Oracle lite message file not loaded

Hi..
I'm not getting the proper error messages listed for the POI - error messages. It throws out "message file not loaded". do I have to run/update any scripts manually. please throw me some light

Hmmm...
is Your olite40.msb file missing somehow?
You need it since all error messages for the POL Error Numbers can be found in there.
I think it has to be in Your PATH.

Similar Messages

Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V

I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
but it it gets a "java stopped working error"
Thanks in advance
WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Server Error in '/test/helloworld' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 37:                     <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 38:                     <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 39:                     <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
Line 40:                     <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
Line 41:           </compilation>
Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
=== Pre-bind state information ===
LOG: User = IIS APPPOOL\DefaultAppPool
LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
(Fully-specified)
LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
gacuil output
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
\gacutil.exe /l Oracle.DataAccess
Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Edited by: burk_s on Jun 6, 2010 2:42 PM

Hi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

Parser Error Message: Could not load file or assembly 'DreamweaverCtrls

Hi,
After attempting to view my first asp.net page I was greeted
with the following error:
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: Could not load file or assembly
'DreamweaverCtrls, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one of its dependencies. The
system cannot find the file specified.
Source Error:
Line 1: <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM:Insert
Line 4: runat="server"
Source File: /s4/admin/wiki1/detail.aspx Line: 2
Assembly Load Trace: The following information can be
helpful to determine why the assembly 'DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a'
could not be loaded.
I have deployed the files using dreamweaver and it says "no
files to deploy". I have a bin folder with the correct .dll in it,
in the correct root folder. So whats happening??
Please help
Cheers
G

Are you testing on the server or locally. If the latter is
true make sure
that a copy of the controls is in a bin folder at the
C:\inetpub\wwwroot
level.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"graham6117" <[email protected]> wrote in
message
news:e2ngbc$sib$[email protected]..
> Hi,
>
> After attempting to view my first asp.net page I was
greeted with the
> following error:
>
> Parser Error
> Description: An error occurred during the parsing of a
resource required
> to
> service this request. Please review the following
specific parse error
> details
> and modify your source file appropriately.
>
> Parser Error Message: Could not load file or assembly
'DreamweaverCtrls,
> Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one
> of
> its dependencies. The system cannot find the file
specified.
>
> Source Error:
>
>
> Line 1: <%@ Page Language="VB"
ContentType="text/html"
> ResponseEncoding="iso-8859-1" %>
> Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
>
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,cultu
> re=neutral" %>
> Line 3: <MM:Insert
> Line 4: runat="server"
>
>
> Source File: /s4/admin/wiki1/detail.aspx Line: 2
>
> Assembly Load Trace: The following information can be
helpful to determine
> why
> the assembly 'DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral,
> PublicKeyToken=836f606ede05d46a' could not be loaded.
>
>
> I have deployed the files using dreamweaver and it says
"no files to
> deploy".
> I have a bin folder with the correct .dll in it, in the
correct root
> folder. So
> whats happening??
>
> Please help
>
> Cheers
>
> G
>

CS6 photoshop message 'could not load the fast core routines module because the file was not found'

my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it. my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.

I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...

Parser Error Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies,

Dear All,
I have installed Sharepoint Foundation 2010 in my server 2012 R2 machine. and I restore my existing content database backup into new site collections. and I'm trying to browse the site collection in window, the below error shown..
Parser Error
Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies.
<add assembly="Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
I tried to checked the assembly folder having the DLL or not. but its
not available in the C:\Windows\assembly location. and I'm tried to resolved this issue by HOTFIX. but unfortunately, I can't find out the patch file for MOSF 2010 in server 2012 r2.
Please help me on this issue. I'm very new to sharepoint...
Any help will be more appreciated.
Thanks,
Mubarak

Hi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Getting error message file not found unable to sync to ipod

90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD?

Installed FF. 8.1 and after reboot, tryed to start FF and got message "Could not load XRE functions.

I have been running I believe FF 6.3. I was getting nag popups to update FF. I went to help and used the selection there to up date. In doing so (more than once tryed this method) it would download and install like a usual update untill compleation. Then it would say Could not compleat update or Could not restart firefox because and instance is running. Close FF and try again. But there was no visiable FF running not even in Device Manager.
I will mention here that I did install Skype last week and have seen a couple of messages concerning Skype not loading on start up but seeing it running in the tool bar if this may have anything to do with it.
So looking for help at the FF site I saw recomended to DownLoad and install FF 8.1 so I did that. Then from Control Panel I uninstalled FF and rebooted and installed fresh leaving the old settings and bookmarks etc. Then rebooted again.
When I started FF 8.1 I now get a message "Could not load XRE Functions".
So remembering the last progy install on this box was Skype I went to the control panel and un installed it ---- and when I did, at the finish I got that same message "Could not load XRE Functions".---- Intresting---- hummmm but how do I get FF installed so I can get on with Life?
I just tried to verify this new account and got the same Couldnt Load message when I clicked on the email link for this forum.
Much Thanks in advance for anyones help.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How to fix CUPS corrupted (Dyld Error Message:   Library not loaded: /usr/lib/libcups.2.dylib)?

Hello,
After trying to change my printer settings on CUPS administrator area to allow to share my wirelless printer to my VirtualBox environment (somehow virtualbox doesn't detect my wirelless printer) I notice that this area stop to work. After it I try to update the CUPS by installing a new version. I admint that I am a newby in unix environment and I downloaded the CUPS v1.6.1 and installed through the terminal,
./configure
sudo make
make install
After restarting apple site no longer opened like also my home page. Other programs also stopped working and always warn about the same error described bellow. I posted my last try which was reinstall my system Snow Leopard (Mac OS X 10.6.8). Does anyone deal with this problem before? How can I reinstall at least the operation system or just fixing this library will solve the problem?
Note: The reason of using virtualbox is that I need to use a prescribed software that only works in windows environment and since I need to make work in other places the wireless printing is the only viable way to do this.
Process:
Install Mac OS X [58962]
Path:
/Volumes/Mac OS X Install DVD/Install Mac OS
X.app/Contents/MacOS/Install Mac OS X
Identifier:
com.apple.installassistant
Version:
Build Info:
InstallAssistant-480000~1
Code Type:
X86 (Native)
Parent Process: launchd [207]
Date/Time:
2013-02-11 01:18:18.198 +0000
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
48784 sec
Crashes Since Last Report:
10094
Per-App Crashes Since Last Report:   9
Anonymous UUID:
D1A4D697-3F20-4799-9396-A5CEDA61BC62
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libcups.2.dylib
Referenced from:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/P rintCore.framework/Versions/A/PrintCore
Reason: no suitable image found. Did find:
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???)
<4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core
2 Duo, 2.26 GHz, 2 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D),
Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 149,05 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403,
0x26500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.),
0x8213, 0x06110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.),
0x0237, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2and

Here is another option.
I had the same problem with my Mac OSX System 10.8.4 after update cups from 1.6.2 to 1.6.3.
I have a MacBookPro with the same system version and copy the libcups.2.dylib file form /usr/lib/ then replace the error file in my other Mac.
1. Install cups 1.6.2 again
2. Replace the file libcups.2.dylib in /usr/lib/ directory with this one libcups.2.dylib
Note: I added the link if you dont have an other mac in the same version available.
This works for me.

Error message "Library not loaded"

I had a new (and larger) disk drive installed in my MacBook Pro, and all the files were copied over. Yet, when I try to open iPhoto, it gives error message that library is not loaded and it will not open (full error msg below). Yet, when I go to the Pictures folder, the iPhoto library is right there. I tried getting rid of the preferences file and that did not help me start up iPhoto. I was also not able to start up iPhoto with the option key so I could reconnect the library.
Suggestions would be welcomed.
Full error message:
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found

doesn't works !
Process: iPhoto [695]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4190000~4
Code Type: X86 (Native)
Parent Process: launchd [579]
Date/Time: 2010-03-28 08:12:33.656 +0200
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 87811 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 13
Anonymous UUID: D2E16F70-7B07-4C41-8B57-128B725F3AF9
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit
Referenced from: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer
Reason: no suitable image found. Did find:
/System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit: unknown file type, first eight bytes: 0x4B 0x95 0x0A 0x03 0x14 0x03 0x9B 0xAB
/System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit: unknown file type, first eight bytes: 0x4B 0x95 0x0A 0x03 0x14 0x03 0x9B 0xAB
I think the Framework is gone ...
there are only 21 framewoks in the folder.

Imported Jar file not loaded at run time ORA-105100

Oracle 9iDS forms Version 9.0.2.9.0
Oracle 9iAS Release 2
I have imported java classes from a jar file into my form. I have it working in client server. Added the entries to the classpath in the default.env and system environment variable for development of the form and for execution.
Moved the jar file, form and testing html to the application server. Modified the classpath in the default.env file. Tested the form. Got the ORA-105100 error. MetaLink note 261650.1 states that error frm-40735 When-Button-Pressed triger raised exception ORA-105100 if calling a java function from a jar file. Cause: Jar file not loaded at run time. Solution: add in your default.env CLASSPATH parameter your jar file including the whole directory of the jar file location. That has been done and the OC4J has been restarted. Still get error.
Oracle support has not been able to give me much help as of yet. Does anyone have any further ideas, or documentation that I can read to help get this working?
Thanks in advance for any assistance that is offered.

Hey people any clues?

Has anyone seen this Dyld Error Message: Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto Reason: image not found

Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found

Yes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD

Class File Not Loaded (MainJNI)

I am Calling .FMX file in my HTML code
but i found error that they not load
oracle.forms.engine.MainJNI not loaded but i defined the classpath varaible.
What Should be the steps.

oh and it is not swing ...jdk 1.4 only using AWT

Bridge Messages will not load messages after 1.0.6.2390 upgrade

After I updated to 2390, messages will not load, after about 5 minutes it will display content of last message but left side message list will not populate. I just keep giving me the GREEN CIRCLE WAITING and will not load messages. This is the first time I've had any problems with bridge messages. All the other bridge apps (calendar, notes, contacts, bridge browser) all work. I un-installed bridge from my phone (ver 1.0.0.93) and re-installed it, still no luck. I re-booted PB, no luck. Is anybody else having a bridge message problem since 1.0.6.2390 update.

tboyd wrote:
Knottyrope, I deleted all bluetooth profiles, phone and PB, did battery pull on phone, playbook reset. paired phone with PB and after 8 minutes I can see the header of 1 email message and under the All messages list on left side it is blank and the GREEN CIRCLE of WAITING is still spinning.
Calender works, contacts works, Bridge browser works, bridge files works, but bridge messages will not load.
I never had any problem with bridge messages working through all the previous OS upgrades.
If you did all of that, then maybe there is an issue we cant help with, please call support to get your PlayBook logs, so RIM can address it in a future release or maybe they have a fix we dont know about.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

Oracle lite message file not loaded

Similar Messages

Maybe you are looking for