Oracle Linux 6.2 - hyper-threading
Hello
two simple questions, I hope 8^)
if I installed OL 6.2 and then also upgraded to UEK R2, on X64 Intel server - both tasks done with hyper-threading enabled and then I want to disable hyper-threading after OS installation - do I need to make any OS system/parameter changes at Linux OS level or simply turn off H/T at hardware level and reboot the server ?
is there general recommendation re when H/T is beneficial on Oracle Linux with UEK ?
what about if I added more RAM to the same 64-bit Intel server? Any Linux OS changes required to get all RAM recognised by OS ?
thanks!
A recommendation does not mean the absolute best solution for every situation. There has been no information about any particular software deployment or even the particular CPU in question.
I agree with you that enabling or disabling HTT in regard to achieving the best possible performance for a particular scenario is subject to testing. But, if someone asks me what is the recommendation about HTT in regard to Oracle UEK kernel, and possibly Oracle RDBMS, my suggestion is to use the default and leave HTT enabled. I'm not aware of any documentation that suggest to generally disable HTT when using Oracle. Saying "it depends" is scientifically correct, but not helpful.
There are already plenty of discussions about HTT on the net. You can turn HTT off and experience a performance increase, but there is also a chance the performance was even better with HTT enabled in a properly configured system or application. There are cases were HTT apparently slows down performance, but drawing a conclusion about enabling or disabling HTT in regard to performance is often too simple due to many other factors that can interfere with the results.
Dude the link you supplied referenced some old ibm information.Well, Hyper-Threading isn't a new feature.
For what it's worth, check out http://en.wikipedia.org/wiki/Hyper-threading in particular "Drawback history".
Or http://www.intel.com/support/processors/pentium4/sb/cs-017371.htm#1c which also links to more performance info.
Similar Messages
-
Oracle 9i R2 and Hyper threading
Hi
This is a matter of confusion to me, I've tested Oracle 9.2.0.1.0 on several machines with Hyper threading 1 CPU Intel and Dual Xeon servers.
When installing oracle the CPU_COUNT and PARALLEL_THREAD_PER_CPU parameters are set automatically.
ie: Intel 3.0 HT
CPU_COUNT = 2
PARALLEL_THREAD_PER_CPU = 2
Dual Xeon 2.8 HT
CPU_COUNT = 2
PARALLEL_THREAD_PER_CPU = 4
with this default settings our application is dragging it's feet (developped on 4.5 upgraded to 6i client/server)
But if we set
CPU_COUNT = 1
PARALLEL_THREAD_PER_CPU = 2
for the Intel the app goes lightspeed
and
CPU_COUNT = 1
PARALLEL_THREAD_PER_CPU = 1
for the xeon again lightspeed
I didn't face this problem with non HyperThreasding CPUs
My question:
Why is this anomoly, what's the workaround without changing the CPU_COUT parameter?
did anybody else face any problem like this? does this happen in 10g???
Thanks in Advance
Tony S. GarabedianAny suggestions? Any ideas??
-
Disable Intel CPU Hyper threading in Oracle RAC environment
Dear Expert,
Does disable CPU hyper threading will have direct impact or maybe unexpected behavior to Oracle RAC database?
Actually the background of this question is we have many received packet queuing on the network layer waiting to be processed. Investigation leads to the processor utilization which shows that many processor are still in idle state or not used when the other processors are busy processing incoming request.
I have visited some oracle note like
CPU Count Consideration for Oracle Parameter Setting When Using Hyper-Threading Technology (Doc ID 289870.1)
Oracle and Hyper-Threading (Doc ID 205089.1)
Using PROCESSOR_GROUP_NAME to bind a database instance to CPUs or NUMA nodes (Doc ID 1585184.1)
These document already give useful information but i wonder if there is any possibilities risk or another consideration of disabling cpu hyper threading.
Please let me know if any other information required.
Thanks.
Best Regards,
JollyAs far as I know it is set as cpu architecture and mobile chips don't have the option. Not 100% as I've never needed to do it.
Better bet would be to check Intel ark and forums with them I expect. -
Oracle Linux 6.3 and Oracle VM 3.0.3 : high "os thread startup" waits
Hi all,
we just installed Oracle Linux 6.3 as a PVM guest with Oracle VM 3.0.3.
The vm is acting as a dbserver.
We see high "os thread startup" wait times from statspack report. A 10-hour report shows:
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time
CPU time 13,819 57.5
db file sequential read 1,839,279 5,791 3 24.1
enq: TX - row lock contention 1 664 ###### 2.8
os thread startup 1,350 451 334 1.9
control file sequential read 166,312 386 2 1.6
This seems to be an OS or virtualization issue: if i run some very simple commands like "ls " or "top", sometimes I see them hangig some seconds .
What should I check for ?
Thanks,
AndreaThis will sound silly, but: Make sure you aren't a victim of the "Some Linux machines have high CPU utilization after Leap Second insertion on July 1st". If your server was "doing NTP", this might have happened. You can google this, if you didn't hear of it. A reboot makes it go away.
-
Oracle support Intel Hyper Threading??
Does anyone know if the Oracle 9i and 10g database supports Intel's new Hyper Threading technology???
Cody,
Please read Oracle's Note:205089.1 on metalink. -
Hello!
I will kindly ask for your honest opinions as I want to study for an Oracle Linux exam and I need to get the below indicated topics covered, but unfortunately I could not find a book to cover them all (as I did for Oracle 11g).
Please help me locate a book, two or how many are necessary to help me study for the exam and cover the following topics:
Thank you all!
Installing Enterprise Linux
Install Enterprise Linux on any supported architecture.
Create partitions, software RAID and LVM storage configurations.
Select Packages for Installation.
PC Hardware & Linux
Get detailed information about all PCI & USB devices that are connected to a Linux system
Identify, load, unload and configure kernel modules
Tune the running kernel using the /proc/ filesystem
Post-Install System Configuration
Set and maintain the system clock with date, hwclock and NTP
Install, update and remove RPM packages with the rpm & yum commands
Configure printers with CUPS
Create and use Kickstart files for automated, hands-off installations
Boot Process & SysV Init
Configure the GRUB boot loader
Manage SysV Init scripts, including customizing files under the /etc/sysconfig/ directory to tune SysV Init scripts
Configure and use SysV runlevels
Shutdown & reboot Linux systems
User/Group Administration and NFS
Describe and apply the User Private Group scheme
Create, delete and configure user and system accounts
Create, delete and configure groups
Customize the PAM configuration
Configure and control access to su and sudo
Configure Linux systems to use centralized authentication and user information stores for system logins
Implement a file server to share files with NFS v3 & v4
Configure the automounter (autofs) allowing un-privileged users to mount filesystems on-demand
Filesystem Administration
Work with device nodes and udev
Partition hard drives after installation
Create and tune filesystems
Mount filesystem, including persistent configuration in the /etc/fstab file
Create, manage and tune swap devices
Configure, manage, assign and maintain quotas on filesystems
Create, use and remove File Access Control Lists (FACLs)
LVM & Raid
Configure Logical Volume Manager volume groups and logical volumes
Create and use software RAID devices
Grow and shrink logical volumes and the filesystems on them
Use LVM snapshots to create consistent, reliable backups
Task Automation & Process Accounting
Use the at & batch facilities to run one-time tasks
Manage cron jobs for recurring tasks, both system-wide and per-user
Configure syslog for central system logging
View, manage and kill running processes
Monitor system and application logs on a daily basis with logwatch
Configure process accounting and examine the resulting logs
Limiting and measuring resource usage (ulimit, pam, sar, vmstat, iostat)
Client Networking
Configure TCP/IP networking on Linux systems
Configure static routing on a Linux system
Aggregate multiple network links into a single interface via the bonding driver's Etherchannel and 802.3ad support
Configure a Linux system to participate in multiple VLANs on a managed switch via 802.1q frame tagging
Configure and maintain a DHCP server
Using networking diagnostics tool (ping,arp,ethtool)
Enterprise Linux Fundamentals
What is Linux?
Identify the origins of UNIX and how Linux is related to UNIX
Describe the major goals of the Free Software Foundation and the GNU project
List key elements of a Linux distribution and name several distributions
List several standards that apply to Linux
Describe the basic mechanisms that make UNIX so powerful
Multi User Concepts
Describe the differences between the administrative (root) user and normal user accounts and explain when each should be used
Log into the system
Switch between accounts using the 'su' command
Use basic commands to gather information about the system
Use system help facilities to learn about commands and their options.
The Linux File System
List the standard system directories and explain what type of files are contained in each
Navigate the file system
Explain standard POSIX file permissions including special permissions such as the SUID, SGID and Sticky bits on both files and directories
Change permissions of files
Explain how file ownership (user: group) relates to file permissions
Change ownership of files
Describe how the User Private Group (UPG) scheme works and the problem it solves
Manipulating Files
Be able to create, delete, copy, move and rename files and directories
Describe the various types of files that can be stored on UNIX and Linux file systems
Explain hard links and symbolic links, their pros & cons and when & where they can or can not be used
Identify the type of content of any file
View the contents of both text-based and binary files
Search the file system for files and directories with specific properties
Text Processing
Search inside of files for specified information
Perform file editing, sorting, cutting & merging text files from the command linee
Shell Basics
Understand the varied roles the command shell plays in everyday UNIX/Linux usage
Pipe several commands together to perform more complex and useful processing
Use file redirection on the command line
Create and use shell and environment variables to configure and control the operation of the system, the command shell and programs
Use and escape special characters when they are used on the command line
Regular Expressions Construct regular expressions for matching text patterns
Archiving and Compression
Use tar & cpio to create archives and extract files from them
Compress and decompress files using the UNIX compress, GNU gzip, bzip2 and zip formats
Text Editing
Use simple text editors like pico and nano
Perform basic and intermediate text editing functions efficiently with vi & Vim
Perform basic and intermediate text editing functions with GNU Emacs
Command Shells
List the history and relationships of the various popular shell implementations available on UNIX and Linux systems
Identify and switch between the various shell implementations
Customize the command prompt on Bourne and BASH shells
Use command line history, command completion, aliases and command line editing
Customize command shell operation system wide and for individual users
Introduction to Shell Scripting
Process arguments passed into a shell script
Get input from the user of a shell script
Generate formatted output from a shell script
Perform tasks conditionally using if, case and while loops in a shell script
Perform repeated actions over a set of values with for loops on the command line and within shell scripts
Do math in a shell script
Process Management and Job Control
Describe the differences between process and threads
Find and control running programs with ps, top, kill, and nice
Use the jobs, fg and bg commands to view and access several tasks at once on a single shell
Use the screen command to run several programs and disconnect from running programs on remote systems
Messaging
Send local messages with the write and wall commands
Use talk and ytalk to chat with other users
Send and read email with the mail and pine commands
The Secure Shell
Configure the ssh client and sshd server programs securely
Establish secure, remote connections to other systems
Use SSH's key-based authentication
Managing Software
Find and download software via FTP & HTTP with text & graphical client programs like wget, lftp, links, Konqueror and Mozilla Firefox
Install binary programs in RPM packages
List software already installed on the system with RPM
Compile and install software from source releases
Compile and install software from a source RPM (SRPM or .src.rpm) package
Printing
Use CUPS to connect to available local and network printers
Use various commands to process and convert files in preparation for printing
Send jobs to a printer
Monitor and remove print jobs
Mounting FileSystems and Managing Removable Media
Use the mount command
Access NFS and SMB filesystems over the network
Use autofs for on-demand mounting of filesystems without root privileges
X Window System
Start the graphical environment manually
Select different desktop environments
Launch graphical applications
Use Linux as an X terminal
Customize the graphical environment and auto-start applications at login and X startup
Securely tunnel remote graphical applications through SSHHello!
I will kindly ask for your honest opinions as I want to study for an Oracle Linux exam and I need to get the below indicated topics covered, but unfortunately I could not find a book to cover them all (as I did for Oracle 11g).
Please help me locate a book, two or how many are necessary to help me study for the exam and cover the following topics:
Thank you all!
Installing Enterprise Linux
Install Enterprise Linux on any supported architecture.
Create partitions, software RAID and LVM storage configurations.
Select Packages for Installation.
PC Hardware & Linux
Get detailed information about all PCI & USB devices that are connected to a Linux system
Identify, load, unload and configure kernel modules
Tune the running kernel using the /proc/ filesystem
Post-Install System Configuration
Set and maintain the system clock with date, hwclock and NTP
Install, update and remove RPM packages with the rpm & yum commands
Configure printers with CUPS
Create and use Kickstart files for automated, hands-off installations
Boot Process & SysV Init
Configure the GRUB boot loader
Manage SysV Init scripts, including customizing files under the /etc/sysconfig/ directory to tune SysV Init scripts
Configure and use SysV runlevels
Shutdown & reboot Linux systems
User/Group Administration and NFS
Describe and apply the User Private Group scheme
Create, delete and configure user and system accounts
Create, delete and configure groups
Customize the PAM configuration
Configure and control access to su and sudo
Configure Linux systems to use centralized authentication and user information stores for system logins
Implement a file server to share files with NFS v3 & v4
Configure the automounter (autofs) allowing un-privileged users to mount filesystems on-demand
Filesystem Administration
Work with device nodes and udev
Partition hard drives after installation
Create and tune filesystems
Mount filesystem, including persistent configuration in the /etc/fstab file
Create, manage and tune swap devices
Configure, manage, assign and maintain quotas on filesystems
Create, use and remove File Access Control Lists (FACLs)
LVM & Raid
Configure Logical Volume Manager volume groups and logical volumes
Create and use software RAID devices
Grow and shrink logical volumes and the filesystems on them
Use LVM snapshots to create consistent, reliable backups
Task Automation & Process Accounting
Use the at & batch facilities to run one-time tasks
Manage cron jobs for recurring tasks, both system-wide and per-user
Configure syslog for central system logging
View, manage and kill running processes
Monitor system and application logs on a daily basis with logwatch
Configure process accounting and examine the resulting logs
Limiting and measuring resource usage (ulimit, pam, sar, vmstat, iostat)
Client Networking
Configure TCP/IP networking on Linux systems
Configure static routing on a Linux system
Aggregate multiple network links into a single interface via the bonding driver's Etherchannel and 802.3ad support
Configure a Linux system to participate in multiple VLANs on a managed switch via 802.1q frame tagging
Configure and maintain a DHCP server
Using networking diagnostics tool (ping,arp,ethtool)
Enterprise Linux Fundamentals
What is Linux?
Identify the origins of UNIX and how Linux is related to UNIX
Describe the major goals of the Free Software Foundation and the GNU project
List key elements of a Linux distribution and name several distributions
List several standards that apply to Linux
Describe the basic mechanisms that make UNIX so powerful
Multi User Concepts
Describe the differences between the administrative (root) user and normal user accounts and explain when each should be used
Log into the system
Switch between accounts using the 'su' command
Use basic commands to gather information about the system
Use system help facilities to learn about commands and their options.
The Linux File System
List the standard system directories and explain what type of files are contained in each
Navigate the file system
Explain standard POSIX file permissions including special permissions such as the SUID, SGID and Sticky bits on both files and directories
Change permissions of files
Explain how file ownership (user: group) relates to file permissions
Change ownership of files
Describe how the User Private Group (UPG) scheme works and the problem it solves
Manipulating Files
Be able to create, delete, copy, move and rename files and directories
Describe the various types of files that can be stored on UNIX and Linux file systems
Explain hard links and symbolic links, their pros & cons and when & where they can or can not be used
Identify the type of content of any file
View the contents of both text-based and binary files
Search the file system for files and directories with specific properties
Text Processing
Search inside of files for specified information
Perform file editing, sorting, cutting & merging text files from the command linee
Shell Basics
Understand the varied roles the command shell plays in everyday UNIX/Linux usage
Pipe several commands together to perform more complex and useful processing
Use file redirection on the command line
Create and use shell and environment variables to configure and control the operation of the system, the command shell and programs
Use and escape special characters when they are used on the command line
Regular Expressions
Construct regular expressions for matching text patterns
Archiving and Compression
Use tar & cpio to create archives and extract files from them
Compress and decompress files using the UNIX compress, GNU gzip, bzip2 and zip formats
Text Editing
Use simple text editors like pico and nano
Perform basic and intermediate text editing functions efficiently with vi & Vim
Perform basic and intermediate text editing functions with GNU Emacs
Command Shells
List the history and relationships of the various popular shell implementations available on UNIX and Linux systems
Identify and switch between the various shell implementations
Customize the command prompt on Bourne and BASH shells
Use command line history, command completion, aliases and command line editing
Customize command shell operation system wide and for individual users
Introduction to Shell Scripting
Process arguments passed into a shell script
Get input from the user of a shell script
Generate formatted output from a shell script
Perform tasks conditionally using if, case and while loops in a shell script
Perform repeated actions over a set of values with for loops on the command line and within shell scripts
Do math in a shell script
Process Management and Job Control
Describe the differences between process and threads
Find and control running programs with ps, top, kill, and nice
Use the jobs, fg and bg commands to view and access several tasks at once on a single shell
Use the screen command to run several programs and disconnect from running programs on remote systems
Messaging
Send local messages with the write and wall commands
Use talk and ytalk to chat with other users
Send and read email with the mail and pine commands
The Secure Shell
Configure the ssh client and sshd server programs securely
Establish secure, remote connections to other systems
Use SSH's key-based authentication
Managing Software
Find and download software via FTP & HTTP with text & graphical client programs like wget, lftp, links, Konqueror and Mozilla Firefox
Install binary programs in RPM packages
List software already installed on the system with RPM
Compile and install software from source releases
Compile and install software from a source RPM (SRPM or .src.rpm) package
Printing
Use CUPS to connect to available local and network printers
Use various commands to process and convert files in preparation for printing
Send jobs to a printer
Monitor and remove print jobs
Mounting FileSystems and Managing Removable Media
Use the mount command
Access NFS and SMB filesystems over the network
Use autofs for on-demand mounting of filesystems without root privileges
X Window System
Start the graphical environment manually
Select different desktop environments
Launch graphical applications
Use Linux as an X terminal
Customize the graphical environment and auto-start applications at login and X startup
Securely tunnel remote graphical applications through SSH
How about posting this question in the Certification Forum
Since Oracle Linux is based on Red Hat Enterprise Linux, you can use and search "RHEL books". There should some. -
How to compile Oracle Linux source?
I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?
I tried to search this forum as well as other places but couldn't find any information hence thought of opening a thread before I proceed to download correct file which will again take 10+ hrs with my Internet speed :(
Any help is highly appreciated. Also I need to know which packages are required to be installed for compiling the source if at all that is possible. I am using Ubuntu 11.10 Desktop.
Thanks in advance for any help and hope to get a reply soon :) I need to urgently install Oracle 11gR2 on it.
Edited by: user6582219 on Apr 12, 2012 1:10 AM
While browsing the forum for any possible solution I came to a thread that discuss installation of a package oracle-rdbms-server-11gR2-preinstall. When searched through search engine I came to know about recent certification Oracle 11gR2 on Oracle Linux 6, here is the link https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.
I would still appreciate if someone could answer my question just for knowing the procedure compiling source. May be it can help someone else trying to achieve this.
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.
Before proceeding here are my environment details:
Machine: x86 32 bit with 2 GB RAM/250 GB HD.
OS: Kubuntu 11.10 Desktop and Oracle Linux 6 Update 2 in dual boot mode.
Here are my partition details for your reference but as I am planning to do the installation from the scratch following new ideal scheme you can jump to last paragraph following the line "*********************************" for my questions.
Unfortunately my partition plan went wrong and here is what I have now:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3d5ba9e1
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1002047 500000 83 Linux
/dev/sda2 151525080 361253654 104864287+ 7 HPFS/NTFS/exFAT
/dev/sda4 1003518 151001087 74998785 5 Extended
/dev/sda5 1003520 7002111 2999296 82 Linux swap / Solaris
/dev/sda6 7004160 11001855 1998848 83 Linux
/dev/sda7 11003904 51001343 19998720 83 Linux
/dev/sda8 51003392 110041087 29518848 83 Linux
Partition table entries are not in disk order
/dev/sda1 here is /tmp, /dev/sda2 is my data partition, I have separate /home / (root) partition for Kubuntu and remianing around 20 GB in extended partition is used for Oracle Linux 6.2 with default Oracle suggested LVM partition. I also have separate /boot for Kubuntu and I chose not to install grub while installing Oracle Linux. I later modified grub.cfg to add entries for Oracle Linux and now I can boot both OSs successfully.
My issue now is I cannot extend 20 GB space (in extended partition) that I have given to Oracle though I have around 40 GB space available. This is because I alreay have 4 primary partitions (one for /boot others for "data" and one extended partition). So I have to make primary partition out of free space and install Oracle in a single partition without following recommended partition layout scheme.
Now I want to do the installation of both the OS from the scratch and really need an advice on partition layout scheme. Here is summary of what I wan to achieve:
1. Keep the "data" partition (primary) intact and carve an ideal partition layout for both the OS with separate /boot, /tmp, /home, swap (and may be for /usr???). Also may be I can share swap?
2. How do I go about using LVM and is it recommended for this case? What would be ideal locations for each partitions and sizes? I already used 100 GB for "data" so now I want to keep 60 GB for Oracle Linux (and Oracle DB for which I will again make few sub-partitions) and remaining will be for Kubuntu.
Well, I am not sure if this is the right place to ask these questions but since I can see very knowlegeable top contributors here that are willing to help novice users I thought of posting these questions.
I would really really appreciate if someone can provide me rough draft of partition scheme in my case considering the sub-partitions needed for Oracle DB. I went thorugh number of forums and documentations to come up with solutuion and finally thought of getting help after much confusion.
I really need to carefully plan this time because it's third time I am doing reinstallation from the scratch because of poor plan I followed previously.
Thank you very much in advance and please let me know in case more information is needed from my side.
Regards,
RameshI accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?Google will be your best friend for such a question, for instance, "Creating a Custom centos Linux bootable ISO Image". There is no need to duplicate the effort. I recommend you download the correct installation DVD, e.g. 5.8
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.So you don't need to install 5.2 anymore, but you want the information how to compile a installation DVD from the 5.2 source anyway?!
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.Questions may be important for you, but not necessarily for others. No one will complain if you create a new thread for particular questions or subjects. It is better to separate your topics and questions rather than creating a multi-mega thread, which does little to help anyone else but you. It means more work on your end, but it will be easier for anyone to participate or answer your questions, and it will allow you to better award answers.
Regarding your partitioning questions: It is generally difficult to address such topics in a forum. You are asking for a book of information. My advice is to drop the old fashioned concepts of dual or triple boot options and install Oracle VirtualBox instead. It will make all of these questions obsolete and you can use whatever defaults when installing your virtual machine guest OS. Its a far more superior way of dealing with multiple operating systems on one and the same computer.
I am using Ubuntu 11.10 Desktop.
I need to urgently install Oracle 11gR2 on it.For what it's worth, if you can combine the two source below you should be able to install and run 11gR2 on Ubuntu 11.10.
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
However, check out VirtualBox. -
Hello!
I have Primary, two Physical Standby and one Logical Standby Servers.
$ uname -a
Linux host 2.6.39-200.32.1.el6uek.x86_64 #1 SMP Wed Sep 26 23:11:38 PDT 2012 x86_64 x86_64 x86_64 GNU/Linux
$ cat /etc/issue
Oracle Linux Server release 6.3
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> select * from dba_registry;
COMP_ID COMP_NAME VERSION STATUS MODIFIED NAMESPACE CONTROL SCHEMA PROCEDURE STARTUP PARENT_ID OTHER_SCHEMAS
CATALOG Oracle Database Catalog Views 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATALOG
CATPROC Oracle Database Packages and Types 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATPROC APPQOSSYS,DBSNMP,DIP,ORACLE_OCM,OUTLN,SYSTEM
OWM Oracle Workspace Manager 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS WMSYS VALIDATE_OWM
XDB Oracle XML Database 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS XDB DBMS_REGXDB.VALIDATEXDB
DGMGRL> connect sys/password
Connected.
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical1 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
$ rpm -qa
kernel-2.6.32-279.5.2.el6.x86_64
system-config-firewall-tui-1.2.27-5.el6.noarch
poppler-data-0.4.0-1.el6.noarch
mesa-dri-drivers-7.11-5.el6.x86_64
ghostscript-fonts-5.50-23.1.el6.noarch
libxml2-python-2.7.6-8.0.1.el6_3.3.x86_64
PyGreSQL-3.8.1-2.el6.x86_64
perl-Time-HiRes-1.9721-127.el6.x86_64
glibc-2.12-1.80.el6_3.5.i686
kernel-2.6.32-279.9.1.el6.x86_64
biosdevname-0.3.11-1.el6.x86_64
device-mapper-1.02.74-10.el6.x86_64
strace-4.5.19-1.11.el6_3.2.x86_64
aic94xx-firmware-30-2.el6.noarch
cpuspeed-1.5-15.el6.x86_64
matahari-network-0.6.0-14.el6.x86_64
rhino-1.7-0.7.r2.2.el6.noarch
elinks-0.12-0.20.pre5.el6.x86_64
libICE-1.0.6-1.el6.x86_64
lvm2-libs-2.02.95-10.el6.x86_64
perl-Crypt-SSLeay-0.57-16.el6.x86_64
libtar-1.2.11-17.el6.x86_64
perl-XML-Twig-3.34-1.el6.noarch
libidn-1.18-2.el6.x86_64
libreport-plugin-logger-2.0.9-5.0.1.el6.x86_64
crda-1.1.1_2010.11.22-1.el6.x86_64
lua-5.1.4-4.1.el6.x86_64
gnutls-2.8.5-4.el6_2.2.x86_64
yp-tools-2.9-12.el6.x86_64
attr-2.4.44-7.el6.x86_64
libtirpc-0.2.1-5.el6.x86_64
file-5.04-13.el6.x86_64
pax-3.4-10.1.el6.x86_64
zip-3.0-1.el6.x86_64
dash-0.5.5.1-3.1.el6.x86_64
latrace-0.5.9-2.el6.x86_64
kexec-tools-2.0.3-3.0.1.el6.x86_64
libasyncns-0.8-1.1.el6.x86_64
libertas-usb8388-firmware-5.110.22.p23-3.1.el6.noarch
nss-softokn-3.12.9-11.el6.x86_64
dbus-python-0.83.0-6.1.el6.x86_64
ql2200-firmware-2.02.08-3.1.el6.noarch
avahi-libs-0.6.25-11.el6.x86_64
nfs-utils-lib-1.1.5-4.el6.x86_64
redhat-indexhtml-6-1.0.2.el6.noarch
boost-regex-1.41.0-11.0.1.el6_1.2.x86_64
rpm-python-4.8.0-27.el6.x86_64
slang-2.2.1-1.el6.x86_64
perl-core-5.10.1-127.el6.x86_64
libselinux-2.0.94-5.3.el6.x86_64
iptables-ipv6-1.4.7-5.1.el6_2.x86_64
audit-libs-2.2-2.el6.x86_64
tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64
keyutils-libs-1.4-4.el6.x86_64
crash-6.0.4-2.el6.x86_64
python-setuptools-0.6.10-3.el6.noarch
perl-libs-5.10.1-127.el6.x86_64
lsof-4.82-4.el6.x86_64
perl-Module-Load-Conditional-0.30-127.el6.x86_64
libusb1-1.0.9-0.5.rc1.el6.x86_64
libunistring-0.9.3-5.el6.x86_64
rsync-3.0.6-9.el6.x86_64
libXi-1.3-3.el6.x86_64
perl-IO-Zlib-1.09-127.el6.x86_64
perl-HTML-Tagset-3.20-4.el6.noarch
libXt-1.0.7-1.el6.x86_64
perl-devel-5.10.1-127.el6.x86_64
boost-wave-1.41.0-11.0.1.el6_1.2.x86_64
scli-1.7.3-50.x86_64
libthai-0.1.12-3.el6.x86_64
perl-Compress-Raw-Bzip2-2.020-127.el6.x86_64
mpfr-2.4.1-6.el6.x86_64
foomatic-db-ppds-4.0-7.20091126.el6.noarch
eggdbus-0.6-3.el6.x86_64
libXxf86misc-1.0.2-1.el6.x86_64
libvisual-0.4.0-9.1.el6.x86_64
mysql-libs-5.1.61-4.el6.x86_64
libnih-1.0.1-7.el6.x86_64
oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
hal-0.5.14-11.el6.x86_64
libgcrypt-1.4.5-9.el6_2.2.x86_64
boost-test-1.41.0-11.0.1.el6_1.2.x86_64
glibc-common-2.12-1.80.el6_3.5.x86_64
mysql-5.1.61-4.el6.x86_64
ncurses-5.7-3.20090208.el6.x86_64
python-qpid-0.14-11.el6_3.noarch
qpid-qmf-0.14-14.0.1.el6_3.x86_64
matahari-lib-0.6.0-14.el6.x86_64
oracle-logos-60.0.11-9.el6.noarch
perl-Module-Build-0.3500-127.el6.x86_64
libhugetlbfs-utils-2.12-2.el6.x86_64
fontpackages-filesystem-1.41-1.1.el6.noarch
perl-Parse-CPAN-Meta-1.40-127.el6.x86_64
openswan-2.6.32-19.el6_3.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64
e2fsprogs-libs-1.41.12-12.el6.x86_64
dracut-004-284.0.1.el6_3.1.noarch
ConsoleKit-libs-0.4.1-3.el6.x86_64
udev-147-2.42.el6.x86_64
bind-utils-9.8.2-0.10.rc1.el6_3.4.x86_64
iwl5150-firmware-8.24.2.2-1.el6.noarch
unixODBC-devel-2.2.14-11.el6.x86_64
quota-3.17-16.el6.x86_64
xdg-utils-1.0.2-17.20091016cvs.el6.noarch
matahari-broker-0.6.0-14.el6.x86_64
mingetty-1.08-5.el6.x86_64
samba-common-3.5.10-125.el6.x86_64
usermode-1.102-3.el6.x86_64
abrt-addon-ccpp-2.0.8-6.0.1.el6.x86_64
perl-XML-Dumper-0.81-6.el6.noarch
libdhash-0.4.2-9.el6.x86_64
crontabs-1.10-33.el6.noarch
libevent-1.4.13-4.el6.x86_64
mtr-0.75-5.el6.x86_64
atk-1.28.0-2.el6.x86_64
sgpio-1.2.0.10-5.el6.x86_64
rdate-1.4-16.el6.x86_64
boost-system-1.41.0-11.0.1.el6_1.2.x86_64
latencytop-common-0.5-9.el6.x86_64
libsemanage-2.0.43-4.1.el6.x86_64
libtopology-0.3-7.el6.x86_64
libtheora-1.1.0-2.el6.x86_64
atmel-firmware-1.3-7.el6.noarch
cryptsetup-luks-1.2.0-7.el6.x86_64
python-dmidecode-3.10.13-1.el6.x86_64
ipw2200-firmware-3.1-4.el6.noarch
m4-1.4.13-5.el6.x86_64
bfa-firmware-3.0.2.2-1.el6.noarch
python-iwlib-0.1-1.2.el6.x86_64
libedit-2.11-4.20080712cvs.1.el6.x86_64
smartmontools-5.42-2.el6.x86_64
numpy-1.4.1-9.el6.x86_64
libcom_err-1.41.12-12.el6.x86_64
nmap-5.51-2.0.1.el6.x86_64
python-paramiko-1.7.5-2.1.el6.noarch
grep-2.6.3-3.el6.x86_64
tcsh-6.17-19.el6_2.x86_64
db4-4.7.25-17.el6.x86_64
db4-utils-4.7.25-17.el6.x86_64
perl-Params-Check-0.26-127.el6.x86_64
make-3.81-20.el6.x86_64
expat-2.0.1-11.el6_2.x86_64
SDL-1.2.14-3.el6.x86_64
libXext-1.1-3.el6.x86_64
freetype-2.3.11-6.el6_2.9.x86_64
xorg-x11-drv-ati-firmware-6.14.2-9.el6.noarch
libXft-2.1.13-4.1.el6.x86_64
perl-Term-UI-0.20-127.el6.x86_64
perl-XML-Parser-2.36-7.el6.x86_64
libXxf86vm-1.1.0-1.el6.x86_64
perl-Archive-Extract-0.38-127.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
device-mapper-multipath-libs-0.4.9-56.el6_3.1.x86_64
libss-1.41.12-12.el6.x86_64
cloog-ppl-0.15.7-1.2.el6.x86_64
libfprint-0.1.0-19.pre2.el6.x86_64
module-init-tools-3.9-20.0.1.el6.x86_64
desktop-file-utils-0.15-9.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
kbd-1.15-11.el6.x86_64
augeas-libs-0.9.0-4.el6.x86_64
time-1.7-37.1.el6.x86_64
logwatch-7.3.6-49.el6.noarch
plymouth-0.8.3-24.0.1.el6.x86_64
btparser-0.16-3.el6.x86_64
libhugetlbfs-2.12-2.el6.x86_64
python-2.6.6-29.el6_3.3.x86_64
ipa-python-2.2.0-16.el6.x86_64
dbus-1.2.24-7.0.1.el6_3.x86_64
nss-3.13.5-1.0.1.el6_3.x86_64
glibc-headers-2.12-1.80.el6_3.5.x86_64
kernel-uek-2.6.39-200.29.3.el6uek.x86_64
libuser-0.56.13-5.el6.x86_64
foomatic-db-filesystem-4.0-7.20091126.el6.noarch
qpid-tools-0.14-6.el6_3.noarch
perl-ExtUtils-Embed-1.28-127.el6.x86_64
perl-DBD-MySQL-4.013-3.el6.x86_64
iso-codes-3.16-2.el6.noarch
postgresql-server-8.4.13-1.el6_3.x86_64
mesa-libGLU-7.11-5.el6.x86_64
dstat-0.7.0-1.el6.noarch
poppler-utils-0.12.4-3.el6_0.1.x86_64
libX11-common-1.3-2.el6.noarch
fipscheck-lib-1.2.0-7.el6.x86_64
java-1.6.0-openjdk-1.6.0.0-1.49.1.11.4.el6_3.x86_64
pam_krb5-2.3.11-9.el6.x86_64
libcap-2.16-5.5.el6.x86_64
kernel-uek-2.6.39-200.31.1.el6uek.x86_64
polkit-0.96-2.el6_0.1.x86_64
kernel-uek-firmware-2.6.39-200.32.1.el6uek.noarch
setuptool-1.19.9-3.el6.x86_64
popt-1.13-7.el6.x86_64
kernel-uek-2.6.39-200.32.1.el6uek.x86_64
kernel-devel-2.6.32-279.9.1.el6.x86_64
b43-openfwwf-5.2-4.el6.noarch
libacl-2.2.49-6.el6.x86_64
telnet-0.17-47.el6_3.1.x86_64
iwl1000-firmware-39.31.5.1-1.el6.noarch
yum-plugin-security-1.1.30-14.0.1.el6.noarch
readahead-1.5.6-1.el6.x86_64
libldb-0.9.10-23.el6.x86_64
libsepol-2.0.41-4.el6.x86_64
hicolor-icon-theme-0.11-1.1.el6.noarch
shadow-utils-4.1.4.2-13.el6.x86_64
prelink-0.4.6-3.el6.x86_64
ethtool-2.6.33-0.3.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
postgresql-odbc-08.04.0200-1.el6.x86_64
iputils-20071127-16.el6.x86_64
sqlite-3.6.20-1.el6.x86_64
mysql-connector-odbc-5.1.5r1144-7.el6.x86_64
findutils-4.4.2-6.el6.x86_64
libcap-ng-0.6.4-3.el6_0.1.x86_64
cyrus-sasl-2.1.23-13.el6.x86_64
ntpdate-4.2.4p8-2.el6.x86_64
nc-1.84-22.el6.x86_64
cronie-anacron-1.4.4-7.el6.x86_64
plymouth-core-libs-0.8.3-24.0.1.el6.x86_64
setserial-2.17-25.el6.x86_64
rfkill-0.3-4.el6.x86_64
lcms-libs-1.19-1.el6.x86_64
ql2100-firmware-1.19.38-3.1.el6.noarch
cyrus-sasl-gssapi-2.1.23-13.el6.x86_64
newt-python-0.52.11-3.el6.x86_64
rt61pci-firmware-1.2-7.el6.noarch
python-iniparse-0.3.1-2.1.el6.noarch
acl-2.2.49-6.el6.x86_64
ipw2100-firmware-1.3-11.el6.noarch
blktrace-1.0.1-6.el6.x86_64
diffutils-2.8.1-28.el6.x86_64
man-pages-3.22-17.el6.noarch
system-config-firewall-base-1.2.27-5.el6.noarch
boost-date-time-1.41.0-11.0.1.el6_1.2.x86_64
yum-metadata-parser-1.1.2-16.el6.x86_64
rpm-libs-4.8.0-27.el6.x86_64
python-nss-0.11-3.el6.x86_64
unixODBC-2.2.14-11.el6.x86_64
libgcc-4.4.6-4.el6.x86_64
gdbm-1.8.0-36.el6.x86_64
libstdc++-4.4.6-4.el6.x86_64
python-dateutil-1.4.1-6.el6.noarch
pcre-7.8-4.el6.x86_64
python-pycurl-7.19.0-8.el6.x86_64
xmlrpc-c-1.16.24-1209.1840.el6.x86_64
python-gudev-147.1-4.el6_0.1.x86_64
libblkid-2.17.2-12.7.el6.x86_64
perl-version-0.77-127.el6.x86_64
perl-Locale-Maketext-Simple-0.18-127.el6.x86_64
perl-IO-Compress-Base-2.020-127.el6.x86_64
abrt-libs-2.0.8-6.0.1.el6.x86_64
perl-Compress-Raw-Zlib-2.020-127.el6.x86_64
libXau-1.0.5-1.el6.x86_64
perl-DBIx-Simple-1.32-3.el6.noarch
binutils-2.20.51.0.2-5.34.el6.x86_64
libXrender-0.9.5-1.el6.x86_64
perl-IO-Compress-Zlib-2.020-127.el6.x86_64
libXcursor-1.1.10-2.el6.x86_64
perl-Log-Message-Simple-0.04-127.el6.x86_64
libXinerama-1.1-1.el6.x86_64
perl-libwww-perl-5.833-2.el6.noarch
libstdc++-devel-4.4.6-4.el6.x86_64
perl-Test-Harness-3.17-127.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
libstdc++-4.4.6-4.el6.i686
perl-IPC-Cmd-0.56-127.el6.x86_64
libXv-1.0.5-1.el6.x86_64
elfutils-0.152-1.el6.x86_64
ncurses-static-5.7-3.20090208.el6.x86_64
perl-Module-Loaded-0.02-127.el6.x86_64
gstreamer-tools-0.10.29-1.0.1.el6.x86_64
device-mapper-multipath-0.4.9-56.el6_3.1.x86_64
keyutils-1.4-4.el6.x86_64
iw-0.9.17-4.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
coreutils-8.4-19.el6.x86_64
foomatic-4.0.4-1.el6_1.1.x86_64
gcc-4.4.6-4.el6.x86_64
MAKEDEV-3.24-6.el6.x86_64
libdmx-1.1.0-1.el6.x86_64
authconfig-6.1.12-10.el6.x86_64
ksh-20100621-16.el6.x86_64
tar-1.23-7.el6.x86_64
pm-utils-1.2.5-9.el6.x86_64
ed-1.1-3.3.el6.x86_64
iptables-1.4.7-5.1.el6_2.x86_64
hunspell-1.2.8-16.el6.x86_64
nmon-14g-1.el6.rf.x86_64
jasper-libs-1.900.1-15.el6_1.1.x86_64
initscripts-9.03.31-2.0.1.el6_3.1.x86_64
rhn-client-tools-1.0.0-87.0.2.el6.noarch
qpid-cpp-client-0.14-22.0.1.el6_3.x86_64
libipa_hbac-python-1.8.0-32.el6.x86_64
redhat-lsb-graphics-4.0-3.0.1.el6.x86_64
less-436-10.el6.x86_64
postgresql-8.4.13-1.el6_3.x86_64
cracklib-dicts-2.8.16-4.el6.x86_64
logrotate-3.7.8-15.el6.x86_64
fontconfig-2.8.0-3.el6.x86_64
qpid-cpp-server-0.14-22.0.1.el6_3.x86_64
openldap-2.4.23-26.el6_3.2.x86_64
kernel-uek-firmware-2.6.39-200.29.3.el6uek.noarch
perl-CPANPLUS-0.88-127.el6.x86_64
upstart-0.6.5-12.el6.x86_64
saslwrapper-0.14-1.el6.x86_64
net-tools-1.60-110.el6_2.x86_64
device-mapper-event-libs-1.02.74-10.el6.x86_64
openssh-5.3p1-81.el6.x86_64
matahari-consoles-0.6.0-14.el6.x86_64
matahari-python-0.6.0-14.el6.x86_64
dmraid-events-1.0.0.rc16-11.el6.x86_64
tuned-0.2.19-7.el6.noarch
certmonger-0.56-1.el6.x86_64
libreport-plugin-reportuploader-2.0.9-5.0.1.el6.x86_64
abrt-addon-python-2.0.8-6.0.1.el6.x86_64
libreport-plugin-kerneloops-2.0.9-5.0.1.el6.x86_64
libpath_utils-0.2.1-9.el6.x86_64
gtk2-2.18.9-10.el6.x86_64
vim-common-7.2.411-1.8.el6.x86_64
setup-2.8.14-16.el6.noarch
latencytop-0.5-9.el6.x86_64
autofs-5.0.5-54.el6.x86_64
ipa-client-2.2.0-16.el6.x86_64
abrt-cli-2.0.8-6.0.1.el6.x86_64
lvm2-2.02.95-10.el6.x86_64
openssh-clients-5.3p1-81.el6.x86_64
microcode_ctl-1.17-11.el6.x86_64
libcgroup-0.37-4.el6.x86_64
e2fsprogs-1.41.12-12.el6.x86_64
python-psycopg2-2.0.14-1.el6_2.1.x86_64
rhn-setup-1.0.0-87.0.2.el6.noarch
sos-2.2-29.0.1.el6.noarch
psacct-6.3.2-63.el6_3.3.x86_64
cifs-utils-4.8.1-10.el6.x86_64
perl-CGI-3.51-127.el6.x86_64
libicu-4.2.1-9.1.el6_2.x86_64
mcelog-1.0pre3_20110718-0.14.el6.x86_64
ltrace-0.5-23.45svn.el6.x86_64
efibootmgr-0.5.4-10.el6.x86_64
libvorbis-1.2.3-4.el6_2.1.x86_64
ql2500-firmware-5.06.05-1.el6.noarch
curl-7.19.7-26.el6_2.4.x86_64
selinux-policy-targeted-3.7.19-155.0.1.el6_3.4.noarch
jpackage-utils-1.7.5-3.12.el6.noarch
perl-IO-Compress-Bzip2-2.020-127.el6.x86_64
filesystem-2.4.30-3.el6.x86_64
qpid-cpp-server-ssl-0.14-22.0.1.el6_3.x86_64
pciutils-3.1.4-11.el6.x86_64
xml-common-0.6.3-32.el6.noarch
ghostscript-8.70-14.el6_3.1.x86_64
urw-fonts-2.4-10.el6.noarch
iotop-0.3.2-3.el6.noarch
mailcap-2.1.31-2.el6.noarch
libxslt-1.1.26-2.0.2.el6_3.1.x86_64
wget-1.12-1.4.el6.x86_64
nss-softokn-freebl-3.12.9-11.el6.x86_64
openjpeg-libs-1.3-9.el6_3.x86_64
fipscheck-1.2.0-7.el6.x86_64
libattr-2.4.44-7.el6.x86_64
kernel-uek-firmware-2.6.39-200.31.1.el6uek.noarch
info-4.13a-8.el6.x86_64
bind-libs-9.8.2-0.10.rc1.el6_3.4.x86_64
ConsoleKit-0.4.1-3.el6.x86_64
systemtap-runtime-1.7-5.0.1.el6_3.1.x86_64
iwl6000g2b-firmware-17.168.5.2-1.el6.noarch
kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64
iwl6050-firmware-41.28.5.1-2.el6.noarch
perf-2.6.32-279.9.1.el6.x86_64
gnupg2-2.0.14-4.el6.x86_64
iwl6000-firmware-9.221.4.1-1.el6.noarch
yum-utils-1.1.30-14.0.1.el6.noarch
bzip2-libs-1.0.5-7.el6_0.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
gamin-0.1.10-9.el6.x86_64
jline-0.9.94-0.8.el6.noarch
virt-what-1.11-1.1.el6.x86_64
dbus-glib-0.86-5.el6.x86_64
libSM-1.1.0-7.1.el6.x86_64
sigar-1.6.5-0.4.git58097d9.el6.x86_64
pam_passwdqc-1.0.5-6.el6.x86_64
hunspell-en-0.20090216-7.1.el6.noarch
libogg-1.1.4-2.1.el6.x86_64
postfix-2.6.6-2.2.el6_1.x86_64
libgpg-error-1.7-4.el6.x86_64
libtdb-1.2.1-3.el6.x86_64
ntp-4.2.4p8-2.el6.x86_64
mlocate-0.22.2-3.el6.x86_64
cronie-1.4.4-7.el6.x86_64
cyrus-sasl-plain-2.1.23-13.el6.x86_64
pkgconfig-0.23-9.1.el6.x86_64
oddjob-0.30-5.el6.x86_64
libtevent-0.9.8-8.el6.x86_64
hdparm-9.16-3.4.el6.x86_64
traceroute-2.0.14-2.el6.x86_64
gpm-libs-1.20.6-12.el6.x86_64
dosfstools-3.0.9-4.el6.x86_64
eject-2.1.5-17.el6.x86_64
sysvinit-tools-2.87-4.dsf.el6.x86_64
iwl5000-firmware-8.83.5.1_1-1.el6_1.1.noarch
elfutils-libs-0.152-1.el6.x86_64
iwl4965-firmware-228.61.2.24-2.1.el6.noarch
pyOpenSSL-0.10-2.el6.x86_64
rt73usb-firmware-1.8-7.el6.noarch
boost-thread-1.41.0-11.0.1.el6_1.2.x86_64
python-ldap-2.3.10-1.el6.x86_64
gpg-pubkey-ec551f03-4c2d256a
libfontenc-1.0.5-2.el6.x86_64
pygpgme-0.1-18.20090824bzr68.el6.x86_64
libtool-ltdl-2.2.6-15.5.el6.x86_64
python-lxml-2.2.3-1.1.el6.x86_64
mc-4.7.0.2-3.el6.x86_64
newt-0.52.11-3.el6.x86_64
glib2-2.22.5-7.el6.x86_64
nss-util-3.13.5-1.el6_3.x86_64
pytz-2010h-2.el6.noarch
python-urlgrabber-3.9.1-8.el6.noarch
readline-6.0-4.el6.x86_64
perl-Module-Pluggable-3.90-127.el6.x86_64
boost-python-1.41.0-11.0.1.el6_1.2.x86_64
perl-5.10.1-127.el6.x86_64
libpng-1.2.49-1.el6_2.x86_64
perl-URI-1.40-2.el6.noarch
perl-Log-Message-0.02-127.el6.x86_64
perl-Package-Constants-0.02-127.el6.x86_64
libxcb-1.5-1.el6.x86_64
cpio-2.10-10.el6.x86_64
cairo-1.8.8-3.1.el6.x86_64
libipa_hbac-1.8.0-32.el6.x86_64
libXtst-1.0.99.2-3.el6.x86_64
perl-Archive-Tar-1.58-127.el6.x86_64
perl-HTML-Parser-3.64-2.el6.x86_64
libXdamage-1.1.2-1.el6.x86_64
perl-Module-CoreList-2.18-127.el6.x86_64
libgcc-4.4.6-4.el6.i686
libXfont-1.4.1-2.el6_1.x86_64
libXcomposite-0.4.1-2.el6.x86_64
perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64
giflib-4.1.6-3.1.el6.x86_64
perl-ExtUtils-CBuilder-0.27-127.el6.x86_64
ncurses-term-5.7-3.20090208.el6.x86_64
tmpwatch-2.9.16-4.el6.x86_64
grubby-7.0.15-3.0.1.el6.x86_64
oracleasm-support-2.1.5-1.el6.x86_64
coreutils-libs-8.4-19.el6.x86_64
cpp-4.4.6-4.el6.x86_64
hal-libs-0.5.14-11.el6.x86_64
redhat-lsb-printing-4.0-3.0.1.el6.x86_64
gcc-c++-4.4.6-4.el6.x86_64
libutempter-1.1.5-4.1.el6.x86_64
liboil-0.3.16-4.1.el6.x86_64
hwdata-0.233-7.8.el6.noarch
libaio-devel-0.3.107-10.el6.x86_64
boost-iostreams-1.41.0-11.0.1.el6_1.2.x86_64
libssh2-1.2.2-11.el6_3.x86_64
compat-libcap1-1.10-1.x86_64
hal-info-20090716-3.1.el6.noarch
vim-minimal-7.2.411-1.8.el6.x86_64
perl-YAML-Syck-1.07-4.el6.x86_64
libcollection-0.6.0-9.el6.x86_64
glibc-2.12-1.80.el6_3.5.x86_64
boost-serialization-1.41.0-11.0.1.el6_1.2.x86_64
oraclelinux-release-6Server-3.0.2.x86_64
openssl-1.0.0-25.el6_3.1.x86_64
dejavu-sans-fonts-2.30-2.el6.noarch
qt-sqlite-4.6.2-24.el6.x86_64
libxml2-2.7.6-8.0.1.el6_3.3.x86_64
groff-1.18.1.4-21.el6.x86_64
ql23xx-firmware-3.03.27-3.1.el6.noarch
cups-libs-1.4.2-48.el6_3.1.x86_64
cracklib-2.8.16-4.el6.x86_64
pcmciautils-015-4.2.el6.x86_64
man-1.6f-30.el6.x86_64
qpid-cpp-client-ssl-0.14-22.0.1.el6_3.x86_64
nss-tools-3.13.5-1.0.1.el6_3.x86_64
alsa-lib-1.0.22-3.el6.x86_64
hwloc-1.1-0.1.el6.x86_64
perl-Test-Simple-0.92-127.el6.x86_64
phonon-backend-gstreamer-4.6.2-24.el6.x86_64
perl-Time-Piece-1.15-127.el6.x86_64
fprintd-0.1-20.git04fd09cfa.el6.x86_64
python-saslwrapper-0.14-1.el6.x86_64
device-mapper-event-1.02.74-10.el6.x86_64
matahari-agent-lib-0.6.0-14.el6.x86_64
matahari-sysconfig-0.6.0-14.el6.x86_64
matahari-rpc-0.6.0-14.el6.x86_64
dmraid-1.0.0.rc16-11.el6.x86_64
matahari-host-0.6.0-14.el6.x86_64
portreserve-0.0.4-9.el6.x86_64
libreport-2.0.9-5.0.1.el6.x86_64
libreport-plugin-mailx-2.0.9-5.0.1.el6.x86_64
abrt-addon-kerneloops-2.0.8-6.0.1.el6.x86_64
libtasn1-2.3-3.el6_2.1.x86_64
libref_array-0.1.1-9.el6.x86_64
file-libs-5.04-13.el6.x86_64
c-ares-1.7.0-6.el6.x86_64
rpcbind-0.2.0-9.el6.x86_64
busybox-1.15.1-15.el6.x86_64
dhclient-4.1.1-31.P1.0.1.el6_3.1.x86_64
vim-enhanced-7.2.411-1.8.el6.x86_64
samba-client-3.5.10-125.el6.x86_64
openssh-server-5.3p1-81.el6.x86_64
rsyslog-5.8.10-2.el6.x86_64
rng-tools-2-13.el6_2.x86_64
fprintd-pam-0.1-20.git04fd09cfa.el6.x86_64
sudo-1.7.4p5-13.el6_3.x86_64
rhn-check-1.0.0-87.0.2.el6.noarch
m2crypto-0.20.2-9.el6.x86_64
gdb-7.2-56.el6.x86_64
audit-2.2-2.el6.x86_64
oprofile-0.9.7-1.el6.x86_64
valgrind-3.6.0-5.el6.x86_64
irqbalance-0.55-35.0.1.el6_3.x86_64
alsa-utils-1.0.22-3.el6.x86_64
dmidecode-2.11-2.el6_1.x86_64
libgomp-4.4.6-4.el6.x86_64
oraclelinux-release-notes-6Server-7.x86_64
xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64
selinux-policy-3.7.19-155.0.1.el6_3.4.noarch
cas-0.15-1.el6.1.noarch
ca-certificates-2010.63-3.el6_1.5.noarch
perl-CPAN-1.9402-127.el6.x86_64
libsndfile-1.0.20-5.el6.x86_64
cups-1.4.2-48.el6_3.1.x86_64
MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
dejavu-fonts-common-2.30-2.el6.noarch
qt-x11-4.6.2-24.el6.x86_64
krb5-workstation-1.9-33.el6_3.3.x86_64
pulseaudio-libs-0.9.21-14.el6_3.x86_64
dracut-kernel-004-284.0.1.el6_3.1.noarch
util-linux-ng-2.17.2-12.7.el6.x86_64
tzdata-java-2012f-1.el6.noarch
iwl100-firmware-39.31.5.1-1.el6.noarch
kpartx-0.4.9-56.el6_3.1.x86_64
mailx-12.4-6.el6.x86_64
yum-3.2.29-40.0.1.el6.noarch
acpid-1.0.10-2.1.el6.x86_64
cyrus-sasl-lib-2.1.23-13.el6.x86_64
hesiod-3.1.0-19.el6.x86_64
usbutils-003-4.el6.x86_64
tcp_wrappers-libs-7.6-57.el6.x86_64
mdadm-3.2.3-9.el6.x86_64
xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
abrt-2.0.8-6.0.1.el6.x86_64
libnl-1.1-14.el6.x86_64
abrt-tui-2.0.8-6.0.1.el6.x86_64
unzip-6.0-1.el6.x86_64
pciutils-libs-3.1.4-11.el6.x86_64
libini_config-0.6.1-9.el6.x86_64
powertop-1.11-6.el6.x86_64
psmisc-22.6-15.el6_0.1.x86_64
sssd-1.8.0-32.el6.x86_64
pixman-0.18.4-1.el6_0.1.x86_64
bridge-utils-1.2-9.el6.x86_64
boost-filesystem-1.41.0-11.0.1.el6_1.2.x86_64
dhcp-common-4.1.1-31.P1.0.1.el6_3.1.x86_64
ustr-1.0.4-9.1.el6.x86_64
xz-4.999.9-0.3.beta.20091007git.el6.x86_64
nfs-utils-1.2.3-26.el6.x86_64
zd1211-firmware-1.4-4.el6.noarch
checkpolicy-2.0.22-1.el6.x86_64
matahari-0.6.0-14.el6.x86_64
rhnlib-2.5.22-12.0.2.el6.noarch
rootfiles-8.1-6.1.el6.noarch
libusb-0.1.12-23.el6.x86_64
parted-2.1-18.el6.x86_64
gettext-0.17-16.el6.x86_64
pth-2.0.7-9.3.el6.x86_64
system-config-network-tui-1.6.0.el6.2-1.0.3.el6.noarch
python-netaddr-0.7.5-4.el6.noarch
bash-4.1.2-9.el6_2.x86_64
man-pages-overrides-6.3.3-1.el6.noarch
nspr-4.9.1-2.el6_3.x86_64
grub-0.97-77.0.1.el6.x86_64
python-crypto-2.0.1-22.el6.x86_64
sed-4.2.1-10.el6.x86_64
sysstat-9.0.4-20.el6.x86_64
rhnsd-4.9.3-2.0.1.el6.x86_64
perl-Pod-Escapes-1.04-127.el6.x86_64
numactl-2.0.7-3.el6.x86_64
boost-1.41.0-11.0.1.el6_1.2.x86_64
libudev-147-2.42.el6.x86_64
crash-trace-command-1.0-4.el6.x86_64
libX11-1.3-2.el6.x86_64
matahari-core-0.6.0-14.el6.x86_64
ql2400-firmware-5.06.05-1.el6.noarch
libXrandr-1.3.0-4.el6.x86_64
perl-Object-Accessor-0.34-127.el6.x86_64
perl-libxml-perl-0.08-10.el6.noarch
nss-softokn-freebl-3.12.9-11.el6.i686
pycairo-1.8.6-2.1.el6.x86_64
perl-File-Fetch-0.26-127.el6.x86_64
ncurses-libs-5.7-3.20090208.el6.i686
gmp-4.3.1-7.el6_2.2.x86_64
flac-1.2.1-6.1.el6.x86_64
ppl-0.10.2-11.el6.x86_64
python-matplotlib-0.99.1.2-1.el6.x86_64
qt-4.6.2-24.el6.x86_64
patch-2.6-6.el6.x86_64
libXxf86dga-1.1.1-1.el6.x86_64
kbd-misc-1.15-11.el6.noarch
procps-3.2.8-23.el6.x86_64
perl-Date-Manip-6.24-1.el6.noarch
libdrm-2.4.25-2.el6.x86_64
libgfortran-4.4.6-4.el6.x86_64
python-libs-2.6.6-29.el6_3.3.x86_64
python-krbV-1.0.90-3.el6.x86_64
gzip-1.3.12-18.el6.x86_64
dbus-libs-1.2.24-7.0.1.el6_3.x86_64
nss-sysinit-3.13.5-1.0.1.el6_3.x86_64
samba-winbind-clients-3.5.10-125.el6.x86_64
glibc-devel-2.12-1.80.el6_3.5.x86_64
plymouth-scripts-0.8.3-24.0.1.el6.x86_64
basesystem-10.0-4.0.1.el6.noarch
mesa-libGL-7.11-5.el6.x86_64
postgresql-docs-8.4.13-1.el6_3.x86_64
poppler-0.12.4-3.el6_0.1.x86_64
ncurses-base-5.7-3.20090208.el6.x86_64
perl-parent-0.221-127.el6.x86_64
kernel-devel-2.6.32-279.5.2.el6.x86_64
oddjob-mkhomedir-0.30-5.el6.x86_64
zlib-1.2.3-27.el6.x86_64
libselinux-utils-2.0.94-5.3.el6.x86_64
kernel-firmware-2.6.32-279.9.1.el6.noarch
device-mapper-libs-1.02.74-10.el6.x86_64
tzdata-2012f-1.el6.noarch
iwl6000g2a-firmware-17.168.5.3-1.el6.noarch
libjpeg-6b-46.el6.x86_64
policycoreutils-2.0.83-19.24.0.1.el6.x86_64
yum-rhn-plugin-0.9.1-43.0.1.el6.noarch
gpgme-1.1.8-3.el6.x86_64
matahari-service-0.6.0-14.el6.x86_64
libaio-0.3.107-10.el6.x86_64
pinfo-0.6.9-12.el6.x86_64
libtalloc-2.0.1-1.1.el6.x86_64
cryptsetup-luks-libs-1.2.0-7.el6.x86_64
boost-program-options-1.41.0-11.0.1.el6_1.2.x86_64
libreport-python-2.0.9-5.0.1.el6.x86_64
perl-XML-Grove-0.46alpha-40.el6.noarch
which-2.19-6.el6.x86_64
libreport-cli-2.0.9-5.0.1.el6.x86_64
wireless-tools-29-5.1.1.el6.x86_64
bzip2-1.0.5-7.el6_0.x86_64
ypbind-1.20.4-29.el6.x86_64
nano-2.0.9-7.el6.x86_64
libgssglue-0.1-11.el6.x86_64
vconfig-1.9-8.1.el6.x86_64
kernel-2.6.32-279.5.1.el6.x86_64
b43-fwcutter-012-2.2.el6.x86_64
libmng-1.0.10-4.1.el6.x86_64
libffi-3.0.5-3.2.el6.x86_64
ivtv-firmware-20080701-20.2.noarch
python-ethtool-0.6-1.el6.x86_64
iwl3945-firmware-15.32.2.9-4.el6.noarch
bc-1.06.95-1.el6.x86_64
words-3.0-17.el6.noarch
mysql-server-5.1.61-4.el6.x86_64
python-kerberos-1.1-6.2.el6.x86_64
rpm-4.8.0-27.el6.x86_64
libpcap-1.0.0-6.20091201git117cb5.el6.x86_64
passwd-0.77-4.el6_2.2.x86_64
chkconfig-1.3.49.3-2.el6.x86_64
cvs-1.11.23-11.el6_2.1.x86_64
libuuid-2.17.2-12.7.el6.x86_64
perl-DBI-1.609-4.el6.x86_64
at-3.1.10-43.el6_2.1.x86_64
pygobject2-2.20.0-5.el6.x86_64
gawk-3.1.7-9.el6.x86_64
libgudev1-147-2.42.el6.x86_64
python-nose-0.10.4-3.1.el6.noarch
perl-Pod-Simple-3.13-127.el6.x86_64
ntsysv-1.3.49.3-2.el6.x86_64
perl-Module-Load-0.16-127.el6.x86_64
trace-cmd-1.0.5-7.el6.x86_64
theora-tools-1.1.0-2.el6.x86_64
libtiff-3.9.4-6.el6_3.x86_64
perl-DBD-SQLite-1.27-3.el6.x86_64
nfs4-acl-tools-0.3.3-6.el6.x86_64
libXfixes-4.0.4-1.el6.x86_64
perl-Compress-Zlib-2.020-127.el6.x86_64
kernel-devel-2.6.32-279.5.1.el6.x86_64
qt3-3.3.8b-30.el6.x86_64
perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64
boost-graph-1.41.0-11.0.1.el6_1.2.x86_64
ncurses-devel-5.7-3.20090208.el6.x86_64
pango-1.28.1-3.el6_0.5.x86_64
perl-Digest-SHA-5.47-127.el6.x86_64
gstreamer-0.10.29-1.0.1.el6.x86_64
libXmu-1.0.5-1.el6.x86_64
foomatic-db-4.0-7.20091126.el6.noarch
pam-1.1.1-10.el6_2.1.x86_64
tcp_wrappers-7.6-57.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
gstreamer-plugins-base-0.10.29-1.el6.x86_64
pinentry-0.7.6-6.el6.x86_64
elfutils-libelf-devel-0.152-1.el6.x86_64
iproute-2.6.32-20.el6.x86_64
boost-signals-1.41.0-11.0.1.el6_1.2.x86_64
krb5-libs-1.9-33.el6_3.3.x86_64
atlas-3.8.4-2.el6.x86_64
cdparanoia-libs-10.2-5.1.el6.x86_64
postgresql-libs-8.4.13-1.el6_3.x86_64
redhat-lsb-4.0-3.0.1.el6.x86_64
sssd-client-1.8.0-32.el6.x86_64
python-qpid-qmf-0.14-14.0.1.el6_3.x86_64
seekwatcher-0.12-5.el6.noarch
libcurl-7.19.7-26.el6_2.4.x86_64
I want to upgrade my OS from official repository on Primary and Standby Servers. And I have a question:
Will I have a problem with my RDBMS after upgrade OS (e.g. statuses in dba_registry will become INVALID)?It's Ok.
Now I have:
$ cat /etc/issue
Oracle Linux Server release 6.4
No any problem. -
Oracle Linux 6.3 in Win2012 R2 Hyperview
Hi,
I hope this is the right place for my question.
I'm trying to run Oracle Linux 6.3 in Windows Server 2012 R2 Hyperview V. As for Microsoft, this should run fine.
However "should" is a dangerous word.
On my system Linux can't access the networkcard, that seems to be a known issue.
I found an solution:
Step-By-Step: Installing Oracle Linux 6 U3 on Hyper-V 2012 with LIS 3.4 - Canadian IT Professionals - Site Home - TechNe…
However, this step make me feel uncomfortable:
# vi /etc/sysconfig/kernel,
(delete –uek from last of DEFUALT KERNEL..line)
As far as I know this diables the unbreakable "component" right?
Is there any way to get Oracle Linux to run under hyperview that is "proved by Oracle?"
Regards
ChristianMicrosoft probably does not want you to run anything other than Windows . I not sure if it helps, but I think I read that Oracle has made further progress with Hyper-V compatibiity and mentioned it in the release notes, but probably for versions later than 6.3.
You might want to check the following link that provides a list of what components shoud work with what version of Oracle Linux and UEK. It was apparently updated Dec 2014 and does not even mention 6.3 anymore:
https://technet.microsoft.com/en-us/library/dn609828.aspx -
Compiling VMtools on Oracle Linux 6.2 gives errors
I am trying to compile the vmtools on a Oracle Linux 6.2 VMware installation. I'm getting strange compilation errors on all the vmtools. Log pasted below.
I have found thread VMware Tools and Oracle Linux Howto and followed the items in there with no help and no change.
yum -y install kernel-headers is all up to date
yum -y install kernel-devel is all up to date
Here are the issues I see:
1. Compiling the shared folder says linux/smp_lock.h does not exist, and then fails with SPIN_LOCK_UNLOCKED undeclared and unknow field `get_sb'
2. The network device driver fails in vmxnet.c
3. The vmblock module fails in dentry.c
4. The communication service fails in vmci_drv.c
5. The VM communication interface fails in vmci_drv.c
6. The X configuration is skipped because there are "no drivers for X.ora version: 7.9.6" (see the bottom of the log below).
start of pasted log
========================================================
[root@vdev-oem bin]# ./vmware-config-tools.pl
Initializing...
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [ OK ]
Virtual Printing daemon: [ OK ]
Unmounting HGFS shares: [ OK ]
Guest filesystem driver: [ OK ]
The module vmmemctl has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmmemctl to override.
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/usr/bin/gcc".
The path "/usr/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers of the running kernel at
"/lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include".
The path "/lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include" appears to
be a valid path to the kernel headers of the running kernel.
Would you like to change it? [no]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dentry.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dir.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/file.o
/tmp/vmware-root/modules/vmhgfs-only/file.c:120: warning: initialization from incompatible pointer type
CC [M] /tmp/vmware-root/modules/vmhgfs-only/filesystem.o
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:48:28: error: linux/smp_lock.h: No such file or directory
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:72: error: âSPIN_LOCK_UNLOCKEDâ undeclared here (not in a function)
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:137: error: unknown field âget_sbâ specified in initializer
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:137: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c: In function âHgfsGetSbâ:
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:493: error: implicit declaration of function âget_sb_nodevâ
make[2]: *** [tmp/vmware-root/modules/vmhgfs-only/filesystem.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmhgfs.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmxnet-only/vmxnet.o
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c: In function âvmxnet_probe_deviceâ:
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: âvmxnet_change_mtuâ undeclared (first use in this function)
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: (Each undeclared identifier is reported only once
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: for each function it appears in.)
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c: In function âvmxnet_load_multicastâ:
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2915: error: âstruct net_deviceâ has no member named âmc_listâ
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2925: error: âstruct net_deviceâ has no member named âmc_countâ
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2926: error: dereferencing pointer to incomplete type
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2927: error: dereferencing pointer to incomplete type
make[2]: *** [tmp/vmware-root/modules/vmxnet-only/vmxnet.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmxnet-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmxnet.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/block.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/control.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dentry.o
/tmp/vmware-root/modules/vmblock-only/linux/dentry.c: In function âDentryOpRevalidateâ:
/tmp/vmware-root/modules/vmblock-only/linux/dentry.c:107: error: implicit declaration of function âpath_lookupâ
make[2]: *** [tmp/vmware-root/modules/vmblock-only/linux/dentry.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmblock-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmblock.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).
If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: error: unknown field âioctlâ specified in initializer
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function âvmci_initâ:
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:151: error: implicit declaration of function âinit_MUTEXâ
make[2]: *** [tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmci.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
The communication service is used in addition to the standard communication
between the guest and the host. The rest of the software provided by VMware
Tools is designed to work independently of this feature.
If you wish to have the VMCI feature, you can install the driver by running
vmware-config-tools.pl again after making sure that gcc, binutils, make and the
kernel sources for your running kernel are installed on your machine. These
packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: error: unknown field âioctlâ specified in initializer
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function âvmci_initâ:
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:151: error: implicit declaration of function âinit_MUTEXâ
make[2]: *** [tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmci.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
The VM communication interface socket family is used in conjunction with the VM
communication interface to provide a new communication path among guests and
host. The rest of this software provided by VMware Tools is designed to work
independently of this feature. If you wish to have the VSOCK feature you can
install the driver by running vmware-config-tools.pl again after making sure
that gcc, binutils, make and the kernel sources for your running kernel are
installed on your machine. These packages are available on your distribution's
installation CD.
[ Press the Enter key to continue.]
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet3 to override.
The module pvscsi has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=pvscsi to override.
Detected X.org version 7.9.6.
No drivers for X.org version: 7.9.6.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [ OK ]
Guest operating system daemon: [ OK ]
Virtual Printing daemon: [ OK ]
The configuration of VMware Tools 8.3.2 build-257589 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
Enjoy,
--the VMware teamActually, I did exactly that:
yum -y install gcc
yum -y install kernel-uek-devel-`uname -r`
yum -y install kernel-uek-headers-`uname -r`
The headers with the uname gave an error that the headers do not exist. The others ran fine.
I did:
yum -y install kernel-uek-headers
and that worked.
However, NONE of this changed the errors - they were exactly the same before and after. The problem is still not resolved.
However, I did try a different approach. I found the VMware Operating System Packages (OSPs) through the following link: http://www.vmware.com/download/packages.html. I installed that, and it seemed to work fine.
The problem that we had, which was the original reason why I wanted to have the VMware tools, was that the disk was sized too small and I thought with the tools we could resize the disk. It didn't work, we could not edit the size in the VMware console. So we ended up blowing away that VM and are in the process of recreating it at a larger size. I'll take a snapshot of the state before the OSP install so I can test the compile version in case someone posts something useful here. -
Oracle 11g on oracle linux 6.1
Hello everyone,
I wanted to instal oracle database 11g on oracle linux 6.1 on virtual box. so, I need some help or installation guide. Any help would be greatly appreciated.
Also, I want to take Oracle DBA 1Z0-051 11g: SQL Fundamentals exam soon. So, I need to do lot of practice before taking that exam.
Is there any free resource to study? please help me.
Thank you
AbdulLinuxx 6 is not a certified platform for Oracle 11g - see these other threads relating to this topic. Use the search feature to find more.
Re: Unable to install oracle 11g in oracle enterprise linux 6
Re: Is Oracle 11gR2 and 10gR2 BOTH compatible with Oracle Linux 6 Update 1?
Follow the steps in the Install Guide, pay particular attention to the prereqs - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/toc.htm
HTH
Srini -
Oracle 11gR2 certification for Oracle Linux 6
Hello,
According to Oracle documentation, database certification and support for Oracle 11gR2 under Oracle Linux starts with 11.2.0.3.
I was wondering if this might have anything to do with the i386 software prerequisites. Speaking of Oracle 11gR2 x86_64, the need for i386 libraries was removed with 11gR2 11.2.0.2. Or in other words, one can go straight to 11.2.0.2 without the need to install any 32-bit libraries.
Under Oracle Linux 5 x86_64, the "oracle-validated" package triggers the installation of several i386 packages. Under Oracle Linux 6 x86_64, the oracle-rdbms-server-11gr2-preinstall package uses x86_64 only. Under Oracle Linux 6, i386 changed to i686.
For what it's worth, I have installed Oracle 11gR2 database 11.2.0.1 under Oracle Linux 6.1 to 6.3, both x86_64, simply by using the oracle-rdbms-server-11gr2-preinstall package, and so far have not noticed any problems. Is there some information available, why 11.2.0.1 (x86_64) should not be used or is not certified for Oracle Linux 6 (x86_64)?
Thanks.I was afraid of that. Since the question is Oracle Linux 6 specific, I thought I'd try my luck here, thinking that if I get an answer, then probably here. Maybe it was not very realistic to get an answer anyway.
For what it's worth. Using "oracle-validated" under Oracle Linux 5, and "oracle-rdbms-server-11gR2-preinstall" under Oracle Linux 6, I was able to install Oracle 11gR2 11.2.0.1 just fine, both platforms x86_64 and 32-bit. I have not found any operational issues yet and it seems to run perfectly well.
The only trouble I had was with Grid Infrastructure 11.2.0.1, and here 11.2.0.3 is indeed required for it to install. I made a custom patch, just a few lines and after that 11.2.0.1, both x86_64 and 32-bit installed just fine and is fully operational.
I'm though I could post the patch. I guess it might make those people happy who do not have access to Oracle support and download 11.2.0.3. The patch will allow them to use the 11gR2 OTN version and install it under Oracle Linux 6. It won't be certified, but it is good enough for the purpose of education.
I'm closing the thread. -
Oracle Linux 6.2 restarts randomly
Hi all,
I'm having problems with Oracle Linux server i recently set up.
I'm running Oracle Linux 6.2 with UEK2 (2.6.39-100.7.1.el6uek.x86_64) and all latest updates from public yum server on VMware eSX 4.1i & VMWare tools installed.
I've been noticing that when I'm connected with SSH to my server I randomly get an error that the connection is lost and all connected sessions fail. It all happens so quickly that I can not check via console if the server really rebooted.
But the data from last reboot command is kinda strange - output bellow.
How it's possible that all last three uptimes are being incremented at once?
Is the server really restarting or is there any timeout on ssh sessions or what is the problem here?
What can I check more?
[oracle@server ~]$ last reboot
reboot system boot 2.6.39-100.7.1.e Thu May 24 08:44 - 09:21 ( *00:36* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:44 - 09:21 ( *23:36* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:36 - 09:21 ( *23:44* )
reboot system boot 2.6.32-300.25.1. Tue May 22 08:52 - 09:36 (1+00:44)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:53 - 08:50 (17:56)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:40 - 14:52 (00:12)
wtmp begins Mon May 21 14:40:40 2012
[oracle@server ~]$ last reboot
reboot system boot 2.6.39-100.7.1.e Thu May 24 08:44 - 09:22 ( *00:37* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:44 - 09:22 ( *23:38* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:36 - 09:22 ( *23:45* )
reboot system boot 2.6.32-300.25.1. Tue May 22 08:52 - 09:36 (1+00:44)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:53 - 08:50 (17:56)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:40 - 14:52 (00:12)
[oracle@server ~]$ last reboot
reboot system boot 2.6.39-100.7.1.e Thu May 24 08:44 - 09:30 ( *00:45* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:44 - 09:30 ( *23:46* )
reboot system boot 2.6.39-100.7.1.e Wed May 23 09:36 - 09:30 ( *23:53* )
reboot system boot 2.6.32-300.25.1. Tue May 22 08:52 - 09:36 (1+00:44)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:53 - 08:50 (17:56)
reboot system boot 2.6.32-300.3.1.e Mon May 21 14:40 - 14:52 (00:12)
Also the time in /var/log/messages matches the time of last reboot:
May 23 13:09:30 server yum[3290]: Installed: libstdc++-devel-4.4.6-3.el6.x86_64
May 23 13:09:31 server yum[3290]: Installed: gcc-c++-4.4.6-3.el6.x86_64
May 23 13:09:39 server yum[3290]: Installed: compat-libstdc++-33-3.2.3-69.el6.x86_64
May 23 13:09:39 server yum[3290]: Installed: libaio-devel-0.3.107-10.el6.x86_64
May 23 13:09:39 server yum[3290]: Installed: ksh-20100621-12.el6_2.1.x86_64
May 23 13:09:39 server yum[3290]: Installed: compat-libcap1-1.10-1.x86_64
May 23 13:09:42 server yum[3290]: Installed: oracle-rdbms-server-11gR2-preinstall-1.0-3.el6.x86_64
May 24 08:27:44 server NetworkManager[1676]: <error> [1337840864.540142] [nm-manager.c:1360] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of nam
e 'org.freedesktop.NetworkManagerUserSettings': no such name
May 24 08:27:44 server rtkit-daemon[2579]: Sucessfully made thread 9387 of process 9387 (/usr/bin/pulseaudio) owned by '42' high priority at nice level -11.
May 24 08:27:44 server gdm-simple-greeter[9378]: Gtk-WARNING: gtkwidget.c:5460: widget not within a GtkWindow
May 24 08:27:51 server NetworkManager[1676]: <error> [1337840871.373588] [nm-manager.c:1360] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of nam
e 'org.freedesktop.NetworkManagerUserSettings': no such name
May 24 08:27:51 server NetworkManager[1676]: <error> [1337840871.430706] [nm-manager.c:1360] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of nam
e 'org.freedesktop.NetworkManagerUserSettings': no such name
May 24 08:27:51 server seahorse-daemon[9442]: init gpgme version 1.1.8
May 24 08:27:51 server rtkit-daemon[2579]: Sucessfully made thread 9461 of process 9461 (/usr/bin/pulseaudio) owned by '101' high priority at nice level -11.
May 24 08:28:01 server NetworkManager[1676]: <error> [1337840881.970501] [nm-manager.c:1360] user_proxy_init(): could not init user settings proxy: (3) Could not get owner of nam
e 'org.freedesktop.NetworkManagerUserSettings': no such name
May 24 08:28:02 server gdm-simple-greeter[9597]: Gtk-WARNING: gtkwidget.c:5460: widget not within a GtkWindow
May 24 08:45:01 server kernel: imklog 4.6.2, log source = /proc/kmsg started.
May 24 08:45:01 server rsyslogd: [origin software="rsyslogd" swVersion="4.6.2" x-pid="1710" x-info="http://www.rsyslog.com"] (re)start
May 24 08:45:01 server kernel: Initializing cgroup subsys cpuset
May 24 08:45:01 server kernel: Initializing cgroup subsys cpu
May 24 08:45:01 server kernel: Linux version 2.6.39-100.7.1.el6uek.x86_64 ([email protected]) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Wed Ma
y 16 04:04:37 EDT 2012
May 24 08:45:01 server kernel: Command line: ro root=/dev/mapper/vg00-lvol4 rd_LVM_LV=vg00/lvol_swap rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb rd
LVMLV=vg00/lvol4 KEYBOARDTYPE=pc KEYTABLE=slovene rd_NO_DM numa=off
May 24 08:45:01 server kernel: Disabled fast string operations
May 24 08:45:01 server kernel: BIOS-provided physical RAM map:
May 24 08:45:01 server kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
May 24 08:45:01 server kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
May 24 08:45:01 server kernel: BIOS-e820: 00000000bfef0000 - 00000000bfeff000 (ACPI data)
May 24 08:45:01 server kernel: BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI NVS)
May 24 08:45:01 server kernel: BIOS-e820: 00000000bff00000 - 00000000c0000000 (usable)
May 24 08:45:01 server kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
May 24 08:45:01 server kernel: BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
May 24 08:45:01 server kernel: NX (Execute Disable) protection: active
May 24 08:45:01 server kernel: DMI present.
May 24 08:45:01 server kernel: Hypervisor detected: VMware
May 24 08:45:01 server kernel: No AGP bridge found
May 24 08:45:01 server kernel: last_pfn = 0x240000 max_arch_pfn = 0x400000000
May 24 08:45:01 server kernel: x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
May 24 08:45:01 server kernel: total RAM covered: 8192M
May 24 08:45:01 server kernel: Found optimal setting for mtrr clean up
May 24 08:45:01 server kernel: gran_size: 64K chunk_size: 64K num_reg: 4 lose cover RAM: 0G
May 24 08:45:01 server kernel: x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
May 24 08:45:01 server kernel: last_pfn = 0xc0000 max_arch_pfn = 0x400000000
May 24 08:45:01 server kernel: found SMP MP-table at [ffff8800000f69b0] f69b0
May 24 08:45:01 server kernel: init_memory_mapping: 0000000000000000-00000000c0000000
May 24 08:45:01 server kernel: init_memory_mapping: 0000000100000000-0000000240000000
May 24 08:45:01 server kernel: RAMDISK: 370bc000 - 37ff0000
May 24 08:45:01 server kernel: ACPI: RSDP 00000000000f6940 00024 (v02 PTLTD )
May 24 08:45:01 server kernel: ACPI: XSDT 00000000bfef07f3 0004C (v01 INTEL 440BX 06040000 VMW 01324272)
May 24 08:45:01 server kernel: ACPI: FACP 00000000bfefee98 000F4 (v04 INTEL 440BX 06040000 PTL 000F4240)
May 24 08:45:01 server kernel: ACPI: DSDT 00000000bfef09e1 0E4B7 (v01 PTLTD Custom 06040000 MSFT 03000001)
May 24 08:45:01 server kernel: ACPI: FACS 00000000bfefffc0 00040
May 24 08:45:01 server kernel: ACPI: BOOT 00000000bfef09b9 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
May 24 08:45:01 server kernel: ACPI: APIC 00000000bfef095b 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
May 24 08:45:01 server kernel: ACPI: MCFG 00000000bfef091f 0003C (v01 PTLTD $PCITBL$ 06040000 LTP 00000001)
May 24 08:45:01 server kernel: ACPI: SRAT 00000000bfef0877 000A8 (v02 VMWARE MEMPLUG 06040000 VMW 00000001)
May 24 08:45:01 server kernel: NUMA turned off
May 24 08:45:01 server kernel: Faking a node at 0000000000000000-0000000240000000
May 24 08:45:01 server kernel: Initmem setup node 0 0000000000000000-0000000240000000
May 24 08:45:01 server kernel: NODE_DATA [000000023ffec000 - 000000023fffffff]
May 24 08:45:01 server kernel: Zone PFN ranges:
May 24 08:45:01 server kernel: DMA 0x00000010 -> 0x00001000
May 24 08:45:01 server kernel: DMA32 0x00001000 -> 0x00100000
May 24 08:45:01 server kernel: Normal 0x00100000 -> 0x00240000
May 24 08:45:01 server kernel: Movable zone start PFN for each node
May 24 08:45:01 server kernel: early_node_map[4] active PFN ranges
May 24 08:45:01 server kernel: 0: 0x00000010 -> 0x0000009f
May 24 08:45:01 server kernel: 0: 0x00000100 -> 0x000bfef0
May 24 08:45:01 server kernel: 0: 0x000bff00 -> 0x000c0000
May 24 08:45:01 server kernel: 0: 0x00100000 -> 0x00240000
May 24 08:45:01 server kernel: ACPI: PM-Timer IO Port: 0x1008
May 24 08:45:01 server kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 24 08:45:01 server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May 24 08:45:01 server kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May 24 08:45:01 server kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
May 24 08:45:01 server kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 24 08:45:01 server kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Can please somebody help? What can I do?
Tnx
Edited by: 936419 on May 24, 2012 12:46 AMJust found errors on VMware host:
24.5.2012 8:44:35
Warning message from *****: Insufficient video RAM. The maximum resolution of the
virtual machine will be limited to 1176x885. To use the configured maximum resolution of
2560x1600, increase the amount of video RAM allocated to this virtual machine by setting
svga.vramSize="16384000" in the virtual machine's configuration file.
24.5.2012 8:44:36
This virtual machine reset by HA. Reason: VMware Tools heartbeat failure. A screenshot is saved
at /vmfs/volumes/4daedaa1-6b086480-d8df-f4ce467f2841/vcloud/vcloud-screenshot-1.png
24.5.2012 8:44:47
Alarm 'Virtual machine high availability error' changed from Gray to Gray
24.5.2012 8:44:47
Alarm 'Virtual machine high availability error' on vcloud triggered an action
24.5.2012 8:44:47
Alarm 'Virtual machine high availability error': an SNMP trap was sent
I have to check with VMware admin where exactly is the problem. -
h1. Oracle Linux NTFS how-to
Author: Dude
Version: B, 22-Jan-2012
h2. Purpose
This document contains instructions how to install NTFS support under Oracle Enterprise Linux version 4, 5 and Oracle Linux version 5 and 6.
h2. Topics
1) Determine Kernel Architecture and Distribution
2) Setup Software Repositories
3) Install the NTFS Kernel Driver and Software
4) Find and Mount a NTFS Device
5) Notes
h3. 1) Determine Kernel Architecture and Distribution
Open a Terminal command prompt and enter the following to check if your system is x86 or x86_64:
# uname -m
x86_64If you see "i686" or "i386" instead then your system is x86.
# cat /etc/redhat-release
Red Hat Enterprise Linux AS release 4 (Nahant Update 9)The above example shows you are running Enterprise Linux version 4.9
h3. 2) Setup Software Repositories
You will need to setup access to two software repositories.
Oracle ULN or public yum:
The installation of RPM software packages can be complex due to software conflicts or package dependencies. It is easier to use a software manager like "yum", which will automatically resolve package dependencies and prompt you to download required software if necessary.
For those who do not have a support subscription and access to Oracle ULN, Oracle provides a public YUM software repository to give you free online access to the standard software distributions. Simply follow the instructions outlined at http://public-yum.oracle.com. You only need to enable the software repository that matches your version according to the previous step.
Reproforge:
The NTFS driver is provided by the Repoforge alias RPMforge software repository. For more information about Repoforge, please see http://repoforge.org/faq. NTFS-3G is a stable, full-featured, read-write NTFS driver for Linux and other operating systems. For more information check http://www.tuxera.com/community/ntfs-3g-download, where you can also download the source code should you prefer to compile your own NTFS driver.
Depending on your current distribution and kernel architecture, you need to install the following:
Oracle Enterprise Linux 4.x x86:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el4.rf.i386.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el4.rf.i386.rpm
Oracle Enterprise Linux 4.x x86_64:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el4.rf.x86_64.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el4.rf.x86_64.rpm
Oracle Enterprise Linux / Oracle Linux 5.x x86:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.i386.rpm
Oracle Enterprise Linux / Oracle Linux 5.x x86_64:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
Oracle Linux 6.x x86:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.i686.rpm
Oracle Linux 6.x x86_64:
# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
# rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpmh3. 3) Install the NTFS Kernel Driver and Related Software
The software packages required to support NTFS depends on your current Linux distribution:
Oracle Enterprise Linux 4.x:
# yum install dkms dkms-fuse fuse fuse-ntfs-3g
Oracle Enterprise Linux / Oracle Linux 5.0 - 5.2:
# yum install dkms dkms-fuse fuse fuse-ntfs-3g
Oracle Enterprise Linux / Oracle Linux 5.3:
NTFS support under Oracle Enterprise Linux 5.3 is broken and you should consider to upgrade to the 5.4 or later. (https://bugzilla.redhat.com/show_bug.cgi?id=481495)
Oracle Enterprise Linux / Oracle Linux 5.4 - 5.x:
As of Oracle Enterprise Linux 5.4 the the kernel fuse module (dkms, dkms-fuse) is included in the kernel and should not be installed.
# yum install fuse fuse-ntfs-3g
Oracle Enterprise Linux / Oracle Linux 6.x:
# yum install fuse fuse-ntfs-3g h3. 4) Find and Mount a NTFS Device
You can use the "blkid" command to identify attached devices. For instance:
sudo blkid
/dev/sda1: LABEL="/boot" UUID="73efxxxxxxxxxxxxx_TYPE="ext3" TYPE="ext2"
/dev/dm-0: UUID="22a2d704-f75dxxxxxxx595df" SEC_TYPE="ext3" TYPE="ext2"
/dev/dm-1: TYPE="swap" UUID="3b74fxxxxxx411c-8671-2244b8735866"
/dev/sdb1: TYPE="ntfs"
{code}
In the above example, device "/dev/sdb1" contains a NTFS partition.
To mount the NTFS volume according to above example under the /mnt directory:
{code}
sudo mount.ntfs /dev/sdb1 /mnt
{code}
h3. 6) References
http://wiki.centos.org/TipsAndTricks/NTFS
h3. 6) Notes
<font color="blue">
<font size="2">
If you experience problems with these instructions, please add only a couple of lines with a link to your own thread explaining the details. I spent some time and effort to create this how-to in the hope that it will be useful. If you would like to use these instructions for your own blog or website, please include a link to this source.
Thanks!
</font>
</font>
Kind regards and best of luck!
Dude.I'm afraid there is no general answer. It depends how your device is connected, i.e. internal, usb, etc.?
-
Installing 11gR2 (linux.zseries64) on oracle linux 5 guest system failed
Dear experts,
I decided to post a detailed thread since it seems my last thread is totally forgotten. Hopefully, this thread could clarify my problem of installing oracle database 11.2.0.2 in oracle linux guest system in windows 7 host system. Sorry about that.
I installed oracle linux 5 update 6 x86_64 bits guest system in my windows 7 host using oracle virtualbox 4.2.12 so that I can install oracle database 11.2.0.2 (linux.zseries64_11gR2_database_1of2.zip, linux.zseries64_11gR2_database_2of2.zip). The oracle database I downloaded has some functions which are not available in 11.2.0.1. These two disks are extracted in a shared folder.
I followed the instructions in a guide to run the installation:
# yum install oracle-validated
It succeeded. and, I used uname -a to return this additional information:
"Linux localhost.localdomain 2.6.32-400.26.2.el5uek #1"
Then I set these below:
SELINUX=permissive
mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01
chmod -R 775 /u01
xhost + 127.0.0.1
and, added something in .bash_profile:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_HOSTNAME=127.0.0.1; export ORACLE_HOSTNAME
ORACLE_UNQNAME=DB11G; export ORACLE_UNQNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=DB11G; export ORACLE_SID
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
Then, I set DISPLAY environment in terminal:
export DISPLAY=127.0.0.1:0.0
Finally, I logged into the guest system as a user, not root, to run the installation. However, I got the frustrating error message:
[hsl@localhost database]$ ./runInstaller
./runInstaller: line 254: /media/sf_My_Share/Oracle/database/install/.oui: cannot execute binary file
Can anybody please give some advices to fix the problem. The installation is very important to me. Thanks a lot in advance.
hongHi,
Yes , its 11.2.0.2
by the way mine is look like this
[oracle@node2 ~]$ cd /media/share
[oracle@node2 share]$ ls -lt
total 0
drwxrwxrwx 1 root root 0 Nov 9 2012 Asmlib
drwxrwxrwx 1 root root 0 Aug 18 2009 DB11g
drwxrwxrwx 1 root root 0 Aug 18 2009 grid11g
[oracle@node2 share]$ cd DB11g
[oracle@node2 DB11g]$ ls -lrt
total 10
-rwxrwxrwx 1 root root 4352 Aug 13 2009 runInstaller
drwxrwxrwx 1 root root 0 Aug 13 2009 rpm
drwxrwxrwx 1 root root 0 Aug 13 2009 install
drwxrwxrwx 1 root root 0 Aug 13 2009 stage
drwxrwxrwx 1 root root 0 Aug 13 2009 sshsetup
drwxrwxrwx 1 root root 0 Aug 13 2009 response
drwxrwxrwx 1 root root 0 Aug 16 2009 doc
-rwxrwxrwx 1 root root 5400 Aug 17 2009 welcome.html
[oracle@node2 DB11g]$
Maybe you are looking for
-
HP Laptop won't talk to HP OfficejetPro 8600 on network
Screwey probblem: The printer is 'conneectd' to the cable modem. (The printer tells me this.) The HP laptop is 'connected to the cable modem. (Or I wouldn't be able to connect to the internet.) They will not talk to each other wirelessley but will
-
Messages "Item completely/partially delivered on purchasing documents
Dear, We're testing the new layouts of the purchase documents for the upgrade to ECC 6.O and there is a problem with a specific message on item level. If a purchase order is changed, a message "Item completely delivered" or "Item partially delivered"
-
Tasks 1.0.A.0.1
While it's nice to see this new Sony app added today via Update Centre with Exchange integration, I note the following on the latest KitKat: - New tasks can't be added via Sony Calendar - the Add Task page just shows a blank. Nor can existing task de
-
hello After trying to activate the DBMS support on my weblogic server, I am unable to restart my weblogic server, I should mention that I run my weblogic through JDeveloper 11g, when I try to execute my project I 'have the following error: NestedThro
-
I have a test fixture I am designing in LabVIEW that is composed of many independent instruments. For simplicity sake I gave all of these instruments a VISA alias (for instance Programmer rather than COM3) so I wouldn't have to guess at which COM por