Oracle Migration / Dispatcher Stopped
Hi All,
This is our infrastructure:
Windows 2000 Server
Kernel Release SAP 4.6D
Patch Level 2307
Oracle Version 8.1.7.4.1
We are migrating oracle to 9.2
The problems is that we installed Oracle 9.2 (only installation, migration not yet.) and them there was and electrical failure, so the server was turn-off.
Now SAP Doesn't start-up (it remains in a Yellow State) Since the disp+work.exe is stopped. And the I can't run SQLPLUS it gives this error:
<b>SP-0642: SQL*Plus internal error state 2165, context 4294967295:0:0 Unable to proceed</b>
If you try to run <b>sapdba</b> it works perfectly, and gives the following information:
<b>ORACLE Version: 8.1.7.4.1
ORACLE_SID: XXX
ORACLE_HOME: D:\oracle\XXX\ora817
DATABASE: open
SAPR3: 46B, not connected</b>
Best Regards,
Desiree Cardenas
The system can't come up if you just installed the software and did not do the migration.
As on every failed system start, it is advised to check the developer traces (dev_disp, dev_w0) for potential errors.
You should shutdown the SAP system and do the rest of your Oracle migration before you attempt to start the SAP system.
Markus
Similar Messages
-
Dispatcher stopped and Workprocessors are Ended State
Hi Experts
Suddenly my dispatcher stopped and all work processors are in Ended state in the ECC6.0 with Oracle database in windows 2003. I have checked the Memory parameters and resetted the values but still getting the same problem here i am pasting the dev_disp and dev_w0 files. Please help me need full
Regards
Chandra
dev_disp::
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CHE
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 175
intno 20050900
make: multithreaded, Unicode, optimized
pid 1536
Sun Dec 07 13:05:43 2008
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1536) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sun Dec 07 13:05:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0081.qqq.nxst) took 11 seconds
Sun Dec 07 13:05:59 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >I3LSERVSAP1_CHE_00 <
DpShMCreate: sizeof(wp_adm) 23856 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06840040, size: 5081056)
DpShMCreate: allocated sys_adm at 06840040
DpShMCreate: allocated wp_adm at 06842118
DpShMCreate: allocated tm_adm_list at 06847E48
DpShMCreate: allocated tm_adm at 06847E78
DpShMCreate: allocated wp_ca_adm at 06C7DEF8
DpShMCreate: allocated appc_ca_adm at 06C83CF8
DpShMCreate: allocated comm_adm at 06C85C38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06D06AF8
DpShMCreate: allocated gw_adm at 06D06B38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06D06B68
DpShMCreate: allocated wall_adm at 06D06B70
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4075 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1668]
***LOG Q0K=> DpMsAttach, mscon ( I3LSERVSAP1) [dpxxdisp.c 12364]
DpStartStopMsg: send start message (myname is >I3LSERVSAP1_CHE_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Sun Dec 07 13:06:39 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:49 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Dec 07 07:36:49 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6120 Ended no 1 0 0
1 DIA 2860 Ended no 1 0 0
2 DIA 6020 Ended no 1 0 0
3 DIA 5632 Ended no 1 0 0
4 DIA 588 Ended no 1 0 0
5 DIA 6016 Ended no 1 0 0
6 UPD 484 Ended no 1 0 0
7 ENQ 2268 Ended no 1 0 0
8 BTC 584 Ended no 1 0 0
9 BTC 6064 Ended no 1 0 0
10 BTC 4228 Ended no 1 0 0
11 BTC 5980 Ended no 1 0 0
12 SPO 1984 Ended no 1 0 0
13 UP2 5996 Ended no 1 0 0
Dispatcher Queue Statistics Sun Dec 07 07:36:49 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Sun Dec 07 07:36:49 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Dec 07 07:36:49 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:54 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >I3LSERVSAP1_CHE_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6084) (SOFT_KILL)
Stop icman
killing process (6128) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6084 HANDLE:1484)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:55 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6084 HANDLE:1484)
wait for end of icman
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:56 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:57 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:58 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:59 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6128 HANDLE:1488)
DpStartStopMsg: send stop message (myname is >I3LSERVSAP1_CHE_00 <)
NiIMyHostName: hostname = 'I3LSERVSAP1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Dec 07 13:07:07 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12710]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1420 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1420 (pos=2)
SiSelNRemove: removed sock 1420
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/14
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1420
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1536) [dpxxdisp.c 10908]
Good Bye .....
dev_w0::
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Dec 07 13:05:59 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.167)
B New connection 0 created
M sysno 00
M sid CHE
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 175
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 6120
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6120) [dpxxdisp.c 1323]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 23856 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06840040, size: 5081056)
M DpShMCreate: allocated sys_adm at 06840040
M DpShMCreate: allocated wp_adm at 06842118
M DpShMCreate: allocated tm_adm_list at 06847E48
M DpShMCreate: allocated tm_adm at 06847E78
M DpShMCreate: allocated wp_ca_adm at 06C7DEF8
M DpShMCreate: allocated appc_ca_adm at 06C83CF8
M DpShMCreate: allocated comm_adm at 06C85C38
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06D06AF8
M DpShMCreate: allocated gw_adm at 06D06B38
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06D06B68
M DpShMCreate: allocated wall_adm at 06D06B70
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sun Dec 07 13:06:00 2008
M ThInit: running on host I3LSERVSAP1
M
M Sun Dec 07 13:06:01 2008
M calling db_connect ...
C Prepending F:\usr\sap\CHE\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0672A1A8 0672F744 0672EFCC
C Attaching to DB Server CHE (con_hdl=0,svchp=0672EF18,srvhp=06740B04)
C Starting user session (con_hdl=0,svchp=0672EF18,srvhp=06740B04,usrhp=06755878)
C Now '/@CHE' is connected: con_hdl=0, nls_hdl=0, session_id=85.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0672EF18,usrhp=06755878)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0672A1A8 0672F744 0672EFCC
C Starting user session (con_hdl=0,svchp=0672EF18,srvhp=06740B04,usrhp=06755878)
C Now 'SAPSR3/<pwd>@CHE' is connected: con_hdl=0, nls_hdl=0, session_id=85.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance CHE is running on I3LSERVSAP1 with ORACLE version 10.2.0.2.0 since DEC 07, 2008, 12:36:31
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081207 130601 I3LSERVSAP1
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0B3A0040, size: 4400000)
I *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=720000 KB)
[shmnt.c 2174]
I *** ERROR => [CreateOsShm] MapViewOfFile(Key=9,Handle=0x000004DC) failed with Err=0
[shmnt.c 2174]
I *** ERROR => ShmCreate: Create (9,737280000,3) failed [shmnt.c 506]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 12570624 K
Config. maximum size : 12570624 K
Avail. maximum size : 12570624 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
2
d:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
3
f:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 6571584 K
Commit Charge Limit : 15822776 K
Commit Charge Peak : 7495116 K
Phys.Memory Total : 54 K
Phys.Memory Available : 93650276 K
File Cache : 17399116 K
Kernel Memory Total : 2084222616 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 93650304 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 837328 K
Private Pages : 0 K
Total heap size : 14532 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6440 K
Allocated heap memory : 6850 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
1940
sapstartsrv.exe
15956 K
15956 K
18656 K
18700 K
4
5716
msg_server.EXE
[MS] CHE_00
8508 K
8508 K
11000 K
11000 K
2
1536
disp+work.EXE
[DP] CHE_00
93256 K
93256 K
69540 K
69540 K
22
5772
igswd.EXE
[**] CHE_00
2796 K
3048 K
1436 K
1724 K
0
1304
igsmux.exe
12012 K
12012 K
13032 K
13032 K
2
5696
igspw.exe
2536 K
2536 K
2336 K
2336 K
0
5688
igspw.exe
2536 K
2536 K
2336 K
2336 K
0
6084
gwrd.EXE
[GW] CHE_00
10164 K
10164 K
9996 K
17924 K
2
6128
icman.EXE
[**] CHE_00
86128 K
86128 K
88096 K
88096 K
21
6120
disp+work.EXE
31808 K
31904 K
82200 K
85356 K
7
2860
disp+work.EXE
[WP] CHE_00
30604 K
30604 K
81656 K
85356 K
7
6020
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
5632
disp+work.EXE
[WP] CHE_00
16104 K
16104 K
67372 K
67372 K
3
588
disp+work.EXE
[WP] CHE_00
28804 K
28804 K
80672 K
85356 K
7
6016
disp+work.EXE
[WP] CHE_00
16084 K
16084 K
67372 K
67372 K
3
484
disp+work.EXE
[WP] CHE_00
16084 K
16084 K
67372 K
67372 K
3
2268
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
584
disp+work.EXE
[WP] CHE_00
19112 K
19112 K
85360 K
85360 K
4
6064
disp+work.EXE
[WP] CHE_00
30972 K
30972 K
81696 K
85356 K
7
4228
disp+work.EXE
[WP] CHE_00
30376 K
30376 K
81488 K
85356 K
7
5980
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
1984
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
5996
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
Sum
534240 K
1248476 K
M *** ERROR => ThShMCreate: ShmCreate SHM_ROLL_AREA_KEY failed [thxxhead.c 2598]
M *** ERROR => ThIPCInit: ThShMCreate [thxxhead.c 2095]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1532]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10534]
M
M Info for wp 0
M
M pid = 6120
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server I3LSERVSAP1_CHE_00 on host I3LSERVSAP1 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Sun Dec 07 13:06:01 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10754
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6120) [dpnttool.c 333]Hi Chandra
If you look at the DEV_w0 log you can see the work process are not comming you as they are not getting enough shared memory see this error message
" Can't find free space for Shared Memory (Size=720000 KB) "
Please review the parameter changes made by you in Instance profile before restart of instace. Check the values of these parameters and if you are not sure of the value changed by you undo the parameter changes made before the instace restart
Restart the instance again after these changes in instance profile. for now you can change the instace profile file from OS but don't forget to import this changed profile when instace is up
if you did not changed any Profile parameters, check the physical memory available. chance could you some hardware memory issue. get your os team to check.
Its a clear case of memory issue ..
Rajeev -
Dispatcher stopped because of error while applying patches.
<b>Hi All,
I was applying basis patch level 12 on a Netweaver '04 application server but unfortunately the tablespace got filled up and the SAP application became unresponsive.
Now i have created new datafiles and also deleted the patch entry from tables PAT01 and PAT02. But still the dispatcher stops when i try to logon.
I am pasting the contents of the file dev_disp.
Please somebody help me out.</b>
trc file: "dev_disp", trc level: 1, release: "640"
Tue Feb 27 13:00:30 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 3816
***LOG Q00=> DpSapEnvInit, DPStart (00 3816) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Feb 27 13:00:35 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 25008 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04550040, size: 3207168)
DpShMCreate: allocated sys_adm at 04550040
DpShMCreate: allocated wp_adm at 04551B58
DpShMCreate: allocated tm_adm_list at 04557D08
DpShMCreate: allocated tm_adm at 04557D30
DpShMCreate: allocated wp_ca_adm at 047FE978
DpShMCreate: allocated appc_ca_adm at 04804738
DpShMCreate: allocated comm_adm_list at 04806678
DpShMCreate: allocated comm_adm at 04806690
DpShMCreate: allocated vmc_adm_list at 0484D360
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0484D388
DpShMCreate: allocated wall_adm at 0484D390
MBUF state OFF
Tue Feb 27 13:00:36 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1227 blocks reserved for free list.
ES initialized.
Tue Feb 27 13:00:37 2007
J2EE server info
start = TRUE
state = STARTED
pid = 2244
argv[0] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1108
argv[5] = -DLISTEN_PORT=1109
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=HMI
argv[8] = -DSAPMYNAME=hsdnt2400904_HMI_00
argv[9] = -DSAPPROFILE=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( hsdnt2400904) [dpxxdisp.c 9736]
Tue Feb 27 13:00:39 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Tue Feb 27 13:00:40 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Feb 27 13:00:42 2007
DpJ2eeLogin: j2ee state = CONNECTED
Tue Feb 27 13:01:17 2007
ERROR => W0 (pid 936) died [dpxxdisp.c 12187]
ERROR => W1 (pid 2252) died [dpxxdisp.c 12187]
ERROR => W2 (pid 3820) died [dpxxdisp.c 12187]
ERROR => W3 (pid 2264) died [dpxxdisp.c 12187]
ERROR => W4 (pid 732) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 2268) died [dpxxdisp.c 12187]
ERROR => W6 (pid 2292) died [dpxxdisp.c 12187]
ERROR => W7 (pid 2300) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W8 (pid 2308) died [dpxxdisp.c 12187]
ERROR => W9 (pid 2316) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W10 (pid 1732) died [dpxxdisp.c 12187]
ERROR => W11 (pid 1704) died [dpxxdisp.c 12187]
ERROR => W12 (pid 2344) died [dpxxdisp.c 12187]
ERROR => W13 (pid 2352) died [dpxxdisp.c 12187]
ERROR => W14 (pid 2360) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W15 (pid 2368) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W16 (pid 1740) died [dpxxdisp.c 12187]
ERROR => W17 (pid 2384) died [dpxxdisp.c 12187]
ERROR => W18 (pid 2328) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-936 (SIGUSR2)
ERROR => DpWpKill(936, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2252 (SIGUSR2)
ERROR => DpWpKill(2252, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3820 (SIGUSR2)
ERROR => DpWpKill(3820, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2264 (SIGUSR2)
ERROR => DpWpKill(2264, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-732 (SIGUSR2)
ERROR => DpWpKill(732, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2268 (SIGUSR2)
ERROR => DpWpKill(2268, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2292 (SIGUSR2)
ERROR => DpWpKill(2292, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2300 (SIGUSR2)
ERROR => DpWpKill(2300, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-2308 (SIGUSR2)
ERROR => DpWpKill(2308, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-2316 (SIGUSR2)
ERROR => DpWpKill(2316, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-1732 (SIGUSR2)
ERROR => DpWpKill(1732, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-1704 (SIGUSR2)
ERROR => DpWpKill(1704, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-2344 (SIGUSR2)
ERROR => DpWpKill(2344, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-2352 (SIGUSR2)
ERROR => DpWpKill(2352, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-2360 (SIGUSR2)
ERROR => DpWpKill(2360, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-2368 (SIGUSR2)
ERROR => DpWpKill(2368, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-1740 (SIGUSR2)
ERROR => DpWpKill(1740, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-2384 (SIGUSR2)
ERROR => DpWpKill(2384, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-2328 (SIGUSR2)
ERROR => DpWpKill(2328, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:27 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Feb 27 07:31:27 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 936 Ended no 1 0 0
1 DIA 2252 Ended no 1 0 0
2 DIA 3820 Ended no 1 0 0
3 DIA 2264 Ended no 1 0 0
4 DIA 732 Ended no 1 0 0
5 UPD 2268 Ended no 1 0 0
6 UPD 2292 Ended no 1 0 0
7 UPD 2300 Ended no 1 0 0
8 ENQ 2308 Ended no 1 0 0
9 ENQ 2316 Ended no 1 0 0
10 BTC 1732 Ended no 1 0 0
11 BTC 1704 Ended no 1 0 0
12 BTC 2344 Ended no 1 0 0
13 BTC 2352 Ended no 1 0 0
14 BTC 2360 Ended no 1 0 0
15 SPO 2368 Ended no 1 0 0
16 UP2 1740 Ended no 1 0 0
17 UP2 2384 Ended no 1 0 0
18 UP2 2328 Ended no 1 0 0
Dispatcher Queue Statistics Tue Feb 27 07:31:27 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Tue Feb 27 07:31:27 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Feb 27 07:31:27 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:32 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2244)
killing process (2244) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 8 from selectset
DpDelSocketInfo: del info for socket 8 (type=8)
NiBufClose: clear extensions for hdl 8
NiBufSetStat: bufstat of hdl 8 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 8 / socket 1324
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 1548
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2216) (SOFT_KILL)
Stop icman
killing process (2220) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2216 HANDLE:1568)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:33 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2216 HANDLE:1568)
[DpProcDied] Process died (PID:2220 HANDLE:1560)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:34 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:35 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:36 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:38 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:39 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:40 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:41 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:42 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:43 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:44 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:45 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:46 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:47 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:49 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:50 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:51 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:52 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:54 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:55 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:56 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:57 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:58 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:59 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:00 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:01 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:02 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:03 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:04 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:05 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:06 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:07 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:08 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:09 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:10 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:11 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:12 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:13 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:14 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:15 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:16 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:17 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:18 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:19 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2244 HANDLE:1536)
NiIMyHostName: hostname = 'hsdnt2400904'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/19
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 1540
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3816) [dpxxdisp.c 8495]
Good Bye .....
<b>Thanks in Advance,
Abhishek Srivastava</b>Hi Matt,
I am pasting the contents of tha file dev_w0.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Feb 27 17:34:23 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 2664
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2664) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 25008 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04550040, size: 3207168)
M DpShMCreate: allocated sys_adm at 04550040
M DpShMCreate: allocated wp_adm at 04551B58
M DpShMCreate: allocated tm_adm_list at 04557D08
M DpShMCreate: allocated tm_adm at 04557D30
M DpShMCreate: allocated wp_ca_adm at 047FE978
M DpShMCreate: allocated appc_ca_adm at 04804738
M DpShMCreate: allocated comm_adm_list at 04806678
M DpShMCreate: allocated comm_adm at 04806690
M DpShMCreate: allocated vmc_adm_list at 0484D360
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0484D388
M DpShMCreate: allocated wall_adm at 0484D390
X
X Tue Feb 27 17:34:24 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 27 17:34:27 2007
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\HMI\920 from environment
C *** ERROR => Couldn't initialize Oracle Client Library
please check your installation
[dbsloci.c 8095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1269]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hsdnt2400904_HMI_00 on host hsdnt2400904 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Feb 27 17:34:27 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9589
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2664) [dpnttool.c 357]
Please help me out if you have any solution.
Regards,
Abhishek Srivastava -
Sol Man 4.0 installation - dispatcher stops
Hi All,
I have just installed oracle 10.2.0.2. Now I am installing Solution Manager 4.0. (OS is windows 2003) I have reached the stage where it tries to 'start the ABAP instance'. The issues is that the dispatcher stops and the sapinst throws error.
The dev_disp says :
Tue Jun 26 13:02:40 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5275]
MtxInit: 30000 0 0
ERROR => DpSysAdmExtCreate: ShmCreate (CREATE) [dpxxtool2.c 607]
ERROR => dispatcher already running ???? [dpxxtool2.c 608]
ERROR => I better EXIT before I do any (more) damage [dpxxtool2.c 610]
I have enabled the /PAE /3GB option in boot.ini. Increased the paging file size to 54 GB. Restarted the system.
Increased profile parameters PHYS_MEMSIZE to 9216.
SAPOSCOL and all other services are running. R3trans -d is successful.
Database is OPEN.
Still when I try to start SAP from MMC the dispatcher stops.
Even updated the kernel (it shows two kernels, UC n Non-UC - updated both). Still No luck.
I do have another 'Java Only' system (live auction) installed on the same server.
Any Ideas ??
Cheers
Kunal.Hey Buddy,
Looks to me like its looking for Host address and its unable to resolve hostname.
Kindly check once with your network port IP. Is this running on Domain or local host?
If local host assign a IP adddress ( static ) and check it should work.
Thanks & Regards
Vivek -
Dispatcher stops while starting J2EE processes
Hi All,
While starting the instance the dispatcher stops while starting J2EE processes.
The contents of <b>dev_ms</b> file are as follows:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1260] Fri Aug 10 10:52:00 2007
[Thr 1260] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 26
intno 20050900
make: multithreaded, Unicode
pid 3116
[Thr 1260] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3116) [msxxserv.c 1828]
[Thr 1260] load acl file = D:\usr\sap\EC6\SYS\global\ms_acl_info.DAT
[Thr 1260] MsGetOwnIpAddr: my host addresses are :
[Thr 1260] 1 : [10.112.51.63] hsdnt24s12.noida.hcltech.com (HOSTNAME)
[Thr 1260] 2 : [127.0.0.1] HSDNT24S12.noida.hcltech.com (LOCALHOST)
[Thr 1260] MsHttpInit: full qualified hostname = hsdnt24s12.noida.hcltech.com
[Thr 1260] HTTP logging is switch off
[Thr 1260] set HTTP state to LISTEN
[Thr 1260] MsHttpOwnDomain: own domain[1] = noida.hcltech.com
[Thr 1260] ms/icf_info_server : HSDNT24S12.noida.hcltech.com
[Thr 1260] *** I listen to port sapmsEC6 (3603) ***
[Thr 1260] *** I listen to internal port 3903 (3903) ***
[Thr 1260] *** HTTP port 8103 state LISTEN ***
[Thr 1260] CUSTOMER KEY: >Q0671421507<
[Thr 1260] Fri Aug 10 10:53:40 2007
[Thr 1260] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from HSDNT24S12_EC6_03 [msxxserv.c 4680]
Kindly help me out to solve this issue.
Thanking in Advance,
AbhishekHi Santosh,
Contents of <b>dev_ms</b> are as follows:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 7592] Fri Aug 10 14:16:19 2007
[Thr 7592] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 26
intno 20050900
make: multithreaded, Unicode
pid 3580
[Thr 7592] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3580) [msxxserv.c 1828]
[Thr 7592] load acl file = D:\usr\sap\EC6\SYS\global\ms_acl_info.DAT
[Thr 7592] MsGetOwnIpAddr: my host addresses are :
[Thr 7592] 1 : [10.112.51.63] hsdnt24s12.noida.hcltech.com (HOSTNAME)
[Thr 7592] 2 : [127.0.0.1] HSDNT24S12.noida.hcltech.com (LOCALHOST)
[Thr 7592] MsHttpInit: full qualified hostname = hsdnt24s12.noida.hcltech.com
[Thr 7592] HTTP logging is switch off
[Thr 7592] set HTTP state to LISTEN
[Thr 7592] MsHttpOwnDomain: own domain[1] = noida.hcltech.com
[Thr 7592] ms/icf_info_server : HSDNT24S12.noida.hcltech.com
[Thr 7592] *** I listen to port sapmsEC6 (3603) ***
[Thr 7592] *** I listen to internal port 3903 (3903) ***
[Thr 7592] *** HTTP port 8103 state LISTEN ***
[Thr 7592] CUSTOMER KEY: >Q0671421507<
[Thr 7592] Fri Aug 10 14:17:59 2007
[Thr 7592] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from HSDNT24S12_EC6_03 [msxxserv.c 4680]
[Thr 7592] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 10547]
[Thr 7592] *** ERROR => MsSClientHandle: MsSRead C1 (HSDNT24S12_EC6_03), MSEINTERN [msxxserv.c 4164]
Contents of file <b>dev_w0</b> is as follows:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Aug 10 14:16:49 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' is "700.08", patchlevel (0.18)
B New connection 0 created
M sysno 03
M sid EC6
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 33
M intno 20050900
M make: multithreaded, Unicode
M pid 6020
M
M kernel runs with dp version 206000(ext=109000) (@(#) DPLIB-INT-VERSION-206000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6020) [dpxxdisp.c 1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22528 (1408)
M DpShMCreate: sizeof(tm_adm) 3939600 (19600)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1268)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F80040, size: 4602896)
M DpShMCreate: allocated sys_adm at 05F80040
M DpShMCreate: allocated wp_adm at 05F81E28
M DpShMCreate: allocated tm_adm_list at 05F87628
M DpShMCreate: allocated tm_adm at 05F87658
M DpShMCreate: allocated wp_ca_adm at 06349368
M DpShMCreate: allocated appc_ca_adm at 0634F128
M DpShMCreate: allocated comm_adm at 06351068
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 063D1F28
M DpShMCreate: allocated gw_adm at 063D1F68
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 063D1F98
M DpShMCreate: allocated wall_adm at 063D1FA0
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Aug 10 14:16:50 2007
M ThInit: running on host HSDNT24S12
M
M Fri Aug 10 14:16:51 2007
M calling db_connect ...
C Prepending D:\usr\sap\EC6\DVEBMGS03\exe to Path.
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR4's password
C Connecting as /@CN6 on connection 0 (nls_hdl 0) ... (dbsl 700 310805)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C7FBC8 05C85164 05C849EC
C Attaching to DB Server CN6 (con_hdl=0,svchp=05C84938,svrhp=05C96204)
C
C Fri Aug 10 14:16:52 2007
C Starting user session (con_hdl=0,svchp=05C84938,srvhp=05C96204,usrhp=05CAB0D8)
C Now '/@CN6' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10379]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C84938,usrhp=05CAB0D8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPSR4/<pwd>@CN6 on connection 0 (nls_hdl 0) ... (dbsl 700 310805)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C7FBC8 05C85164 05C849EC
C Starting user session (con_hdl=0,svchp=05C84938,srvhp=05C96204,usrhp=05CAB0D8)
C Now 'SAPSR4/<pwd>@CN6' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CN6 is running on HSDNT24S12 with ORACLE version 10.1.0.4.0 since 20070810
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070810 141651 HSDNT24S12
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A9E0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AE20040, size: 32768000)
M SHM_ROLL_ADM (addr: 066B0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CD70040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CE00040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CE90040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 11501]
C sc_p=05BD2F74,no=1,idc_p=05BE3998,con=0,act=1,slen=66,smax=256,#vars=0,stmt=05CAC8C8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=05BD2F74,no=1,idc_p=05BE3998,con=0,act=1,slen=66,smax=256,#vars=0,stmt=05CAC8C8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=05C9C038
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05CB0AA8,vda_p=05CACB38
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 62 cannot be read at this time
ORA-01110: data file 62: 'G:\ORACLE\CN6\SAPDATA4\SR4_11\SR4.DATA11' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2072]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10017]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server HSDNT24S12_EC6_03 on host HSDNT24S12 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Fri Aug 10 14:16:52 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10202
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6020) [dpnttool.c 327]
Regards,
Abhishek -
After OS upgrade to windows 2008 R2 x64 Dispatcher stopped by error
Hello everyone,
I am facing a problem after OS upgrade (from Windows Server 2003 Standard R2 x64 to Windows Server 2008 Standard R2 x64), Solution Manager 7.0 EhP1 on DB2 v9.7 FP4.
When I start SAP using mmc console after awhile Dispatcher stops.
When I wrote R3trans -dx in CMD:
D:\usr\sap\ASM\DVEBMGS00\exe>r3trans -dx
This is r3trans version 6.14 (release 701 - 19.01.11 - 11:44:00).
unicode enabled version
r3trans finished (0000).
The contents of [dev_w0|http://pokazywarka.pl/p9udr9/], [std_dispatcher.out|http://pokazywarka.pl/wgpsfx/] and[ std_server0.out|http://pokazywarka.pl/a5xsp0/]
I found an error in dev_w0:
[IBM][CLI Driver] SQL1531N The database alias "ASM" could not be found in the db2ds
C &+ driver.cfg configuration
And the Note: 1564507 - DB6: SQL1531N alias "<DBNAME>" not found in db2dsdriver.cfg
Contents of db2cl.ini:
; Comment lines start with a semi-colon.
[ASM]
Database=ASM
Protocol=tcpip
Hostname=sapsolman
Servicename=5912
[COMMON]
Diagpath=
sapsolman\sapmnt\ASM\SYS\global\db6\db2dump
Someone have any ideas how to fix Dispatcher ? I can attach any log files, if necessary.
Best regards,
KamilHi,
Well unfortunately, do not think its possible to fix it. We once had a similar situation with SAP system on MSSQL on Windows Server 2008. It was only an ABAP system so after a lot of hit and trial we got the system up. And would not get any support from SAP incase of future errors.
But for Solution manager this really would be complex because of the Java part. Do you have the backup before OS upgrade?
Would recommend a restore and migration as supported by SAP.
Regards,
Srikishan -
Unable to open 2.0/3.0 due to migration has stopped working in windows 7
Please help-the ADE was fine for 2 months-won't open anymore-please help. Thank you, Janet
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
hi all, i am facing this problem while starting sap in the console root the status of dispatcher turns from green to yellow and shows status "dispatcher stopped in sap" i went into the work directory file and tried to analyse trace file: "dev_w0"
and trace file: "dev_disp" from the work directory the contents of both the files are included below,i want to know the corrective action so as to start the dispatcher and the work process
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Jan 12 02:34:33 2003
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' ...
M
M Sun Jan 12 02:34:34 2003
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3460) [dpxxdisp.c 1016]
I
I Sun Jan 12 02:34:38 2003
I MtxInit: -2 0 0
X
X Sun Jan 12 02:34:39 2003
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X
X Sun Jan 12 02:34:40 2003
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sun Jan 12 02:34:41 2003
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dev_ERP_00 on host dev (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Jan 12 02:34:41 2003
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3460) [dpnttool.c 345]
trc file: "dev_disp", trc level: 1, release: "620"
Sun Jan 12 02:34:24 2003
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 3396
***LOG Q00=> DpSapEnvInit, DPStart (00 3396) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
Sun Jan 12 02:34:28 2003
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
Sun Jan 12 02:34:29 2003
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1190 MB
<ES> 1189 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( dev) [dpxxdisp.c 8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun Jan 12 02:34:30 2003
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Sun Jan 12 02:35:09 2003
ERROR => W0 (pid 3460) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3468) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3476) died [dpxxdisp.c 11210]
ERROR => W3 (pid 3484) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3492) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3500) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3512) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3520) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3536) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3544) died [dpxxdisp.c 11210]
ERROR => W10 (pid 3572) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3596) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3604) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3616) died [dpxxdisp.c 11210]
ERROR => W15 (pid 3624) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3636) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Sun Jan 12 02:35:18 2003
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3396) [dpxxdisp.c 7637]Hi,
> M Sun Jan 12 02:34:34 2003
> M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
> M Error 126 = "The specified module could not be found."
> B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
As per the error, it looks like some library files are missing in kernel directory. Have you done the kernel upgrade recently ?
Thanks
Sunny -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
As/400 to oracle migration (migrane)
Dear folks,
I am using oracle migration workbench to migrate data from AS/400 to Oracle. When I am capturing/importing data/model from source AS/400 system it shows up the databases available to be imported. Within that column it only shows the AS/400 system name instead of any relational database entry name. Therefore when I import that I only get some system tables and objects not the data files which are on the system. I dont know how to fix that so that it shows the relational database name so that I can import the data files not the system files.
Note: There was not RDB directory entry in the AS400 system but I have created one now.
your help is appreciated.
Munwar Soomro.Hi Munwar,
Am I correct in saying that you only see the server name in the Capture wizard?
1)If so can you confirm that when you connected that you had privileges to see the database you wanted
2)And if that database physically reside on the machine you connected too.
Regards,
Dermot -
MySQL to Oracle Migration Issue - Unknown character set index for field.
Hi,
Looking for help..!!!
Migrating mySQL - version 4 database to Oracle 10g using oracle migration work bench. It went well until the last step. But, during the data migration, OMWB has given the following error:
+++++++++++
Unable to migrate data from source table gets.sales_order_01 to destination table gets_ora.sales_order_oracle10: gets_ora.sales_order_oracle10; Unknown character set index for filed "12596" received from ser.
+++++++++++
Log file shows:
java.sql.SQLException: Unknown character set index for field '12596' received from server.
at com.mysql.jdbc.Connection.getCharsetNameForIndex(Connection.java:1692)
at com.mysql.jdbc.Field.<init>(Field.java:161)
at com.mysql.jdbc.MysqlIO.unpackField(MysqlIO.java:510)
at com.mysql.jdbc.MysqlIO.getResultSet(MysqlIO.java:285)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1326)
at com.mysql.jdbc.MysqlIO.sqlQuery(MysqlIO.java:1225)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2278)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2225)
at com.mysql.jdbc.Statement.executeQuery(Statement.java:1163)
at oracle.mtg.migrationServer.LoadTableData._migrateTableData(LoadTableData.java:563)
at oracle.mtg.migrationServer.LoadTableData.run(LoadTableData.java:326)
at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
I appreciate your help in this regards.
Regards,
KHi K,
Whats the default character set of you MySQL and Oracle Databases.
What version of JDBC driver are you using?
Is there any unicode characters used in your data?
Have you tried offline data move?
Thanks
Dermot.
Message was edited by:
dooneill -
I recently downloaded the Oracle Migration Tool for migrating a
Microsoft Access database to Oracle8 for Linux. This migration
tool contains the following components:
1. Oracle Installer 3.3.0.1.3
2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
4. Oracle Net8 Client 8.0.4.0.0
5. Oracle Objects for OLE 2.2.2.2.0
6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
7. Oracle8 ODBC Driver 8.0.4.0.0
8. Required Support Files 8.0.4.0.0
I installed everything onto my Windows98 client machine. Once I
did this, I could see the following entries in my Start Menu
under "Oracle for Windows95":
1. Microsoft ODBC Administrator
2. 004002 Class Library Documentation
3. 004022 Bound Controls and Class Library
4. 004022 Control Notes
5. 004022 Release Notes
6. Oracle Home Selector
7. Oracle Installer
8. Oracle Migration Assistant for MS Access
9. Oracle Objects for OLE Documentation
10. Oracle ODBC Help File
11. Oracle ODBC README File
12. Oracle ODBC Test
When I went into the Microsoft ODBC Administrator, I could also
see that there was a new entry under the ODBC Drivers tab:
Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
12/3/97
So far, so good.
Then I started going through the Oracle8 ODBC help file to get
my machine set up to start using the tool. Under "Configuration
Tasks," it says the following:
Before you configure the data source, you must configure Net8
database services, so there is an entry for each Service Name.
To do this, start the Oracle Net8 Assistant, either click on the
Oracle for Windows NT program group and click on the Oracle Net8
Assistant icon or from the start bar select Programs, select
Oracle for Windows NT, and select the Oracle Net8 Assistant.
Using the Oracle Net8 Assistant, you can create an entry in the
tnsnames.ora file for each Service Name. The Oracle Net8
Assistant is installed when you install Net8.
That's when I started running into problems. Although the
installer had shown that Net8 had been installed, I could not
find any evidence of a Net8 Assistant on my Windows98 client
machine. Is there a trick to starting up the Net8 Assistant?
Until I am able to perform this step, I cannot go to the next
step of configuring my ODBC driver.
Any help would be appreciated.
- Brendan
nullBrendan,
I am not 100% sure, but I believe win98 is not supported.... yet.
I know that 95 is supported, but to be honest, I do not run
winDOZE. Maybe an upper authority from Oracle should correct me
if I am wrong.
Kevin
Brendan Conner (guest) wrote:
: I recently downloaded the Oracle Migration Tool for migrating a
: Microsoft Access database to Oracle8 for Linux. This migration
: tool contains the following components:
: 1. Oracle Installer 3.3.0.1.3
: 2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
: 3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
: 4. Oracle Net8 Client 8.0.4.0.0
: 5. Oracle Objects for OLE 2.2.2.2.0
: 6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
: 7. Oracle8 ODBC Driver 8.0.4.0.0
: 8. Required Support Files 8.0.4.0.0
: I installed everything onto my Windows98 client machine. Once
I
: did this, I could see the following entries in my Start Menu
: under "Oracle for Windows95":
: 1. Microsoft ODBC Administrator
: 2. 004002 Class Library Documentation
: 3. 004022 Bound Controls and Class Library
: 4. 004022 Control Notes
: 5. 004022 Release Notes
: 6. Oracle Home Selector
: 7. Oracle Installer
: 8. Oracle Migration Assistant for MS Access
: 9. Oracle Objects for OLE Documentation
: 10. Oracle ODBC Help File
: 11. Oracle ODBC README File
: 12. Oracle ODBC Test
: When I went into the Microsoft ODBC Administrator, I could also
: see that there was a new entry under the ODBC Drivers tab:
: Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
: 12/3/97
: So far, so good.
: Then I started going through the Oracle8 ODBC help file to get
: my machine set up to start using the tool. Under
"Configuration
: Tasks," it says the following:
: Before you configure the data source, you must configure Net8
: database services, so there is an entry for each Service Name.
: To do this, start the Oracle Net8 Assistant, either click on
the
: Oracle for Windows NT program group and click on the Oracle
Net8
: Assistant icon or from the start bar select Programs, select
: Oracle for Windows NT, and select the Oracle Net8 Assistant.
: Using the Oracle Net8 Assistant, you can create an entry in the
: tnsnames.ora file for each Service Name. The Oracle Net8
: Assistant is installed when you install Net8.
: That's when I started running into problems. Although the
: installer had shown that Net8 had been installed, I could not
: find any evidence of a Net8 Assistant on my Windows98 client
: machine. Is there a trick to starting up the Net8 Assistant?
: Until I am able to perform this step, I cannot go to the next
: step of configuring my ODBC driver.
: Any help would be appreciated.
: - Brendan
null -
Error after Oracle Migration from DMTS into LMTS
Hello ,
I'm sorry, I posted my question again from ABAP General into this forum ABAP Dictionary. I think that here someone can help me in order to proceed with my job in the Development and in production system.
We are using SAP R/3 4.6C, with SAP kernel 2271, Oracle 9.2.0.5 and HP-UX 11.23
I did the Oracle migration from dictionary into locally managed tablespaces on the QTS system (and before that the same migration on a separate system as a copy from production):
1. export data and index tablespace with Oracle export command (exp: for PSAPCLUD and PSAPCLUI)
2. import into file for creation of indexes
3. Drop the data and corresponding index tablesspace with brtools - brspace
4. recreate the tablespaces with sapdba or with sqlplus (using the ddl scripts created before dropping the tablespaces) - - I think is my problem
5. import the data with Oracle import command
6. import the indexes from the previously created sql file
7. check optimizer statistics, analyze and next extents
But there is one problem.
Because I have also used the sapdba and ddl sql for recreating the tablespaces, I didn't specify the SAP data class for the newly created tablespace.
And in the tables TAORA, IAORA and DDART (what is very unclear for me) 3 rows missing for the USER1, TEMP and ??? data class.
If you try to import some transport in the corresponding tablespace which data class is missing an error ocur.
I have read the Note 646681 - Reorganizing tables with BRSPACE, and I saw the part: If the <reorg_tsp> tablespace contains any of the following tables: SDBAH,SDBAD,DBAML,DBATL,MLICHECK,TGORA,IGORA,TSORA,TAORA, IAORA,SVERS,DD02L,DD09L,DDNTT,DDART,DARTT or SAPLIKEY (SAPLIKEY is only available in NetWeaver 2004s or higher), then you should move them to the tablespace <aux_tsp> by online reorganization using BRSPACE:
brspace -f tbreorg -t <table_list> -n <aux_tsp>
Do you have the same problem?
Do you know how I can solve the problem now after the hole migration was done?
How can I dedicate tablespace data class?
Is it enought to just enter the same rows into the TAORA, IAORA and DDART?
Thanks,
Many regards,
RuzicaApparently you are trying to mix 32-bit code and 64-bit code. You must ensure that the 32-bit or 64-bit option is used consistently on every command, compiling and linking. The form of the option can depend on the version of the C compiler you are using, and whether you are on an x86 or sparc system. Consult the Pro*C and C compiler documentation.
-
DB Experts----Oracle 9i Installation Stops after 17%
Hi,
I have a Linux 64 bit Server Running Oracle 10gR2 and need to install a Oracle 9i database as one of programs that we have purchased only works with Oracle 9i.
I have downloaded the Oracle 9i installation instructions and applied the relevant patches and when i install the Oracle 9i it stops at 17% on the naeet.o file
cany anyone help.
thanksDear ,
I am not sure, still logically what will happen with LISTERER in port 1520 . What will happen to ORACLE_HOME . In my view two database at the same machine will not be possible, unless you make changes with all the default settings and locations of oracle. I have tried with Oracle 8i and Oracle 9i .
Thanks and Regards,
G J Shankar Nath
Systems Manager
GNRC Limited
Maybe you are looking for
-
How to set up port mapping in airport extreme?
I just buy a Ip cam (d link) which need to set up port forwarding for outside access. What can I do? My ISP is netvigator. How to set up and input which address to the airport utility? Please help. Thanks!
-
Can subreports use same selection parameter(s) as main report?
Hi, Is it possible to create subreports that use the selection selection parameter(s) as the main report. And if so, would the user need to make their selections twice, or just once when they open the report? Thanks, Jon
-
I'm a little confused on how JMS will handle messages sent to a Topic with Message driven beans attached to it. What I'm unclear about is how many message driven beans attached to a topic will receive the message. Clearl
-
How do I audition separate audio tracks in the source monitor?
I don't see anything about this in the Help doc. I want to listen to all four tracks independently from a P2 card, but when I load a clip into the Source Monitor, it sounds like I'm only hearing one track, or maybe I'm hearing all four. I honestly
-
HELP with purchased song issue
I recently purchased a song off itunes on my iphone that came out not long ago. I tried purchasing it off my computer but itunes just brought me to the page "content not available" or something like that. So I went to my phone and purchased it off th