Oracle Linux 6 installation FAILURE on VMWare virtual machine
I just downloaded OEL 6.0 x64, created a new VMWare virtual machine (I have many VMWare VMs running various flavors of OEL 5) and did an installation. It all seemed to work fine. I was just testing, so I didn't do any customization. It finished, and looked good, just like all the other ones I've done. I clicked "reboot", and it did. Or it tried to.
It did boot from the disk, but after about 15 seconds, it said:
No root device found
Boot has failed, sleeping forever.
I retried the installation using a fresh VM, and even let the installer check the whole DVD first. Same result.
Anyone installed OEL 6 to a virtual machine on VMWare ESX?
Any idea what the heck could be wrong?
The problem is:
The Red Hat compatible kernel includes the vmw_pvscsi driver whereas Unbreakable Enterprise Kernel doesn’t. The kernel that the installer boots first does have the drivers, which is why everything is set up fine until UEK tries to find the root volume. It's an issue we plan to address in an updated kernel.
For now the workaround is:
When creating a new VM in VSphere, do not pick Red Hat Enterprise Linux 6 x86-64 as the OS type but use Oracle Linux 5 x86-64 (or Red Hat Enterprise Linux 5). ESX will then expose the LSI logic scsi controller to the OS and the 2.6.32-100.28.* kernel will work.
Sergio
Similar Messages
-
Oracle 10g IO perfomance on vmware virtual machine
Hi Friends,
I am facing perfomance issue on oracle10g 64bit, installed on rhel5.3 64bit on a vmware virtual machine because of disk IO.
While taking DB backup using netbackup I can see the datatransfer speed comes up to 100 Mbps.
But when oracle IO requests comes it is not going more than 30 Mbps.
And the CPU IO wait remains same as on both of the time. (20% to 40%)
Please help.
Regards,
NayaganCould you verify this behaviour outside a VMware virtual machine?
If yes, then please open an SR on Metalink to let support diagnose.
Provide an RDA, AWR snapshot if you have licensed the Diagnistic Pack - if not than provide STATSPACK snapshots.
Sorry - but this is a database upgrade forum :-)
Regards
Mike -
Problem to connect to VMware virtual machine in VMM
I have a problem to connect to the VMware virtual machine console through the VMM Admin Console. I get the message "For a connection with this virtual VMware machine necessary ActiveX object is not installed. Would like you to install the VMware ActiveX element now?"
If I click "yes", IE opens. To the installation of this ActiveX element I've added the web access side of the VMware-Host to the trustworthy sites in IE. I've also disabled the strengthened security configuration for IE. But it did not help.
What can I still try?
ThxThe most common problem getting the activeX installed is that the VMware infrastructure web portal has not been setup completely. It is from that portal that the activeX is downloaded and installed. Ensure that the VMware infrastructure portal has been setup
and configured for SSL. The Url we attempt to get theactiveX from is https://HostName/ui/plugin/msie/vmware-mks.cab
Uhm, yea, that URL is invalid. Maybe it was for vCenter 3.x? or 4.0 only? Does not resolve on v4.1 :(
If you are having trouble getting the activeX installed there are a couple of workarounds. One workaround is to install the VMWare Infrastructure Client onto your machine where you are running the VMM Admin Console. The Infrastructure Client installation
installs VMWare's activeX along with its own client.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
Another workaround is to login to the VMware Infrastructure Web Access portal and one time connect to a VM. This will also download and install the activeX and let it work.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
So basically I need either the SCVMM guys to figure out to do this in the new version from vmware or I need some vmware experts to tell me where I can find this activex component... -
Oracle product not supported on Vmware virtual environment
Members,
Oracle certification says Oracle products running on Vmware virtual environment are not supported.
One of my development Identity manager setup is running on Vmware virtual environment.
As of now application is running fine and I am getting support from Oracle on product issues.
Can anyone suggest what could be the impact of this in future and what types of issues I can expect in future.
Thanks,
S MCould you verify this behaviour outside a VMware virtual machine?
If yes, then please open an SR on Metalink to let support diagnose.
Provide an RDA, AWR snapshot if you have licensed the Diagnistic Pack - if not than provide STATSPACK snapshots.
Sorry - but this is a database upgrade forum :-)
Regards
Mike -
Flash media server 3 on VMWare virtual machine
Do any one know can a FMS 3 run smoothly on a vmware virtual
machine? if yes, is there any requirement need to be aware? thanks
for any adivse.Rather than VMWare you may want to consider a operating
system-level virtualization. I recommend OpenVZ. This has excellent
native speed performance for the guest OS. I have This system with
the host and guests all CentOS4.5, running variously FMS2, FMS3,
Red5 etc in the guests. Its super easy to start, stop, clone,
distroy the guests. the guests can be firewalled from the host. You
can set guaranteed min and max memory allocations for the guests.
You can run Linux distros as guests that differ from the
host, but you can't run non-linux guests, unlike in VMWare.
Also, the default resource allocations for the newly created
OpenVZ guests are insufficient to run FMS in, so the config file
for the guest needs to be changed. -
Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0
Hello
I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
The process stops when the disk conversion start. Error log below.
Thanks for any advice.
Regards
Toon
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
This conversion will proceed off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
The uninstallation of tools is not supported in off-line machine conversion scenarios.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
NOT preparing source virtual machine, this conversion is being treated as off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
Downloading VMware virtual disks from source virtual machine
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
04/18/2014 14:53:04 +02:00 [9] EXCEPTION:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
04/18/2014 14:53:04 +02:00 [9] Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
04/18/2014 14:53:04 +02:00 [1] Background task is complete.
04/18/2014 14:53:04 +02:00 [1] Conversion error message is displayed.
04/18/2014 14:53:04 +02:00 [1] Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
04/18/2014 14:53:06 +02:00 [1] Pressing Finish on the 'Completion' page.
04/18/2014 14:53:06 +02:00 [1] UI wizard is closing.
04/18/2014 14:53:06 +02:00 [1] Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
04/18/2014 14:53:09 +02:00 [1] Cancel confirmation prompt was canceled by user.Hi,
Have you found any solution?
Thanks
Alessandro -
I was able to migrate all my stuff from the old iMac to the new iMac but can't access my VMware virtual machine. How do I transfer it from the old to the new.
I would
1. use an ext hd or usb stick to copy them over to manually
2. transfer them manually over the network to a shared volume
never could get migrate to work at all from my old windows pc
so I ended up copying everythign -
HT3231 Migration Assistant and vmware virtual machine
I would like to use Migration Assistant to move my information from a MacBook Pro to a new MacBook Air. Before I perform that, I would like to make sure I don't migrate any problems in the new machine.
How do I choose for example NOT to migrate the VMWARE virtual machine in my older MacBook Pro so that the new MacBook Air becomes lighter?
ThanksDuring the setup of your MacBook, it will ask you to restore a backup, so choose the option to restore data from another Mac and follow its steps. You will be able to choose what you want to restore.
If you haven't modified anything, VMware stores virtual machines in Documents folder, so the only thing you have to do is to untick the Downloads folder and the virtual machine won't be migrated to the MacBook Air. See > http://pondini.org/OSX/SetupLion.html
If you are going to migrate applications, it's important to check that they are compatible with Mountain Lion. PowerPC applications aren't compatible and you will be wasting space if you transfer these apps -
Oracle Linux 5.7 on VMWare player Issue
I am attempting to Install Oracle Linux 5.7 on Vmware player. When "installing VMTools" via the command prompt, this is what happens when I run the config tool. In the end I run into this error. I am looking for help on what the error means and what I need to do about it:
X is running file with the new config file
Creating a new initrd boot image for the kernel.
No module ehci-hcd found for kernel 2.6.32-200.13.1.el5uek, aborting
ERROR: "/sbin/mkinitrd -f --with=vmxnet3 --with=vmw_pvscsi ---with=vmxnet
/boot/initrd-2.6.32-200.13.1.el5uek.img 2.6.32-200.13.1.el5uek" exited with non zero status
Your system currently may not have a functioning init image and may not boot properly. Do NOT REBOOT! Please ensure you have enough free space available in your /boot directory and run this configuration script.
Execution abortedEssbaseApprentice wrote:
No module ehci-hcd found for kernel 2.6.32-200.13.1.el5uek, abortingThe ehci-hcd (and other) USB modules are built into our kernel, but not the RHEL kernel, which is why you're getting this error. If you have the mkinitrd line it's trying to run, you'll have to add --builtin=ehci-hcd* to the line for the initrd to build properly. -
Cannot find an Oracle Linux installation for 32 bit machines
Can anyone show me where to find a linux oracle 11g or 10g installation for a 32 bit machine.
The ones I downloaded from oracle are all for x86 64bit machines.
ThanksOn following page
http://www.oracle.com/technology/software/products/dat
abase/index.html
this is the link
http://download.oracle.com/otn/linux/oracle11g/linux_x
86_11gR1_database.zipWhat I actually said is that the link provided is for 64bits linux machines.
When I try running uname -r on my linux bash prompt, I get the i3686 tellin g me that I am running a 32bit machine.
On the other hand, installation guide specifies that we should check the kernel version and system architecture.
I don't think I should continue installation on seeing that I am trying to install a 64bit product on a 32bit system.
Regards,
Michael
Message was edited by:
okmich -
Oracle Linux Installation - Custom Partitioning - GPT Partitioning
we have successfully installed Oracle Linux 5.5 on IBM - System X3650 M3 machine and later scrapped this Linux OS and Installed Windows 2008 OS for other demo purpose.
Now again we are trying to install the Oracle Linux on this machine we are encountering the below issue...
Oracle Linux 5.5 installation on IBM - System X3650 M3
Encountering below error message while creating the custom partitioning creation
Partitioning Error
The following critical errors exit with your requested partitoning scheme.
Your boot partition is a disk using the GPT paritioning scheme but this machine cannot boot using GPT.
These errors must be corrected prior to continuing with your install of enterprise linux.
Please help.
Edited by: user13681259 on Jun 18, 2012 1:07 AMThanks, we managed to clear GPT partition and continued the installation processs...
we have successfully installed Oracle Linux 5.5 on IBM - System X3650 M3 machine and later scrapped the Linux OS and Installed Windows 2008 OS for other demo purpose.
Now again we are trying to install the Oracle Linux on this machine and the machine is NOT detecting the network devices and the network configuration screen does not appear during the installations to assign the staticIP and the hostname to the machine.
Now, the Network Devices screen is NOT displaying during the installtion (where we have to enter the IP Address and hostname details)- the Network Devices Screen should come after the partition layout and GRUB boot loader screen.
The network cable is attached with this machine already.
# lspci | grep -i net
0b : 00.0 Ethernet controller : Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
0b : 00.1 Ethernet controller : Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet
#ifconfig
lo
Link encap:local Loopback
inet addr 127.0.0.1 mask 255.0.0.0
usb0
Link encap:Ethernet HWaddr E6.lF:l3:A8:AF:3F
inet addr:169.254.95.120 Bcast:169.254.95.255 Mask: 255.255.255.0
#ifconfig -a
lo
sit0
usb0
Any help would be appreciated.
Edited by: user13681259 on Jun 19, 2012 1:02 AM
Edited by: user13681259 on Jun 19, 2012 1:16 AM -
Need:Oracle Linux Installation Suggestions
Hello All
I want to use(learn) oracle in Linux environment.I'm having Windows XP SP2.I'm planning to install linux and Oracle using VM Ware on my XP.Give me some suggestions that with is suitable linux OS(ubuntu,redhat,..,) for oracle 10g(I'm have ubuntu 8 not installed). so i need all your valuable suggestions
ThanksAs suggested earlier You can go Oracle Enterprise Linux. Also I would like you to go through following document, since you are planning to install Oracle on VM Ware environment
Support Position for Oracle Products Running on VMWare Virtualized Environments (Doc ID 249212.1)
Oracle VM and VMWare Certification for Oracle Products (Doc ID 942852.1)
Regards -
[vmware] Virtual machine communication interface failed
hello,
on a fresh install of archlinux, i have installed vmware workstation 11.0 but when i execute this command :
vmware-modconfig --console --install-all
i have this error
Virtual machine communication interface failed
full log
vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/cpuid.o
/tmp/modconfig-sc9HDC/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/task.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/hub.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/userif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/netif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/bridge.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/procfs.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
[root@hulk vmware-root]# ls
vmware-818.log vmware-authdlauncher-2058.log vmware-vmis-1888.log
vmware-apploader-1976.log vmware-vmis-1407.log vmware-vmis-1910.log
vmware-apploader-818.log vmware-vmis-1429.log
[root@hulk vmware-root]# chown gael:users *
[root@hulk vmware-root]# chown -R gael:users ./
[root@hulk vmware-root]# modprobe vmci
modprobe: FATAL: Module vmci not found.
[root@hulk vmware-root]# vmware-modconfig --console --install-all -v
/usr/lib/vmware/bin/vmware-modconfig-console: invalid option -- 'v'
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/cpuid.o
/tmp/modconfig-KdpHql/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmnet-only/driver.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/hub.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/userif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/netif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
thanks for your helpAlso having the same problem
dustin ~ $ sudo vmware-modconfig --console --install-all
[sudo] password for dustin:
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-KZzuso/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
make: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmnet-only/driver.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/hub.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/userif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/netif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetEvent.o
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2248:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:42:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetUserListener.o
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:52:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2248:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
Now I have the same failed communication interface also
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
PS, I have the vmware-patch 11.0.0-1 installed -
Network problems with Oracle Linux 5.7 on Vmware ESX 4.1
We recently installed Oracle Linux 5.7 64 on Vmware in order to run OVM Manager 3.02. The VM experiences random frequent network connectivity problems. There are no errors showing up in the network stats. The Vmware environment hosts many production VMs with no issues. We did have some trouble configuring Vmware tools with the uek kernel, so we booted the vm with the base kernel and we were then able to configure Vmware tools with no problems. We have tried running the VM on two different ESX servers with no improvement.
The network connectivity problems persist even with the base kernel. We get random ping failures into and out of the VM, and random disconnects of ssh terminal sessions.
I am not very experienced with linux, being primarily a vmware and aix admin. Any tips on stabilizing Oracle Linux on Vmware are greatly appreciated otherwise, I will have to beg for a new server to host the OVM manager.
Thanks,
BobThe network connectivity problems persist even with the base kernel. We get random ping failures into and out of the VM, and random disconnects of ssh terminal sessions.Before you check on software and driver updates you might want to check your hardware settings. I've seen problems like this before when using a bad network cable or having a duplex mismatch. The later can happen when changing from a router to a network switch and configuring the switch for fixed full duplex. Depending on which end you sit you won't even see any network errors, but packages will disappear depending on traffic. Make sure you have set server's NIC and network switch port to the same topology ie. fixed or auto-negotiate, but not mixed. You can use the "ethtool" on the Linux system to verify the current settings.
-
Monitor profiling & ICC profile management in VMware virtual machines?
Greetings,
I'm successfully running Photoshop CC in Windows 7 on bare metal PCs. To support that, I profile/calibrate my monitors with Datacolor Spyder4Elite and print with Qimage. Photoshop, Spyder4, and Qimage all create and/or install ICC profiles. Does any/all of that function correctly within virtual machines hosted by VMware Workstation (v9.0.2, specifically)? Datacolor's Spyder4Elite, for example, relies upon periodic reloading of the LUT (Look-Up Table) of the graphics adapter. The other apps I mention ask Windows to use ICC profiles. Can I successfully move all of these workflow elements into virtual machines?
Thanks in advance for your assistance.No, actually the System Default stayed the same, but the ACER profile showed up in the Devices panel. However, [ ] Use My Settings was NOT checked, implying they found some way to install the profile that's outside the normal configuration settings somewhere between the Advanced and Devices level configuration.
The fix is to check the [ ] Use My Settings box, add the profile one wants to use in the Devices panel, and [Set as Default Profile]. This overrides the setting above.
-Noel
Maybe you are looking for
-
Field-symbols v/s Object references in OO-ABAP
Hi, can anyone please tell me what is the difference between using field-symbols and object references in OO ABAP? Is there a specific need for field-symbols now that we have references? Thanks. Shakul.
-
Error in Posting Excise Invoice - Accounting document not generated !
Hi, We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK. While we are trying to post the Excise Invoice, the system is displaying the following error: Accounting document not genera
-
Business partner retrieval from BOL
Although I am not new to ABAP and CRM I have difficulties understanding how the BOL/GENIL principal works and how to make full use of it. Problem: I have developed a custom BSP which is called from IC Webclient (ZC_ICWEB). I would like to know if the
-
Udf mapping: any way to detect last processed record?
Hi ! I need to detect inside my java user defined function, in the graphical mapping, if I am processing the last record of my input message, for example to add a trace message about how many records were processed, etc....I know I can detect the fir
-
I Forgot my answers and forget security info email
Dear Apple I Forgot my answers and forget security info email to r•••••@yahoo.com I forget what email i am used of my security answers please help me for this problem Best Regard Apple ID:[email protected]