Oracle on SuSE Linux 6.0-6.1-6.2
If you are installing Oracle 8.0.5.0, Oracle 8.0.5.1,Oracle
8.1.5 (8i),Oracle WebDB 2.0.5.6.1,or Oracle OAS 4.0.7 please
check the following page out for instructions...
http://www.suse.de/~mha/oracle/
null
Oracle ias9i is certified with Oracle Server 8.1.6 and 8.1.7. When installed on the same machine, then you have to install Oracle Server first in it's own ORACLE_HOME, shut down all services after installation, and install ias9i in it's separate ORACLE_HOME. As you shut down all services of the database installation (and have no datbase up at installation time of ias9i), you have to start all database related parts of ias9i installation after the software install: bring up database, define tnsname for it in ias-home and start Portal Configuration Assistant. When you install ias9i, an Oracle Server 8.1.7 is installed in the same ORACLE_HOME as ias9i for the Database Cache feature only. It is not recommended to use that Installation for production databases. These hints are for NT-platform, i don't think there are differences in UNIX.
Similar Messages
-
Oracle 8i, SuSe Linux, big performance Problem
Hello,
i have a very interisting problem on SuSe Linux 7.0 (or 7.1).
Engine: Fujitsu Siemens Primargy, 4 Processors, 4 GB RAM
I want to make a hot backup.
After i set the tablespace in backup mode i make a copy of the tablespace.
On that moment goes nothing more with Oracle.
There is no input/output from/to the database. (Every select needs extremly long time)
Have anybody an idea? (I hope so)
What is the break?
Oracle or SuSe Linux? (Any other jobs do the computer all right, very quick)
Bye and thanks
Michael
nullHello,
i forgot to give a very important detail:
The load average goes from 0.4 up thru 5.X (at that moment i must kill the job)
sorry that i don't write it in the main letter.
Bye and thanks for every hint.
Michael
null -
Can't install Oracle on SuSE Linux 9.3 Pro
Hi,
i try since three weeks to install Oracle 9.2 Release 2. My last Problem was,
that i didn't know how to log in as the created Oracle User. This Problem is solved.
But when i install Oracle as the Oracle User and try to configure the Administrator
Group, i get the error, that i don't have the specific permission to change that,
so i gave the Oracle User all Rights about every directory (chown oracle:dba / ).
After that the Installation proceed without any problem, but after the Installation,
the Database Configuration Assistant failed to install and two other Assistants, too.
So, i don't know where there problem is. I fulfilled every pre-installation Task, but
it still isn't possible for me, to install Oracle 9.2 on a SuSE Linux 9.3 Professional
System.
If anyone could help me along this Installation, i would be very thankful.
Thanks a lot
DanielBut when i don't give the oracle user all rights, it isn't possible to proceed with theinstallation
But if you give that rights then it's a security hole. According to your words I guess you have similar enviroment settings:
ORACLE_BASE=/
ORACLE_HOME=/<directory_name>
Why you not installing on deeper directory such as /opt or some your own directory? For example
ORACLE_BASE=/myoracledir
ORACLE_HOME=$ORACLE_BASE/<directory_name>
Then chown -R oracle:dba /myoracledir.
Then oracle will be owner just for /myoracle directory and all its subdirectories.
i just could look at the error details, but they didn't described the erroranyway.
That's not so true. Error log you could find in /tmp/OraInstallYYYY-MM-DD_HH_MI_SS.. -
Installation Error ECC6.0 + Oracle 10202+ Suse Linux 10 ( 64 bit )
Hi all,
We are installing ECC 6.0 with Oracle 10202 on Suse Linux 10 ( 64 bit ) machine.
We are facing error in the Import ABAP phase.
Below is the error:
Import Monitor jobs: running 1, waiting 1, completed 35, failed 0, total 37.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 35, failed 1, total 37.
ERROR 2008-02-25 23:56:45
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-25 23:56:45
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
We stopped the installation and restarted the database, but its didnt worked.
Any ideas in resolving the error ...!
Kind Regards
NeenadHi all,
error lines - th_act_em_hdl
It is a problem with time zone .. current time zone is zzz & changed to AST (Arabic standard time).
Re: ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
-rahul
Edited by: Rahul on Nov 26, 2009 10:43 AM -
How to automatically startup Oracle on SUSE Linux
I have Oracle 11g installed on a server running SUSE Linux 11. I followed the official Oracle instructions to try to set up Oracle for automatic startup.
My /etc/oratab file contains the following:
sidname:/opt/oracle/product/11gR2/db:Y
I created a /etc/init.d/dbora file, which contains the following:
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/opt/oracle/product/11gR2/db
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
PLATFORM=`uname`
export ORACLE_HOME PATH
if [ ! "$2" = "ORA_DB" ] ; then
if [ "$PLATFORM" = "HP-UX" ] ; then
remsh $HOST -l $ORACLE -n "$0 $1 ORA_DB"
exit
else
rsh $HOST -l $ORACLE $0 $1 ORA_DB
if [ "$PLATFORM" = "Linux" ] ; then
touch /var/lock/subsys/dbora
fi
exit
fi
fi
case $1 in
'start')
$ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
$ORACLE_HOME/bin/dbshut $ORACLE_HOME &
echo "usage: $0 {start|stop}"
exit
esac
exit
Then I ran the following commands:
chgrp dba /etc/init.d/dbora
chmod 750 /etc/init.d/dbora
ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora
ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
shutdown -r now
After restarting, Oracle was not running:
server:~ # ps -fea | grep ora
root 2681 2563 0 21:18 ? 00:00:00 hald-addon-storage: no polling on /dev/fd0 because it is explicitly disabled
root 2688 2563 0 21:18 ? 00:00:00 hald-addon-storage: polling /dev/sr0 (every 2 sec)
root 4491 4333 0 21:19 pts/1 00:00:00 grep ora
server:~ # ps -fea | grep lsnr
root 4493 4333 0 21:19 pts/1 00:00:00 grep lsnr
Oracle runs fine after I start the instance (by logging into sqlplus as "sys as sysdba" and issuing the "startup" command) and listener. But it won't start up automatically after restarting the server. Why is that?I got it working. I had to change the dbora file to look like this:
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/opt/oracle/product/11gR2/db
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
export ORACLE_HOME PATH
touch /var/lock/subsys/dbora
case $1 in
'start')
su - $ORACLE $ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
su - $ORACLE $ORACLE_HOME/bin/dbshut $ORACLE_HOME &
echo "usage: $0 {start|stop}"
exit
esac
exit
Then I had to delete the listener.log and startup.log files in $ORACLE_HOME because they were incorrectly owned by root. -
Issue while installing oracle in suse linux 11
Hi all,
When i try to execute runinstaller from root its not allowing me to run.
I am trying to install oracle 10g.
./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-03_07-00-51AM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Is there some thing we can do to bypass and install with root.Thanks.Ambarish annapureddy wrote:
>
> Is there some thing we can do to bypass and install with root.Thanks.
No, please install using orasid.
Thanks -
Oracle 8i, SUSE Linux, Segmentation fault
When I hit the ./runInstaller it just bombs out with
segmentation fault at line 34. It looks like the runInstaller
script is running runInstaller (again?).
nullIs Suse using Glibc 2.1? Oracle requires glibc 2.1 and a seg
fault might be an indication your machine does not have this
capability.
Either install glibc 2.1 on your machine, or move to a distro
that is glibc 2.1 native (RedHat 6.0).
Best of Luck,
--Bryan
nick lockyer (guest) wrote:
: When I hit the ./runInstaller it just bombs out with
: segmentation fault at line 34. It looks like the runInstaller
: script is running runInstaller (again?).
null -
Hi.
Our company has to choose one of the following OS:
1. Red Hat Enterprise Linux 3
2. Suse Enterprise Server 8
for our new Oracle9i DB server. Can someone suggest one and explain why he choose that? Is there any web site where I can find some tests to compare this two products?
Thanks.Hi
I am using Oracle With SuSE for last 2 years .I have seen the following advantages
SuSe have a very good Oracle on SuSE Linux forum which have lot of participants
some very useful RPMs for automatic startup and shutdown and for setting kernel parameters during startup.
Installation was always easy and no crashes at all .
Currently I am running SLES8 and oracle 9iR2 (database and apps server ) with Async-IO
The only problem I found was hyperthreading CPUs but that may generic to all distributions
HTH
Santhosh -
Successful instalation of Oracle on SuSE !!!
I have installed Oracle for SuSE Linux 5.3 with same patchs.
Take a look on
http://www.suse.de/Support/sdb_e/fehr_oracle_1.html
Even this documentation is mistakes and can be resolved easly.
When you apply the patch, may be you will see missed files about
openwin. Don't worry about it.
The follow enviorement should resolve installation troubles:
export GCC_EXEC_PREFIX=/usr/lib/gcc-lib/i486-linux-libc6/
export ORACLE_HOME=/home/oracle/ora8 # or Where do you want to
install
export
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/bin:/usr/i486-
linux-libc6/lib
export ORACLE_BASE=$ORACLE_HOME
export ULIMIT=2113674
export ORACLE_SID=ora8 # or your SID
export PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/lib:/usr/i486-
linux-libc6/lib
Add this enviorement to your .profile oracle user due always you
will need.
Then run orainst program.
DON'T install Oracle Intelligent Agent and jdbc at firt time.
Add second patch program when your Oracle is completed. Then you
are able to add Oracle Intelligent Agent. It is better and don't
require to change source files or copy it to your hard disk.
nullHi,
Have You executed xhost + ?
If not , open another terminal session as root user and execute it. Back to terminal window of oracle user session and execute the runInstaller.
Regards,
Cerreia
Edited by: Cerreia on 25/09/2009 21:51
Edited by: Cerreia on 25/09/2009 21:59 -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Installation problem Oracle 9i on SuSE Linux 7.2 s390
Hi all
I've got a problem after having installed Oracle9i on a S390 box with SuSE linux 7.2. When I launch sqlplus, I've got the following message :
sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot load shared object file: No such file or directory
It appears the shared library libclntsh.so.9.0 was not included in the tarball I've downloaded from the Oracle site.
Any idea ?
Thanks
Frangois BasquinForget my question : I've found the answer in the document ID 158104.1. Even if my problem was not exactly the one mentioned (I hadn't any problem during compile time), the cure was good.
Frangois -
Problem with installing Oracle 10g on Suse Linux
Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fictionYes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again. -
Installation: Oracle 10g on SUSE Linux 10.1
Can this be? I sat for hours preparing my all new clean SUSE Linux 10.1 server for the installation of Oracle 10g (Standard Edition)... and when running the installer it simply tells me that SUSE 9 is needed...
I've found others here in the forum having experienced the same.
Maybe I just downloaded the wrong version of Oracle?
The main download page is at:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
I selected entry "Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86" (the one directly below the Windows version):
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html
The size of the file^^ is 668,734,007 bytes.
Or should i have downloaded entry "Oracle Database 10g Release 2 (10.2.0.2) for z/Linux":
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10202zlinuxsoft.html
The size of the file^^ is 838,518,746 bytes.
By the way, all these versions on the main page should have some kind of description, something like "This is the Linux Version for most standard 32Bit single and multiprocessor Intel compatible servers."
Well, since I'm completely stuck now with SUSE 10.1, is there any way to make the Oracle installer go on that SUSE version? Maybe SUSE can pretend to be version 9... but how do I achieve something freaky as this?
Thanks for any help, comments, suggestions...
KarstenBTW, I think it's bad practice by Oracle not supporting SUSE 10.1.Actually, I think it is good practise for Oracle not to certify the public beta versions of an operating system.
Please remember that Fedora and SuSE Linux are cycled every 6-8 months, making then truly unstable for commercial purposes. IN addition, they are often desupported by the comminuty within 2-3 years, forcing upgrades. And finally, Both Red Hat and SuSE/Novell publically state that these are 'proving grounds for new features' (meaning they are beta).
Certification means that Oracle will invest heavily and train people on the specific operating system and work with the operating system supplier, 24x7 if needed, to make sure that customers will continue in production. I am not aware that the SuSE Linux or Fedora supporters are willing to put in 24x7 support they way the Red Hat and SuSE Enterprise groups are.
This does not imply the public OSs are bad. It just means that Oracle (and I) believe they are unsuited for commercial, business mission critical, immediate support required, environments.
By the way, I have the combination of Oracle10g and SuSE Linux 10.1 working, and it works well. However, I did need to make sure that the libraries to which Oracle10g was compiled are available in the OS.
Or maybe Sybase does better.... ;-pNot if the [glibc] libraries are incompatible. Nor does PostgreSQL nor MySQL. -
Installation of Oracle EBusiness Suite 11i Release 10.2 on Suse Linux 9
Hi,
I have been going thru this forum and got some great tips but am still having problems installing it on Suse Linux Enterprise 9. The reason for failure is at 20% - adrun9i.sh script. Initially it was giving me error while unzipping the files, now it passes that step but gives error while configuring db. I am not sure what the problem is. I have set all the possible kernel parameters. Any help is appreciated?
Thanks in advance,I had the same issue, though I cant remember the percentage anymore, but it was whilst on Database Disk 2.
What I found out was that the DVD in which that zipXX file was had a CRC error, and the size of the .dbf (I think it was a xxxtx.dbf file) was smaller than expected, cos I manually unzipped this file during a rerun of the installation which finally succeeded. Unfortunately, the DB srung the error after I tried forcing it to mount and open.
I have now installed the same on SLES9, after I downloaded a fresh set of files from edelivery.oracle.com ( Its a nightmare if you have a slow broadband - Lasted me about 2 weeks, using a download manager)
You can see the article written by Micheal B on coolnotes in the Novell site, and get in touch if further assistance is needed.
Good Luck if you havent given up on the idea -
Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0
Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PMHi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.
Maybe you are looking for
-
Hi I just purchased a plasma tv and was wondering about getting a mac mini to connect to the display to surf/play downloads. However the mac mini would be hidden in a cupboard. Is there an RF keyboard/mouse available? Thanks [email protected]
-
Handle multiple material numbers as import parameter in a function module
Hello Folks, I want to handle multiple material numbers as import parameters.. I have tried using table types but having problem while reading the data.... My requirement is user will input say 10 materials , now i need to get all the information for
-
Why can't i import my Photos Library into iMovie on Yosemite
i recently downloaded the Yosemite update. I've now convert iPhoto into Photos. When i use iMovie and try to import either my old iPhoto library OR my new Photos library, there is no content in either one. The libraries aren't selectable. What am i d
-
Why does Aperture 3.4.5 freeze when making a slideshow?
I have tried two methods of creating a slideshow: 1. Using the 'play slideshow' option from the File menu. 2. Using the 'new - slideshow' option from the File menu. In the first case, Aperture simply freezes. The choice of 'theme' (Classic, Ken Burns
-
No booking after running ASKB and AFAB
Hello dear all, After launch the transaction ASKB and AFAB the system has not make any booking in area 07. Anyone can tell me why ? Thank you in advance Tarek