Oracle Patch 11.1.0.6 -- 11.1.0.7 installer problems on linux

Hello,
i will do an upgrade and i downloaded patch file "p6890831_111070_Linux-x86". So i extractet the folder and call ./runInstaller.
But if i do this i get an error message: "./runInstaller: line 197: /home/oracle/patch: Datei oder Verzeichnis nicht gefunden" That means in english "File or Folder not found".
On line 197 i've found: $CMDDIR/install/.oui $*
What is the problem? What do i wrong?
I use RHEL 5!
Edited by: user6368351 on 08.10.2009 14:20

Hello,
i have done an upgrade from 10.2.0.4 to 11.1.0.6. There was no problem and 11.1.0.6 works right now. But i can't run the installer for the 11.1.0.7 patchset.
EDIT:
If i run the installer with root, so i get the typical message:
Oracle Universal Installer wird gestartet...
Temporärer Speicherplatz wird überprüft: muss größer sein als 80 MB. Tatsächlich 202209 MB Erfolgreich
Swap-Speicher wird überprüft: muss größer sein als 150 MB. Tatsächlich 5887 MB Erfolgreich
Monitor wird überprüft: muss so konfiguriert sein, dass mindestens 256 Farben angezeigt werden. Tatsächlich 16777216 Erfolgreich
Vorbereitung für das Starten von Oracle Universal Installer aus /tmp/OraInstall2009-10-12_12-03-07PM. Bitte haben Sie einen Moment Geduld...
Der Benutzer ist root. Oracle Universal Installer kann bei einem Root-Benutzer nicht mit der Installation fortfahren.
This means, i have to run the installer with an oracle user.
But ich I will run it with oracle rights, the installer will not run.
Edited by: user6368351 on 12.10.2009 03:04

Similar Messages

Oracle SOA Suite 10.1.3.4 (OC4J) HA cluster installation on RH Linux 64 bit

We plan to install Oracle SOA Suite 10.1.3.4 (OC4J) HA cluster on Red Hat Linux 64 bit operating system.
Are there any special instructions for 64 bit install compared to regular 32 bit install?
Any inputs will be really helpful.
-Thanks
VJ

Yes there is some additional steps
if you are doing clustering this should be your bible
http://download.oracle.com/docs/cd/E10291_01/core.1013/e10294/toc.htm
to install 64bit have a look at these references
http://download.oracle.com/docs/cd/B31017_01/getstart.htm
Metalink note 465159.1
cheers
James

Oracle 9.0.1 installation problem on Linux 7.2

I am getting the following error while installaing the Oracle 9.0.1 on Red Hat Linux 7.2.
"I/O error while opening or reading /tmp/OraInstall/temp8"
The installation is being done with "oracle" user and oracle user has complete read/write rights on /tmp and it's sub-folders.
Any suggestion in this regard will be highly appreciated.
Regards,
Asif Ijaz

well u need to run a patch which is u can download from oracle site itself before starting ur installation
and patch name is 'binutils-2.10.0.18-1.i386.rpm'
mostprobable this will sort out ur problem

Installation problem on Linux Slackware 7.1 (Oracle 8i)

I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....

Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null

Oracle 10.2.0 DB installation problem on Linux RedHat 4

When I install Oracle 10g release 2 database on my Linux RedHat 4 platform, I got the following error message (from action log file):
INFO: /u01/app/oracle/product/10.2.0/db_1/bin/genorasdksh: Failed to link liborasdkbase.so.10.2
INFO: make: *** [liborasdkbase] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'all_no_orcl ihsodbc' of makefile '/u01/app/oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2006-10-05_11-17-26AM.log' for details.
Exception Severity: 1
Can someone help me to solve this problem?
Your kind assistance will be highly appreciated!

I didn't install the whole OS but just some packages that contain required rpms by Linux Redhad 4. I guess I accidently missed a package. In order to make sure that I have installed all necessary packages, I just re-installed the OS with care. Thanks for your advices.
The Oracle DB installation was successful, however, after I installed the Oracle HTTP Server and then stop the HTTP Server, I can't start it again. The following is the error message.
[oracle@linuxkm database]$ /u01/app/oracle/product/10.2.0/http_1/opmn/bin/opmnctl startproc ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================
opmn id=linuxkm:6200
0 of 1 processes started.
ias-instance id=standalone
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=23484)
failed to start a managed process after the maximum retry limit
Log:
/u01/app/oracle/product/10.2.0/http_1/opmn/logs/HTTP_Server~1
Thank you very much for your help!

Re:oracle 8.1.6 release 2 post installation problem on linux

hi,
While installing oracle 8.1.6, the one of the optional tool database configuration assistant failed.(DBCA-00047 : unable to create destination directories).
so i tried to create database manually.
so i copied init.ora file as initdemo.ora and edited the file as follows:
db_name=demo
controlfiles=('/disk1/oradata/demo/system01.dbf','/disk2/oradata/demo/system02.dbf')
cdump=/disk1/oradata/demo/cdump
bdump=/disk1/oradata/demo/bdump
udump=/disk1/oradata/demo/udump
then i saved the file.
After that i created a script for database creation as "demo.sql" to create database at nomount stage.
i.e,
create database demo
logfile group1('/disk1/oradata/demo/log1.log',/disk2/oradata/demo/log2.log') size 1000k
group2('/disk1/oradata/demo/log3.log',/disk2/oradata/demo/log4.log') size 1000k
controlfile reuse;
and saved it.
I gave the following commonds at the prompt:
$export $ORACLE_SID=demo
$svrmgrl
SVRMGR>connect internal
connected.
SVRMGR>startup nomount
here i got stuck up as it is not getting starting the instance.
so i tried in SQLPLUS mode
$sqlplus
username/password: sys/oracle as sysdba
Instance is idle.
SQL>startup nomount
LRM-00109 couldnot open parameter file.
ORA-01078 failure in processing system parameters.
so can you tell me where iam going wrong.
Praveen
[email protected]

The problem is you did not provide a pfile location for the parameter file. Please refer to the sample shell script below where it makes the right calls:
#!/bin/sh
ORACLE_SID=test
export ORACLE_SID
/u01/app/oracle/product/8.1.6/bin/svrmgrl << EOF
spool /u01/app/oracle/admin/test/create/crdb1.log
connect internal
startup nomount pfile = "/u01/app/oracle/admin/test/pfile/inittest.ora"
CREATE DATABASE "test"
maxdatafiles 254
maxinstances 8
maxlogfiles 32
character set US7ASCII
national character set US7ASCII
DATAFILE '/u01/oradata/test/system01.dbf' SIZE 100M AUTOEXTEND ON NEXT 640K
logfile '/u05/oradata/test/redo01.log' SIZE 100M,
'/u05/oradata/test/redo02.log' SIZE 100M,
'/u05/oradata/test/redo03.log' SIZE 100M;
disconnect
spool off
exit
EOF
Hope this helps !

Oracle 8.1.7 installation problem on ( linux) red hat 7.1

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Hi,
My name is Fridirick REMBEAUX and I have the same problem. ;))
I did not understand the first point after :
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
At which url can I get this script ?
I think that maybe it's not the same problem because the installer and so the jre
still executed but nothing else appears.
And I'm also lost. When did the oracle products work well ??
I think I damned.
Hi
I get same Problem on Rh7.3 !But when i execute 2 Step will be OK!
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
2. export LD_ASSUME_KENERL=2.2.5
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

ORACLE 8.1.7 INSTALLATION PROBLEM ON LINUX (URGENT)

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Try setting the LD_ASSUME_KERNEL=2.2.5 environment variable before you run the installer.
I needed to do this to get the 8.1.7 installer running on RedHat 7.1 and 7.2.
Scott
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Oracle installation problem on linux

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Try setting the LD_ASSUME_KERNEL=2.2.5 environment variable before you run the installer.
I needed to do this to get the 8.1.7 installer running on RedHat 7.1 and 7.2.
Scott
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Error while apply oracle patch 10.2.0.4

hi..
i am applying oracle patch 10.2.0.4 on my Production system , it generating error
E:\oracle\R3D\102\OPatch>opatch apply
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : e:\oracle\R3D\102
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : e:\oracle\R3D\102\oui
Log file location : e:\oracle\R3D\102\cfgtoollogs\opatch\opatch-2009_Apr_29_13-3
5-37-PKT_Wed.log
ApplySession applying interim patch '7715057' to OH 'e:\oracle\R3D\102'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: R
equired component(s) [ oracle.rdbms.rsf, 10.2.0.4.0 ] not present in the Oracle
Home or a higher version found.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 73
plz guide me , how can i resolve that issue
Regards
Imran

Hi,
why people do not read even the web sites
to download the patches you fo to the page
http://service.sap.com/oracle-download
there it says:
ORACLE
General Information
This area in the SAP Support Portal is designed to download Oracle patchsets, patches, scripts etc. Information on how to download Oracle patches can be found in SAP Note 509314.
The answer to your question is on the mentioned note "[509314|http://service.sap.com/sap/support/notes/509314]"

Tuxedo 8.0 and Oracle patch 9.2.0.8

Hi,
We have installed Oracle patch 9.2.0.8 into UNIX machine. We are using Tuxedo for middleware that using an API Application through Tuxedo to provision onto Oracle database.
Since Oracle patch 9.2.0.8 installed, Tuxedo produced core file.
It has been mentioned by Oracle Metalink Doc ID 455832.1 that potentially because both server and client have to be in synch version. The Oracle patch has been installed on UNIX server for both
My question is that:
- Is there any Oracle client on Tuxedo (8.0) patch that need to be installed ?
- Or should we upgrade Tuxedo to later version, if yes which version that in synch with Oracle patch 9.2.0.8 ?
At the moment no workarround is applied.
Thank in advance for any info and help.
--Age

Hi Todd,
Thank you for your usefull answer. I will take this point with our application's vendor.
Do you know if we would like to upgrade to a higher version or best to the latest 10gR3, is there any contact Support that we can contact to get software kit (weblink for download etc.). I am not sure the license contract agreement of our company, in parallel I would like to know the procedure from your side (Oracle Tuxedo).
Regards,
--Age

How to find / get the list of oracle patches applied using SAPGUI

At OS Level as ora<SID> user from directory /usr/sap/<SID>/102_64/OPatch/opatch inventory command gives the output of applied oracle patches. How to find out form SAPGUI login the same information.
Thaanx in advance.
PR

Hi ,
You can execute few commands from SAP level, suppose for example if you don't have access to Operating system.But it will be executed under sidadm user.Opatch utility will executed under orasid user ( concerns if you have Unix flavour ) .
I have used this and it gives the result.
in SAP level ,
SE38 -
>program name RSBDCOS0 -
> execute -
>/oracle/<SID>/920_64/OPatch/opatch lsinventory
[1]/oracle/CWR/920_64/OPatch/opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home           : /oracle/CWR/920_64
Oracle Home Inventory : /oracle/CWR/920_64/inventory
Central Inventory     : /oracle/CWR/oraInventory
   from               : /etc/oraInst.loc
OUI location          : /oracle/CWR/920_64/oui
OUI shared library    : /oracle/CWR/920_64/oui/lib/aix/liboraInstaller.so
Java location         : /oracle/CWR/920_64/jdk/jre/bin/java
Log file location     : /oracle/CWR/920_64/.patch_storage/<patch ID>/*.log
Creating log file "/oracle/CWR/920_64/.patch_storage/LsInventory__06-12-2008_12-33-47.log"
Result:
Installed Patch List:
=====================
1) Patch 6000096 applied on Thu Dec 20 14:19:51 CET 2007
      [ Base Bug(s): 5172444 3521347 3639130 5140931 4541524 4483286 5129407 5977665 5562159 ]
2) Patch 5530958 applied on Thu Dec 20 14:19:09 CET 2007
      [ Base Bug(s): 5530958 ]
3) Patch 5496862 applied on Thu Dec 20 14:18:10 CET 2007
      [ Base Bug(s): 5496862 ]
4) Patch 5369855 applied on Thu Dec 20 14:15:20 CET 2007
      [ Base Bug(s): 5369855 ]
5) Patch 4660718 applied on Thu Dec 20 14:14:26 CET 2007
      [ Base Bug(s): 4660718 ]
6) Patch 5901875 applied on Thu Dec 20 14:12:27 CET 2007
      [ Base Bug(s): 5901910 5490859 2701372 5901875 5491035 ]
OPatch succeeded.
if you need , you can change the directory using change directory option.

Silent Install of Oracle Patch 10.1.0.2.0

I'm trying to do a silent installation of the 9.2.0.5_PATCH_SET_FOR_ORACLE_DATABASE_SERVER. I want to install the Oracle 10.1.0.2.0 patch first. Below is my response file. When I try to run the installation silently the Language Selector appears. What am I missing here?
Any Help is appreciated.
## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
RESPONSEFILE_VERSION=2.2.1.0.0
#Name : UNIX_GROUP_NAME
#Datatype : String
#Description: Unix group to be set for the inventory directory. Valid only in Unix platforms.
#Example: UNIX_GROUP_NAME = "install"
UNIX_GROUP_NAME=" "
#Name : FROM_LOCATION
#Datatype : String
#Description: Complete path to the products.xml.
#Example: FROM_LOCATION = "..\stage\products.xml"
FROM_LOCATION="Y:\Software\Oracle_9i_Patches\9.2.0.5_PATCH_SET_FOR_ORACLE_DATABASE_SERVER\Disk1\stage\products.xml"
#Name : FROM_LOCATION_CD_LABEL
#Datatype : String
#Description: This variable should only be used in multi-CD installations. It includes the label of the compact disk where the file "products.xml" exists. The label can be found in the file "disk.label" in the same directory as products.xml.
#Example: FROM_LOCATION_CD_LABEL = "CD Label"
FROM_LOCATION_CD_LABEL=<Value Unspecified>
#Name : ORACLE_HOME
#Datatype : String
#Description: Complete path of the Oracle Home.
#Example: ORACLE_HOME = "C:\OHOME1"
ORACLE_HOME="C:\Oracle\Ora92"
#Name : ORACLE_HOME_NAME
#Datatype : String
#Description: Oracle Home Name. Used in creating folders and services.
#Example: ORACLE_HOME_NAME = "OHOME1"
ORACLE_HOME_NAME="OraHome92"
#Name : TOPLEVEL_COMPONENT
#Datatype : StringList
#Description: The top level component to be installed in the current session.
#Example: TOPLEVEL_COMPONENT = {"oracle.swd.oui","10.1.0.2.0"}
TOPLEVEL_COMPONENT={"oracle.swd.oui","10.1.0.2.0"}
#Name : SHOW_SPLASH_SCREEN
#Datatype : Boolean
#Description: Set to true if the initial splash screen in OUI needs to be shown.
#Example: SHOW_SPLASH_SCREEN = true
SHOW_SPLASH_SCREEN=true
#Name : SHOW_WELCOME_PAGE
#Datatype : Boolean
#Description: Set to true if the Welcome page in OUI needs to be shown.
#Example: SHOW_WELCOME_PAGE = false
SHOW_WELCOME_PAGE=false
#Name : SHOW_CUSTOM_TREE_PAGE
#Datatype : Boolean
#Description: Set to true if the custom tree page in OUI needs to be shown.
#Use this page to select or de-select dependencies. This page appears only in a custom install type.
#Example: SHOW_CUSTOM_TREE_PAGE = false
SHOW_CUSTOM_TREE_PAGE=false
#Name : SHOW_COMPONENT_LOCATIONS_PAGE
#Datatype : Boolean
#Description: Set to true if the component locations page in OUI needs to be shown.
#This page only appears if there are products whose installed directory can be changed.
#If you set this to false you will prevent the user from being able to specify alternate directories.
#Example: SHOW_COMPONENT_LOCATIONS_PAGE = false
SHOW_COMPONENT_LOCATIONS_PAGE=false
#Name : SHOW_SUMMARY_PAGE
#Datatype : Boolean
#Description: Set to true if the summary page in OUI needs to be shown.
#The summary page shows the list of components that will be installed in this session.
#Example: SHOW_SUMMARY_PAGE = true
SHOW_SUMMARY_PAGE=false
#Name : SHOW_INSTALL_PROGRESS_PAGE
#Datatype : Boolean
#Description: Set to true if the install progress page in OUI needs to be shown.
#This page shows the current status in the installation. The current status includes the product being installed and the file being copied.
#Example: SHOW_INSTALL_PROGRESS_PAGE = true
SHOW_INSTALL_PROGRESS_PAGE=false
#Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
#Datatype : Boolean
#Description: Set to true if the required config assistants page in OUI needs to be shown.
#This page shows the list of required configuration assistants that are part of this installation.
#It shows the status of each assistant, including any failures with detailed information on why it failed.
#Example: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
#Name : SHOW_CONFIG_TOOL_PAGE
#Datatype : Boolean
#Description: Set to true if the config assistants page in OUI needs to be shown.
#This page shows the list of configuration assistants that are part of this installation and are configured to launch automatically.
#It shows the status of each assistant, including any failures with detailed information on why it failed.
#Example: SHOW_CONFIG_TOOL_PAGE = true
SHOW_CONFIG_TOOL_PAGE=false
#Name : SHOW_RELEASE_NOTES
#Datatype : Boolean
#Description: Set to true if the release notes of this installation need to be shown at the end of installation.
#This dialog is launchable from the End of Installation page and shows the list of release notes available for the products just installed.
# This also requires the variable SHOW_END_SESSION_PAGE variable to be set to true.
#Example: SHOW_RELEASE_NOTES = true
SHOW_RELEASE_NOTES=false
#Name : SHOW_ROOTSH_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the Confirmation dialog asking to run the root.sh script in OUI needs to be shown.
#Valid only for Unix platforms.
#Example: SHOW_ROOTSH_CONFIRMATION = true
SHOW_ROOTSH_CONFIRMATION=false
#Name : SHOW_END_SESSION_PAGE
#Datatype : Boolean
#Description: Set to true if the end of session page in OUI needs to be shown.
#This page shows if the installation is successful or not.
#Example: SHOW_END_SESSION_PAGE = true
SHOW_END_SESSION_PAGE=false
#Name : SHOW_EXIT_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the confirmation when exiting OUI needs to be shown.
#Example: SHOW_EXIT_CONFIRMATION = true
SHOW_EXIT_CONFIRMATION=false
#Name : NEXT_SESSION
#Datatype : Boolean
#Description: Set to true to allow users to go back to the File Locations page for another installation. This flag also needs to be set to true in order to process another response file (see NEXT_SESSION_RESPONSE).
#Example: NEXT_SESSION = true
NEXT_SESSION=false
#Name : NEXT_SESSION_ON_FAIL
#Datatype : Boolean
#Description: Set to true to allow users to invoke another session even if current install session has failed. This flag is only relevant if NEXT_SESSION is set to true.
#Example: NEXT_SESSION_ON_FAIL = true
NEXT_SESSION_ON_FAIL=false
#Name : NEXT_SESSION_RESPONSE
#Datatype : String
#Description: Optionally specifies the full path of the next session's response file. If only a file name is specified, the response file is retrieved from the <TEMP>/oraInstall directory. This variable is only active if NEXT_SESSION is set to true.
#Example: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
NEXT_SESSION_RESPONSE=<Value Unspecified>
#Name : DEINSTALL_LIST
#Datatype : StringList
#Description: List of components to be deinstalled during a deinstall session.
#Example: DEINSTALL_LIST = {"oracle.swd.oui","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.swd.oui","10.1.0.2.0"}
#Name : SHOW_DEINSTALL_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if deinstall confimation is needed during a deinstall session.
#Example: SHOW_DEINSTALL_CONFIRMATION = true
SHOW_DEINSTALL_CONFIRMATION=true
#Name : SHOW_DEINSTALL_PROGRESS
#Datatype : Boolean
#Description: Set to true if deinstall progress is needed during a deinstall session.
#Example: SHOW_DEINSTALL_PROGRESS = true
SHOW_DEINSTALL_PROGRESS=true
#Name : ACCEPT_LICENSE_AGREEMENT
#Datatype : Boolean
#Description: By setting this variable to true, you are accepting the license agreement. This variable is used only for silent installations.
#Example: ACCEPT_LICENSE_AGREEMENT = true
ACCEPT_LICENSE_AGREEMENT=false
#Name : SELECTED_LANGUAGES
#Datatype : StringList
#Description: Languages in which the components will be installed.
#Component : oracle.swd.oui
SELECTED_LANGUAGES={"en"}
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#Component : oracle.swd.oui
INSTALL_TYPE="Custom"
#Name : PROD_HOME
#Datatype : String
#Component : oracle.apache.isqlplus
oracle.apache.isqlplus:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.context
oracle.cartridges.context:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.locator
oracle.cartridges.locator:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.jdbc_dev
oracle.java.jdbc.jdbc_dev:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.oci_common
oracle.java.jdbc.oci_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.ano.sns
oracle.options.ano.sns:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.ano.ssl.owm
oracle.options.ano.ssl.owm:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imcom
oracle.options.intermedia.imcom:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.jai
oracle.options.intermedia.jai:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.olap
oracle.options.olap:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.olap.cwmlite
oracle.options.olap.cwmlite:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.ops
oracle.options.ops:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.ott
oracle.p2k.ott:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.precomp_common
oracle.p2k.precomp_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.proc
oracle.p2k.proc:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.procob
oracle.p2k.procob:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.procob18
oracle.p2k.procob18:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.aqapi
oracle.rdbms.aqapi:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.expimp
oracle.rdbms.expimp:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.hs_common
oracle.rdbms.hs_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.hs_odbc
oracle.rdbms.hs_odbc:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.lbac
oracle.rdbms.lbac:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.mig
oracle.rdbms.mig:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.nid
oracle.rdbms.nid:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.occi
oracle.rdbms.occi:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.otrace
oracle.rdbms.otrace:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.plsql
oracle.rdbms.plsql:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.rman
oracle.rdbms.rman:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.sqlldr
oracle.rdbms.sqlldr:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.sqlplus
oracle.rdbms.sqlplus:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.agent_rsf
oracle.rsf.agent_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.clntsh_rsf
oracle.rsf.clntsh_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.ldap_rsf
oracle.rsf.ldap_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.net_rsf
oracle.rsf.net_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.nlsrtl_rsf
oracle.rsf.nlsrtl_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.oracore_rsf
oracle.rsf.oracore_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.otrace_rsf
oracle.rsf.otrace_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.precomp_rsf
oracle.rsf.precomp_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.ssl_rsf
oracle.rsf.ssl_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.xdk_rsf
oracle.rsf.xdk_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.tg4sybs
oracle.tg.tg4sybs:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.tg4tera
oracle.tg.tg4tera:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.utilities.util
oracle.utilities.util:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.parser.java
oracle.xml.parser.java:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.xml_ncomp
oracle.xml.xml_ncomp:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.oid.client
oracle.oid.client:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.common_schema
oracle.rdbms.common_schema:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.netsrv
oracle.networking.netsrv:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.oid.server
oracle.oid.server:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.dbv
oracle.rdbms.dbv:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.cman
oracle.networking.cman:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.names
oracle.networking.names:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.ano.dce
oracle.options.ano.dce:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.utilities.util_common
oracle.utilities.util_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.netclt
oracle.networking.netclt:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.olap.api
oracle.options.olap.api:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.partitioning
oracle.options.partitioning:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.netmgr
oracle.networking.netmgr:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.plsql_rsf
oracle.rsf.plsql_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.ano.ssl
oracle.options.ano.ssl:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.demo
oracle.rdbms.demo:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.xml.xsu
oracle.rdbms.xml.xsu:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.sqlj.sqljruntime
oracle.java.sqlj.sqljruntime:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.xml
oracle.rdbms.xml:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.thin12
oracle.java.jdbc.thin12:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.spatial
oracle.cartridges.spatial:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.isearch.is_common
oracle.isearch.is_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.isearch.client
oracle.isearch.client:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.dbjava_rsf
oracle.rsf.dbjava_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.javavm.javatools
oracle.java.javavm.javatools:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.thin14
oracle.java.jdbc.thin14:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.isearch.server
oracle.isearch.server:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.oci
oracle.rdbms.oci:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.p2k.xmldevkit
oracle.p2k.xmldevkit:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imclient.imclisamples
oracle.options.intermedia.imclient.imclisamples:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.parser.cplus
oracle.xml.parser.cplus:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.parser.c
oracle.xml.parser.c:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.parser.plsql
oracle.xml.parser.plsql:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.assistants.acf
oracle.assistants.acf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.oid.client_common
oracle.oid.client_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.thin11
oracle.java.jdbc.thin11:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.oid.oidca
oracle.oid.oidca:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.sqlj
oracle.java.sqlj:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.oid.tools
oracle.oid.tools:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.networking.netca
oracle.networking.netca:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.xsql
oracle.xml.xsql:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.hs_olefs
oracle.rdbms.hs_olefs:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.hs_olesql
oracle.rdbms.hs_olesql:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.tg4msql
oracle.tg.tg4msql:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.agent_ext.oapps_agentext
oracle.emprod.agent_ext.oapps_agentext:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.agent_ext.emd_agentext
oracle.emprod.agent_ext.emd_agentext:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.agent_ext.oecm_agentext
oracle.emprod.agent_ext.oecm_agentext:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.ordcom
oracle.cartridges.ordcom:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.agent_ext.sqlsrv_agentext
oracle.emprod.agent_ext.sqlsrv_agentext:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.ordaudio
oracle.cartridges.ordaudio:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.ordimg
oracle.cartridges.ordimg:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.cartridges.ordsmv
oracle.cartridges.ordsmv:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.classgen.cplus
oracle.xml.classgen.cplus:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.classgen.java
oracle.xml.classgen.java:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.transx
oracle.xml.transx:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.xml.transview
oracle.xml.transview:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.advrep
oracle.rdbms.advrep:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.csmig
oracle.rdbms.csmig:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.pg4appc
oracle.tg.pg4appc:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.pg4mq
oracle.tg.pg4mq:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.tg.tg4drda
oracle.tg.tg4drda:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.jdbc.jdbc_common
oracle.java.jdbc.jdbc_common:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.hs_oledb
oracle.rdbms.hs_oledb:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.oemagent.agentca
oracle.emprod.oemagent.agentca:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imclient.imclijava
oracle.options.intermedia.imclient.imclijava:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imclient.imclijmf
oracle.options.intermedia.imclient.imclijmf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imclient.imcliweb
oracle.options.intermedia.imclient.imcliweb:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.rdbms_rsf
oracle.rsf.rdbms_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.agent_ext.ows_agentext
oracle.emprod.agent_ext.ows_agentext:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.intermedia.imclient.imclicompat
oracle.options.intermedia.imclient.imclicompat:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.javavm
oracle.java.javavm:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.java.j2ee.core
oracle.java.j2ee.core:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.emprod.oemagent.base_oemagent
oracle.emprod.oemagent.base_oemagent:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.options.odm
oracle.options.odm:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.doc_rsf
oracle.rsf.doc_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms.dbscripts
oracle.rdbms.dbscripts:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rsf.platform_rsf
oracle.rsf.platform_rsf:PROD_HOME=<Value Unspecified>
#Name : PROD_HOME
#Datatype : String
#Component : oracle.rdbms
oracle.rdbms:PROD_HOME=<Value Unspecified>
#Name : varMQM
#Datatype : Number
#Description: dialogLocation return value
#Component : oracle.tg.pg4mq
varMQM=<Value Unspecified>
#Name : varDRDANETSEL
#Datatype : Number
#Description: Network Product Selection index for Dialog
#Component : oracle.tg.tg4drda
varDRDANETSEL=<Value Unspecified>

I figured out the solution so I thought I would post it. Basically I didn't have the "- silent" piece included. Once I included it the patch ran in silent mode.
Y:\Software\Oracle_9i_Patches\9.2.0.5_PATCH_SET_FOR_ORACLE_DATABASE_SERVER\Disk1\install\setup.exe -silent -responseFile Y:\Software\Oracle_9i_Patches\9.2.0.5_PATCH_SET_FOR_ORACLE_DATABASE_SERVER\Disk1\patchset.rsp

Upgrading Oracle Patch Set

Hello All,
I am in the process of upgrading the Oracle Patch set from 9.2.0.6 to 9.2.0.8.
Can anyone let me know what are the Pre and post installation steps that needs to taken care of.
Thanks

As Anurag has already mentioned that with every patch set there is a readme file which contains all pre and post installation steps in detail. Please read each word of it and you done if you follow as it is. In case you found any error/issue you can paste the steps which you have done; so that we can found where was the error / mis-steped.
Regards
Girish Sharma

System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8

Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors         SYSTEM_CORE_DUMPED
Date and Time          14.04.2008 09:26:17
ShrtText
     Process terminated by signal 11.
What happened?
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
    processor discovered an invalid system state.
What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
Error analysis
    An SAP System process was terminated by an operating system signal.
    Possible reasons for this are:
    1. Internal SAP System error.
    2. Process was terminated externally (by the system administrator).
               Last error logged in SAP kernel
    Component............ "Taskhandler"
    Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
    Version.............. 1
    Error code........... 11
    Error text........... "ThSigHandler: signal"
    Description.......... " "
    System call.......... " "
    Module............... "thxxhead.c"
    Line................. 9780
How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.
    Save this file under another name.
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PM

No. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus

Oracle Patch 11.1.0.6 -- 11.1.0.7 installer problems on linux

Similar Messages

Maybe you are looking for