Oracle List of Error codes and messages

Hi,
In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
Thanks

In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"

Similar Messages

  • Where can find Oracle error code and message?

    Where can find Oracle error code and message?

    http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
    That would be the "Error Messages" manual.

  • Oracle Error Code and Message for Query Timeout

    Hi,
    I need to catch the oracle error code and message for query timeout.
    I am using Oracle 9i and could not find any relevant error code/message
    for query timeout in Oracle Error Messages.
    If anyone has encountered such error messages, please let me know the
    Oracle Code or Error message.
    Thanks & Regards,
    Kanjana

    Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
    The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
    But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
    HTH -- Mark D Powell --

  • Is there a listing of error codes and what they mean?

    Continually get -3150 and -3252 codes. Can't find info when I search the site. Looks like lots of other error codes. Didn't know if anyone knows where to find a list of what the codes mean...and ways to make them stop.
    Thanks.

    It happens when the server can't connect to LDAP server. Check to make sure your server is connecting to directory server by going to "Users & Groups" tab in the administration server UI.

  • Trouble installing AOL software-error code and message during instal

    I had the earliest version of AOL software installed initially with the intro of Mac OS 10. Upgrading to the latest version of AOL's software for OS 10, now using OS 10.4.4, interupts during the installation process with the message 'Error creating folder' and the code 1008:9,-5000.
    I have deleted all files referencing any other version of AOL on the computer including all items in System 9 (I also used this opportunity to delete all vestiges of System 9 from the computer). Everything is up to date on the computer. Both AOL online and telephone support were worthless. Any help would be appreciated.

    problem was solved much later by installing the program onto a blank CD-R and then moving it onto the hard drive in the applications folder. Never figured out what the error message meant

  • How to find all ORA error code and the message in Oracle10g?

    Does anyone knows how to list all ORA error code and message in SQL Plus or find a full list of ORA error code in documentation?

    If you want ALL Oracle ORA error codes in single page or even downloadable (html or pdf format) then check following post.
    http://www.oratraining.com/blog/2010/08/complete-list-of-all-oracle-ora-errors/
    Regards,
    Tushar
    Edited by: oratraining on Aug 18, 2010 12:20 AM

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • I have a 1654 error code and is not listed....what do I do?

    i have a 1654 error code and is not listed. what do I do?

    Try disabling the Ask Toolbar extension.

  • Oracle Error code: 1116, message: ORA-01116: error in opening database file

    Hi ,
    Please advise on this error message
    Oracle Error code: 1116, message: ORA-01116: error in opening database file 202 ORA-01110: data file 202: '/u02/app/oracle/oradata/ubidev12/dbf/temp02.dbf'
    All these while, the dashboard working well in my local computer application with server database.
    Just discovered this error when I refresh the data.
    Kindly advise.
    Thanks,
    Kim Yoke

    the more detail error is
    Oracle Error code: 1116, message: ORA-01116: error in opening database file 203 ORA-01110: data file 203: '/u02/app/oracle/oradata/ubidev12/dbf/temp03.dbf' ORA-27041: unable to open file SVR4 Error: 2: No such file or directory Additional information

  • When synchig my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    When synching my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

  • APEX 4.0.2 Project Gantt Chart - Error Code: 2002 Message: Empty input

    Hi
    I have created a brand new page containing a Project Gantt Chart region. The Gantt chart is designed to track the progress of a job over time. The page has one chart series containing the following SQL.
    SELECT null LINK,
    stage NAME,
    rownum ID,
    null PARENT_ID,
    trunc(start_date) ACTUAL_START,
    trunc(completion_date) ACTUAL_END,
    decode(completion_date, null, 0, 100) PROGRESS
    FROM tracking
    WHERE job_reference = '889343'
    This SQL statement returns values from SQL Developer and from the SQL Workshop > SQL Commands from within APEX itself.
    The problem is that when I run the page the following error displays inside the region
    Category: 2000
    Error code: 2002
    Message: Empty input
    Environment Information
    Application Express 4.0.2.00.07. - Clean installation not upgraded from APEX 3
    Using Firefox 3.6.15
    Issue identical in IE
    DB version - Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
    I'm really stuck so I hope someone can help me out. I really would appreciate it.
    Thanks
    Kylie

    Debug mode doesn't appear to have picked anything up that looks out of the ordinary to me or raises any alarm bells.
    This is the XML with a reduced number of records returned.
    <anygantt>
    −
    <settings>
    −
    <title align="Center" position="Top">
    <text>Resources Gantt</text>
    −
    <font_style>
    <font face="Tahoma" size="2" color="0x000000"/>
    </font_style>
    </title>
    <outer_margin left="0" top="0" right="0" bottom="0"/>
    −
    <background>
    <fill type="Solid" color="0xffffff" opacity="0"/>
    <border enabled="false"/>
    <corners type="Square"/>
    </background>
    <navigation enabled="true"/>
    −
    <locale>
    −
    <date_time_format week_starts_from_monday="True">
    −
    <months>
    −
    <names>
    January,February,March,April,May,June,July,August,September,October,November,December
    </names>
    <short_names>Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec</short_names>
    </months>
    −
    <week_days>
    −
    <names>
    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    </names>
    <short_names>Sun,Mon,Tue,Wed,Thu,Fri,Sat</short_names>
    </week_days>
    −
    <format>
    <full>%yyyy.%MM.%dd.%HH.%mm.%ss</full>
    <date>%yyyy.%MM.%dd</date>
    <time>%HH.%mm.%ss</time>
    </format>
    </date_time_format>
    </locale>
    </settings>
    −
    <datagrid enabled="true">
    −
    <columns>
    −
    <column width="40" cell_align="Center">
    −
    <header>
    <text>ID</text>
    </header>
    <format>{%ID}</format>
    </column>
    −
    <column attribute_name="Name" width="180" cell_align="Center">
    −
    <header>
    <text>Name</text>
    </header>
    <format>{%Name}</format>
    </column>
    −
    <column attribute_name="ActualStart" width="80" cell_align="Center">
    −
    <header>
    <text>Start Date</text>
    </header>
    <format>{%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}</format>
    </column>
    −
    <column attribute_name="ActualEnd" width="80" cell_align="Center">
    −
    <header>
    <text>End Date</text>
    </header>
    <format>{%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}</format>
    </column>
    </columns>
    </datagrid>
    −
    <timeline>
    <plot line_height="30" item_height="15" item_padding="5"/>
    </timeline>
    −
    <styles>
    −
    <period_styles>
    −
    <period_style name="defaultStyle">
    −
    <tooltip enabled="true">
    −
    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    −
    <bar_style>
    −
    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>
    −
    <states>
    −
    <hover>
    −
    <middle>
    <border enabled="true" type="Solid" color="Red"/>
    </middle>
    </hover>
    </states>
    −
    <start>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>
    −
    <end>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </period_style>
    </period_styles>
    −
    <task_styles>
    −
    <task_style name="defaultStyle">
    −
    <tooltip enabled="true">
    −
    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    −
    <row_datagrid>
    −
    <tooltip enabled="true">
    −
    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>
    −
    <actual>
    −
    <bar_style>
    −
    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>
    −
    <states>
    −
    <hover>
    −
    <middle>
    <border enabled="true" type="Solid" color="Red"/>
    </middle>
    </hover>
    </states>
    −
    <start>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>
    −
    <end>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </actual>
    −
    <progress>
    −
    <bar_style>
    −
    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>
    −
    <start>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>
    −
    <end>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </progress>
    −
    <baseline>
    −
    <bar_style>
    −
    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>
    −
    <start>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>
    −
    <end>
    −
    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </baseline>
    </task_style>
    </task_styles>
    −
    <resource_styles>
    −
    <resource_style>
    −
    <row_datagrid>
    −
    <tooltip enabled="true">
    −
    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>
    </resource_style>
    </resource_styles>
    −
    <defaults>
    −
    <task>
    −
    <task_style>
    −
    <row_datagrid>
    −
    <tooltip enabled="true">
    −
    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>
    </task_style>
    </task>
    </defaults>
    </styles>
    −
    <project_chart>
    −
    <tasks>
    <task id="1" parent="" name="STAGE1" actual_start="2010.08.11 12.08.00" actual_end="" progress="0" style="defaultStyle"/>
    <task id="2" parent="" name="STAGE2" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    <task id="3" parent="" name="STAGE3" actual_start="2010.07.27 12.07.00" actual_end="2010.08.06 12.08.00" progress="100" style="defaultStyle"/>
    <task id="4" parent="" name="STAGE4" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    <task id="5" parent="" name="STAGE5" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    </tasks>
    </project_chart>
    </anygantt>
    Thank you for your assistance.
    Regards
    Kylie

  • Oracle 10g HttpServerASControl error code 2

    Hello everyone!
    I have been struggling to no end the past couple days and i would like to see if anyone else has figured this out/has the problem.
    I installed Oracle 10g on my Windows Xp SP2 laptop and i set up all the settings, but for some reason in my services window i see that my OracleHTTPServerASControl will not start! i keep trying to start it and i get a Error Code 2 message and theres not much documentation on it...
    Anybody willing to help me out? I have my loopback adapter set up and working just fine, and my SqlPlus i can log into, but i can not go into http://localhost ?
    Any help would be much appreciated!

    Hi,
    post there as well:
    Oracle Application Server - General
    Sim

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

  • Problem Getting Error Code and Description in Alerts

    We are having trouble getting the Error code and Error description in the Alerts and we're having trouble getting a alert for message mapping exceptions.  I have read through the BLOGs and the help on SAP.  I'm not sure it is something to do with the configuration or SP14.  We did not have these problems with SP12 at our other customer XI implementations.
    Background -
    We have setup an "XI Alert" classification with three Alert categories -"XI_Mapping_Error", "XI_Adapter_Error", "XI_Runtime_Error". 
    For the "XI_Mapping_Error" alert category, we have setup a rule so that any Integration Engine Application Mapping.* Error code will create an alert.  However, when we have a mapping error in XI which we can see in MONI, we do not get an alert.  The checkbox for "Suppress Multiple Alerts of this Rule" is not selected.  I am not sure why we're not getting the alert.
    For the "XI_Adapter_Error" alert category, we have setup a rule so that any Adapter Engine * adapter type will create an alert.  The alert gets created - however, some of the container variables do not get poulated in the email.  We have defined Container variables pointing to the corresponding ABAP data dictionary elements - i have double checked these definitions.
    Here is an alert email - the Error Code (SXMS_ERROR_CODE -  SXMSERRTX) and Error Category (SXMS_ERROR_CAT - SXMSERRCAT) are not being extracted:
    Alert ID: ##23896##
    Error Code =
    Error Category =
    Message ID = 1506eab0-6125-11da-9ba2-00505685 Time = 14:26:12 Date = 29.11.2005
    Sender Party =
    Sender Service = BS_CPI
    Sender Interface = MI_CPI_INV_RFC_REQ_ABS
    Receiver Party =
    Receiver Service = BS_CPI
    Receiver Interface =
    We are not able to figure out why the Alert framework is not working correctly.  We are running XI 3.0 SP 14 on Win2K, SQL 2000.
    Anyone encounter these problems?  Any help would be appreciated.
    Regards,
    Jay Malla

    >> There are some problems with SP 14 and the alert framework.
    Very true! Join the team!
    >> We applied Note 876546 which triggered certain alerts that were not getting triggered. However, we're not getting the Error code and Error Description in some of the alerts.
    Jay, This note is specifically for a situation where the 'where did the error occur' set to No Restriction. I don't think anything else is included in this fix .01 to patch 0.9 of SPS 12 of XI 3.0!!!
    My problem is that even the messageID variable is not getting replaced!!! In SP12 everything was perfect. After SP14, the errors are coming almost instantaneously to the inbox, but without any variable replacement.
    Best of luck,
    Kannan

Maybe you are looking for

  • Distinct and Unique

    hii, Is there any difference between distinct and unique in sql...

  • MIRO and  Payment document link

    Dear Experts, Please guide me, How to get the link between payment document  and Miro  document ,  any table or report? Regards Chandu

  • Central Contract Management

    Dear SAP Experts, I have a few questions regarding our implementation of SRM and ECC. FYI, we are planning to use SRM 7.01 and ECC 6.05 as backend. We're planning to utilize Central Contract Management functionality in SRM, where we negotiate the pri

  • Bug report: Russian Translation Messages

    There are several incorrectly translated messages. Better translation is below. English original is back-translated, so could be not exact in all cases. Russian text should be replaced. Mail - Setup - View/Actions (Почта - настройки - отображение и д

  • Can you still download lightroom 4?

    Can you still download the trial version of Lightroom 4?