Oracle Lite Minimal Footprint

I am installing Oracle lite onto a laptop and need to have the smallest footprint possible. I know that I can remove many components of a regular install such as the documentation, but I would like to install only the components that are needed. I am creating a table on the client and am not syncronizing with the server. I am running a java application. Any suggestions would be appreciated.

What about it?

Similar Messages

Oracle Lite vs Oracle XE

What's the different between "Oracle Lite Edition" and "Oracle Express Edition"?
Please give me comparison table with Data Volume, Memory, No of users, License and other key features..

They are two different code lines. Oracle Database XE is based on the Oracle Database 10g Release 2 Code line and as such supports the SQL and PL/SQL dialects, and standard data types found in Oracle. Oracle Lite has a different code line, albeit with similar data types, similar SQL dialects, but no PL/SQL.
Oracle Lite is a very small footprint database - around 6 Mb I believe. It runs on Windows/Linux and also some OS on smaller devices, such as phones and PDAs. Oracle Database XE has a larger footprint (considerably) and will not run on phones and PDAs.
Oracle Lite is multi-user, but is mainly designed for disconnected mobile applications, where the device/machine synchronizes a subset of data with the main Oracle Database. Oracle XE is multi-user, and can also replicate data to and from a 'main' Oracle Database.
Unfortunately I don't have time to get into a full feature by feature comparison. We will do soemthing like this for production however, as it's sure to be an FAQ. In the meantime, if you told us what your considerations are I could provide some insight into which would be the better solution.

Oracle apps configuration required to install oracle lite database

Hi,
Can any one suggest me the oracle apps setups and configuration required for installing the oracle lite databse in my laptop.
The olite databse must sink with my existing oracle apps.
thanks in advance...

user596857 wrote:
Dear Experts, (I'm far from expert, but I possess enough shreds of knowledge to answer your question, so here goes. ;-) )
1a)
My server has Oracle version 11.1.0.6.0, but the matrix says it wants 11.1.0.7.
I should get a warning right?
Can I just proceed with the install, over-riding the warning?
1b)
If so, what is the procedure to install into the existing database?
It wasn't obvious in the (150 page) install docs. The EBS install delivers its own ORACLE_HOME for the database. There isn't an option to install into an existing database as far I know. The installer will ask where to put the new ORACLE_HOME for the EBS database. You might get a warning if you try to install to a pre-existing ORACLE_HOME, and I don't recommend ignoring that warning. The result will either be ugly immediately or, even worse, ugly later when it's harder to figure out why. ;-)
Do an upgrade?Won't really help. The ORACLE_HOME that's bundled with the installer usually comes with additional patches pre-installed, as well as EBS-friendly configuration options. You're much better off taking what it gives you so you can get down to the real fun of learning EBS. :-)
Or, do regular install, but not Express/Rapid Install?I recommend doing a Vision install for learning EBS.
Can I choose not to install the database software?Nope (unless my memory is really that bad), and there's no real benefit to doing so. All you'd save is a couple GB of disk, and as a percentage of the total install footprint of EBS, the database ORACLE_HOME is relatively tiny.
Regards,
John P.
http://only4left.jpiwowar.com

Is oracle lite free or is there any license for Oracle Lite 10g for product

Is oracle lite free or is there any license for Oracle Lite 10g for production use ??
-Thanks-

Please note that Oracle Lite is no longer being actively developed, and no further releases are planned. The recommended small footprint database from Oracle is Berkeley DB.
http://www.oracle.com/technetwork/products/berkeleydb/overview/index-085366.html
Eric

Strange oracle lite error when create db

i am new to oracle lite and been playing about but this error really confuses me
C:\>createdb mydb mydb doug
Oracle Lite CREATEDB Version 10.2.0.1.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Database C:\ORACLE\10GLITE\MOBILE\SDK\OLDB40\MYDB.odb created (VolID = 507).
C:\>msql system/doug@jdbc:polite:mydb
Oracle Lite MSQL Version 10.2.0.1.0
Copyright (c) 1997, 2005, Oracle. All rights reserved.
[POL-3023] the database does not exist
so it says it creates the db fine but wont let me connect

Check whether there is a corresponding entry made for that DSN in your odbc.ini
If no, make an entry in that file and then try connecting.
Minimally it should consist of something like this... ( for createdb oracle oracle oracle)
[ODBC 32 bit Data Sources]
oracle=Oracle Lite 40 ODBC Driver (32 bit)
[oracle]
Description=Oracle Lite 40 Data Source
DataDirectory=/private/orainst/MDK/mobile/sdk/oldb40
Database=oracle
-vv
null

Oracle Lite vs. MobiLink DB synchronisation

Hi all
I have the task to analyse several synchronisation solutions on the
market. The analysis will play an important part in the decision for
which solution a quite big company will go for when building mobile
applications.
Up to know I manly focused on Oracle Lite and MobiLink.
I am sure that some of you guys did the same analysis. May you can give
me some good and important facts I have to take into consideration in
the analysis.
thx for any useful hints.
cheers,
Michel
Message was edited by:
Michel77

Michel,
Having an Oracle enterprise database is an important first step. It'd be harder to choose Oracle Lite over MobiLink if you also had to be convinced to switch to Oracle in the backend.
A second important comparison IMO is the client database and application development tools (prior to analyzing the synchronization technologies themselves). Both products only support their own client databases (MobiLink and SQL Anywhere/UltraLite or OLite Mobile Server and client database). I'd start by evaluating the client database in each case to ensure it matches with your requirements. Items to consider are:
- Target platform support
- Datatype requirements
- Footprint requirements
- Logic requirements
- Driver support
- other items important to you
I think another important item to review before evaluating the synchronization process itself is the tools involved for building and deploying your application. If the site that will build and deploy the application is already familiar with many Oracle tools such as App Server, OC4J, etc. they may find Oracle Lite a much more familiar environment to work within, which could be a sufficient benefit in time to develop and deploy the application.
In comparing synchronization, I think you'll find both tools have the same basic features. You might consider a few of these items to compare the technologies:
1) Performance - this might be hard to measure without planning and developing a few test scripts. For a full sync, the upload, apply, download phases in MobiLink are synchronous; each one relying on the completion of the prior to move on in the synchronization process. Oracle Lite's methodology is asynchronous. Your client modifications are uploaded/downloaded from a queue, which in turn works to apply and compose changes from and into the Oracle. This means your client is not forced to wait for upload transactions to commit to Oracle before it can continue with downloading its changes. On a small scale (numbers of users, small amount of data, infrequent transactions to Oracle), the difference in this methodoloy will not display much in terms of performance impact. If you plan to scale up or out, or are working with a very busy Oracle database, you'll find Oracle Lite's methodology will scale better.
2) Remote administration: It's worth checking into the functionality each product provides to remotely administer the client database. Consider basic use case scenarios now and in the future that might require remote administration and compare the tools each provides to accomplish.
3) Integration with Oracle: Mapping the differences for Oracle specific features (sequences, etc) is often important.
4) Consider how the two products handle an interruption of a user synchronization, which can be especially important if you are synchronizing large sets of data.
5) Check how to manage conflicts and errors in each product and see how that works for your particular use cases. The nuances and application of this is different for each product.
This should help you get started. I'll post some additional thoughts if they come to me.
HTH
Gabe

Oracle Lite + Resin + jdk1.2.2 or jdk 1.3.1 problem

Hi!
Can some one help me this the following:
I used Oracle Lite database, Resin app server and jdk1.2.2
When I try to connect my database through simple java-application, all goes fine! But, when I trying to get database communication from my application server and problem arise. First of all dll's such as
OLJDBC40.DLL, OLAD2040.DLL, OLOBJ40.DLL, OLOD2040.DLL OLSQL40.DLL are in the Path and JVM loads them at runtime. I got connection to DB. Than I try to get some DatabaseMetaData info and got EXCEPTION_ACCESS_VIOLATION (for jdk1.3) and "java.exe has generated error (for jdk1.2.2)" errors from VM.
So, any idea?
Any help apriciated...
RGS,
parasolko

Hi,
I have got the similar problem when I used MS SQL server + Tomcat + JDK1.3.0 via JdbcOdbc driver. In that configuration the JVM crashs very often. It seems that JdbcOdbc's got unstable problem. Then, I tried other type 4 JDBC driver, it works fine and JVM won't crash. Try Sprinta 2000 JDBC driver, it's a type 4 driver and fast stable.
Ma

Oracle Lite and Oracle 8i Client on Win98

I've had Olite v8i running on my Win98 machine for a while now. I just installed Oracle 8i Client on my machine. Now, my JDBC driver for Oracle Lite does NOT work. What could have happened here??
Thanks.
-Jeremy
null

HI Jeremy,
I think, Your PATH was cranked up.
The JDBC driver for OLite normally does not use any OCI DLLs, so that should not be the problem. As I said, the OLite dlls may be missing now from the PATH.
Any error messages? "Does not work" is a bit... fuzzy.

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

How to create a table in Oracle Lite database?

Hi,
I have installed SOA 10.1.3 on my laptop. Now I am trying to create a table in the database to do some own examples. I have problem in installing oracle database. So I am trying to create a table in Oracle Lite database which comes with SOA suite. I am not able to do it, can some body suggest me please?
Regards
Khaleel

HI James,
Thank you so much. I am able to create table and insert rows and able to select them too. However I am not able to use these tables in my BPEL process for my practice. The DB adapter is throwing some error, any idea?
--khaleel

Error while trying access JSP page first time using Oracle Lite

Hi,
We are doing a proof of concept using Oracle Lite 10gR3. Installed Mobile server and published a JSP based application. Installed web-to-go setup.exe on a client machine and synchronized the application. However when we tried to open the page, it comes up with an error. We are using jdk version 1.4. Any advise will be highly appreciated. Thanks.
Error message:
Requested URL:/webtogo/18Mar1/MyIndex.jsp
Exception: oracle.classloader.util.AnnotatedClassFormatError:_MyIndex (Unsupported major.minor version 49.)
Invalid Class: _MyIndex
Loader:mobileclient.web.18Mar1.jsp22486527:0.0.0
Code-Source: /C:/MyInstallation/mobile_client_oc4j/j2ee/mobileclient/application-deployments/mobileclient/18Mar1/persistence/_pages/
Configuration: *.jsp in C:\MyInstallation\mobile_client_oc4j\j2ee\mobileclient\application-deployments\mobileclient\18Mar1\persistence\_pages
Dependent Class: oracle.jsp.runtimev2.JspPageInfo
Loader: oc4j:10.1.3
Code-Source: /C:/MyInstallation/mobile_client_oc4j/j2ee/mobileclient/lib/ojsp.jar
Configuration: <code-source> in META-INF/boot.xml in C:\MyInstallation\mobile_client_oc4j\j2ee\mobileclient\oc4j.jar
This class was compiled for a newer version of the JRE. Expected version 48.0, found 49.0

(Since this is the general forum for the 'big' database, my advice would be to ask in the Oracle Lite forum. Database Mobile Server (inc. legacy Database Lite)
If this is a formal evaluation, you could also get a Sales-sponsored trial which usually comes with 30-90 days of Metalink support. You would be able to search for notes like Doc 414106.1
Bottom line is that the code is for JDK 1.5 and it's being deployed against JDK 1.4.2. Something needs to be either upgraded or downgraded.

Unable to install Oracle Lite 10g on Windows 7 64-bit

I've tried installing Oracle Lite 10g on my Windows 7 64-bit computer but I get a message saying "JDK is not installed on machine". I even have Java installed on my computer too.
Any ideas what could be causing the issue?
Thanks
Gareth

Oracle lite 10g is not supported on Windows 7. The core issue is you are running on an unsupported platform.
You have may have to go in the docs and figure out what JDKs were supported, i think 1.4 and 1.5. and try
installing one of those and maybe you can get uninstall to work. This is just a guess though.
thanks
mike

Install on vista with Oracle Lite Multiuser Service - SERVICE_START_PENDIN

Hi all,
I'm trying to install app server 10.1.3 on Vista, but on Configuration assistant screen, it stops at BPEL process manager configuration manager ,
error in oraInstall.err:
C:\Users\victoria\AppData\Local\Temp>echo updating ODBC.ini
updating ODBC.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating ODBCINST.ini
updating ODBCINST.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating POLITE.ini
updating POLITE.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>exit
Oracle JAAS [Mon May 18 08:36:05 GMT 2009] admin password is changed successfully
opmnctl: starting opmn and all managed processes...
OliteService reports the following status:
The service is installed.
OliteService reports the following status:
The service start pending.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_START_PENDING
Acceptable Control Code : (0x0)
installaction.log:
BUILD SUCCESSFUL
Total time: 3 minutes 35 seconds
C:\product\10.1.3.1\OracleAS_1\bpel\samples>ENDLOCAL
BUILD SUCCESSFUL
Total time: 4 minutes 43 seconds
Exit: 0
TASK: oracle.tip.install.tasks.UpdateConfigFiles
Updating configuration files ...
Exit: 0
TASK: oracle.tip.install.tasks.RegisterOlite
Registering Olite ...
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OB_HOME=C:\product\10.1.3.1\OracleAS_1\bpel
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_LIB=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_BIN=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set PATH=C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\oracle\product\10.2.0\db_1\bin;C:\app\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\server
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set CLASSPATH=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olite40.jar;C:\product\10.1.3.1\OracleAS_1\MOBILE\Sdk\bin\OLITE40.JAR;
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /stop
OliteService reports the following status:
The service stop is pending.
OliteService reports the following status:
The service is stopped.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_STOPPED
Acceptable Control Code : (0x0)
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /remove
OliteService reports the following status:
The service is removed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /install
OliteService reports the following status:
The service is installed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /start
OliteService reports the following status:
The service start pending.
OliteService reports the following status:
The service is running...
port = 1531
wdir = C:\Windows\system32
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_RUNNING
Acceptable Control Code : (0x1) SERVICE_ACCEPT_STOP
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>mkdir "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>del /f "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>"C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\createdb.exe" orabpel "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb" manager
Database C:\PRODUCT\10.1.3.1\ORACLEAS_1\BPEL\SYSTEM\DATABASE\OLITE\ORABPEL.odb created (VolID = 1736).
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>exit 0
Could Not Find C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb
Oracle Lite CREATEDB Version 10.2.0.2.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Exit: 0
TASK: oracle.tip.install.tasks.DeployApps
Deploy applications and adapters
Port value is 6003
Buildfile: bpminstall.xml
init-midtier:
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://victoria-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_admin_client_script_sl.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
update_server.xml:
restart.container:
Stopping home container ...
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
no processes or applications matched this request
Restarting home container ...
opmnctl: starting opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
0 of 1 processes started.
ias-instance id=oapp1013.victoria-PC
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=503452990,pid=3000)
failed to start a managed process after the maximum retry limit
Log:
C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
init-midtier:
Setting up the dehydration store [olite]...
dehydrationStore:
Configuring data sources for olite dehydration store ...
Deploying ORABPEL Applications...
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Updating jar: C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://my-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Please advise what's wrong?
thanks
andrew

The following procedure describes the steps required to deploy the DbAdapter.rar file using admin_client.jar:
1. Copy the following libraries from server.xml in an OC4J_SOA container to a server.xml file for a new
container:
oracle.bpel.common
apache.junit
oracle.db.lite
apache.commons
apache.jdom
apache.slide
For example, for oracle.bpel.common, copy the following extract from one server.xml to another and
do the same for all other libraries:
<shared-library name="oracle.bpel.common" version="10.1.3">
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/classes"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-thirdparty.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bpm-infra.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/connector15.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-exts.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-ant.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/ant_1.6.5.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bipres.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bicmn.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/uix2.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/jewt4.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/regexp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/share.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jdk/lib/tools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/ldapjclnt10.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/schema"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/config"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/bpm-services.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wfapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/fndctx.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/phaos.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/pushapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/oracle_http_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_api_v3.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/wasp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_core.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/saaj.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxm.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/builtin_serialization.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/core_services_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxrpc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rl.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rulesdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/webdavrc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/jr_dav.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/webservices/lib/wsif.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/oraesb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/bpm-ide-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rdbms/jlib/xdb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/ide.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/javatools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/xmleditor.jar"/>
<import-shared-library name="oracle.dms"/>
<import-shared-library name="oracle.jdbc"/>
<import-shared-library name="oracle.xml"/>
<import-shared-library name="oracle.jwsdl"/>
<import-shared-library name="soap"/>
<import-shared-library name="oracle.ws.client"/>
<import-shared-library name="oracle.toplink"/>
<import-shared-library name="apache.junit"/>
<import-shared-library name="oracle.db.lite"/>
<import-shared-library name="apache.commons.logging"/>
<import-shared-library name="oracle.cache"/>
<import-shared-library name="apache.commons"/>
<import-shared-library name="apache.slide"/>
<import-shared-library name="apache.jdom"/>
</shared-library>
2. Restart the container to make sure that server.xml was updated correctly.
3. From the configtools.log file find the opmn port number, for example:
deployer:oc4j:opmn://dimak.au.oracle.com:6012/home
dimak.au.oracle.com - is the machine name and
6012 - port number
4. Launch a new command prompt
and set path and classpath, for example:
set PATH=$ORACLE_HOME\jdk\bin;%PATH%
set classpath=.
where in the classpath there is only one entry - the dot, which stands for the current directory.
5. change directory to the following:
$ORACLE_HOME\j2ee\home
and run the following command (written all on one line) to deploy the DbAdapter:
java -jar admin_client.jar deployer:oc4j:opmn://dimak.au.oracle.com:6012/test oc4jadmin
manager1 -deploy -file $ORACLE_HOME\integration\esb\lib\DBAdapter.rar -deploymentName
DbAdapter2 -parent default
where
* dimak.au.oracle.com should be substituted with your machine name
* 6012 should be substituted with your port which you found in step 3
* test is the name of the container you want to deploy the adapter to
* manager1 should be substituted with your oc4jadmin password
* $ORACLE_HOME\integration\esb\lib\DBAdapter.rar is the location of the DBAdapter.rar file
* deploymentName DbAdapter2 - should be different from DbAdapter, as that name is already used in the OC4J_SOA container.

Converting between tables in an Oracle Lite Database

We have a standalone application that uses Oracle Lite. A requirement we have from a new customer is to use their Oracle Lite database structure or to come up with a mechanism that sends the data between the 2 different structures.
Both the structures reside in the same database.
Initial thoughts were to write triggers on both structures that convert the data or to use XML / XSL and treat them as seperate apps.
However, I'm wondering if there is a different way. Do Oracle provide any tools that can help with mapping between 2 different structures that hold the same domain data?
Anyone got any better ideas?
Cheers, Matt

We have a standalone application that uses Oracle Lite. A requirement we have from a new customer is to use their Oracle Lite database structure or to come up with a mechanism that sends the data between the 2 different structures.
Both the structures reside in the same database.
Initial thoughts were to write triggers on both structures that convert the data or to use XML / XSL and treat them as seperate apps.
However, I'm wondering if there is a different way. Do Oracle provide any tools that can help with mapping between 2 different structures that hold the same domain data?
Anyone got any better ideas?
Cheers, Matt

Oracle Lite 10.3.0: how to find out the consumed size of a BLOB column

Hi,
we are developing an app that utilizes an Oracle Lite database and so far I have just been unable to find a reasonable way to determine the size of stored binary data.
All the "usual" ways we aware of from "main" Oracle just don't seem to work with OLIte (ie SELECT dbms_lob.getlength(file_data) from APPS.CSL_LOBS) so how does one find out the size of blob objects?
Thanks in advance

Assuming BLOBs are not stored in-line:
SQL> desc pm.print_media
Name                                      Null?    Type
PRODUCT_ID                                NOT NULL NUMBER(6)
AD_ID                                     NOT NULL NUMBER(6)
AD_COMPOSITE                                       BLOB
AD_SOURCETEXT                                      CLOB
AD_FINALTEXT                                       CLOB
AD_FLTEXTN                                         NCLOB
AD_TEXTDOCS_NTAB                                   PM.TEXTDOC_TAB
AD_PHOTO                                           BLOB
AD_GRAPHIC                                         BINARY FILE LOB
AD_HEADER                                          PM.ADHEADER_TYP
SQL> select segment_name,
2          index_name
3    from dba_lobs
4    where owner = 'PM'
5    and table_name = 'PRINT_MEDIA'
6    and column_name = 'AD_COMPOSITE'
7 /
SEGMENT_NAME                   INDEX_NAME
SYS_LOB0000051988C00003$$      SYS_IL0000051988C00003$$
SQL> select sum(bytes)
2    from dba_segments
3    where owner = 'PM'
4      and segment_name in (
5                           'SYS_LOB0000051988C00003$$',
6                           'SYS_IL0000051988C00003$$'
7                          )
8 /
SUM(BYTES)
    262144
SQL> SY.

Oracle Lite Minimal Footprint

Similar Messages

Maybe you are looking for