XP 64 bit but same error occurs.
what is this issue , why it comes out
thanksHi
Are you sure that you are trying to install the correct version? It seems like it's for Microsoft Windows Itanium (64-bit) edition.
Best Regards,
Gokhan Atil
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Oracle LINUX 6.3 ISO has problem

Hi All,
I'm trying to install Oracle Linux 6.3 on my i5 desktop. Initially I installed it without disk check, the install was successfull but the OS would behave strangely. Buttons were invisible and messages on screen were not visible properly.
I tried installing it 3 times but at the time of install also button labels were missing.
Then I tested the DISK and it showed its corrupt.
Y'day I downloded the ISO from Oracle Official site (edelivery) again but disk test for it also failed.
I have Oracle 6.2 also and disk check for it was successfull.
But when I try to install it on my desktop my system goes in standby mode automatically.
So tehre are issues
1) Not able to install Linux 6.3 as downloads are corrupt.
2) Not able to install Linux 6.2 as system gos in standby mode when booting from DVD.
Thanks in advance.

You can verify the integrity of the ISO download by comparing your SHA-1 checksum with the information shown under the "View Digest" button at the Oracle edelivery download page. If the checksum is fine, the problem is your system.

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

Acroread 32bit causing vnc console issue on Oracle Linux 6.1 64bit

Hi,
When we install Acroread 32 bit on oracle linux 6.1 64 bit vm's losing access to VNC console, seeing just black screen in console. I think 32 bit libraries is causing the issue. I would like to know if 64 bit Acroread is available to install on Oracle linux 6.1 64 bit vm's. We are using Oracle Application for printing pdf files which used acroread to open pdf files. Please suggest on this.
Thanks
Abdul

By Acrowriter I guess you mean Acrobat. Hasn't been available for a *ux platform since 3.0 over 15 years ago.

Linux 64bit Install problem

Hi there
I am trying to install Nitrox from ExpressNitroXFreeInstall-425.tar
My Environment :
[vattern@ferrari Desktop]$ java -version
java version "1.5.0_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_04-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_04-b05, mixed mode)
[vattern@ferrari Desktop]$ uname -a
Linux ferrari 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:56:33 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux
[vattern@ferrari Desktop]$
I get the following errors :[vattern@ferrari Desktop]$ ./NitroXInstaller.bin
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/opt/java/jdk1.5.0_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[vattern@ferrari Desktop]$
Any help / ideas ?
I realy would like to use Nitrox on my 64bit machine ...
Thanx
Thys

Edit the .bin file with hexedit and change the strings LD_ASSUME_KERNEL=2.2.5 to something link
XD_ASSUME_KERNEL=2.2.5
worked here to start the installer. because the LD_ASSUME_KERNEL does not work more on FC4
Hi thereI am trying to install Nitrox from ExpressNitroXFreeInstall-425.tar
My Environment :
[vattern@ferrari Desktop]$ java -version
java version "1.5.0_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_04-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_04-b05, mixed mode)
[vattern@ferrari Desktop]$ uname -a
Linux ferrari 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:56:33 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux
[vattern@ferrari Desktop]$
I get the following errors :[vattern@ferrari Desktop]$ ./NitroXInstaller.bin
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/opt/java/jdk1.5.0_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[vattern@ferrari Desktop]$
Any help / ideas ?
I realy would like to use Nitrox on my 64bit machine ...
Thanx
Thys

Problems Installation OEM 12c on Oracle Linux 6.3 64Bit

Hi
I am seeing the following messages in the logs during installation, it happens when it gets to 20%
INFO: Start output from spawned process:
INFO: SaveInvWCCE JRE files in Scratch ":0"
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch ":0"
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: encapsulating aggrname:
INFO: encapsulating aggrfile Name:
INFO: encapsulating aggr file loc:
INFO: copying from /
INFO: OUI-10185:Unable to copy '/' to '/u01/app/oracle/em12/agents//plugins/oracle.sysman.emrep.agent.plugin_12.1.0.2.0/inventory/ContentsXML/ConfigXML/.1_0_0_0_0.xml'. OUI-10187:/ is a directory, specify a valid filename.
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2012-12-31_11-54-09-AM
All the checks are successfull and I don't understand why its trying to copy from "/", is it a bug ? I am instlling it as oracle user, I don't get any errors on the installation screen but it gets stuck at 20% and nothing happens afterwards
Thanks for your help.
Rgds
Terry

I moved the the software to a different directory and it worked - strange enough !
Terry

Oracle 11g for WinXP VirtualMachine install problem

Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?

957717 wrote:
Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?What is the full path name to the directory where unzipped the files?
Do a system 'find' and locate 'em.ear'. What is the full path name to it? At acommand prompt, enter the following:
cd \
dir /s em.earcopy the entire session -- command and results, and paste back here.
Also, does the path to the installation files contain any spaces? Does the path to the installed ORACLE_HOME contain any spaces?
You have my condolences for having to work with Windows. To paraphrase a line from a popular movie . . "My momma always said Windows was like a box of chocolates."
Edited by: EdStevens on Sep 7, 2012 3:42 PM

Oracle 8i EE Solaris 7 install problem

Install 8i(8.1.7) with minimal(or typical) option. Everything went fine until it stalled at step "initializing database" during creating a startup db, with error message "ORA-03114, not connected to Oracle". I ignored it, and then it comes with another error "ORA-27101: shared memory realm does not exist". Anyway, database creation fails.
I have searched the newgroups and found a few similar messages but no formal answers
were found. By the way, I applied all OS patches and made sure pre-install setup. Strangely, I did the same install on the machine with Oracle 8.1.5 without problem.
Any idea ? Thanks
null

seems which the PROCESSES parameter of init.ora changed in 815 -> 817 from 50 to 150
so the kernel parameters in /etc/system cannot be suficient large to startup the database, I has the same problem and increasing the parameters which affect the PROCESSES in init.ora, solved it
null

Pls hlp: Oracle 8.16/Forms 6i Install Problems

I am currently running Oracle 8.16 on WIN2K w/o any problems. I want to install Forms and Reports 6i on same machine. Pls tell me how to correctly install Forms and Reports 6i and allow me to use current database in Oracle 8.16.. Thanks

First of all, I wouldn't recommend it. We have many years of experience with Oracle versions 7 through 8i Release 2 and the various incantations of Developer from 2.1 through 6i and the simple fact is that if you try to run them on the same NT system, you will have nothing but headaches. In fact, I would not even run Forms Server and Reports Server on the same machine and definitely NOT either on an 8.1.6 server.
That having been said, begin by reading the 8i Administrator's Guide for Release 2 (8.1.6) for Windows NT. Chapter 3 explains the Optimal Flexible Architecture (OFA, which is a solution to the problem you describe but which cannot easily be retrofit onto even the most current versions of Developer, which use older versions of Net8. This chapter should discourage you even more, but if it doesn't....
Remember that you will need to create your 8.1.6 ORACLE_HOME, FIRST! Install your server there.
Next, install your Forms and Reports Servers:
1. You MUST create a separate ORACLE_HOME for each of these.
2. Don't install these on the same machine as each other or 8.1.6 if you are going to use OEM to start them. In other words, install them as NT services.
3. Ideally (and I mean STRONGLY recommended). Create two adminstrator-level accounts, one for each of Reports Server and Forms Server and do the install as someone in this account. Make sure that you have a default printer set up for the Oracle Reports Server account.
4. Make sure that your DEFAULT ORACLE_HOME is the home of the Forms Server for the Forms Server operation (and the DEFAULT ORACLE_HOME for the REPORTS_SERVER is the Reports Server ORACLE_HOME). This is why you do not want to install these as Administrator. If you do, you'll run into loads of problems with networking.
5. You will need to make note of your NT Registry AFTER the 8.1.6 install but BEFORE the Forms/Reports server install and AFTER the Forms/Reports server install. The registry entries for Oracle products changed with OFA so you will end up with a hybrid of the pre-OFA (Forms/Reports registry) and the OFA registry. Since software using the former will not look for keys created by the latter, make sure that you enter your configuration details (such as REPORTS60_REPORTS_SERVER) in the right branch or things won't work and you won't know why.
Again, I would strongly recommend that you don't do this, but rather, you get a couple of dedicated machines to run the Forms and Reports Server.
Also, if you are going to make either of these accessible via the Web, you will need to consider your WebDb (or alternative) setup as well.
FYI, after trying NUMEROUS configurations with these, we now run 8.1.6, Forms Server and Reports Server on three different machines and run the Web CGI's for Forms and Reports on a fourth machine. That is what I would recommend that you do.

Win7 and newest itunes 64bit install problem

I have not seen my itunes installation problem here on the forum yet. I hope someone can help.
I completely removed Itunes per the Apple instructions, in the correct order, and verified all was gone from the computer. I downloaded the latest version for my 64bit computer (Win7), which currently is 10.5.1 for windows 64bit system. After installing it, I receive a message saying that "this ipod cannot be used because the required software is not installed. Run the itunes installer to remove itunes then reinstall the 64bit version of itunes.
I've done that no less than 4 times now, same message. Has someone a fix or idea for this problem?

Try to use 10.3 instead, the 10.5.1 dont work on all PC computers, I couldent install the 10.5.1 but 10,3 installes without any problem. I have a good cumputer so it is nothing wrong there so it is only a bad program from apple.

Oracle VM Server 2.2 Install Problems (Management Info Screen Skipped)?

Hi,
I am new to Oracle VM Server and I basically following the install guide to install the server on a spare machine we have in the office (a relatively new Dell with an i7 processor and 8gb memory) so we can evaluate it and play with it a bit.
When running the install from a bootable CD everything goes as expected and documented in the install guide up to point number "11. The Oracle VM Management Interface screen is displayed." - when we install it skips these screens and jumps directly to step "15. TimeZone Selection."
We continued with the install but when the VM Server comes up we have no network enabled?
Any help would be greatly appreciated.
Regards,
Bren

Hi BOF,
if the network screen is not displayed during installation, the network card could not correctly be identified, and it may be that the network drivers are not installed.
If you are lucky, the network is still detected and working, but not with the correct drivers.
Did you use OVM Server 2.2. or the latest 2.2.1 (which includes some more network card detections?).
Otherwise I recommended getting the correct network drivers for the card and installing them after the server is running.
Keep in mind, that OVM Server 2.2 is based on OEL 5.3 (respectivly RHEL 5.3) if you are looking for the correct drivers.
Maybe this thread on realtek network cards can give you some more information:
oracle vm - network issue
Regards
Sebastian

Vmware workstation 6.5.3 64bit Install problems

I'm having trouble installing the official Vmware Workstation 6.5.3 64bit bundle from vmware.com. The install always hangs at the Vmware Player configuration.
I've tried both the graphical install, using:
kdesu sh VMware-Workstation-6.5.3-185404.x86_64.bundle
and from the command line:
# sh VMware-Workstation-6.5.3-185404.x86_64.bundle --custom --console
I see no error messages, and the installers stop at the same place in both instances (configuring Vmware Player). The command line version reports the install to stop at 62%. I've left the install run while I was at work (all day), and nothing changed.
When I kill the installer using xkill or killall, I am able to use Player (although I can't run any vms in it), but workstation itself is not installed (I have no /usr/bin/vmware binary).
Any help would be appreciated.
I'm using kernel 2.6.30-ARCH. I cannot patch the modules because the install does not complete, before you ask.
Thank you.

My vmware install logs don't really help here but they do show where it trails off into oblivion:
Sep 06 21:47:10.011: app| Log for VMware Workstation pid=26637 version=6.5.3 build=build-185404 option=Release
Sep 06 21:47:10.012: app| Host codepage=UTF-8 encoding=UTF-8
Sep 06 21:47:11.081: app| Extracting the sources of the vmmon module.
Sep 06 21:47:11.117: app| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/2.6.30-ARCH/build/inc$
Sep 06 21:47:20.240: app| The vmmon module loads perfectly in the running kernel.
Sep 06 21:47:20.240: app|
Sep 06 21:47:20.265: app| Registering file: /usr/lib/vmware/installer/vmware-installer --register-file vmware-player regular /lib/modules/2.6.30-ARCH/misc/vmmon.o
Sep 06 21:47:20.616: app| Registering file: /usr/lib/vmware/installer/vmware-installer --register-file vmware-player regular /lib/modules/2.6.30-ARCH/misc/vmmon.ko
Sep 06 21:47:21.673: app| Extracting the sources of the vmnet module.
Sep 06 21:47:21.697: app| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/2.6.30-ARCH/build/inc$
Last edited by jebus (2009-09-06 18:51:34)

How to upgrade Mercurial 1.4 to 2.6 in Oracle Linux 6.3 (64bit)

Hi,
I have installed Mercurial 1.4 in my server using "yum install mercurial" command. Now i want to update it to 2.6 version.
While trying "yum update mercurial" command, it gives me the below output.
Loaded plugins: security
Setting up Update Process
No Packages marked for Update
Kindly let me know how to accomplished this activity.
Thanks,
Shibankar.

People howl for two years to get Java 6 and now you want 1.4 back. Sigh.
Here you go, good luck!
http://hints.macworld.com/article.php?story=20100123192950640

Install Oracle eBusiness 12 on Oracle Linux 5.7

Hi All,
My name is John and I have some questions in relation to the installation of Oracle eBusiness 12 on Oracle Linusx 5.7 64bit. Here is what I've done so far:
- I installed Window 7 on my Macbook Pro Retina Display using Boot camp.
- I installed VMware Player 5.00 on the Window 7 host.
- I installed Oracle Linux 5.7 64bit Guest in the VMware Player 5.00
- I performed 'yum update' on the Oracle Linux 5.7 Guest
- When I ran 'uname -r' it returned '2.6.32-300.39.1.el5uek'
- I updated the latest Rapid Install patch as described in Oracle Applications Release Notes, Release 12.1.1 (My Oracle Support Document 798258.1) and now the RapidWizVersion returned is 12.1.1.13.
My question is in Moc 761566.1, it stated that the following packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media on both application and database tiers:
•gcc-4.1.2-14.el5.x86_64
•gcc-c++-4.1.2-14.el5.x86_64
•glibc-2.5-18.i686 (32-bit)
•glibc-2.5-18.x86_64
•glibc-common-2.5-18.x86_64
•glibc-devel-2.5-18.i386 (32-bit)
•glibc-devel-2.5-18.x86_64
•libgcc-4.1.2-14.el5.i386
•libgcc-4.1.2-14.el5.x86_64
•libstdc++-devel-4.1.2-14.el5.i386
•libstdc++-devel-4.1.2-14.el5.x86_64
•libstdc++-4.1.2-14.el5.i386
•libstdc++-4.1.2-14.el5.x86_64
•libXi-1.0.1-3.1.i386
•libXp-1.0.0-8.1.el5.i386
•libXp-1.0.0-8.1.el5.x86_64
•libaio-0.3.106-3.2.i386
•libaio-0.3.106-3.2.x86_64
•libgomp-4.1.2-14.el5.x86_64
•make-3.81-1.1.x86_64
•gdbm-1.8.0-26.2.1.i386
•gdbm-1.8.0-26.2.1.x86_64
•sysstat-7.0.0-3.el5.x86_64
•util-linux-2.13-0.45.el5.x86_64
•compat-libstdc++-296-2.96-138.i386
•compat-libstdc++-33-3.2.3-61.i386
Since I'm not a Linux guru so I just ran a 'rpm -qa > all_rpm.txt' and open that output file and find whether I have all of those above installed rpms before installing Oracle eBusiness Suite.
First, I discovered that I do not have any 'gcc-c++-4.1.2-14.el5.x86_64' rpm installed on my Linux 5.7 64 bit guest system. Could you please advise how do I install this particular rpm because I thought after running the 'yum update' command, it would already have installed this rpm (gcc-c++-4.1.2-14.el5.x86_64) for me.
Also, is there any 'pre-test' that I can carry out to ensure that the Oracle eBusiness installation would be successful. Because in the past, I have attempted to install Oracle eBusiness twice but on both occasions, they have failed miserably with the Linux just hung and I have to perform the whole process again. Thank you for your assistance as I really want to have it installed on my Mac Book Pro successfully.
Regards,
John

Hi Hussein,
Thank you for the quick reply but here were that results when I followed your suggestion and I believe none of three have worked successfully and can you advise what I've done wrong or what I've forgotten to do, thank you for your assistance.
1.) After I executed 'yum install gcc-c++-*'
yum install gcc-c++-*
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (111, 'Connection refused')>
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.1.2-52.el5_8.1 set to be updated
--> Processing Dependency: libstdc++-devel = 4.1.2-52.el5_8.1 for package: gcc-c++
--> Running transaction check
---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5_8.1 set to be updated
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/filelists.xml.gz: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Error: failure: repodata/filelists.xml.gz from el5_latest: [Errno 256] No more mirrors to try.
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va nofiles nodigest
The program package-cleanup is found in the yum-utils package.
2.) After I executed 'yum install gcc-c*'
yum install gcc-c*
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.1.2-52.el5_8.1 set to be updated
--> Processing Dependency: libstdc++-devel = 4.1.2-52.el5_8.1 for package: gcc-c++
--> Running transaction check
---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5_8.1 set to be updated
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/filelists.xml.gz: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Error: failure: repodata/filelists.xml.gz from el5_latest: [Errno 256] No more mirrors to try.
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va nofiles nodigest
The program package-cleanup is found in the yum-utils package.
3.) After I executed 'yum install gcc-c++-4.1.2-14.el5.x86_64'
yum install gcc-c++-4.1.2-14.el5.x86_64
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Setting up Install Process
No package gcc-c++-4.1.2-14.el5.x86_64 available.
Nothing to do
Regards,
John

Oracle Linux 6.2 64bit install problem

Similar Messages

Maybe you are looking for