Oracle OLE DB 8.1.7.3 entry point kpcddtasg in oracommon8.dll

I have encountered a problem while installing Oracle OLE DB provider. I have Oracle 8.1.6 server installed.
After I installed the software the oracle service failed to start and the following error message was given
"the proceedure entry point kpcddtasg could not be found in the dynamic link library oracommon8.dll"
Has A.O. else encounered resolved this problem?
Henry.

oh ... I forgot to say ..
when I run query under Enterprise Manager as
select * from Openquery (db, 'select * from table')
then it will show me a pop-up message
"Query Designer encountered a MS Design Tools error:
ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider 'OraOLEDB.Oracle' reported an error.
[Microsoft][ODBC SQL server Driver][SQL Server][OLE/DB provider returned message: ORA-12545: Connect failed because target host or object does not exist]
And I follow support.microsoft.com/support/complus/mtsandoracle.asp?SD=GN&LN=EN-US&gssnb=1,setting as follow
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC\MTxOCI]
"OracleXaLib"="oraclient8.dll"
"OracleSqlLib"="orasql8.dll"
"OracleOciLib"="oci.dll"

Similar Messages

Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dl

.NET 2 (c#) Standalone application is failed to run on clean computer with subj
application compiled on VisualStudio 2005
installed Software:
.NET 2 redistribution
ODAC10202Beta.exe
The same application built with VS 2003 .NET 1 and installed ODAC101040.exe
works fine.
Thanks for any advice.

I tried the suggestion above using the MS GAC tool and I still have the problem so I am looking for any other suggestions or thoughts as to what could be wrong:
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.9.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.1.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\1.x\Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\2.x\Oracle.DataAccess.dll"
I used gacutil.exe out of "C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin" and each insert said it was successful.
The specific error I am getting in VS2008 with SP1 is: _getContextXml:Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dll' in a .NET 2.x project.
I used dependency walker and looked at both OraOps10.dll (version 1.102.2.20) and OraOps10w.dll (version 2.102.2.20) and the function OpsPrmAllocValCtx isn't in either one of them. I looked at other users machines who aren't having this problem and they have the same Oracle DLLs from the same install that I do too so I am scratching my head trying to figure out what is wrong here and would appreciate any help - and thanks in advance.

ERROR "Unable to find an entry point named OCIEnvCreate in DLL"

Hi, IÂ´am developing an ASP.net app, I have worked with asp.net and oracle before, but in this time im getting this error: "Unable to find an entry point named OCIEnvCreate in DLL" the oracle91 folder has read priveleges, I have installed ODP.net, and I keep getting this error, what can I do. Im using framework 1.1. thxs

The "Authenticated Users" group should have "Read & Execute" on the %ORACLE_HOME% folder and below. Can you verify if this is the case?
- Mark
===================================================
Mark A. Williams
Oracle DBA
Author, Professional .NET Oracle Programming
http://www.apress.com/book/bookDisplay.html?bID=378

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

Entry Point Not Found "pluginutils.dll"

Upgraded to Jabber 10.5 and now users are getting "ciscojabber.exe - entry point not found" can not be located in the dynamic link library PluginUtils.dll.

In our case, problem was in previous version of Cisco Jabber. Jabber 9.6.1 was not uninstalled correctly. Old Jabber client was successfully removed and problem is gone.

Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

Please Help me!
I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
AfterFX.exe - Entry Point Not Found
The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
Mylenium

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

TREXFilter.exe - Entry Point Not Found / sccex.dll

Hi,
Recently we've updated our TREX to SAP Netweaver 04 Version: 6.1.16.02 Build: 6116000416
When logging on to the TREX server several popups show up with errormessage:
TREXFilter.exe - Entry Point Not Found
The procedure entry point CUCheckForEmbeddedObject could not be located
in the dynamic link library sccex.dll.
In EP
(SAP Netweaver 04 EP6 6.0.16.0.0
NW 04 EP6 KMCollaboration 6.0.16.1.0)
it's not possible to index any index (index administation).
Server status in TREX monitor is all green.
Anyone seen this before?
Any help would be welcome.
Regards,
Mark

Hi,
I have the same issue with TREX 6.1 revision 25 now...
Message on OSS open but still no answer.
The pop-up is preventing TREX from processing the outstanding requests in the Queue...
Any ideas?
Kr,
Michael

Can't find DLL entry point RegisterGpibGlobalsforThread in ni4882.dll

I'm attempting to collect data using a gpib-usb interface and display the data in an Excel Spreadsheet using Visual Basic for Applications and NI 488.2 ver 3.1.2 software in Windows 7 64 bit. The macros in the spreadsheet worked fine using the gpib-32.dll in Windows XP, but not in 64 bit Windows. Switching to the ni4882.dll caused the subject error after having added PtrSafe to all of the Declare statements. I'm not an expert programmer, but I'm hoping there is an easy fix.

Hi gtr999,
Are you simply adding the PtrSafe keyword to the gpib-32.dll function calls in your adaptation? Switching to ni4882.dll requires some modification of your code. I assume you are using VBA7. You could also port your code to the NationalInstruments.NI4882.dll assembly, which contains the .NET API that is easier to use (although harder to port to)
I would suggest taking a look at this thread. Including the declarations part of your code could also be helpful here.
Xavier
Applications Engineering Specialist
National Instruments

Unable to find an entry point named 'imaqCreateImage' in DLL ...

Firstly some background:
Using Microsoft's managed extensibility framework (MEF), I've created a "Test Tool" framework which accepts plugins. The plugins are generally HW drivers with UIs. I created a NI Vision plugin which does camera discovery, acquisition and image processing. All functionality is exposed via a UI and public methods. The "Test Tool" framework shows the plugin UIs in docking panels (same VS docking panels) and provides a scripting interface for the plugin's public methods.
Ok, now the problem:
At runtime for the "Test Tool" framework and plugin I get "Unable to find an entry point named 'imaqCreateImage' in DLL ...". After a quick debug: the exception is thrown when instantiating the Imageviewer control in NI Vision plugin UI.
I created a plugin test environment which simply references the plugin and adds the plugin's UI to a form. This works correctly at runtime.
In addition, if I remove the Imageviewer controls from the plugin, it works correctly at runtime in the "Test Tool" framework.

Have you tried ensuring that the DLL function is actually being exported? You might check out some other forums as this problem has more to do with calling our DLL than the DLL its self. I've found a few other instances of this issue on external forums but I couldn't find any internal resources as you're doing something outside the scope of the intended functionality.
http://stackoverflow.com/questions/653178/unable-to-find-an-entry-point-named-function-in-dll-c-to-c...
http://stackoverflow.com/questions/13882304/unable-to-find-an-entry-point-named
Rob B
FlexRIO Product Manager

How deploy Oracle OLE DB Provider?

What information is available to enable one to set up a simple deployment scenario for a Delphi 6.0 program that
utilizes the Oracle OLE DB Provider? (What DLL files are needed, what [if any] registry settings must be made,
what configuration files are needed, etc..) It is not viable to expect the end user to download the 45 MB file from
the Oracle site in order to obtain the functionality of the Oracle OLE DB Provider.
Thanks for your help!
Dave Eland
[email protected]

Put the Oracle Installation CD on the network and then install the Client version of Oracle to everyone's pc.
I know there are deployment wizards for VB and VC++ but this is the best i think as there are lots of dll's and it gets messy.
They will also need the tnsnames.ora entry.
Make sure you have the right licensing agreement with Oracle.

ORACLE 10 INSTANT CLIENT:The procedure entry point OCILobRead2 could not...

The problem still remain:
I've installed oracle 10g instant client
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Jan 10 12:43:40 20
PHP VERSION: php-5.2.0 for Win32
APACHE VERSION: apache_2.0.59 for WIN32
But I've the same old error when I try to restart Apache:
The procedure entry point OCILobRead2 could not be located in the dinamic link library OCI.dll
Is there anyone who can help me to solve this kind of problem?
Thanks in advance.

The solution is that you need to have Oracle 10g client side libraries
installed (or you have to recompile PHP yourself). The oci8 extension
has some version dependent code and the person who builds Windows PHP
builds it with the latest version of Oracle. I was discussing the
impact of this just this week.
Luckily Oracle Instant Client can be downloaded and used for free from
http://www.oracle.com/technology/tech/oci/instantclient/index.html
Also see
http://www.oracle.com/technology/pub/notes/technote_php_instant.html
-- cj

Sp2-0575: Use of oracle SQL feature not in sql 92 entry level.

Hi,
While logging to sqlplus I'm getting the following message
"sp2-0575: Use of oracle SQL feature not in sql 92 entry level."
and login is successful, but I'm not able to generate next value from the sequence .
t says no rows selected when i request
for nextval a
EX: select mySeq.nextval from dual; (mySeq is sequence)
Thanx,
Ravi.

What has happened is that someone has enabled the Oracle feature called as FIPS flagger.
This is a feature that Oracle provides to you if you plan to write SQL code that should be portable
to other RDBMS systems. IF you enable this flagger and use a feature which is not in the SQL standard,
Oracle will complain that use of this feature will make your application Oracle dependent, and you may not
be able to run this application against any other RDBMS.
To disable this for your SQL*Plus session do this:
SQL> set flagger off
SQL>
Once you do this it will allow you to use all SQL commands including Oracle specific extensions.

Oracle OLE DB 8.1.7.3 entry point kpcddtasg in oracommon8.dll

Similar Messages

Maybe you are looking for