Oracle Lite and Oracle 8i Client on Win98
I've had Olite v8i running on my Win98 machine for a while now. I just installed Oracle 8i Client on my machine. Now, my JDBC driver for Oracle Lite does NOT work. What could have happened here??
Thanks.
-Jeremy
null
HI Jeremy,
I think, Your PATH was cranked up.
The JDBC driver for OLite normally does not use any OCI DLLs, so that should not be the problem. As I said, the OLite dlls may be missing now from the PATH.
Any error messages? "Does not work" is a bit... fuzzy.
Similar Messages
-
Is it possible to use Oracle Forms with Oracle Lite. I have some problems in connecting Oracle forms 6 with Oracle Lite 8.0.
Surender,
It is not possible to use Oracle Forms with Oracle Lite. If you are trying to use Forms with Oracle Database 8i, you might try asking your question in the Oracle Database forum, located here:
General Database Discussions
Cheers,
Junius -
We are experiencing difficulties with installing oracle lite with Oracle RAC 10.2. Does anybody knows if this is possible?
thank's in advance!The problem's were mostly implementation specific. What you need to do for RAC is to configure the mobile server to use the thick client in stead of the thin client. There is a metalink document about this (Doc ID: Note:339108.1).
How to configure the mobile server with a RAC DB
Solution
1) Edit the file $ORACLE_HOME/mobile/server/bin/webtogo.ora
2) Change this Parameter:
ADMIN_JDBC_URL=jdbc:oracle:thin:@hostname:port:1521
TO
ADMIN_JDBC_URL=jdbc:oracle:thin:@DESCRIPTION=(ADDRESS=(PROTO =TCP)(HOST=clora1vip.aem.torin
.it)(PORT=1521))(ADDRESS=(PROTO =TCP)(HOST=host_name)(PORT=host_port))(LOAD_BALANCE=yes
(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=sid_name)(FAILOVER_MODE=(TYPE=SELE
CT)(METHOD=BASIC)(RETRIES=180)(DELAY=5))))
3) Save the File and restart the mobile server. -
About Oracle-xe and Oracle-xe-client
Hi all,
I prefer tell you I'm french and I may do mistakes... ^^
I use Oracle database on my computer because I've a course about Oracle and PL/SQL. So I'm the single user of this database.
I would like to know if I must install oracle-xe and oracle-xe-client or If oracle-xe is enough (whithout oracle-xe-client) to test my procedures/queries/etc... ?
Thank you for your help. :DI would like to know if I must install oracle-xe and
oracle-xe-client or If oracle-xe is enough (whithout
oracle-xe-client) to test my procedures/queries/etc... ?Oracle-XE is enough for you to test your procedures/queries/etc...
Check following link , for how to install
http://st-curriculum.oracle.com/tutorial/DBXETutorial/html/module1/wininst.htm
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com/ -
Is it possible to import and export dump between oracle 9 and oracle 11?
Is it possible to import and export dump between oracle 9 and oracle 11?
Source DB : Oracle 11g(unix0
Oracle client : Oracle 9(Windows)
Export import utility : Oracle 9's
Destination DB : oracle 9I am getting the Following Error and export utility is not responding after this.
Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion) -
Conflict between oracle 8 and oracle 11
Hi,
I'm having a problem installing oracle 8 and oracle 11 homes at the same time. It looks like the system can only recognize one of the homes. I have 2 different applications running in the same computer. One of them uses oracle 11 and the other oracle 8. The problem is, the one with the oracle 8 can't recognize it, and tries to use the 11, saying it doesn't support the connection. I've checked the registry info and it looks like there is only one Home specified. Should I create a new one? More over, when i use the home selector it says there's only one home available.872175 wrote:
Yea they are, I even tried to use a script similar with:
SET PATH=D:\ora11\product\11.2.0\client_1\BIN;%PATH%
D:
cd "app_folder"
app.exe
EXIT
to make sure the variable with be the correct when we tried to open the application. I can use the application linked to the oracle 11 but, when i try to get in the other it gives me the following error:
The procedure entry point orasql10.sqlxss could not be located in the dynamic link library orasql8.dll.When you change the environment variables in a command line window (run cmd.exe), the changed variable values only exist in that command line window, but those environment variables are inherited by other programs started from the command line window. If the Oracle 8i client is normally listed first in the PATH environment variable, and you want to execute another program that requires the 11g client, you will need to repeat the above steps for the second program.
You can use a program named Dependency Walker to see which DLL files will be accessed by a program (or even a DLL such as ORASQL10.DLL). In the case of a DLL, you would be able to determine if a specific function name sqlxss (ordinal 183 in this case) exists in that DLL. The Dependency Walker program typically ships with Microsoft's development environments. You can find out more about that program here:
www.dependencywalker.com
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
Accessing Oracle 7 and Oracle 9 Operations
Hi,
My application requires Oracle 7 and Oracle 9.
I created a domain and deployed my application successfully. In my Server lib i have ojdbc.jar which supports Oracle 9. but i need Oracle 7 and Oracle 9 drivers my application can do all DML Operations to the respective Databases.
Regards,
Bala VoletiSait, Thanks for the analysis.
I have DEFAULT_HOME for Oracle 7 and ORACLE_HOME for Oracle 8. Each of them have their own tnsnames.ora, but is almost same. Oracle 8 client install created its tnsnames.ora from existing Oracle 7 tnsnames.ora. There are Oracle dictionary tables like v$session_connect_info, which shows the list of sessions and other details. Is there one to tell the client sql*net version? Or any log file? -
Sharing in Symetrics Array an Oracle datawerehouse and oracle database 9i
I
i want to know if someone have an sharing in Symetrics Array an Oracle
datawerehouse and oracle database 9i, or any array for high
availability. This because i have to do implement an installation
datawarehouse and db9i on the same arrary. Just know any comment if
whichever with share with me your expertise from any situation with
this, please.
ThanksThanks for the reply.
Actually I thought that the OCCI forum was for Object oriented OCI, so while I'm using C++, I'm not using the object oriented side of OCI, just using the normal OCI calls. Guess I should have been a little clearer in my original post.
But my main question really concerned the version of the client and the version of the database which you answered.
Thanks,
Nick -
Questions on the comparison between Oracle Forms and Oracle APEX
Hi All,
The link below presents information about Oracle Application Express for Oracle Forms Developers, the table at the end of the page shows a comparison between Oracle Forms and Oracle APEX, all the points of comparisons are clear for me except 3 points which are:
•Locking, what is meant by locking models?
•Database Connections, what is meant by Synchronous/Asynchronous connections in Oracle Forms and Oracle Apex?
•Architecture, what is meant by 2tier and 3 tier connections?
http://www.oracle.com/technology/products/database/application_express/html/apex_for_forms.html
What I need is a simple explanation for these points without deep details.
ThanksHi
That is how I understand that document:
Locking: Forms, by default, locks a row as soon as the user starts modifying the data. That is pessimistic locking. Apex, on other hand (and optionally forms also) do not lock the record, but before applying any changes checks if the data has changed since the user queried it (what for some reason is called optimistic "locking")
DB connections: I am not sure why they used the terms synchronous/asynchronous, but the difference is that Forms, by default, keeps an permanent DB connection while the user is using the application, while Apex gets a connection from a connection pool every time a page is requested/submitted.
Architecture: Forms (in its web version at least) has 3 tiers: the browser, the appserver where the forms service runs and the database. As Apex runs inside the database, there are only 2 tiers: the browser and the database (though you still may need an http server in between which serves static content, I don't think it is considered part of the application in this context). If you are talking about client/server forms, then there are only 2 tiers.
I hope this helps!
Luis -
Select query differences between oracle 9 and oracle 8.
Hi,
I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
ex:
With oracle7
SQL> select 'champ1','champ2' from DUAL;
'CHAMP 'CHAMP
champ1 champ2
With Oracle 9
SQL> select 'champ1','champ2' from DUAL;
'CHAMP1' 'CHAMP2'
champ1 champ2
So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
Thanx.Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
My suggestion is -> First Go through the basics Of SQL in general.
Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
And, finally learn the advanced commands of that DB.
You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
Anyway,
You can get the quite familier output by first type the following command ->
set lin 310Regards.
Satyaki De. -
Oracle Spatial and Oracle Forms
Hi,
Does anyone have experience with Oracle Spatial and Oracle Forms?
I have generated a form, which is based on a view. The view uses the mdsys.sdo_relate operator. Somehow I am unable to get the form to perform (to get one record it takes over 20 minutes). While useing sql-navigator to process the same statement it seems no problem. The query that also uses the view, is then processed in 10 seconds.
I also noticed that when text-functions like ' lower' of ' upper' are used to query the view, the query is processed within 15 seconds. If I don't use ' lower' or ' upper' it takes a long time (> 20 minutes) to process the query. Is it possible that this causes the bad performance of the form?
On metalink I have found that forms and spatial do not cooperate because of the pl/sql version that
forms6 uses. There is no solution presented, does anyone know of a work around?
My configuration is:
Oracle 8.1.7 on WIN2K @ PIII-800Mhz 256 Mb memory.
Formsbuilder 6
If requested I can post the queries that I have made.
With regards,
Gerjan Walrecht
[email protected]
nullHello Priya,
Look into the following.
1. Book - Pro Oracle Spatial for Oracle Database 11g by r. Kothuri, A. Godfrind, E. Beinat. This book provides a nice introduction on Oracle Spatial concepts and have examples.
2. Look at the Oracle Spatial & Graph User Guide
2. Book - Applying and Extending Oracle Spatial by S. Greener and S. Ravada. This book provides hands on information for advanced oracle spatial application developers. Practical guide on hands-on examples, Data models and develop cross-vendor database solutions.
3. This oracle spatial forum, once you understand these concepts.
In the future consider Certification on Oracle Spatial 11g Certified Implementation Specialist.
Best
Navaneet -
What are the major differences between oracle 10g and oracle express 10g
Hi
Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
Or if you know any URL, then please do let me know.
Advance Thanks
JCDear sir,
here it is.
http://www.oracle.com/database/product_editions.html -
Differences in NLS_LANGWE8ISO8859 between Oracle 8i and Oracle 9i or higher
Are there any differences in NLS_LANG WE8ISO8859P1between Oracle 8i and Oracle 9i or higher?
please, there is a document that explains what.
thank you very much.Ok,
I want to know whether there was any difference when using this NLS_LANG between 8 and oracle 9.
I read many documet about unicode, but i want to know this question.
If NLS_LANG is a standard there isn´t changes between the to versions. -
Differences between Oracle BAM and Oracle BI and Question BAM Data Objects
Hi,
I have two questions.
1. Can someone tell me differences between Oracle BAM and Oracle BI?
My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
We can also build DashBoards or reports using Oracle BI.
I am not able to understand why Oracle has two tools for same purpose?
Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
I am wrong pl correct me?
Regards,
Shanti Nagulapalli.Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks -
Oracle 8i and Oracle 9i On Redhat 7.1
I have installed oracle 9i on SuSe 7.1 and Mandrake 8.0 successfully!!But when I want to install Oracle 8i and Oracle 9i on Redhat 7.1,it goes wrong! All installtion was successful.The last step is Link Pending and errors come~~~~:"Error in invoking target toolsinstall of make file /soft/oracle/product/9.0.1.0.0/ldap/lib/ins_ldap.mk".
See the graphic:http://211.100.12.66/oracle.htmGo to www.oracle.com.
click on downloads in the upper right.
Select 8i Enterprise edition in the select product box.
select 8.1.7 for linux.
You should see the glibc patch on this page.
you will need a userid and password to the oracle technology network, but these are free if you do not have one.
Thanks
Don
Maybe you are looking for
-
How to get all the data stored on a table?
Hi. I'm tryng to get all the data stored on a database table but I'm losing in trouble. I've looked for a soloution to my problem in the forums but each post I follow related to this issue gives me a different way to solve the problem and no one work
-
Handling Special Character in SAP PI
Hi, I have a file to proxy scenario where I have used a complex UDF to get proper data at receiver side. Now, from the sender side I am getting some special characters in the files and due to this the whole file is getting failed with mapping error.
-
Check whether value in a field is odd or even
Hi folks, I have some value in a field 'count'. I want to check if the value in that field is even or not. I need to put a IF loop saying that if the value in 'count' is even then execute the loop. How can I do this. I appreciate the efficient method
-
Problems running DII client for consuming webservices
Hello webservices experts, am running into problems - when I try running my DII client for a webservice that I've successfully deployed on j2sdkee1.4. The exception goes like this java.rmi.RemoteException: JAXRPC.JAXRPCSERVLET.28: Missing port inform
-
Will BDC work in Background job
I have written the BDC program and i want to scheduled the program in Background job in the late night and see the result of processed records as a ALV report.Is it possible to run BDC as Background job..........