Oracle Mobile Server 404

Hello,
i have installed Oracle Database 11g, Oracle Weblogic 12c and Oracle Database 11g.
so i configured a mobile domain because i want to sync a database from my android device to the oracle database.
Oracle Mobile Database:
     HOST:     localhost
     PORT:      1521
     SID:     orcl
     Repository:
          Schemaname: MOBILEADMIN
          PW:     ****
     Mobile Server Administrator:
          User: Administrator
          PW: ****
     DEMOSCHEMA:
          NAME: master
          PW: ****
     NEW DOMAIN: mobileserver
     PORT: 7777
I started runmobileserver.bat
and my weblogic with startWebLogic.cmd (localhost:7001/console <-- WORKS)
if i now want to access the admin site of the server i get a 404 error
localhost:7777/mobile
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
please help me.
thank you

Despite many attempts at trying to get an update on this topic I can't seem to get anyone from Oracle to provide any information. I'm now at a critical stage with a new project and would like to know if the Mobile Client will be available for iOS within the timeframes I am looking at. If not, will likely need to look at alternatives which will mean one or more large Mobile Server licences will not be renewed. Surely someone from Oracle on this forum can chime in and give us an update on where this is at?

Similar Messages

Deploy Oracle Mobile Server on Weblogic?

Hello,
We currently have a client-server application which communicates over HTTP with a BEA Weblogic 8 server on Solaris, and are assessing the feasibility of creating an offline client using Oracle Lite.
Ideally, we would like to install the mobile-server on our existing server, but this brings the problem that the current weblogic is already listening on the HTTP port, and the site policy at our customer site does not allow for any traffic to non-HTTP ports. Can we deploy the Oracle mobile server within this same Weblogic instance, or do we have to acquire a new server machine, which will then run only the mobile server?
Appreciate any information which can be provided.
Best wishes,
Roshan

The simple answer is no. Oracle Mobile Server is designed to run under a OC4J container. Can you use a port like 8080?
I am currently working on this setup and we split the application servers Weblogic and Oracle AS.

Oracle Mobile Server with SQLLite/Berkeley Db and dbsql

Hi all,
i am not sure if i am correct here but hopefully i am.
In the past we have had Oracle Mobile Server with Oracle Lite.
We decided to switch to new mobile Server because oracle webtogo is not longer supported and incompatible with windows 7. My administrator did migration of mobile server but migration utility reported that the available applications are incompatible.
So I decided to create a completely New Publication with a Java application. The new Publication contains only one publication Item. For the first tests I simply wanted to spool out the data contained in my local database.
In bin directory of sqlite folder i can find a utility named "dbsql". I understood it in this way that I can attach to an existing database file and take a look into that database.
If i call dbsql.exe BerkeleyTest all seems to be ok. But if i try to select some data from that file i only get the errormessage that databse is in wrong format or encrypted. What am i doing wrong there?
Am I right that the sql interface (I need that interface because I dont want to rewrite dataaccesslayer of my app) is only available in sqlite but not on "BerkeleyDb"?
Is anyone here to help me a little bit with my problem here?
Regards!
Martin

I do not know much about Oracle Mobile Server with Oracle Lite, does it use SQLite or BDB? I do know that databases created by SQLite cannot be read by Berkeley DB SQL (of which dbsql.exe is part of), and databases created by Berkeley DB SQL cannot be read by SQLite. Also, databases created by Berkeley DB outside of the SQL API cannot be read by the BDB SQL API. You can open BDB SQL databases with BDB outside of the SQL API, but I would not recommend that outside of a few BDB utilities described in the documentation. So if your BerkeleyTest database was created by SQLite or BDB outside of the SQL API, then it makes sense that dbsql.exe is returning an error when trying to read it.
Calling dbsql.exe BerkeleyTest does not open the database, that happens when the first operation is performed on it, which is why you did not get an error until you tried to select something.
Lauren Foutz

Oracle Mobile Server 11G with BerkeleyDB/SQLite

Hi all,
Actually I have got following situation:
There are 2 Java apps that are running on Oracle Lite. Due to our Win 7 migration und outrunning support of Support for Oracle Lite we decided to migrate to Oracle Mobile Server 11 G and switch to Berkeley DB. So far so good.
During migration my administrator reported warnings from migration utility that the apps are not compatible and aren't migrated. Within these applications databaseaccess is done via JDBC and SQL. There is no time and money to rewrite dataaccess layer, so I need SQL Access to Berkeley DB.
For my first tests I created via Mobile Server API a new Publication that contains simply one publication Item that is in One Way Synchronization (Server to Client) . I wanted to take a look into the submitted Database File. For that I found dbsql.exe. I called this app via command line with: "dbsql.exe MyDb.db". DBSql started but returned an error that SQL Statement is incomplete?!. Any idea? For that new publictation i also wrote a testapp that should spool out the contents of publication Item in a later step.
Ok now i took a new look into internet for getting information about SQL Support. There I found that Berkeley DB now is able to speak SQLite. So it seems that new database is able to speak SQL via SQLite. Is that correct?
I switched now in MobileServer Console my testapp to SQLite Win32; US and installed the SQLite client on my computer. My next try was to connect this database to dbsql.exe. The call of dbsql.exe "MyDb.db" returned that error that databse is eather corrupted or encrypted.
I was really unable to find a guide how to use that SQL API for Berkely DB. Which .jars should I import in my Java app? How is connection been made?
Is here anyone that can help me a little bit out?
Many many thanks in advance!
Martin

Hi, I see that this thread is old a little bit. Do you still need help on it? I have been able to create a publication with Mobile Server 11G with Berkeley DB as the client database. I have also found the jar to use to access the client database in java. Please let me know in you still need it and i'll post it here.

Oracle Database to Oracle Mobile Server

Hi,
How can I share existente table to Oracle Mobile Server.
I read something about publish, but I couldn't undertand how It really works.
Can someone help me?

Igual nos podemos entender en español :P
Que necesitas saber?
Saludos

Oracle Mobile Server 11GR2

Hi all,
currently we are using Oracle Mobile server 10.3.0.3 and would like move to Oracle Mobile Server 11GR2. But before going to that quite new area would like to get some feedback about that version/release as is critical for us to be sure that can safety support ~7000 users around the World. If somebody already using this system live can be in contact with me to understand how stabil it is, what challenges waiting us and etc. Probably even will be as an option tos schedule teleconference where we can talk about in in more detail way instead discussing this on the forum.
You can write me directly using the following email: [email protected]
Many thanks,
Saulius

I will contact you via email to discuss further.
Eric

How to access Oracle Mobile Server logs using PL/SQL?

I am starting to use Oracle solutions so I am a complete rookie.
I'm doing a project which requires to present the logs of mobile devices using the Oracle Mobile Server (integrated in Oracle Database Lite).
Does the mobile server have services I could use or do I have to parse the log files?
Thanks in advance for any support given!
Edited by: Hugo Zenha on 15-Apr-2009 07:40

basic details for the sync history is MOBILEASDMIN.C$SYNC_HISTORY. This will give you the client id (name), start and end times, success or failure (and error if fail) plus the total data volumes uploaded and downloaded.
You can get further detail by joining c$sync_his_pub_items on session_id, and this gives the detail of each table uploaded (phase=UPLOAD) in terms of timings and records, and the same for the download. upload tends to be the full set of tables (records=0 for no activity), whilst download is only the active tables, and includes whether a complete refresh was done
You can get information for the MGP process using c$mgp_history and c$mgp_his_clients
As all the repository data is stored in the database, there is a lot of possibly interesting stuff if you look through.
We use SQL and PL/SQL to do reports on the different users having syncs within a period for cross charging and identifying clients having problems

Oracle Mobile Server 11g - BerkelyDB corrupt.

We have a client that currently uses Oracle Database Lite 10.3.0.3.0 to synce an olite database that interacts with a Win32 application. Due to the support being dropped they are in the process of migrating to Oracle Mobile Server 11g, however I have run into an issue with the BerkeleyDB files created by the sync agent.
We have installed Oracle Mobile Server 11gR2 onto a linux environment, hosted on WebLogic 11. As a test I created a publication item for BerkeleyDB (Win32) with the workshop tool with a single table from our main database. Our developers are able to connect to the database using the System.Data.SQLite.dll and SQLite.Interop.dll files that came with the Windows MSI file, however any queries against a primary key column result in a "database disk image is malformed" error message. Queries against non-PK columns work fine.
Whenever I attempt to use the dbsql.exe file to connect to the database file, I am presented with the following:
C:\mobileclient\bdb\data\TESTUSER>dbsql.exe TEST.db
Berkeley DB 11g Release 2, library version 11.2.5.3.21: (May 11, 2012)
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
dbsql> .database
Error: SQL logic error or missing database
Attempting the command again will proceed with:
dbsql> .database
Error: out of memory
Enough connections/disconnections will eventually break though, but I doubt this is how it was meant to work. Once it is "working", this is the kind of errors our developers are running into:
dbsql> select * from tbl1;
PKCOL|VALCOL
1|ONE1
2|ONE2
3|ONE3
4|ONE4
5|ONE5
6|ONE6
dbsql> select * from tbl1 where valcol = 'ONE1';
PKCOL|VALCOL
1|ONE1
dbsql> select * from tbl1 where pkcol = 1;
Error: database disk image is malformed
dbsql>
We can create a table through this sql interface and it works just fine. So I'm thinking the issue is either with how the Sync Agent creates the database, or its with how the Workshop tells the server to build the tables. I have attempted to use the workshop on both Windows and Linux environments to see if that would help, but unfortunately it does not.
Does anyone have any ideas of where I should start looking? Am I just missing something that needs to be set on the client's (where the berkeleyDB is deployed) environment, or on the server side?
Thanks,
Nathan

This issue has been resolved. It was related to the developers having a different set of Berkeley DLL files reference on their machines.
Edited by: SparksN on May 10, 2013 12:24 PM
Edited by: SparksN on May 10, 2013 12:25 PM

Oracle Mobile server for iOS

Hi,
After going through documentation for Oracle Mobile server, I could not find support for iOS.
Does Oracle mobile server support iOS?
if not is there any plan to do so in the near by future?
Thanks

Despite many attempts at trying to get an update on this topic I can't seem to get anyone from Oracle to provide any information. I'm now at a critical stage with a new project and would like to know if the Mobile Client will be available for iOS within the timeframes I am looking at. If not, will likely need to look at alternatives which will mean one or more large Mobile Server licences will not be renewed. Surely someone from Oracle on this forum can chime in and give us an update on where this is at?

Oracle Mobile Server as a cloud application ?

Hi, Is it possible to run Oracle Mobile Server as a cloud application ?

Hi,
Yes
http://www.oracle.com/us/corporate/features/complete-cloud/index.html
Regards,
Taj

Oracle Mobile Server 10g, where to download?

Hi,
I can't find where to download it?

Same thing. You need mobile server to perform the replication and create the oracle lite database. You can use it at as a stand-alone database without the replication, but if you are looking to use it as a stand-alone database, I recommend going with Oracle PE or XE.

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Oracle 9i Lite Mobile Server deploye Problem As Apache Module

I am trying to get the Oracle9i Lite Mobile Server run as a Module under Apache.
my platform is Linux 7.2, which of course is documented as an option.
I managed to install the mobile server and the following document is
the latest from ORACLE site. and is very useful.
http://technet.oracle.com/docs/products/lite/doc_library/release501/readme.htm#new
I have one problem to overcome the module to load in Apache
'libwtgapach.so'
is the required shared library.
This does not load due to following error,
Cannot load /var/ORACLE/mobile/server/bin/libwtgapach.so into server:
/var/ORACLE/mobile/server/bin/libwtgapach.so: undefined symbol:
ap_global_ctx
All the libraries can be resolved here is the ldd ( link map )
ldd libwtgapach.so
liborafc.so => /var/ORACLE/mobile/server/bin/liborafc.so (0x40007000)
libjvm.so => /var/ORACLE/jdk/jre/lib/i386/classic/libjvm.so
(0x4002a000) libhpi.so =>
/var/ORACLE/jdk/jre/lib/i386/green_threads/libhpi.so (0x400bd000)
libdl.so.2 => /lib/libdl.so.2 (0x400dd000)
libpthread.so.0 => /lib/i686/libpthread.so.0 (0x400e1000)
libstdc++-libc6.1-1.so.2 => /usr/lib/libstdc++-libc6.1-1.so.2
(0x400f7000)
libm.so.6 => /lib/i686/libm.so.6 (0x40139000)
libc.so.6 => /lib/i686/libc.so.6 (0x4015c000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40297000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
I found this post explaining to recompile Apache
This actually means you installed mod_ssl as a DSO, but
. without rebuilding Apache with EAPI. Because EAPI is a
requirement for mod_ssl, you need an extra patched Apache
(containing the EAPI patches) and you have to build this
Apache with EAPI enabled (explicitly specify --enable-rule=EAPI
at the APACI command line).I recompiled apache with the following
./configure --prefix=/usr/local/ssl-apache/httpd-2.0.39
--enable-rule=EAPI ; make ; make install
I still get the same error when I try to load the module.Am I missing
something?
Any help is deeply appreciated.
-- ajith

Scott, I have yet to get WTG server to work as an NT service when loaded as an Apache module.
We've had to load it into a non-service based Apache server (one that runs from the command line in a MS-DOS prompt window). This is on XP Pro.
We've switched to running our WTG server on Linux.

Oracle Database Mobile Server 11g

Hi,
We implemented Oracle EBS R11i for one of our customers. We also implemented Oracle Mobile Server 9i on Windows Server and Olite 9i on PDAs running Windows.
Now the customer wants to upgrade Oracle EBS to R12 and also upgrade Oracle Mobile Server and Olite 9i to newer versions of Oracle and also want to use Android on the PDAs/Mobile Devices.
Can we implement Oracle Database Mobile Server 11g and Mobile Client as mentioned in these links:
http://www.oracle.com/technetwork/products/database-mobile-server/dms-11g-datasheet-512117.pdf
http://www.oracle.com/technetwork/products/database-mobile-server/overview/index.html
I think it will be a new implementation of Oracle Database Mobile server and Mobile client and not an upgrade.
Any suggestions is welcome.
Regards,
Thiru

MFS embeds Olite into the product. Put another way, through MFS interfaces it defines/determines what functionality of mobile server can be used. Under the MFS configuration the Olite client database is used and the web-to-go app is used, there are no other choices. Very common when a software product includes some other product, it will determine what parts of the embedded product gets used.
Olite 10.3.0.3 as a separately download product used standalone has additional capability. Note: 10.3.0.3 is no longer separately downloadable over OTN.
In DMS 11.x -- we removed Olite client database, rearchitected sync to better fit BDB and allows for BDB and SQLite (either one of those can be used) on the client db. Again, MFS is only compatible with 10.3.0.3/2 right now. That team is a different development team within Oracle, on totally different release schedules than the Database Mobile Server development team. Android support was added in DMS 11.x.
thanks
mike

Database 9i, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
Regards Kai

Oracle Mobile Server 404

Similar Messages

Maybe you are looking for