Oracle MRP - Soft Pegging - Pegging Order?

Hi Guru's
Version : Oracle 11i
Have a quick question on pegging – order of precedence. Lets take one example – Assume there is SO with Dec 2012 Sch. Ship date and PO’s are released in July(current month) 2012 to procure required material for Dec 2012 SO.Assume,in between there is another SO created in month of Aug 2012 for the same product with sch. Ship date of Nov 2012,business is expecting MRP the reschedule existing July PO and recommend a new PO for Dec 2012 SO.
But we are given an understanding that,MRP doesnt support in that way.
It is not just in case of PO’s,even in case of receipts or WO for anything,MRP should be following the same process so that business can address orders with less lead time on priority.
Any inputs are much appreciated,
Thank you.

Hi
Please review the note What is the pegging order sequence? [ID 879482.1].

Similar Messages

Soft pegging in Oracle MRP 12.0.6

We are using Oracle MRP 12.0.6 and we run MDS MPS and then MRP. Material planner generates purchase requisition against planned orders. Planner does not use MRP workbench to generate PR but through ERP reports having pegging information he generates PR manually in purchasing module. Due to changes in soft pegging after each MRP run, material planner has to review all items again and again whether he has planned these items in previous run. We cannot use hard pegging due to some limitations. Attributes of MRP items are End Assembly/Soft Pegging.

moving this to planning community as it belongs there

Sale Order MRP Run for All Order Line Items

Greetings...
I have One Sales Order , in which i have ten different Line Items .
Now I have to Run the MRP on basis of Created sales Order so that all Line items wi get consider insingle MRP Run on sales order base MRP Run.
How to take MRP Run of One Sale Order for all Line Items.???
In MD50 , we can have sales Order with Item..

In MD50 you can give only one item at a time.
Its a standard transaction meant to accomodate changes relevant for MRP after plant level MRP run related to specific sales order Item.
so either you need to do it multipal times by changing material or you need to go for MD02.
Please explain bussiness case in detail why you want to restrict your MRP run for items in a specific sales order.
Regards

Oracle 10G gives in sorted order without order by ,in 11g it is not.

we are facing a strange problem.
we have M Views on which we perform select operation ,we put joins of M Views and get the results by select operation , the results was in sorted order (asc) and we were not using any order by clause in the select query , this was in oracle 10G.
The compelte schema where these M views are and also the underneath tables are now migrated to oracle 11g using import/export option.
Now the queries which was giving the result set in sorted order (asc), are not given the result set in sorted order anymore. it is in different order but I think at always return the same order not asc or desc but an specific random order .
we can not change the query as of now as there are 1000+ and each query would require a order by statement .
Do we have any parameters which can be change , so that we can force oracle to use a different plan so that it gives result in order ?
the select queries are very simple ones not complicated no extra function or group by is used in most of the queries.
Please suggest possible solutions . Thanks much.

Su**** wrote:
Please guide me how to go to this doc link ,i am newbi, and do not how to go to this link.
MOS Doc 345048.1 ('Group By' Does Not Guarantee a Sort Without Order By Clause In 10g and Above)
Go to http://support.oracle.com, log in to My Oracle Support, and search for 345048.1 If you don't have a My Oracle Support account, you'll need to contact whoever manages your company's Oracle support and ask them to create an account for you.
Basically, no version of Oracle has ever guaranteed the order of results if you don't specify an ORDER BY clause. In 10g, the only algorithm that was available to implement a GROUP BY happened to sort the results as a side effect. 11g introduced a new algorithm for grouping results that is more efficient and does not have the side effect of ordering the results. Most likely, your query plans have changed to use the more efficient grouping algorithm.
If you want the results to be sorted, you should add an appropriate ORDER BY clause. If you go through the MOS document, there will also be suggestions for ways that you can disable the new grouping algorithm though I would not recommend that.
Justin

MRP Run Against Sales order

Can you run MRP against a sales order , if so which tcode can i use to accomplish this.
Thank you

Did you try MD50?.
Reg
Samson

Can MRP only create planned orders for ROH, not for FERT?

HI all,
Is there any way to only generate planned orders for raw materials after MRP, forbid creating planned orders for FERT?
We want create planned orders for FERTs manually.
Thanks,
Harvey

Harvey,
Yes, that was also my understanding of your scenario. Did you try X0 for Fert? Run MRP against the entire plant, and MRP will not create any new planned orders for the X0 parts. It will explode the BOM and create dependent requirements in the components. In addition, you can create FERT planned orders manually, or using an external planning system, and these manually created orders will also create dependent demand on your components.
If you are also using Sales orders to consume your PIR, you will also have to look at requirements determination for Sales orders. This is configured based on MRP type. If you change existing MRP types, you may have to add SD config so as to continue to pass requirements to MRP. Your SD resource should be able to help you through this, or I can give you basic instructions if you decide that the PIR/demand/planned order/dependent requirements works to your satisfaction.
Rgds,
DB49

Preventing MRP run if Sales order is blocked

Hi
Relating to SAP note 744484. Is it possible to setup a similar outcome but with
this dependant on the credit block.
In other words we wish to prevent MRP generating a planned order once the credit
block is active but allow planned orders to be generated once the block is removed. This is to cater for replenishment orders should losses occur.

please check this link.
<a href="http://sap-img.com/sap-sd/mrp-block.htm">MRP block</a>
regards

Reg.MRP Run without sale order

Dear Experts
We are in need of MRP run without sale order. I have created Finished product material (T-Shirt) and assigned components to that and then I ran MRP, If I do so, MRP is exploded but result is not satisfied some non components are displayed.
What is my requirement is ,when I run MRP if there is stock availble production order should be created otherwise Material requirement has to created.
Pls help what is the configuration for MRP run,
Thanks
Rajakumar.K

Hi Raja,
One of your requirements isn't available in R/3.
What is my requirement is ,when I run MRP if there is stock availble production order should be created otherwise Material requirement has to created.
Standard MRP will create Dependent requirements (demand elements). MRP will create order PROPOSALs (purchase reqs or planned orders)(supply elements). MRP can be immediately followed by an additional program that will convert planned orders to Production orders. All these things are possible.
However, MRP will not check for the availability of components, and then selectively create production orders. Availability check, which is not part of MRP, is usually performed at a later part of the production order cycle.
Regards,
DB49

MRP RUN ON PURCHASE ORDER

Hello
i want to run mrp for inter plant purchase order, in this case i don't want to create sales order for the purchase order received from alternate plant, is it possilble to run mrp on all purchase order item without creating sales order to it?
Regards
Nishj

Hi,
I think a STO (Stock Transport Order) flow should meet your need.
In OMD9 define a special procurement key for plant which is sending you the PO.
For the special proc key maintain Proc type as F, Spl. prc type as U, then specify Plant - 2 in plant field.
In MRP - 2 view of the mtl in Plant - 1 maintain this special procurement key.
Now when MRP runs in plant - 1, it will generate a stock transport requisition for Plant - 2.
In Plant - 2 maintain a procurement key say E if its in-house. Run MRP for plant - 1 first followed by Plant - 2.
This way you wont have to follow the PO - SO flow.
Hope it is clear.
Regards,
Vivek

MRP not considering Process orders

Hello Gurus,
My pl.ind.req is 100 and I run MRP , system creates planned order for 100. When I convert this process order, the available qty in MD04 is blank. Then When I run MRP again, its creating new planned order for 100. I am thinking its every basic setting somewhere. Please help
Atul

Hello,
I resolved the issue, immediately after I posted yesterday. The issue was that on the Goods receipt tab in process orders, "Goods Receipt, Non Valuated" was checked and "Goods Receipt" wasn't. Once I checked that everything was OK. Since the GR from process order was marked as Non-valuated, MRP was not considering it. I think this is a finance setting. Will take it up with the finance guys. Thanks
Atul
Edited by: Atul Katti on Feb 11, 2012 5:06 PM

MRP generates another plan order after the first paln order is converted

Dear All,
Please help regarding my problem.
I do have one SO contains this variant item.
After running the MRP, it generates plan order for that SO item.
Then i converted it to production order. But when i run again MRP, it generates again a plan order for that requirement.
Could you help me why? It should be not since i have a production order for the demand right? or no?
Item has a settings in MM as PD, lot for lot qty, NO check for availability.
I'm hoping you could help me with my problem. is this a configuration error?
Thanks in advance.

Dear ,
We have similar kind of problem in PM . However , I have couple of question on your MTO order if you can help us :
1.Did your Sales Order goes on Credit check and you release the credit block after frist time MRP run and subsequent Production Process ?
2.Did you change the pricing date in VA02-Sales Order and again it goes to credit hold?
3.Did you carry out the planned cost at Sales order level fro MTO based on any changes in your BOM/Routing ?
4.Which Version of SAP are you working on ?
5.Why there is no Avaialibility check ? In that case , Sales Order -VA02-If you perform ATP then it will confirmed you the qty even it is not availablle .
I think as long as your MTO sales order in credit hold , it will not pass the requirement to MRP and MRP will not create planned order if the overall status is Blocked .In this case what is happing is , when you are going to deliver the Sales Order qty , pricing date is getting changed and it is going credit hola as well getting released in VKM3/VKM4 .At this juction , requirement is passing to MRP ( it should not happen if the order in credit check ) .Its totall depends on the link between Requirement Type , Requirement Class and Planning Startagey group in PIR of customizing .
Check the following SAP Note ( some of them are patches required for this issue -we had similar kind of problem in PM )
1.80891 2.1011425 3.1012344 4.408651 5.433832 6.394751
Just to cross verify the below configuration changes :
1. Maintenance of the parameters of the requirements class of the sales order-OVZG
2.Define the parameters of the requirements class of planned independent requirements-OMPO
3.Define parameters for Requirement types to requirements classes-OVZH-Check the requirement Type 105/106
4.Define Planning Startegy -SPRO-MRP-PIR -Check the Requirement Type
I suggest you to refer SAP Note 80891 and related note like 377165/744305
All the best
Try and revert us so that forum expert can help you also.
Hope the above information will be useful .
Regards
JH
Edited by: Jiaul Haque on Jun 10, 2010 10:02 AM

Oracle MES for EAM Work Order

Hi,
We know Oracle MES supports discrete Work orders.
Is it supports EAM Work Order also.
we need to introduce Clock in Clock out functionality against resources of EAM WO.
Thanks
Raman

Hi Din;
Please check below notes and see its helpful for your issue:
Department Wise Work Order Release Approvers in EAM using AME [ID 944918.1]
EAM DOCUMENT APPROVALS USING AME [ID 972652.1]
Regard
Helios

Is Oracle MRP efficient enough to reduce Inventory?Role of Lead time setups

Gurus,
I started understanding MRP these have the following questions,appreciate your inputs on below items
1)Does Item Lead time setups play a role in MRP?If Lead time setup is blank for all items,,does MRP work efficiently?
2)We just use MRP..not using any other inv rep. techniques like Min - Max etc.Our inventory is 3/4 times more than our monthsly revenues?exmaple our one month shipments are like 1 Mil.our inventory is like 4 Mil..Is it ok?how to reduce inventory?
3)how to improve our planning?
we are on 11i and discrete mfg.
thank you.

1)Does Item Lead time setups play a role in MRP?If Lead time setup is blank for all items,,does MRP work efficiently?
Lead times do play an important role in MRP. If lead times are blank, MRP will assume that all items can be procured / made in no time at all. The recommendations you get in MRP will be based on this incorrect assumption.
2)We just use MRP..not using any other inv rep. techniques like Min - Max etc.Our inventory is 3/4 times more than our monthsly revenues?exmaple our one month shipments are like 1 Mil.our inventory is like 4 Mil..Is it ok?how to reduce inventory?
Some companies have 52 inventory turns a year; some companies have 2. You are somewhere in between.There is no way for us to tell if you have too much inventory or too little. It highly depends on the industry you are in and on your business model. The best way is to compare yourself with other companies in the same market segment.
Inventory reduction is an art; not science. You can start looking at your excess and obsolete inventory and identifying patterns that lead to perceived excess. You can start looking at procurement practices. You can start analyzing MRP recommendations and acting upon them as required.
3)how to improve our planning?
You need to define what you mean by "improve". Oracle MRP is but a tool to improve planning. You need to implement a proper S&OP process to improve the planning component. You need to have a good review of your processes to "improve planning".
Sorry this is nebulous and may not help, but your question is quite generic.
Sandeep Gandhi
Independent Techno-functional Consultant

Not able to find the source requirement of MRP RUN-(for planned order)

Dear All,
Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
Regards,
Krishna

Hi
In MD04 at bottom, you can see a button for pegged requirement, click there you will come to know the list of requirement. It is not only because of Planned independent requirement you maintain in Md61, it could be due to lot size in Material master, or if you have fixed vendor in sourcelist then it could be because of Minimum order quantity with the vendor, or it could be safty stock or reorder point maintained in Material master
Regards
Antony

How can i display the MRP controller in transfer order print?

Dear all:
   When i print the transfer order(Tcode: LT31) ,i want to display the MRP controller in the output form.
How can i get that ?
I found the user exit MWMD0001 and add the code in the include like this:
   select single dispo from marc
     where matnr = ltap-matnr
           and werks = ltap-werks.
     zdispo = marc-dispo.
But caz the "zdispo" could not been brought to the "print form " of the report RLVSDR40 which control the print LT31.So ,i failed.
Anyone advice?

The problem is as zdispo is declared in your user exit it doesn't become available. Had it been declared variable in the include of the program for LT31 you would be able to use it directly in the script.
Try doing this instead in your layout set.
/: PERFORM MRP_CONTROLLER IN PROGRAM ZABCXYZ
/: USING &LTAP-MATNR&
/: USING &LTAP-WERKS&
/: CHANGING &ZDISPO&
/: ENDPERFORM
in your program ZABCXYZ.
FORM MRP_CONTROLLER tables in_par structure itcsy
                           out_par structure itcsy.
tables: marc.
data: matnr like marc-matnr.
data: werks like marc-werks.
READ TABLE IN_PAR WITH KEY LTAP-MATNR.
CHECK SY-SUBRC = 0.
MATNR = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY LTAP-WERKS.
CHECK SY-SUBRC = 0.
WERKS = IN_PAR-VALUE.
select single dispo from marc
where matnr = ltap-matnr
and werks = ltap-werks.
IF SY-SUBRC = 0.
READ TABLE OUT_PAR WITH KEY ZDISPO.
CHECK SY-SUBRC = 0.
OUT_PAR-VALUE = MARC-DISPO.
ELSE.
CLEAR OUT_PAR-VALUE.
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
This should work.

Oracle MRP - Soft Pegging - Pegging Order?

Similar Messages

Maybe you are looking for