Oracle Messenger Default Display Name

Is it possible for the default Display Name for a Oracle Messenger user to be automatically pulled from an LDAP attribute other than that of the login id without changing what the login id is?
Thanks!
-John

Thanks I was soo close.
I updated the Nickname field from "mailNickname" to Display Name in the config file, uploaded it to TFTP and restarted TFTP and the Jabber client and it didn't help. I then noticed that the Local Nickname takes presedence over the default so I had to go through each name on my list and blank out the nickname and press save to make it go to the default which was now set to Display name.
Thanks

Similar Messages

Oracle Applications Default User Name/Psw

When you install Oracle Applications(Financials)
Is there any default User and password or administrator has to
create a user and its responsibilities first?

If You have installed Vision, then operations/welcome may even
work

In portal 9i, removal of folder display name link

hi all,
i need to know, how to make the folder display name not a link.
by default display name comes as a link, which points to the particular content area , the folder uses.
--archana

Hi Samer_asn,
I am trying to do exactly what you did.
Can you tell me how you could retrieve the word doc from blob and show it in a portlet when a user clicks on a link
Thanks in advance
Jay

Default caller name for a given phone number

If you have multiple contacts that have a phone number in common, is it possible to decide which of those contacts is the default display name for that number?
For example, I have an entry for my wife. I also have an entry for "ICE" (In Case of Emergency). They're essentially the same. When my wife calls or texts me, the display says "ICE." I want it to say "Wife."
Is this possible?

Nope.
BTW, I am curious, do you have a passcode lock on your phone? If so, doesn't that pretty much make any ICE contact pointless since they cannot access the phone?
Understand your desire to have it there though. Also, there are apps out there (think called ICE) that can let you put a icon on your screen that says ICE and then link that to a number.
Message was edited by: DaVBMan

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

Default signature (the default cursive name) does not display on executed PDF

When I and my client e-sign a document with our default signatures (the default cursive name), none of our signatures displays on the executed (e-signed by both of us) PDF. However if I and/or client upload an image for our signatures and use it for our profile to e-sign the document, it does show up on the executed PDF.
The problem is I can’t ask everyone to upload an image of their signatures. The default signature (cursive name should show up on executed PDF. Any idea why it doesn’t or how to fix it?
Thanks for your help in advance.

Similar problem. The cursive signature and date stamp appear in Acrobat Pro, but not in Preview. I tried to sign in Preview Document Mode, as suggested elsewhere, and that did not work. This is a preloaded signature I'm working with. It worked on my first attempt when I created the signature. Perhaps that's the only thing that works.

Oracle BIEE installation issue: Application Server default OC4J name error

Hi all,
I am installing OBIEE 10.1.3.3.2 windows 32bit version on windows 2003 sp2. Before the installation I have installed the JDK 5 and Application Server 10.1.3.1.0(J2EE Server and Web Server) on the same server according to the pre-install section in the OBIEE installation guide.
When I install OBIEE (advanced installation), I got the error when I specify the Oracle Application server location:
Please specify a valid Oracle Application Server 10g installation location. A valid Oracle Application Server 10g installation must have the default OC4J instance named home and that home OC4J instance must be enabled.
When I install the Application Server 10.1.3.1.0, I have change the default OC4J name to "oc4j-soa", I think this is the root reason I got the error. I have tried to create another OC4J instance named "home", but failed coz the name is used for another directory.
Then can I have another way to continue the installation? Why OBIEE installer have this strange constrain while not any words about this issue in the installation guide (coz I follow the each steps in the guild before I take action)? I have search some threads and the only information is to install a simple installation, but it would create another application server..... and the simple installation type is not what I want.
Can anybody give me some hint or information about this issue? otherwise I have to purge and reinstall the server...... Thanks
Scott

Reinstalling the App Server and naming oc4j instance to be called "home" resolves the issue but this is an odd requirement. I have an OC4J instance already running and it is named something else. Is there any other alternative to make this work?
Swapan.
PS. I can always create a new oc4j instance named "home" but this is wasting of server resources.

Oracle Messenger Console"Bad user name or password, Please renter your use"

Hi,
I faced with problem with Oracle Messenger Console. I can not connect to
my Portal Server (RTC Serevrice).
I have installed Oracle Messenger to my Windows Operating System
and It should communicate with My Oracle Collaboration Suite 10g Installed in Linux Os
But I receive following Error:
Sign in failure. "Bad user name or password, Please renter your user name or password"
I should mention that I enter my user name as following format:
<username>@<domain>
also
I have run rtcctl getproperties command to ensure information about my domain.
Any comment and help will be appreciated in advance.

FYI: This topic is in the wrong category, should be under "Primavera P6 Enterprise Project Portfolio Management". See if there is a way to move it and you may get more exposure.
I re-read your question and it is unclear to me what DB platform you are attempting to run on. Is this Microsoft SQL Server or Oracle. Also, please specify the version.
If Oracle:
-Are you able to TNSPING your Oracle XE instance?
-If you can TNSPING it, try connecting from the command prompt via SQLPLUS:
sqlplus admprm$pm/password@XE
Also worth noting, P6r8 admin functions have been moved out of the desktop client and into the Web so you will be limited in what you can demo without installing the web component.
Edited by: cruz878 on Jan 17, 2011 10:28 AM

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Default Column Name in Module

Hi all
In Designer 10.1.2.0.1 i have the following problem:
If i create a Table-Usage in a Module-Component i define the source table. After this i choose the columns on the "items"-tab. In the "available columns"-section the columns are displayed correctly. when i select them in the "Selected Items" there is a "2" at the end of the column name.
NAME is NAME2
DESCRIPTION is DESCRIPTION2
I could change the name on the next tab, but de default column name is always with a ending 2.
is there a preference to set or is it a bug?
Regards
Beat

IMHO there is no preference to control this behaviour and Oracle will call this a "feature". In this way the column names and the item names will have different names when referencing them in derivations etc.
Personally I also remove the '2' from every item...

OIM 11g - Display Name policy

Hi,
may you help to find where is the default "policy" that compute and set the OIM User attribute named Display Name = <First Name> + <blank> + <Last Name>? Can I change that default behavior?
Thanks,
Gabriele

Nishith Nayan wrote:
1. most of the time we get full name or display name from trusted source. and If we apply your method the OOTB won't work.Why not? OOTB trusted recon save it to UDF and then copy it to OOTB after recon. I just meant that OOTB field should be used and now if the use case is of recon or UI create users is a seperate question.
2. Even OOTB update Display name after user creation again mess to sync the Eventhandler order. and why two handler for same and on same field.Not a mess, just the way orchestration works & our daily bread. ;-) and two eventhandler on the same field is beause Oracle did not provide a policy for this field.
3. Third is all about personal experience and convenience. Agreed & my personal exp is that this OOTB Display Field is used at lot many places in UI and code; thus those functionalities would break if someone goes for UDF solution.
>
>
Just my two cents as I am still a humble learner.
-Bikash

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

How to set the default file name for upload

Hi All,
I have the following BSP app for a file upload of a csv file. I want the page when displayed show the default file name to be loaded as c:\db1\currentPM.csv
What changes do I need to make to get the default file name in the BSP app.
Thanks
Karen
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content id               = "content"
               design           = "classicdesign2002design2003"
               controlRendering = "sap"
               rtlAutoSwitch    = "true" >
<htmlb:page title="File Upload " >
    <htmlb:form method       = "post"
                encodingType = "multipart/form-data">
          <htmlb:textView text   = "File:"
                          design = "STANDARD" />
          <htmlb:fileUpload id          = "uploadID"
                            onUpload    = "UploadFile"
                            upload_text ="Upload"/>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
On Input Processing
event handler for checking and processing user input and
for defining navigation
DATA: EVENT TYPE REF TO IF_HTMLB_DATA,
      DATA TYPE REF TO CL_HTMLB_FILEUPLOAD,
      LV_OUTPUT_LENGTH TYPE I,
      LV_TEXT_BUFFER TYPE STRING,
      FILE_NAME TYPE STRING,
      FILE_PATH TYPE STRING ,
      INTERN TYPE TABLE OF ZALSMEX_TABLINE.
DATA: LT_BINARY_TAB TYPE TABLE OF SDOKCNTBIN .
TYPES: BEGIN OF TY_TAB,
       FIELD1(2) TYPE C,
       FIELD2(2) TYPE C,
       FIELD3(2) TYPE C,
       FIELD4(2) TYPE C,
       FIELD5(2) TYPE C,
       END OF TY_TAB.
DATA: WA_TAB TYPE TY_TAB,
       IT_TAB TYPE TABLE OF TY_TAB.
TYPES: BEGIN OF TY_LINE,
          LINE(255) TYPE C,
       END OF TY_LINE.
DATA: WA_LINE TYPE TY_LINE,
       IT_LINE TYPE TABLE OF TY_LINE.
EVENT = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
IF EVENT IS NOT INITIAL AND EVENT->EVENT_NAME = HTMLB_EVENTS=>FILEUPLOAD.
DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST = RUNTIME->SERVER->REQUEST NAME = 'fileUpload' ID = 'uploadID' ).
FILE_NAME = DATA->FILE_NAME.
FILE_PATH = FILE_NAME.
IF DATA IS NOT INITIAL.
    CALL FUNCTION'SCMS_XSTRING_TO_BINARY'
     EXPORTING BUFFER = DATA->FILE_CONTENT
     IMPORTING OUTPUT_LENGTH = LV_OUTPUT_LENGTH
     TABLES BINARY_TAB = LT_BINARY_TAB .
    CALL FUNCTION'SCMS_BINARY_TO_STRING'
    EXPORTING INPUT_LENGTH = LV_OUTPUT_LENGTH
     IMPORTING TEXT_BUFFER = LV_TEXT_BUFFER
     TABLES
     BINARY_TAB = LT_BINARY_TAB.
    IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SPLIT LV_TEXT_BUFFER AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE IT_LINE.
    IF SY-SUBRC = 0.
      LOOP AT IT_LINE INTO WA_LINE.
       SPLIT WA_LINE AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
        split wa_line at ','
        INTO WA_TAB-FIELD1 WA_TAB-FIELD2 WA_TAB-FIELD3 WA_TAB-FIELD4 WA_TAB-FIELD5.
        append wa_tab to it_tab.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDIF.

Also, I missed another point.
In the folder c:\dbdata I have a number of CSV files on the user frontend. I would like the BSP application to get the list of files in the folder and process them one after the other. How can I get the list of files on the folder in the user PC and how to process them one after the other.
I want the form to display only the default folder and once I press on upload it must process all files and display the status of processing on the same page.
Please kindly share ideas how I can implement this app.
Thanks
Karen

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

Is there a way to change the export default file name

I have a request to change the default file name when doing a pdf export of a report. By deault, when pushing the export to pdf button, the name is NONAME.pdf. They want the default name to be the channel name is displayed on the report.
Is there an easy way to do this, or will I have to load all new code into the export button?

What you'll probably want to do is create a script that uses the Call Report.Sheets.ExportToPDF function and programatically specify the name. From here, you could set it as one of the function buttons or even include it on the toolbar if you'd like.
Jesse S.
Applications Engineer
National Instruments

Oracle Messenger Default Display Name

Similar Messages

Maybe you are looking for