Oracle notification server error

in the last stages of cluster installation the oracle notification server, it failed
i deleted etc/oracle , the init.crs init.evmd etc files in /etc/init.d/init*
on both nodes , & then tried to rerun the oracle notification server still its showing the same error
/bin/racgons add_config aviv2.gr.com:6200 aviv3.gr.com:6200
even i deleted the ocr,votingdisk & recreated it still the same error
is there any other way to correct it
my username is not oracle is that a problem

on both nodes , & then tried to rerun the oracle notification server still its showing the same errorWhat is the error?
but still the same Please review the log file for more details about the error.

Similar Messages

Configuration assistant "Oracle Notification Server Configuration Assistan

Facing below issue on setup of RAC in vmware
Note: Do not run the scripts simultaneously on the listed nodes.
INFO: Starting to execute configuration assistants
INFO: Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons add_config rac1.localhost:6200 rac2.localhost:6200
Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons has failed
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
any workaround pls
Regards,
Amin Anwar
Edited by: A. Anwar on Oct 17, 2012 2:24 AM

Hi,
best would be to take the actual version of Oracle (11gR2), which fixes a lot of bugs (also in installation), than to analyze problems based on old versions.
Even if you need older databases (10.2, which I don't hope since support is ending soon), you should at least think about taking the newest version for Oracle Clusterware (Grid infrastructure), .
Regards
Sebastian

Oracle App Server error

hi all,
I am tried to create new OC4J instance from App Server Control. Now OPMN is not starting. I get following error
iguration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:oracleAS.psmtech
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2007-05-17 04:45:19.328--Begin log output for Mid-tier services (oracleAS.psmtech)
2007-05-17 04:45:19.328--Processing Step: starting OPMN
2007-05-17 04:49:35.921--End log output for Mid-tier services (oracleAS.psmtech)
OPMN has thrown an unknown exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown an unknown exception
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:108)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     ... 6 more
Exception caused by
Error starting opmn server: 2
oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
I tried to validate opmn.xml file, shows following error
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)
XML parse failed: error 202.
opmnctl: opmn validation failed!
we have Oracle App Server on Windows server 2003, new installation.
plz help me with this problem.

Not sure why you exeucute opmnctl validate, but
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)opmn.xml isn't in $OH/opmn/bin directory. It's in $OH/opmn/conf.
This is quite difficult to debug from this forum. Check the logs in $OH/opmn/logs and see if that helps. Also try to shut everything down (and check that all processes are gone) and then try to restart.
Regards,
Martin

Oracle forms server error

hi all
i have installed EBS 11i on windows xp
it worked fine for last few months.now i am getting forms server error.
i can login as user and when i try to go to applications like AR transactions
jinitiator is also geting intiated.it stops at this stage and i can see the oracle logo in the back ground .but the forms do not open.
i can see the error cannot connect to the forms server.
i tried to start the frms server using adfrmsctl cmd from envshell.it says forms server already started.
can anyone help me regarding this.
thanks in advance.

yes its related to some forms generic error
it can be seen in the popup and the loading of forms stops there
i cant access the applications because it stucks there.
i can open forms like xml publisher administrator etc.but not the module based liek AR etc.
my data base works fine.

Push notification server error

i cannot remove an old push notification server that no longer exists from mail can anyone tell me how to manually REMOVE a push notification server in the mail preferences of the server admin so i can add the current server. my IP changed and i cannot connect/remove the old server name.

Hi David,
I don't have an answer for you, but I wanted to chime in because I am having problems as well. I get the same "The Push Notification System returned an Internal Server Error" message trying to send a test push via either the Debug tab in the manage.windowsazure.com
console or in Visual Studio.
I have been focused on troubleshooting this problem since yesterday (Saturday February 21) but I believe it has been happening quite a bit longer.
At one point I was able to get some notifications through after clearing all the registrations, but now it is failing again. I have had the same certificate since last April (2014) and it has worked fine, so I know the certificate setup is good.
More data points:
using the SimplePush PHP script from
raywenderlich.com with the same certificate, the notifications go through immediately.
Normally we send notifications from our Mobile Service using the Javascript backend, and it gets a "success" response from the Notification Hub even when it fails, e.g.
{"isSuccessful":true,"statusCode":201,"body":"","headers":{"transfer-encoding":"chunked","content-type":"application/xml; charset=utf-8","server":"Microsoft-HTTPAPI/2.0","date":"Sun,
22 Feb 2015 05:05:20 GMT"}}
We have another notification hub with our production certificate, and it seems to be working better.

Oracle weblogic server error

Hi every one
i have installed oracle weblogic sever 11g(10.3.4) and oracle service bus in my ubuntu 64 bit system. When i start weblogic server i am getting the following error
<13 Mar, 2014 1:01:42 PM IST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "wlsbjmsrpDataSource": java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused.>
<13 Mar, 2014 1:01:47 PM IST> <Critical> <JTA> <BEA-110482> <A logging last resource failed during initialization. The server cannot boot unless all configured logging last resources (LLRs) initialize. Failing reason:
weblogic.common.ResourceException: 0:weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused.
can you please anyone give the solutions for this porblem.

It seems like the database is down... You need to start Derby Server on port 1527...
http://docs.oracle.com/cd/E19830-01/819-4707/gbwzl/
Cheers,
Vlad

Oracle name server error

C:\>sqlplus scott/tiger@namestest
SQL*Plus: Release 8.1.7.0.0 - Production on Fri Jun 14 14:16:13 2002
(c) Copyright 2000 Oracle Corporation. All rights reserved.
ERROR:
ORA-12637: Packet receive failed
what can I do for this error.

Ok let me back up. When I go to run the report in Crystal against an Oracle Server connection - I get a popup that gives me 3 fields - Service, User ID, and Password.
Where does Service go? What property do I set to connect to my oracle database? Server? Servername?
Because I'm setting all 3 here (PreQEServerName, Server, ServerName) to the service and its giving me the 'Error finding JNDI Name'. Am I missing a property - should I be referring to a 'Service' property?
private static void switch_tables(DatabaseController databaseController) throws ReportSDKException
final String SERVICE = "mydb.world";
final String USERID = "myusername";
final String PASSWORD = "mypassword";
//Obtain collection of tables from this database controller.
Tables tables = databaseController.getDatabase().getTables();
//Set the datasource for all main report tables.
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
//Change connection information properties.
IConnectionInfo connectionInfo = table.getConnectionInfo();
PropertyBag connInfoProperties = new PropertyBag();
connInfoProperties.putBooleanValue("Trusted_Connection", false);
connInfoProperties.put("PreQEServerName", SERVICE);
connInfoProperties.put("Server Type", "Oracle Server");
connInfoProperties.put("Database DLL", "crdb_oracle.dll");
connInfoProperties.put("ServerName", SERVICE);
connInfoProperties.put("Server", SERVICE);
connectionInfo.setAttributes(connInfoProperties);
//Set database username and password.
if (USERID != null) {
connectionInfo.setUserName(USERID);
connectionInfo.setPassword(PASSWORD);
connectionInfo.setKind(ConnectionInfoKind.SQL);
table.setConnectionInfo(connectionInfo);
//Update old table in the report with the new table.
//ERROR comes from this line: 'Error finding JNDI name (mydb.world)'
databaseController.setTableLocation(table, tables.getTable(i));
}/switch_tables/
Edited by: kisetta on Oct 6, 2010 8:01 PM

ORACLE NOTIFICATION SERVER CONFIGURATION ASSISTANT(CLUSTERWARE)-FAIL

While Installing Oracle RAC Release 2 on Solaris 10 with NFS Mount, i am running into the following issue.
Step 1:
./root.sh
bash-3.00# ./root.sh
WARNING: directory '/opt/oracle/product/10.2.0' is not owned by root
WARNING: directory '/opt/oracle/product' is not owned by root
WARNING: directory '/opt/oracle' is not owned by root
chown: /data/media/RAC/voting/CSSVoteDisk0.dbf: Not owner
1
bash-3.00#
Step 2:
cd /opt/oracle/product/10.2.0/crs_1/cfgtoollogs
-bash-3.00$ ./configToolFailedCommands
PRIF-12: failed to initialize cluster support services
I believe the issue, here is location of ocr.loc file. I do not have ocr.loc file created yet.
$cat oifcfg.log
2007-05-10 13:37:48.612: [ COMMCRS][1]clsc_connect: (10043a620) NS err (12545, 12560), transport (515, 95, 0)
2007-05-10 13:37:48.614: [ OCROSD][1]utgdv:2:ocr loc file cannot be opened
2007-05-10 13:37:48.614: [ OCROSD][1]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2007-05-10 13:37:48.615: [ OCRRAW][1]proprinit: Could not open raw device
2007-05-10 13:37:48.615: [ default][1]a_init:7!: Backend init unsuccessful : [33]
2007-05-10 13:37:48.615: [ CSSCLNT][1]clsssinit: error(33 ) in OCR initialization
Any Thoughts.
Thanks
-Prasad
Message was edited by:
pinjam
Message was edited by:
pinjam
Message was edited by:
pinjam

Just in case anyone finds this thread, the problem is that the NFS mount is not configured properly, and thus the root.sh script is failing almost straight away.
Ensure that the NFS server has the following options in /etc/dfs/dfstab (Solaris 10) to allow root access:
share -F nfs -o rw,root=orac1.domain.com:orac2.domain.com /oraclerac/crs_files
share -F nfs -o rw,root=orac1.domain.com:orac2.domain.com /oraclerac/oradata
You can find out if this is the problem simply by (as root) trying to chown a file anywhere on the NFS mount.
Output of the root.sh script should be more like this:
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
etc etc

Notification Server error 2, Registry Key not found?

Hello everyone,
I've got more of a cosmetic problem as it seems atm. When checking the Component Status, I see some red crosses in a couple of components. Two being SMS_SITE_COMPONENT_MANAGER and SMS_NOTIFICATION_SERVER. The site itself seems to be working okay, although
it has some problems here and there, but nothing too troubling.
The first error, located in SMS_SITE_COMPONENT_MANAGER, states that a the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer cannot be written and returns error code 6 - handle invalid.
The second error, located in SMS_NOTIFICATION_SERVER, states that the above mentioned key cannot be found and returns error 2 - cannot find file specified.
I've checked the registry and the key is definitely there. I also checked the permissions and local service, system and the Primary Sites computer account have full permissions.
The Key contains three values:
- Default - REG_SZ - No Data
- Reserved 1 - REG_SZ - No Data
- Reserved 2 - REG_SZ - No Data
I've found this
thread that suggests a site reset as the solution, but that was already done two weeks ago and it's currently not an option as this is a live production system.
Any suggestions?
Best Regards,
Fred

Hi Torsten,
I'm getting the following entries in sitecomp.log:
Component SMS_NOTIFICATION_MANAGER is running.
Writing component specific registry values.
Cannot get copy of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer registry key on server V000C00001.ODIE.CORP.DIR. The operating system reported error 6: The system cannot find the file specified.
STATMSG: ID=579 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_COMPONENT_MANAGER" SYS=site.domain.com SITE=P00 PID=12940 TID=4816 GMTDATE=Mon May 05 07:35:25.898 2014 ISTR0="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Component SMS_NOTIFICATION_SERVER is running.
I've also checked bgbserver.log and I'm getting the following entries there:
Register a DB connection...
BgbServerController COM wrapper object 59429902 is successfully initialized
Error: CBgbServer::ReadRegistrySettings - Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer on the server. The operating system reported error 2:
STATMSG: ID=578 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_NOTIFICATION_SERVER" SYS=site.domain.com SITE=P00 PID=8440 TID=11628 GMTDATE=Mo Mai 05 09:11:07.219 2014 ISTR0="HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Error: Failed to read settings from registry
Failed to initialize BGB server. Wait 300 seconds to do initialization again
Hope this helps somehow.

SMS Notification Server error cannot install bgbisapi.msi

Hi All,
I have never experienced this error until now.
<04/18/14 09:02:18> New SMSBGB is the same product code. This is a minor upgrade.
<04/18/14 09:02:18> Enabling MSI logging. bgbisapi.msi will log to F:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<04/18/14 09:02:18> Installing F:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="F:\Program Files\SMS_CCM" CCMSERVERDATAROOT="F:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/18/14 09:02:22> bgbisapi.msi exited with return code: 0
<04/18/14 09:02:22> Installation was successful.
<04/18/14 09:02:22> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "F:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<04/18/14 09:02:22> CTool::RegisterComPlusService: Failed to unregister F:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<04/18/14 09:02:22> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"F:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "F:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<04/18/14 09:02:22> CTool::RegisterComPlusService: Failed to register F:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<04/18/14 09:02:22> Cannot register BGB server channel DLL F:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<04/18/14 09:02:22> Fatal MSI Error - bgbisapi.msi could not be installed.
<04/18/14 09:02:22> ~RoleSetup().

roperty(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 105018024
Property(S): PrimaryVolumeSpaceRequired = 416
Property(S): PrimaryVolumeSpaceRemaining = 105017608
Property(S): INSTALLLEVEL = 1
Property(S): PrimaryVolumePath = F:
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
MSI (s) (B8:88) [09:02:22:564]: Note: 1: 1728
MSI (s) (B8:88) [09:02:22:565]: Product: BGB http proxy -- Configuration completed successfully.
MSI (s) (B8:88) [09:02:22:565]: Windows Installer reconfigured the product. Product Name: BGB http proxy. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (B8:88) [09:02:22:568]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:88) [09:02:22:568]: MainEngineThread is returning 0
MSI (s) (B8:78) [09:02:22:570]: RESTART MANAGER: Session closed.
MSI (s) (B8:78) [09:02:22:570]: No System Restore sequence number for this installation.
=== Logging stopped: 4/18/2014 9:02:22 ===
MSI (s) (B8:78) [09:02:22:573]: User policy value 'DisableRollback' is 0
MSI (s) (B8:78) [09:02:22:573]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:78) [09:02:22:573]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:78) [09:02:22:573]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:78) [09:02:22:575]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (B8:78) [09:02:22:575]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:78) [09:02:22:575]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:78) [09:02:22:576]: Destroying RemoteAPI object.
MSI (s) (B8:F4) [09:02:22:576]: Custom Action Manager thread ending.
MSI (c) (E8:20) [09:02:22:577]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E8:20) [09:02:22:577]: MainEngineThread is returning 0
MSI (c) (E8:48) [09:02:22:580]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 4/18/2014 9:02:22 ===

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

500 Internal Server Error while connecting JSP with Oracle

Hello Friends,
We Have installed Oracle Applications 11i in our orgaization which run on HP-UX 11.11 (HP Unix). I have created a JSP file in which I am trying to connect the database using OracleConnectionCacheImpl Class File in oracle.jdbc.pool directory. But it shows an error message as:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I have also installed Oracle HTTP Server on my personal machine at which this code runs perfectly only the error comes when i try to connect oracle from Oracle HTTP Server installed on our HP Unix Server.
the path for pool package is:
/appltest/apps/prodora/iAS/oem_webstage/oracle/jdbc/pool
the location of JSP file is:
/appltest/apps/prodcomn/portal/TEST_test/test
What I think is I have to play with the CLASSPATh entries, but dont know how. Please help me in solving this issue...
For your reference the JSP code is:
<%@ page import="java.sql.*, javax.sql.*, oracle.jdbc.pool.*" %>
<jsp:useBean id="ods" class="oracle.jdbc.pool.OracleConnectionCacheImpl" scope="session" />
<%
try
ods.setURL("jdbc:oracle:thin:@test:1546:test");
ods.setUser("kpm_hr");
ods.setPassword("kpm_hr");
Connection conn = ods.getConnection();
Statement stmt = conn.createStatement();
Resultset rset = stmt.executeQuery("select first_name,last_name from kpm_hr.kpm_hr_emp_mst where empcode='P0580'");
rset.next();
out.println(rset.getString(1)+" "+rset.getString(2);
catch(SQLException e)
out.println(e);
} Thanks in adavnce,
Ankur

Just to verify, which relevant log files have you found?
catch(SQLException e) {
out.println(e);
} Have you search the console log file?
A quick observation reveals that your jsp is just a standalone java program executed inside jsp. Suppose you just run it as a standalone program. Any error then?
Another way going forward is to install oc4j standalone of the same version. It is very easy to install: just download the oc4j-extended.zip and unzip it and run "java -jar oc4j.jar". Put you jsp inside j2ee/home/default-web-app and run. You should see relevant log messages in j2ee/home/log/server.log and j2ee/home/application-deployments/yourApp/application.log.
You should have Jdeveloper of some appropriate version installed. If you have not, install one. It might be not a little bit high learning curve at first, but the rewards are quick and amazing, especially since jdev 10.1.3. (I am speaking from my experience.) Try it with Jdeveloper.

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Internal Server Error while running JSP file (Oracle AS - HP Unix)

Hello Friends,
I have created a JSP file in which I am trying to connect the database using oracle.jdbc.pool directory. But it shows an error message as:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
the path for pool package is:
/appltest/apps/prodora/iAS/oem_webstage/oracle/jdbc/pool
the location of JSP file is:
/appltest/apps/prodcomn/portal/TEST_test/test
What I think is I have to play with the CLASSPATh entries, but dont know how. Please help me in solving this issue...
For your reference the JSP code is:
<%@ page import="java.sql.*, javax.sql.*, oracle.jdbc.pool.*" %>
<jsp:useBean id="ods" class="oracle.jdbc.pool.OracleConnectionCacheImpl" scope="session" />
<%
try
ods.setURL("jdbc:oracle:thin:@test:1546:test");
ods.setUser("kpm_hr");
ods.setPassword("kpm_hr");
Connection conn = ods.getConnection();
Statement stmt = conn.createStatement();
Resultset rset = stmt.executeQuery("select first_name,last_name from kpm_hr.kpm_hr_emp_mst where empcode='P0580'");
rset.next();
out.println(rset.getString(1)+" "+rset.getString(2);
catch(SQLException e)
out.println(e);
Thanks in adavnce,
Ankur
Regards,
Ankur Bhatia

Just to verify, which relevant log files have you found?
catch(SQLException e) {
out.println(e);
} Have you search the console log file?
A quick observation reveals that your jsp is just a standalone java program executed inside jsp. Suppose you just run it as a standalone program. Any error then?
Another way going forward is to install oc4j standalone of the same version. It is very easy to install: just download the oc4j-extended.zip and unzip it and run "java -jar oc4j.jar". Put you jsp inside j2ee/home/default-web-app and run. You should see relevant log messages in j2ee/home/log/server.log and j2ee/home/application-deployments/yourApp/application.log.
You should have Jdeveloper of some appropriate version installed. If you have not, install one. It might be not a little bit high learning curve at first, but the rewards are quick and amazing, especially since jdev 10.1.3. (I am speaking from my experience.) Try it with Jdeveloper.

Oracle Application server 10.1.2.0.2 Installation error

Please
I am installing OAS on a oracle linux 5
when i get to 86 % of the installation process where it shift to the link page i get an error and to continue i have to ignore several erros
any idea
thank you

I found the solution. I ran the following commands it worked
Any installation of Oracle Application Server 10g Release 2 (10.1.2.0.2) on OEL 5.x or RHEL 5.x in which Reports is getting installed will fail with reports relinking errors unless you apply the required RPM listed below.You may download the RPM package from the following location:
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm]
As root, you can install this RPM package by issuing the ollowing command
# rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6. As root, issue the commands:
# mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
# ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Thanks

Oracle notification server error

Similar Messages

Maybe you are looking for