Oracle MessageQ Solaris 10 64 bit x86_64

Is MessageQ available for Solaris 10 x86 64 bit? if so where can I download it, I checked edelivery.oracle.com, but could only find the 32 bit version.

No, currently MessageQ does not support Solaris 10 x86 64 bit yet. If you need the support on this platform, please concact the support engineer to raise this request to us.
Regards,
Leo

Similar Messages

  • Oracle 11g Solaris 10 (64-Bit) Release Date

    When will this be available and I am very interested in the Beta program.
    Thanks,
    Arnold

    An interest in participating in the Beta program should have been communicated to your Oracle rep 6-12 months ago.
    When it will be released is when it is ready. No one can or will say.
    If you wish to become familiar with it then download the Linux version, the only one available, and you will find demos of new functionality in Morgan's Library at www.psoug.org.

  • Install - Oracle 9i 64 bit on Solaris 9 32 bit

    Hi Team,
    Is it possible to install Oracle 9i 64 bit version on Solaris 9 32 bit OS?
    Thanks in advance.
    Regards
    M.Saravanan

    Hi.
    This is the same question as "Is it possible copy 20GB of data to 10GB hard disk?".
    Of course it is not possible.

  • Install error for Oracle 10g on Solaris x86 64-bit.  NETCA won't run

    Hi All,
    I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
    thanks, dave
    ERROR FILE:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xFEEF24E8
    Function=strchr+0x8
    Library=/lib/libc.so.1
    Current Java thread:
         at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
         at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
         at oracle.net.ca.InitialSetup.<init>(Unknown Source)
         at oracle.net.ca.NetCA.main(Unknown Source)
    Dynamic libraries:
    0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
    0xfefc0000      /lib/libthread.so.1
    0xfefd0000      /lib/libdl.so.1
    0xfeed0000      /lib/libc.so.1
    0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
    0xfee80000      /usr/lib/libCrun.so.1
    0xfee50000      /lib/libsocket.so.1
    0xfedc0000      /lib/libnsl.so.1
    0xfeda0000      /lib/libm.so.1
    0xfeeb0000      /usr/lib/libsched.so.1
    0xfe9a0000      /lib/libm.so.2
    0xfed50000      /lib/libscf.so.1
    0xfe980000      /lib/libdoor.so.1
    0xfe960000      /lib/libuutil.so.1
    0xfe940000      /lib/libmd5.so.1
    0xfe920000      /lib/libmp.so.2
    0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
    0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
    0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
    0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
    0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
    0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
    0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
    0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
    0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
    0xf0d50000      /usr/dt/lib/libXm.so.4
    0xf0cf0000      /usr/openwin/lib/libXt.so.4
    0xf0cc0000      /usr/openwin/lib/libXext.so.0
    0xf1890000      /usr/openwin/lib/libXtst.so.1
    0xf0c30000      /usr/openwin/lib/libX11.so.4
    0xf0be0000      /usr/openwin/lib/libdps.so.5
    0xf0a90000      /usr/openwin/lib/libSM.so.6
    0xf0a70000      /usr/openwin/lib/libICE.so.6
    0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
    0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
    0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
    0xf0a10000      /lib/libkstat.so.1
    0xefc40000      /lib/libgen.so.1
    0xefc20000      /lib/librt.so.1
    0xefbf0000      /lib/libaio.so.1
    0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
    eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
    from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
    to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
    tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
    the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
    compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
    the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
    Local Time = Tue Aug 29 13:49:22 2006
    Elapsed Time = 225
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
    #

    I have the same problem on Linux Debian 3.0.
    My /etc/hosts looks like:
    127.0.0.1     localhost.localdomain     localhost
    #192.168.100.1     bt.lan.home     bt
    #192.168.100.5     jacek.lan.home     jacek
    # The following lines are desirable for IPv6 capable hosts
    ::1     ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhostsPlease help.

  • How to upgrade oracle 32 to 64 bit on sun solaris x86 64 bit OS?

    Hi,
    I want to upgrade/convert 32 bit Oracle Database 10.2.0.2 to 64 bit database. Existing 32 bit database is RAC and it is running on Sun Solaris X86 64 bit OS.
    First, I want to know is it possible?
    If yes, then what are the exact steps?

    Hi,
    Such a migration can be done, just follow the steps in Metalink note 62290.1
    It is important to remember that 64-bit database requires more shared pool memory so you should increase your shared pool size.
    Liron Amitzi
    Senior DBA consultant
    [www.dbsnaps.com]
    [www.orbiumsoftware.com]
    Edited by: Liron Amitzi on Jul 1, 2009 3:08 PM

  • Oracle 9i 32 bit in Solaris 9 64 bits

    can anyone tell me what is the Maximum SGA size i can set for Oracle database 9i 32 bit running in Solaris 9 64 bits?
    Oracle version : Oracle Enterprise Edition 9.2.0.1 32-bits
    OS: Solaris 9 64 bits.
    16GB RAM

    user4738409 wrote:
    can anyone tell me what is the Maximum SGA size i can set for Oracle database 9i 32 bit running in Solaris 9 64 bits?
    Oracle version : Oracle Enterprise Edition 9.2.0.1 32-bits
    OS: Solaris 9 64 bits.
    16GB RAMrefer:http://www.dbmonster.com/Uwe/Forum.aspx/oracle-server/8028/Max-SGA-size-for-32-bit-9-2-0-6-on-Solaris
    this may help you,
    regards,

  • Reg: Oracle 9i Enterprise Edition software for solaris x86 (32-bit)

    Hi,
    Where can i download the Oracle 9i Enterprise Edition software for solaris x86 (32-bit).
    Thanks in advance.
    Edited by: ora_man_8873786 on May 14, 2011 12:50 AM

    If you have a CSI you can always order the CD at My Oracle Support by submitting a SR.
    Sybrand Bakker
    Senior Oracle DBA

  • How to patch 10.2.0.1 to 10.2.0.5 on oracle Solaris spark 64 bit

    Dear All,
    DB version - 10.2.0.1 enterprise edition
    os - oracle Solaris spark 64 bit
    We want to patch the above mentioned DB version to 10.2.0.5 so that we can have the repository database of oracle enterprise manager 12.1.0.4
    While looking for pre upgrade check we found.
    SQL> @utlu102i.sql
    Oracle Database 10.2 Upgrade Information Utility    09-02-2014 19:07:43
    Database:
    --> name:       RNDDB
    --> version:    10.2.0.1.0
    --> compatible: 10.2.0.1.0
    Database already upgraded; to rerun upgrade use rdbms/admin/catupgrd.sql.
    PL/SQL procedure successfully completed.
    So, My question is is it possible to upgrade/patch the above version to 10.2.0.5 and if yes can you please post the steps here .
    Like the patch no which I can apply or any other way.
    With Regards
    Nimai Karmakar

    Hi
    You need to download 10.2.0.5 patchset via patch 8202632 and Install the 10.2.0.5.0 patchset on top of  existing 10.2.0.X.0 ORACLE_HOME
    And Finish the post installation steps as per the patchset README
    Note: Please backup DB and oracle binary prior to activity.
    Thank you
    Chandra

  • Oracle patch 9.2.0.5 for Solaris 8 64 bit

    Hi guys,
    would anyone know if there is a patch 9.2.0.5 available for oracle database 9.2.0.1 on Solaris 8 64 bit.? I know there is 9.2.0.6 but wanted to check for 9.2.0.5. If so could you let me know where I can download it from as I don't seem to find it on the archives in Oracle.com.
    Thanks in advance

    find it on metalink.oracle.com.u need username/password.
    this service is not free and You have to pay extra for using this service.

  • Question for using ORACLE with SOLARIS

    Hi Experts,
    I have worked Oracle with Linux in one of my projects 2yrs back and i was just a developer, used to write SQL Query, Creating Table and Objects.
    Now i got a question from TL which is
    Tell me about consequences for using Oracle with Solaris?
    I am not worked ORACLE with SOLARIS, Can some one give me the answer for this question with
    1. Difference between ORACLE with LINUX and ORACLE with SOLARIS.
    2. Advantages and Disadvantages Between ORACLE with LINUX and ORACLE with SOLARIS.
    Thanks,
    MuraliDharan V

    Hi MuraliDharan V,
    It would had been better if you had searched first;
    Here is one
    Advantage for Linux64-bit Versus Solaris-x86_64 OS in RAC
    And beside that your question is incomplete:
    -What Oracle? Database, etc
    -Which Version? 9i, 10g, etc
    Aside from that a simple search on google might have answered your question as well.
    But I think there is some new trend of dumping questions here before searching.
    Ex Senior DBA

  • Tuxedo 8.0 32-bit on Solaris 8 64-bit ( boot-mode)

    Hi:
    i have questions :
    I have Tuxedo 8.0 32-bit product, i'll need run on solaris 8
    ( 64-bit boot-mode ) .
    Is there Problems wiht that???
    My hardware is :
    Sun Microsystems sun4u
    Sun Enterprise 420R (2 X UltraSPARC-II 450MHz)
    System clock frequency: 113 MHz
    Memory size: 2048 Megabytes
    ========================= CPUs =========================
    Run Ecache CPU CPU
    Brd CPU Module MHz MB Impl. Mask
    0 1 1 450 4.0 US-II 10.0
    0 2 2 450 4.0 US-II 10.0
    mymachine#isainfo -v
    64-bit sparcv9 applications
    32-bit sparc applications
    thanks ...
    Alex ...

    Hi Anthony :
    Do you know something about performace between
    Tuxedo 32-bit and Tuxedo 64-bit ?
    Thanks ...
    Alex ...
    Do you working in Bea or other Enterprise ??
    "Anthony Fryer" <[email protected]> wrote:
    >
    Hi Alex, we are also using tuxedo 32-bit on Solaris 64-bit operating
    system. There
    is no problem doing this as your solaris version supports both 32 bit
    and 64 bit
    programs. The things to watch out for are when you are building a tuxedo
    application,
    you have to make sure that all the libraries you link with are also 32
    bit libraries,
    including oracle. We ran into build problems when some libraries were
    32 bit
    and others were 64 bit.
    There's good information about 32bit v 64bit on solaris at the following
    web site...
    http://docs.sun.com/?p=/doc/806-6543/6jffrdmee&a=view
    I personally would use 64bit if possible, but it's no big deal to build
    32 bit
    applications because my tuxedo application does not need a 64bit address
    space
    and is not computationally heavy. Most of the CPU takes place in the
    database,
    which in our case is Oracle, and which happens to be 64bit anyway. So
    it's not
    a bad thing to build a 32 bit tuxedo application that runs on a 64 bit
    operating
    system, for most types of tuxedo applications.
    "alex fuentes" <[email protected]> wrote:
    Hi again :
    you link show that :
    Sun Solaris 8 tuxedo v8.0 Native 64-bit version - SPARC
    Sun Solaris 8 SPARC X *(using 2.7 32-bit binaries)
    32-bit on 64-bit OS supported
    Then Tuxedo 8.0 32.bit ruuning on Solaris 8 64-bit. OK
    there is support from Bea . Is that is correct ???
    I'll need used Tuxedo 64-bit ,you could benefit in performance.
    Thanks Thanks ...
    Alex ..
    Scott Orshan <[email protected]> wrote:
    If the platform list shows that a 32-bit build is certified on a 64bit
    OS, then you can run it there.
    If you want an actual 64 bit build, it is because you want the big
    address space, longer longs in FML, and everything else you get from
    64
    bits.
    If you want to have an application span Solaris and Digital UNIX, which
    is always 64 bit, you might want both to be 64 bits so that you do
    not
    lose any data in the conversion.
    On HP, you can't link 32-bit Tuxedo with another product that is 64-bit
    (Oracle for example). You might need a 64 bit Tuxedo in order to work
    with other products.
         Scott Orshan
    alex fuentes wrote:
    HI :
    I have Tuxedo 8.0 32-bit for solaris, my questions is :
    Is there problems whith Tuxedo 8.0 32-bit running on Solaris 8 alsorunning 64-bit
    ( boot-mode )?
    there is a Tuxedo 8.0 64-bit Why ??
    Which different between Tuxedo 8.0 32-bit and 64-bit ??
    Thanks ....
    Alex ..

  • 32 bit Oracle server installation on 64-bit Linux box

    Hi All,
    I would like to know if it is suggested to install 32 bit oracle software on a 64 bit Linux box.
    Details of our new DB box below:
    $ cat /etc/SuSE-release
    SUSE LINUX Enterprise Server 9 (x86_64)
    VERSION = 9
    PATCHLEVEL = 4
    $ free -m
    total used free shared buffers cached
    Mem: 48293 33114 15179 0 412 31496
    -/+ buffers/cache: 1205 47088
    Swap: 65535 0 65535
    $ grep -i name /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    model name : Intel(R) Xeon(R) CPU X5355 @ 2.66GHz
    $ uname -a
    Linux stllin06 2.6.5-7.311-smp #1 SMP Mon Mar 10 13:12:16 UTC 2008 x86_64 x86_64 x86_64 GNU/Linux
    Oracle : Oracle server Enterprise Edition 9.2.0.8
    We need this setup to match the other two 32bit linux DB server boxes so that we can use DB cloning and Transportable Tablespace feautres between these three linux machines.
    Thanks in advance for your help.
    PS: I did raise a request to support and waiting for the update.
    Thanks,
    Krishna Bussu

    Thanks Girish. But all my findings says NO NO and NO.
    From http://www.oracle.com/technology/support/metalink/index.html
    Certify - Product Version and Other Selections: Oracle Database - Enterprise Edition On Linux x86-64 (AMD64/EM64T)
    General Notes For Oracle Database - Enterprise Edition On Linux x86-64 (AMD64/EM64T):
    Processor Chip Information:
    Linux x86-64, support on AMD64/EM64T and Intel Processor Chips that adhere to the x86-64 architecture with supported Linux releases.
    "Running Oracle 32-bit on AMD64/EM64T (64-bit OS) is not supported . "
    Oracle 32-bit running on AMD64/EM64T with a 32-bit OS is supported, refer to platform Linux x86 for more information on product availability.
    Note: As Ivan confirmed EM64T is mark for Intel 64 (x86-64) processors.
    Even the metalink Note: 182999.1 says...
    "A 32-bit application will work on both a 32-bit and 64-bit O/S, whereas a 64-bit application will only work on a 64-bit O/S."
    but the same articel says
    "Note: These statements do not necessarily apply to Oracle on Windows O/S's, Itanium or AMD64/EM64T based Platforms. See Certify for specific information."
    and then I got update from Support. Even they Say....
    "No it is not suggested that you run Oracle at 32 bits for a Linux X86_64 platform. This would not be a good idea"
    I guess I need to sit with my senior DBAs and SA tomorrow to find the path forward...
    Thanks all.
    Krishna Bussu.

  • Solaris 10 64 bit and 64 bit JVM support for Weblogic Server 9.1

    Does the following configuration supported:
    Weblogic Server 9.1
    Sun Solaris 10 (64 bit)
    Sun JVM 5.0 (64 bit)
    I could only find reference to 32 bit JVM on bea site.
    Any help is appreciated.
    Thanks

    Hi.
    answers inline:
    sanjay wrote:
    Hi,
    Can Weblogic Express (Cluster edition)6.1J sp2 be installed on Sun Solaris(Sparc)
    8(64 bit) ?Yes - http://edocs.bea.com/wls/platforms/index.html#solaris8
    >
    >
    Can Weblogic Express (Cluster edition)6.1J sp2 JDBC driver be used for Oracle 8.1.7(Solaris
    64 bit) ?
    Yes - http://edocs.bea.com/wls/platforms/index.html#jdbc
    Michael Young
    Developer Relations Engineer
    BEA Support

  • OSB 2.6  installer for solaris 10 (64 bit) - required

    Hi,
    I am are not able find the installer for OSB 2.6 for solaris 10(64 bit).
    Where can I find the same?
    Thanks in Advance.
    Rajani

    Don't know what a service id is, but you will need to be an oracle customer, which I assume you are if you are requesting old software.
    here is the link I use
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5775706955868202591::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,763603.1,1,1,1,helvetica
    cheers
    James

  • Java hang on Solaris 9 64 bit

    On the Solaris 9 64bit while I'm using my java (jre1.3.1) application causes the Java windows to hang. These windows cannot be closed or even killed from the resident Window manager.
    But if I use Solaris 8 64 bit or Solaris 9 32 bit my application works well without hang.
    Can someone help me???
    thank you
    Rina

    Although I got the following link
    http://download-uk.oracle.com/docs/html/A96167_01/toc.htm
    however, it's for Solaris 8.
    Is the process same for Solaris 9 or there're any issues during the installation?
    Are there any additional configuration compatibility checks need to be done?
    Is there any quick installation steps like your earlier link?
    Thanks.

Maybe you are looking for

  • E4200 No Longer Sees My Iomega 1TB External Hard Drive

    Hello - I had an Iomega 1TB External Hard Drive connected to my E4200 router.  I had shares confgured and they were properly running on the network. As of yesterday, this all stopped working. The router does not see the drive; it is as though it is n

  • Problem in keyboard reading....

    i was creating a program which using the keyboard to control the movement of a character,(picture). but when i run the program in jvm 1.4.1 , the program doesn't read anything from the keyboard. previously i was running it in jvm 1.3.1 ..... any solu

  • How to Configure Apache Web Server  with Tomcat web container in Linux

    Hi all, I am working on Tomcat web server 5.0.19 on Linux AS 3.0., ( my Control Server) I need map my tomcat to Apache Web Server (httpd) in another system (web server). I dont have jk2_ or jk_mod .so files to use in my tomcat/conf directory to make

  • XSQL and a form on JSP problem

    I have a simple xsql page that just outputs the parameters from a html form. But when I the html form is placed on a jsp page, I get the following error: java.lang.NullPointerException at oracle.xml.xsql.XSQLHttpUtil.HttpRequestAsXMLDocument(XSQLHttp

  • My icons all changed from the program icon to one Microsoft Office icon

    I was reviewing emails and was reading one....I have no idea what I did, but all the desktop icons for my various programs were all changed to one icon....which is an icon for Microsoft Office 2010.  I have tried to figure out what I need to do to re