Oracle on Liniux Alpha - When ?

Dear Linux and Oracle Afficionados
When you whant to get an Oracle job done an Alpha seems the
only proper way to go. With the new processor comming out in
jan 1999 at something like 8000$ for at cpu+MP doing 30 specint
an Oracle Linux Alpha port is very interesting.
Rgds
Henrik
PS: This is the question: Oracle on Liniux Alpha - When ?
null

We are looking at installing an Extreme Linux cluster using
hardware from AltaTechnologies (http://www.altatech.com) and
would very much like a version of Oracle for Linux Alpha.
We are looking at purchasing a solution in the next month.
Has anyone tested Oracle for Digital Unix on Linux Alpha? This
may very well work.
Does Oracle take advantage of 64 bit filesystems on any platform?
Would it be possible to use Oracle for x86 Linux under Digitals
(should I say Compaq's?) fx!32? I thought it was available for
Linux as well?
Peter Chen (guest) wrote:
: Judging from the support given by the Oracle Linux Development
: Team on this forum, I am not too sure whether Oracle is really
: serious about their Linux port, even on intel hardware. There
are
: a number of known bugs in Oracle on Linux (multi-threading?)
and
: especially, OAS 3.0.2 on Linux (performance issue). The amazing
: thing is that Oracle Singapore/South East Asia flatly denies
that
: the Linux support/platform exists!
: Hey, if Oracle is not serious about Oracle on Linux, even on
: low performance intel platform, you can forget about Linux on
: Alpha or PPC or SPARC platforms. Those higher performance
: platforms will compete with the (more expensive?) commercial
Un*x
: platforms.
: I am trying to replace our NT servers running Oracle with Linux
: servers, but has limited success because of some bugs in Oracle
: 8.0.5 and OAS 3.0.2 for Linux. I hope Larry Ellison doesn't
: engage in empty M$/Bill Gates bashing just because he is
envious
: of the success of M$. To prove that he is really serious about
: alternatives to NT, Oracle on Linux should be better (faster
: and more stable/enterprise support) than Oracle on NT, at least
: on the same intel platforms, at the same or lower cost.
: Regards
: Peter
: Senior Tech Support Engineer
: Henrik Lassen (guest) wrote:
: : Dear Linux and Oracle Afficionados
: : When you whant to get an Oracle job done an Alpha seems the
: : only proper way to go. With the new processor comming out in
: : jan 1999 at something like 8000$ for at cpu+MP doing 30
specint
: : an Oracle Linux Alpha port is very interesting.
: : Rgds
: : Henrik
: : PS: This is the question: Oracle on Liniux Alpha - When ?
null

Similar Messages

ORACLE Not Available - only when logged on as another user

I can't figure out what I forgot. I installed everything (RH 6.1
and standard) and can login as internal from user oracle no
problems.
When I login from a user I have granted dba to I get Error
01034: ORACLE not Available. This is in sqlplus. I am sure it is
something obvious as I had it working before my 5th reinstall.
Thanks,
Jon Griffin
null

Jon,
Are you sure that the Database is started? You will get this
error if it isn't.
Chris
Jon Griffin (guest) wrote:
: I can't figure out what I forgot. I installed everything (RH
6.1
: and standard) and can login as internal from user oracle no
: problems.
: When I login from a user I have granted dba to I get Error
: 01034: ORACLE not Available. This is in sqlplus. I am sure it
is
: something obvious as I had it working before my 5th reinstall.
: Thanks,
: Jon Griffin
null

Oracle doesn't started when When I reboot the Server.

Dear All,
I have installed 10g using ASM and Oracle-managed files on a Windows Server 2003 (Second Edition , Service Pack 1 ) system . I have put no data in, and I take the defaults. It works fine - until the system reboots.
Oracle doesn't started when When I reboot the Server.
Here is what I get from sqlplus, following the instructions to start an ASM instance:
SQL*Plus: Release 10.1.0.2.0 - Production on Mon Oct 11 10:47:53 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA0/10g/spfile10g.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA0/10g/spfile10g.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
Thanks for helping,
Debraj Banerjee

It look like your ASM instance is not yet started. Try the following:
$>export ORACLE_SID=+ASM (set ORACLE_SID=+ASM if you are on Windows)
$>sqlplus /nolog
SQL>startupThen you start up your other instance.

Oracle warehouse builder error when I execute any mapping

oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.

Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

Oracle on Linux/Alpha

Is there anything known regarding the rumour of the Linux/Alpha
port of O8, and if it is true, whether it's O8 or O8i?
I saw it at: http://www.alphalinux.org/
Thanks!
-michael
null

Hi
Sorry I think you ask if there is an Oracle release for Alpha-linux, not just linux for alpha ;)
I ask Oracle staff and the answer is that today (almost september of 2001) no.
A10!

Oracle error ORA-604 when opening a connection

I am facing an issue with my WCF service which is using ODP.NET version 4.112.2.0(x64) and Oracle 11g.
The service runs without any problems on the test servers but on production server (Windows 2008 R2) when an attempt is made to call any service method it fails with the following Oracle error code Ora-604. the message is
ORA-604: error occurred at recursive SQL level %s
The exception is thrown when a call to meethod Open is made to open a connection.
There is no inner exception. So far I have tried checking the connection string, the user permissions and setting the TNS_ADMIN environment variable but nothing has worked.
Another thing to mention is that another WCF service which uses some of the same stored procedure I am using is working fine on the same server.
Has anyone seen this before?
Thanks,
A

Do you have a login trigger?
select * from dba_triggers where triggering_event like 'LOGON%'
If so, try disabling it.
Does the working service use the same credentials as this problem service?
Are you able to connect using sqlplus, with the same credentials from the same client to the same database? If it's not an ODP.NET specific problem, the dba guys might be able to help better: General Database Discussions
Greg

Error in Oracle BI EE Analytics when running a direct database request

This is in the Oracle Answers portion of the Analytics tool. When a query is entered into the Direct Database Query text box and the "Validate SQL and Retrieve Columns" button is clicked, the columns are indeed returned (which would seem to indicate that the connection pool settings are correct etc.), but when I click on the results tab it throws an error:
View Display Error
Error generating view. You don't currently have the necessary privileges to execute Direct Database Requests.
Error Details
Error Codes: OAMP2OPY:Q4NU7XSN
Invalid Handle Of 'class saw::NQWebView *' Exception
I am at a loss trying to figure this error out - clearly it is connected to the DB since it can see column names, and I was able to use the Administration tool to create a repository which Analytics can use, so why can't I directly query my database? Any help would be greatly appreciated.

It sounds like the setting has not been set to allow you to execute a direct database query.
You can do this by logging into the Presentation services as the Administrator user. Clicking on the Settings tab and then selecting the Administration option. On the Oracle BI Presentation Services Administration window select the Manage Privileges option. This brings up the Privileges Administration window, scroll down to the Answers section (listed on the left) and check the Execute Direct Database Requests privilege setting this is defaulted to let no one execute Direct SQL request. Reset the privileges such that the group that the user trying to execute the direct database request belongs to is set to be able to execute the direct database requests. This should alleviate the error that you are getting.
I hope that this helps.
Tim

Oracle.xml.sql.OracleXMLSQLException when using OracleXMLQuery getXMLDOM()

Hi!
I am trying to reuse a code in JDeveloper to get XML from a query. I have copied the code from a method and created a new method with the copied code and changed it. The problem is that when I run the old code I now get following error:
Ett oförväntat fel har inträffat: Application: FND, Message Name: FND_GENERIC_MESSAGE.
Tokens: MESSAGE = oracle.xml.sql.OracleXMLSQLException: Det här objektet har stängts.
Vill du inte att objektet ska stängas automatiskt mellan anropen kan du granska metoden 'keepObjectOpen()'.;
This means in english something like:
An unexpected error accoured: Application: FND, Message Name: FND_GENERIC_MESSAGE = oracle.xml.sql.OracleXMLSQLException: This object is closed. If you don't want the object to close automatically between calls you can check method 'keepObjectOpen()';
the code I'm running is:
public String punchoutSomething()
throws Exception
StringBuffer sqlForXml =new StringBuffer("select pv.*"
+", cursor(select * from XXPOS_PUNCHOUT_TABLE2 c where c.vendor_id=pv.vendor_id) as contacts"
+" from XXPOS_PUNCHOUT_TABLE1 pv where vendor_id in (");
// add all ids
SuppSummVOImpl vendorView = getSuppSummVO();
Row row;
int punchoutCnt=0;
// vendorView.reset();
Row[] selectedRows = vendorView.getFilteredRows("SelectStatus","Y");
for(int i=0;i<selectedRows.length;i++)
if(punchoutCnt>0)
sqlForXml.append(",");
sqlForXml.append(((Number)selectedRows.getAttribute("VendorId")).toString());
punchoutCnt++;
if(punchoutCnt==0)
sqlForXml.append("-1"); // make sql valid, will not return rows
sqlForXml.append(")");
// System.out.println(sqlForXml); // DEBUG
OADBTransaction tx = (OADBTransaction)getOADBTransaction();
OracleXMLQuery xq = new OracleXMLQuery( tx.getJdbcConnection()
, sqlForXml.toString()
xq.setRaiseException(true); // in case of error raise an exception (default
// is to generate an error document
xq.setEncoding("UTF-8"); // not necessary?
xq.useLowerCaseTagNames();
xq.setRowsetTag("vendors");
xq.setRowTag("vendors_row");
//System.out.println(xq.getXMLString()); // DEBUG
XMLDocument suppl = (XMLDocument)xq.getXMLDOM();
XSLProcessor xslt = new XSLProcessor();
InputStream sheetStream = this.getClass().getResourceAsStream("mystylesheet.xsl");
if(sheetStream==null)
throw new Exception("Could not load stylesheet");
XSLStylesheet sheet = xslt.newXSLStylesheet(
sheetStream
StringWriter serialize = new StringWriter();
xslt.processXSL(sheet,suppl,new PrintWriter(serialize));
String returnXML = serialize.getBuffer().toString();
// System.out.println("X:"+returnXML); // DEBUG
sheetStream.close();
return returnXML;
===================
i've copied the same code into another method and only changed the sql-statment to be used and the stylesheet to use to transform the xml. Is something wrong with that?
Another question: if the xsl refers to a xsd but wihtout any path where should it be?
Thanks for the help,
Patricia

Actually, having looked at Metalink, seems that although this message may be accurate and correct,
it has been 'introduced' as part of the 9i JDBC driver.
So, I used the 8i JDBC driver I happened to have instead and that worked fine.

Bug in Oracle JDBC Driver: NullPointerException when calling clearParameters

There is a bug in the latest version of the JDBC driver that throws a NPE when calling PreparedStatement.clearParameters(). I don't need a response to this, since I have a workaround (just catching and ignoring the exception), but it should probably be fixed. I speculate that the problem only occurs when you try to call clearParameters() more than once on the same PS, but I haven't confirmed it.
It is probably an easy fix. Following is the stack trace:
java.lang.NullPointerException
at oracle.jdbc.dbaccess.DBData.clearItem(DBData.java:431)
at oracle.jdbc.dbaccess.DBDataSetImpl.clearItem(DBDataSetImpl.java:3528)
at oracle.jdbc.driver.OraclePreparedStatement.clearParameters(OraclePreparedStatement.java:3401)
at com.solarmetric.datasource.PreparedStatementCache$CachePreparedStatement.close(PreparedStatementCache.java:293)
at com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatementBatch(SQLExecutionManagerImpl.java:666)
at com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedStatement(SQLExecutionManagerImpl.java:514)
at com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeInternal(SQLExecutionManagerImpl.java:406)
at com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.flush(SQLExecutionManagerImpl.java:273)
at com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:421)
at com.solarmetric.kodo.runtime.PersistenceManagerImpl.flush(PersistenceManagerImpl.java:549)
at com.solarmetric.kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:412)
at com.sun.jdotck.api.persistencemanager.MakePersistentAssignsObjectId.testMakePersistentAssignsObjectId2(Unknown Source)
at com.sun.jdotck.api.persistencemanager.MakePersistentAssignsObjectId.testMakePersistentAssignsObjectId(Unknown Source)
at com.sun.jdotck.api.persistencemanager.MakePersistentAssignsObjectId.runTest(Unknown Source)
at com.sun.jdotck.api.persistencemanager.PersistenceManagerTest.run(Unknown Source)
at com.solarmetric.kodo.compatibility.JDOCompatabilityTestSuite$1.runTest(JDOCompatabilityTestSuite.java:493)
at junit.framework.TestCase.runBare(TestCase.java:127)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:118)
at junit.framework.TestSuite.runTest(TestSuite.java:208)
at junit.framework.TestSuite.run(TestSuite.java:203)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:325)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:524)
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Take a look at the method that is causing the NullPointerException:
public void clearItem(int i)
if (!m_dynamic && m_vector == null && i < m_vector.size())
m_vector.removeElementAt(i);
if (m_items != null && i >= m_items.length)
return;
m_items[i] = null;
return;
A NullPointerException will be thrown whenever clearParameters() is called when no parameters have yet been bound.
The first IF statement should read:
if (!m_dynamic && m_vector != null && i < m_vector.size())
A simple workaround would be to make sure that your parameter list is never empty before calling clearParameters(). Is there a patch for this anywhere?

Oracle Report Font problem when run report from oracle EBS R12

Dear All
I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
Kindly help me in this regard, because this problem i am facing from last few days.
i am waiting for your quick response.
Thanks in advance....
Regards,
Nawaz
Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

Thank you very much for your reply
I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
tell me what i have to change anything.

Oracle internal error 00600 when using Blobs

We are having problems writing rows to tables that include a Blob column. Oracle version is 10g. Table schema looks like this:
CREATE TABLE xyResetRewind ( ResetRewind NUMBER(38) NOT NULL, RowDate      DATE        NOT NULL, ForRowDate DATE        NOT NULL, DataClass    VARCHAR2(3) NOT NULL, DataType    VARCHAR2(2) NOT NULL, DataKeyVal BLOB        NOT NULL, RRStatus    VARCHAR2(3) NOT NULL, CreationDate TIMESTAMP    NOT NULL, LastUpdated TIMESTAMP    NOT NULL, User_        VARCHAR2(16) NOT NULL )
and the SQL used to write it looks like this:
MERGE INTO xyResetRewind USING DUAL ON (ResetRewind = ?) WHEN MATCHED THEN UPDATE SET RowDate      = ?, ForRowDate = ?, DataClass    = ?, DataType    = ?, DataKeyVal = ?, RRStatus    = ?, CreationDate = ?, LastUpdated = ?, User_        = ? WHEN NOT MATCHED THEN INSERT ( ResetRewind, RowDate, ForRowDate, DataClass, DataType, DataKeyVal, RRStatus, CreationDate, LastUpdated, User_ ) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ? )
The driver recommended by Oracle for 10g is version 10.2.0.4.0 Feb 2 2008. We have also tried 11.2.0.7.0 28 Aug 2008 (the 11g drivers) with no luck. We use either PreparedStatement.setBytes() or setObject passing the byte array for the BLOB content.
We then get this error:
ORA-00600: internal error code, arguments: [koklismem1: r_length is 0] , [], [], [], [], [], [], []       at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)       at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)       at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)       at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)       at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:219)       at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:970)       at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1190)       at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3370)       at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3476)       at com.inqwell.any.io.sql.AnySql.executePrepared(AnySql.java:372) .   .
Our jdbc code uses only interface methods defined in Java, so no oracle-specific stuff is used or allowed.
There seems to be very little on the internet about this problem, the only things I could find being these:
[t-5349591]
[http://e-docs.bea.com/wls/docs81/faq/jdbc.html#501544|http://e-docs.bea.com/wls/docs81/faq/jdbc.html#501544]
[http://www.gcqh.com/oracle/241|http://www.gcqh.com/oracle/241]
We haven't interfaced with Oracle for a number of years (we don't get this problem with mysql) so just for fun we tried an old version of the jdbc driver: version 9.0.2.0.0 from 6 April 2004, hmmm. Anyway, that works, but obviously this is not something we want to rely on.
Does anyone have an idea what this is and perhaps a better workaround than using ancient software?

ORA-600 is a support error. That means, you should get in touch with Oracle about it. There's not a great deal anyone here can do about it.

Oracle raise ORA-03113 when connect to a remote oracle server using toad

Hi there,
when i use the tool toad connect to a remote oracle server which located in a different city,
when i submit a query in toad,
if the query returns many rows of data, it will raise the error ORA-03113：end-of-file on communication channel,
however if the query returns only a few rows, i won't raise such error,
however, when i use sqlplus connect to that remote server, it won't raise such error,
what's the reason is, can any one tell me how to tackle this problem if using the tool toad. thanks/

hi my oracle vsersion is:
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
my oracle server is 2 nodes rac server,
and i've tried two different kind version of toad v9.6 and v10.5, and both have the same problem
once i query a table, if the result returned more than 30 rows, then it will raise that error, if query returns less than 30 rows, it's ok.
i assume it is a problem concern with network, but i don't know why no such error raise when using sqlplus ?

Oracle express hang up when two or three users are using the same login.

For developer purposes, we installed the last version of XE, and we are trying to run a small client-server application, but using the same user: login and password in two different remote PC's. The database is installed in an PC dual core with Windows XP SP2 the other PC´s are in the same local area network. The application works fine when the first (doesn't matter wich PC) but when the second or third user tries to connect the database the access from the others crashes.
Is there a security issue or user limitation in XE to avoid the same login in several remote PC´s.? Have I change a parameter?

You're right I found "alert_xe.log".
I don't understand all the messages, but I notice: the "Warning: inbound connection time out". and "LICENSE_MAX_SESSION = 0 LICENSE_SESSIONS_WARNING = 0"
I copied part of the alert_xe.log as following:
Fri Feb 08 20:30:51 2008
WARNING: inbound connection timed out (ORA-3136)
Fri Feb 08 20:32:27 2008
Memory Notification: Library Cache Object loaded into SGA
Heap size 2208K exceeds notification threshold (2048K)
KGL object name :XDB.XDbD/PLZ01TcHgNAgAIIegtw==
Fri Feb 08 20:32:58 2008
WARNING: inbound connection timed out (ORA-3136)
Fri Feb 08 20:38:19 2008
WARNING: inbound connection timed out (ORA-3136)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Feb 08 20:39:28 2008
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:758M/1014M, Ph+PgF:2289M/2444M, VA:1944M/2047M
Fri Feb 08 20:39:28 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =24
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 200
sessions = 225
__shared_pool_size = 79691776
__large_pool_size = 8388608
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 268435456
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 171966464
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300

Oracle form is slow when first login and normal after that

My Query is that one screen when queried is very slow on first login and normal with same query afterwards.What can be the cause.Forms 10g on Linux,Database 10g

I had raised this issue to Oracle. It is now considered as bug:
BUG 13005659 - PSR:PERF:BIP:POOR PERF ACCESSING CATALOG FOLDER IN BIP 11G WITH SECURITY ENABLED
The notes:
1373204.1: BI Publisher: Navigation in catalog folders is slow after enabling catalog file system security
And the fix is now included in one-off patch for October 2011:
Patch 13042018

Oracle BI Server stopped when i tried to login using LDAP

Hi,
My BI server stop suddendly when i tried to login with my LDAP username/pwd, it was working fine when i was using Adminsitrator/SADMIN, and when i tried to start it using ./run-sa.sh start it has the below error in the log:
*[oraclebi@uschilxbit01 setup]$ ./run-sa.sh start*
Oracle BI Server startup initiated.
Please wait for a while for the Oracle BI Server to completely start.
Execute the following command to check the Oracle BI Server logfile and see if it started.
tail -f /data/OracleBI/server/Log/NQServer.log
*[oraclebi@uschilxbit01 setup]$ tail -f /data/OracleBI/server/Log/NQServer.log*
*2010-01-07 15:21:32*
*[nQSError: 13011] Query for Initialization Block 'Web Catalog Group Assignment' has failed.*
*[nQSError: 23006] The session variable, NQ_SESSION.title, has no value definition.*
*2010-01-07 15:21:32*
*[nQSError: 13011] Query for Initialization Block 'Web Catalog Group Assignment' has failed.*
*2010-01-07 15:21:32*
*[nQSError: 13011] Query for Initialization Block 'Site_Map_Key' has failed.*
*[nQSError: 23005] The repository variable, PRES_SERVER_NAME, has no value definition.*
*2010-01-07 15:21:32*
*[nQSError: 13011] Query for Initialization Block 'Site_Map_Key' has failed.*
Anybody has faced a similair situation, what should i do now as i cannot connect online also as the server is down, should i delete the 'Web Catalog Group Assignment' & 'Site_Map_Key' initialization variables and upload the rpd again.
Thanks,
Amit

Hey Amit,
I've encountered that problem in the past before with Oracle REL 5. If I remember correctly it's a bug and required a patch to be applied. Definitely search metalink 3. I'll do the same and see what I can turn up.
-Joe

Oracle on Liniux Alpha - When ?

Similar Messages

Maybe you are looking for