Oracle On Microsoft Cluster

Hi all,
I am in a testing enviornment.I had Microsoft 2 node cluster set up where the failover is happing.
I installed database software on 2 nodes and from one node i configured database where my datafiles are in storage.
I copied tnsnames,listener.ora from primary node to the second node.
On primary node my database is running fine,but when the failover happens and wheni log to my database its showing TNS error.
Please help..
Regards
Bobs

Hi Bobs;
What is DB version? What is OS version?
Please see below which could be helpful for your issue:How to Set Up a Two Node Cluster for Content Server on Microsoft Windows [ID 758916.1]
Microsoft Cluster Server and Oracle Fail Safe Quick Start Guide [ID 187410.1]
RAC on Windows 2008: Oracle Grid Infrastructure / Clusterware Currently Incompatible with Microsoft Failover Cluster (MSFC) [ID 1157711.1]
Database Administration in an Oracle Fail Safe/Microsoft Cluster Server Environment [ID 221202.1]
Regard
Helios

Similar Messages

System Copy on Microsoft Cluster

Hi,
We have ECC 6.0 SR2 with Microsoft Cluster on Oracle 10.2 & Windows
2003 Enterprise edition 64bit.
Installation is ABAP+java stack
Installation of CI and DB on same host.
Virtual hostname for database is ORACLEOT1
Virtual hostname for CI is SAPOT1
We have taken Database Instance Export using sapinst sapint_use_hostname=ORACLEOT1
command and executed from command prompt, Export completed successfully.
Now, we are trying to export the Central Instance using the same command and encountered error will Export ABAP
The step runR3szchk it is showing Error
Error log:
ERROR: ExeModify for write_ddloadd failed in row 42876
       (rc = 26)
       objectname   = /1CN/LRMSCALEV02~0
       objecttype   = PRKEY APPL0
       tabart       = APPL0
       rowcount     = 0
error message returned by DbSl:
(null)
Please also suggest us for CI export, whether we need to give virtual
hostname of virtual hostname of Database or Virtual hostname of CI.
Regards,
$@ndy

Hello,
rc=26 means ' Primary key constraint violated '.Please check the
object    /1CN/LRMSCALEV02~0 according to the
note 130648 R3load export: Write_ddloadd failed (rc=101)
Also update the kernel and dbsl files from marketplace and try export again
note 19466
regards,
John Feely

Oracle on Windows Cluster

I have made a cluster of two windows based server and deployed Oracle 10g Database on both servers. Both databases are point to Virtual IP of Server. At a time only one instance of Oracle is up but when Oracle up instance is get down how second Oracle Instance will get up?
please let me know in this case i can make another instance up manually or there is another way to make instance auto up?
Kindly let me know in detail with steps
Thanks,
Waheed

Yes....if there is a failure on the primary node. It works in conjunction with Microsoft cluster services and 'transfers' the instance (also the listener, EM etc) to the other available node.

Is OWB certified with MSCS (Microsoft Cluster Server) ?

Hi Everybody,
Is OWB certified with MSCS (Microsoft Cluster Server) ?
Best Regards,
Ashraf Hussein

Hi Ashraf
Not much help but ....
So is your question more related to does the Oracle database work in Microsoft Cluster Server? I found some details on Oracle Fail Safe for operating Oracle databases in a MS cluster:
http://www.oracle.com/technology/tech/windows/failsafe/index.html
Much of the information on these pages looks fairly dated. The focus has been on Oracle RAC for clustered configurations.
Cheers
David

IBM HACMP Vs. Oracle Real Application Cluster

Hello,
We are contemplating chages in our Oracle Database on AIX. I was wondering if you can point me to a site that will help us to decide which architectiure to go with between IBM HACMP Vs. Oracle Real Aplication Cluster.
Any information will be appreciated.
Regards,

Hoep this helps,
http://www.google.com/#hl=en&q=+site:ibm.com+IBM+HACMP+Vs.+Oracle+RAC
Regards
http://www.oracleracexpert.com

STMS error message on the Microsoft cluster.

Hi,
I have successfully installed NW2004s on a Microsoft cluster. When I run STMS for the very first time on client 000, I am getting message saying "tp configruation not completely distributed".
Any ideas.
Regards,
N.S

Hi,
I will tell you the exact solution.
Login to your application server using sapgui. run the transaction SE06.
There you get an option perform post installation Actions. Click on it.
Then go to transaction stms and it will say you that you are logged in to your domain controller.
Further go to trnsaction rz10 and import profiles for all the active servers.
reward with good points.

OracleAS cold failover cluster

I am installing oracleAS cold failover cluster. but during installing a am getting error in database configuration
assistant. can anybody help me?

This is as simple as "Two heads think better that once", for this you will have two points (or more) of access to your applications, the process are split between servers and if one of the nodes fails, there are other to backup them. That's the only think that a Cold Fail Over cluster does, as well the administration is centralized if you have a nice configuration you will need to do only one configuration and all nodes will notice about it, finaly when you have a cold fail over cluster you have 50% of your potential workload in use, you have a server as a portrait that only is good to look at it but doesn't do nothing else, you dont need benchmarks or notes, this is really simple as it sounds.
Greetings.

Has anyone used Lookout 5.0 in a Microsoft Cluster?

I am trying to load Lookout 5.0 to a Microsoft Cluster. I have been succesful with the server side - cluster failover of the application and data retrieval from live and historical data. I can not get historical data from the client side.

NI does not support the use of Lookout 5.0 in Microsoft Cluster.
Joji

Urgent - SAP_ Microsoft Cluster error

Dear Friends,
We Installing our Production servers by using Microsoft cluster service. Our SID is P00
Servers name was SAPP and SAPDB
Today morning we try to start the instance in MMC it could not start. then we see the cluster service status by using Cluster manager we noticed the following errors
SAP P00_00 Service failed
SAP P00_00 Instance Offline
We checked the SAPoscol service it is running. Then we checked the Event viewer same error is repeated in event viewer.
We need your help to sort out this problem
thanks in advance
G.G.Karthickbabu

Dear Bernd,
Thanks for your quick response
All other instance are in online except
SAP P00_00 Service failed -(Generic Service)
SAP P00_00 Instance Offline -(SAP Resource)
in groups under cluster manger window
by
G.G.Karthickbabu

Oracle Linux HA cluster!!

Dear all
i am planning to implement an Oracle database HA cluster on linux. Following are the servers i am currently having.
1) Oracle 10 G database server on RHEL3
2) Oracle 10G backup server on RHEL3
3) Two Application servers running oracle 9IAS on RHEL3
I am planning to build a HA cluster with 4 node failover and loadbalancing with two database servers and two application servers.
Following is the setup i am thinking of
Two Oracle 10 G database server with failover and failback + Two Oracle 9i Application servers with service failover and failback.
All the four server are connected to the SAN storage through SAN Switch.
is it possible for me to have the following functionalities in the cluster?
a) If any one of the database server fails, the other server should take over
b) if any one of the application server fails, the other application server should run the failed service.
c) All the four nodes should be communicating to each other ,ie two database servers and two application servers.
Whether this type of a cluster is possible using Oracle 9i RAC ? kindly advise
regds
Narayanan S

Yes there is some additional steps
if you are doing clustering this should be your bible
http://download.oracle.com/docs/cd/E10291_01/core.1013/e10294/toc.htm
to install 64bit have a look at these references
http://download.oracle.com/docs/cd/B31017_01/getstart.htm
Metalink note 465159.1
cheers
James

Install Oracle BAM in cluster

Hi,
I need install ORACLE BAM in cluster. I need help or documentation.
Thanks,
Marcio

Based on the 10g Features by Edition document
http://www.oracle.com/database/product_editions.html
it appears that FailSafe is included with your enterprise edition license. What I don't know, and what you'd probably need to discuss with your Oracle Sales rep, would be how licensing works in that environment. I don't know whether you would need to license all the CPUs in all the machines in the cluster or only on one node.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Microsoft cluster

Dear All
can any 1 help me regarding the microsoft cluster
the case is that we have a delay for about 12 minutes from the moment nodeA foll down till the moment node B takes the resources
can any 1 help
thanx
Amr Osama

Hi AMR,
Try this Link.
[http://www.msexchange.org/tutorials/Implementing-Two-Node-Cluster-Windows-2003-Enterprise.html]
Thanks & Regards,
Sudheer....

Microsoft Cluster Server

Does anyone have experience setting up Forté in a Microsoft Cluster
Server (Wolfpack) environment?
If so, DOES IT WORK and what kind of things do I have to be aware of?
Thanks in advance for any information that may be provided on this
topic.
Tory Konitzer
Manager, Technical Services
Metrix, Inc. * 20975 Swenson Drive * Waukesha, Wisconsin 53186-4064
Phone: 414.798.8560 x1126 * FAX: 414.798.8573 * Email: [email protected]
http://www.metrix.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Contact the sales team. It may not be available in download section. For
documentation edocs section have a link for MSCS.
_shailesh
Yuva Raju wrote:
I am interested to setup clustering for tuxedo system. Please inform, from where
i will get BEA tuxedo Extension software.If you knows the link, send the link.
I looked into bea.com download page, i did not get about that software.
Thanks and Regards,
Yuva Raju

New Microsoft Cluster.

Years ago i did many SAP in the Microsoft Cluster Environment. I have to say that I like it, some problems can occour but the system was reliable.
At this moment we're planning new environments for the HCM servers. The Microsoft Cluster has been choosen as the main HA system. Well, I have read some documentation and many thinks are changed. The first in the new idea of the SPOFs ( single point of failures ) are the only that will be clusterized and the application servers will be installed in the local machines.
I need some clarification. We're not planning to have Application servers. Only one instance will be enough. Can I clusterize the dialog instance to avoid the local installation as I did in the past ? There is something i'm missunderstanding.
Best regards.

Hello,
The multiple SAP installation in the same cluster is fully supported by SAP. You can find the guide:
Installation of Multiple SAP Systems in MSCS. MSSQL Server in:
https://service.sap.com/installnw70
Link:
Installation Guide - SAP NetWeaver 7.0 including EHP 1,
And dowload the guide under Multi-SID Installation on Windows MSCS.
I think that i will test it under lab conditions using vmware trying to understand the process. My main problem is that this are going to be installed by external consultants and I need to know all the process in order to avoid potential problems in the project start.
Best regards.

Add GNS and Configure Oracle Infrastructure for Cluster failed

hi
i tried to install Oracle Grid 11g on Oracle Linux EnterPrise edition but i got the following error while
creating the Root.sh files.
*Add GNS 192.168.138.131 -d nisha.......failed
*Configure Oracle Infrastructure for Cluster failed.
plz help me out thanks in advance...

hi
thanks for reply.
if i did not give GNS name then i cannot install it because without GNS i am not able to install
is there anyway to install without GNS?
and if i want to install Typically then its also asking for Scan name
so plz guide me what is scan name and how to configure?
@Levi Pereira
because without that i am not able to install the software plz if i am wrong then
help me out how to install without GNS?
Edited by: nisha on May 17, 2011 4:56 AM

Oracle On Microsoft Cluster

Similar Messages

Maybe you are looking for