Oracle modrator ---please explain the reason for locking thread

Hi,
https://forums.oracle.com/thread/2583144
and your active discussion at
https://forums.oracle.com/thread/2583143
the first above mentioned 2 threads for creating character sets with existing database without taking backups.It was crucial tasks and below mentioned thread was creating new database and find out the ways for charactersets .both are different threads and ways to work and as well as methodology
i will be highly greatful , if u can explain the reason for blocking below mentioned thread
creating addtitional database
thanks

It is all the same issue.
... manipulation and/or creation of databases with changes in character sets and how those character sets influence the functionality of the databases.
Keep your thoughts, conclusions and responses to those that reply to you in one contiguous thread.
Keep the evolution of your issue in one place.
This site is an online user-to-user forum.
It exists for more than just you.
Once your discussions are finished, others are going to read them and (hopefully) learn from them so that they don't even need to post a new thread of their own.

Similar Messages

EREC: Please explain the setup for knock-out questions in questionnaires

Hi
Can anyone help me with the setup procedure for working with knock out questions in SAP 604 SP1.4?
I know the basics, but can't seem to figure out how to set it up.
Greatly appreciated
Jakob

Hi Roman,
I also have a question regarding the Knock out questionnaires in EHP4. I have set up a single selection questionnaire. I would like to see a green light for all but one of the answers and I can not make this happen. If I mark the 4 I want green as "Expected" they appear red as does the one that I don't want to be expected. If I gradually mark them 100, 90, 80, 60, they are all green, even the one I marked with zero points. If I gradually mark them and mark them expected they are ready. I have tried 9 different variations.
Here is what it looks like:
What was your most recent PEP rating?
LP
SP
CP
IP
NP
I want green as my result if the internal candidate picks any of the first 4 and red if they pick NP. I am just unsure of how to make this happen. Any advice you could provide would be most appreaciated!
Thank you,
Kelly

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

We are all itunes users just like you. Informing us is of little use.
Contact itunes support

How to find out the reason for blocking locks?

PB Application try to create data in ASE 12.5. With this operation, there are sql, sp, trigger involved. Most of the it is okay. With lock of sleeping or sync sleeping lock. User wait for a short time to get the result.
but some time, there are blocking lock.
If spid for the app is 1. then looks like this app also generate another spid, say it is 2. and 2 is blocking by 1. spid 1 holding lock!
then all user is frozen because of spid 1 holding lock!!! How to figure it out the reason for blocking locks?

Thanks, Mark. Yes, sp_lock, sp_who, ... are common tool I used.
I found out one case like:
I have a SP which call a View for data.
When I run this SP, suppose the sipd is 1. then it will create another spid 2 because of access view and it gone very quick. This cause spid 1 block spid 2 within a short time.
If the are many user run the app, the app will be frozen and everyone is waiting. Finally it release, no dead lock, but the performance is not acceptable.
That why I have this question.

Please explain the possible reasons of manufacturing through Subcontractor.

Dear experts,
     The question was asked to me in interview -
     Why we prefer Material manufacturing by Subcontracting Procedure?
     Even though the company is having own machinery set up and man power, then also what
     Are the Reasons for manufacturing the components by Subcontracting?
     Please mention all the possible reasons on this question.
     Thanks in Advance !

Hi Kiran,
Some of the reasons for sub-contracting-
1. Cost
2. Capacity not available at our plant, due to overload or full capacity booking by other processes
3. Subcontractor has requisite tools and / or better know-how of that process.
4. The volumes does not justify carrying out the process in-house.
Hope the above was helpful.
Regards,
Vivek

TS1503 In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

You can use 1 unified Apple ID for iTunes so you don't have to repurchase apps. That part is fine.
For iCLoud/iMessage/Facetime you should each have a unique ID so the 2 phones will be separate and you won't accidentally erase each other's content and overwrite settings, nor will you get the others messaages by mistake.

Can oracle audit logs keep info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action?

Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.

2687254 wrote:
Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
Think about that. If the port or terminal (client ip address) is blocked, then the communication never got to the database. So how would the database be able to audit an action that never got there?

A consent for a new eula, please explain the ramification of these new terms

4. Your Compliance With This Agreement.
You acknowledge that your compliance with the terms of this Agreement may require you to provide certain notices to, obtain certain rights from, and impose certain obligations on your Clients and/or users of the websites hosted by the Services. To that end, you agree that each website for which Adobe provides Services on your behalf (including, if you are a Partner, your Clients’ websites) will contain a clear and conspicuous link to a terms of use and a privacy policy that comply with all applicable laws, rules, and regulations.
5. Partner Obligations.
(c) You are responsible for your Clients’ compliance with applicable laws in connection with their use of the Services.
(g) You have or will obtain all rights necessary for you to grant Adobe the licenses granted in Section 16 (“Content”), below.
16. Content.
You (if you are a Site Owner) or your End Users (if you are a Partner), and/or each such party’s respective licensors, retain ownership of any information, content and/or materials that they submit in the course of using the Services (“Content”); however, Adobe needs certain rights to Content in order to provide the Services. Accordingly, you hereby grant to Adobe and its service providers and designees a worldwide, non-exclusive, transferable, sublicensable (through multiple tiers), royalty-free, perpetual, irrevocable right and license, without compensation to you: to use, reproduce, distribute, adapt (including without limitation edit, modify, translate, and reformat), create derivative works of, transmit, publicly display and publicly perform such Content, in any media now known or hereafter developed.
please explain the ramification of these new terms
Thank you,
Lana

Hi guys,
Correct as Liam noted there are various topics on these concerns.
However if still having issues/concerns I would suggest posting in the original thread below after reviewing Magda's response.
- http://forums.adobe.com/message/4353638
Kind regards,
-Sidney

Is index range scan the reason for query running long time

I would like to know whether index range scan is the reason for the query running long time. Below is the explain plan. If so, how to optimise it? Please help
Operation     Object     COST     CARDINALITY     BYTES
SELECT STATEMENT ()          413     1000     265000
COUNT (STOPKEY)
FILTER ()
TABLE ACCESS (BY INDEX ROWID)     ORDERS     413     58720     15560800
INDEX (RANGE SCAN)     IDX_SERV_PROV_ID     13     411709
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1

The index range scan means that the optimiser has determined that it is better to read the index rather than perform a full table scan. So in answer to your question - quite possibly but the alternative might take even longer!
The best thing to do is to review your query and check that you need every table included in the query and that you are accessing the tables via the best route. For example if you can access a table via primary key index that would be better than using a non-unique index. But the best way of reducing the time the query takes to run is to give it less tables (and indexes) to read.
John Seaman
http://www.asktheoracle.net

How can I disable the Reason for Rejection field in VA02 line items

Hi,
I dont want the users to be able to change the reason for rejection field in the sales order line items. Can someone please suggest a tried and tested way of doing this
Thanks for reading.

Set up an auth object for the field. In userexit field modification check the auth object and set the field to be grayed out if they don't have authority. Users can then not change the value of the field Sample code
IF screen-name = 'VBAP-ABGRU'.
       AUTHORITY-CHECK OBJECT 'Z_BLK_REAS'
               ID 'ABGRU' DUMMY.
      IF sy-subrc EQ 0.
        screen-input = 1.
      ELSE.
        screen-input = 0.
      ENDIF.
ENDIF.

How can i get to know what is the reason for implausible meater reading?

Hi All,
I am new to this SAP -ISU.
can any body tell me how can i get the reason for implausible meater reading.
my requirement is to get the unbilled meters becasuse of unrealibility of meter reader.
here what i understood is if meater reading is not in a position to bill so it means meater reading may be in implausible state. so i want to know the reason for implausible meater reading so that i get the meters which are not billed because of unreliasility of meter reader.
in which table these reasons get store.
if any body knows about these please reply me ASAP.
Thanks in Advance.

At the very least, you will receive EXACTLY the same product you sent in. You may get a newer product. It's Apple's choice.

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

When I try to install CS6 Design and Web Premium from a disk I get this message "We are unable to validate this serial number..." What is the reason for this?

I purchased a disk copy of CS6 Design and Web Premium from a reputable seller last week and when I try to install it with the serial number I got it says "We are unable to validate this serial number for CS6 Design and Web Premium. Please contact Customer Support." What is the reason for this?
Is the serial number invalid?

Hi Ned,
Thanks for the suggestion. I eventually got in touch with Adobe Technical Support and it turned out that my Adobe Application Manager was not the latest version. They downloaded the latest version and installed it and that seemed to solve the problem. I was able to install my CS6 Creative Suite and validate the serial number. All seems to be going well at the moment.

Please explain the use of all the below movt types

Hi friends,
Can you Please explain the use of all the below movt types and how it is triggered.
901     GR Area for Production
902     GR Area External Rcpts
904     Returns
910     GI Area General
911     GI Area for Cost Center
912     GI Area Customer Order
913     GI Area - Fixed Assets
914     GI Area Production Orders
915     Fixed Bin Picking Area
916     Shipping Area Deliveries
917     Quality Assurance
920     Stock Transfers (Plant)
921     Stock Transfers (StLoc)
922     Posting Change Area
980     R/3 --> R/2 cumulative
998     Init.entry of stock bal.
999     Differences
Regards,
Balu R.V

Hi,
The below mentioned objects are interim storage types, not movement types.
Interim storage types are used as a sort of bridge between IM and WM.
MZ

Oracle modrator ---please explain the reason for locking thread

Similar Messages

Maybe you are looking for