Oracle patch in windows...

Hi experts,
i am using oracle 11g(releasae 2)
when i run the oracle opatch utility by the following command...i get the error...
SQL> $opatch lsinventory -detail
'opatch' is not recognized as an internal or external command,
operable program or batch file.
please tell me what settings i need to do before running this command so that i could check installed patches and apply new patches.......
Thanks ad regards,
MDBA

Run from the OS prompt.
set the ORACLE_HOME
cd $ORACLE_HOME/OPATCH
opatch lsinventory

Similar Messages

How to install Oracle patch in windows

Hi,
I have installed oracle service registry and was facing below error:-
org.idoox.wasp.WaspInternalException: java.lang.RuntimeException: Updates to config files not supported
After searching on Oracle Support, i come to know that patch p9499508 is required for this bug. I have downloaded the patch from oracle.
Now i don't know how to install/use this patch . I'm using windows and installed everything on my local machine.
Does anyone have idea on it??
Thanks,
Vinit

Thanks Mathieu. I have checked 'Readme' file and followed instructions mentioned.
But don't understand how to follow below mentioned by you:-
Set the oracle_home where the patch will be installed.
Use the "lsinventory" argument of opatch
Use the "apply" argument of opatch

Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

Hello!
Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
*************installActions2010-08-06_11-02-02PM.log******************
Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The number of files bootstrapped for the jre is 551.
The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
INFO:      CLASSPATH =
INFO: Username:Administrator
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 10.2.0.4.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.patchset.db_Custom
INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
INFO: Checking checkToInstallCCR
     This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
INFO: oracle.ons Product Location: Empty path specified.
INFO: oracle.sysman.repository.db Product Location: Empty path specified.
INFO:
*** Language Selection Page***
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
INFO: *** Entering Component: oracle.ons installation
INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
INFO: User Selected: Yes/OK
*************installActions2010-08-06_11-02-02PM.log******************
**************oraInstall2010-08-06_11-02-02PM.err***********************
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
     at getOSName.performQuery(getOSName.java:16)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
     at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
**************oraInstall2010-08-06_11-02-02PM.err***********************
***************oraInstall2010-08-06_11-02-02PM.out**************************
**************oraInstall2010-08-06_11-02-02PM.out*************************

A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
HTH
Srini

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

Can somebody helpme apply Oracle Olap 9.2.0.1.0.a patch for Windows

Everything on the system is a fresh installation.
1.Oracle 9iR2 Database, I chose the data warehousing option.
After installation I checked to make sure that everything could be started.
2. I then proceeded to install the Oracle OLAP patch 9.2.0.1.0a patch for windows.After navigating to the 2499827 directory.
I typed OPatch\opatch apply as stated.
It started then said "Peforming Pre patch installation checks"
At the end of this
I recieved a message saying
"The following required components were not located or have the wrong versions
oracle.options.olap"
I guess it was to right to assume that the patch process failed, particularly as don't see any olap\admin directory in my %ORACLE_HOME%. The olap directory is there.
Can somebody please give me some pointers. Is there something I have missed with regards to setting up Oracle 9iR2 thats preventing me from patching it.
Thank you
Richard Smith

If you are missing the admin directory under your olap directory your initial Oracle9i Database Release 2 installation appears to be the culprit. Again, be sure to install the Enterprise Edition with the Data Warehouse database configuration. Also, make sure your Global Database Name and SID are all set up and running fine. Perhaps you installed over a previous ORACLE_HOME? Be sure to follow these steps for a proper Oracle removal:
1. Terminate the Oracle9i Database and its processes
Go to the Services applet in Control Panel and Stop all running Oracle processes
2. Run OUI to uninstall your previous version of Oracle9i with OLAP Option, then Exit
Choose 'Deinstall Products...'
Select the products you need to remove, then click 'Remove...'
Then click 'Exit' when done
3. For a clean installation remove the following directories and registry entries (if they still exist):
Directories:
<your_drive>:\oracle\ora92
<your_drive>:\oracle\oradata
<your_drive>:\oracle\admin
<your_drive>:\Program Files\Oracle
Registry Entries:
[HKEY_CURRENT_USER\Software\ORACLE]
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92Agent]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92ClientCache]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92HTTPServer]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92PagingServer]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92SNMPPeerEncapsulator]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92SNMPPeerMasterAgent]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOraHome92TNSListener]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleServiceMY_SID]

Creating a database on Personal Oracle 9i on Windows 2000

Hi,
Well, I cannot create database on Personal Oracle 9i on Windows 2000 via Database Configuration Assistant. Same problem occurs during installation. Here is the message:
CreateProcess: null -new -sid DES -startmode m error=2
Does anyone know anything about it?
Please reply...
Thank you...

Apply the lastest patch to the OS and try.
Joel Perez

Install Oracle 9i on Windows Vista Home Premium

I have a problem Installing Oracle 9i on Windows Vista Home Premium, I cant install it because it throws me an error message saying that is incompatible with my version of Windows. It is possible to install it with some patch or something??
Message was edited by:
user599646

The only patch I know of is called Windows XP.
In case you have not done any internet searches on this, even Oracle Database 10g was not compatible with Vista until Oracle applied some heavy patches and re-released it.
And since Oracle9i is officially deprecated (nearest thing to obsolete as to make no difference) I see no reason for Oracle to backport the patches.

Oracle 10g on Windows 2003: instance not autostarting

I'm installing Oracle 10g (10.2.0.1) on two new Windows 2003 servers, and I'm facing the same problem, even after some full re-installations, on both of them; so this issue seems to be some kind of bug related to Oracle 10g on Windows 2003 and not just some random error.
When I run the installation it completes fine, and the database instance gets created and started without any trouble; I can connect to it using the console, the Java stand-alone Enterprise Manager, SQL Plus or anything else; it works when connecting from clients, too.
As soon as the server is rebooted, Oracle services start but it just seems the instance isn't actually started: any connection is refused by the listener which complains about not knowing the supplied instance name, and the oracle.exe process only uses about 11 MB of memory, which is a sure sign it isn't doing anything useful. The instance is configured to start, the registry keys are properly set, and everything works correclty after the installation... but stops working after the first server reboot.
I tried manually stopping and starting the services, in various orders; I tried re-installing Oracle various times; I tried deleting and re-creating the database instance, both at setup time or manually after the setup was done without creating an instance, I tried anything I could think of.
The only thing I didn't try was applying patch set 10.2.0.3 to the installation, but I just can't seem to find them, even though my company has an Oracle partnership; I find Metalink just a bit too confusing.
Can someone please help?
P.S.
The servers are actually VMWare ESX virtual servers, but I just can't imagine this to be the cause of the problem. The operating system on both servers is Windows Server 2003 Enterprise Edition (not R2), italian language, with service pack 2 and all the latest updates from Windows Update. The servers are not domain members and I'm running the installation using the local Administrator account.

I don't have a physical server available now, but I really can't even imagine how the underlying hardware, be it physical or virtual, could affect this behaviour. I'm talking about the Oracle service starting while the instance isn't, this is very unlikely to have any relationship with device drivers.

How to Install Oracle 10g in Windows 7 Home premium 64bit operating system

Hi,
I am using Windows 7 Home premium 64bit operating system. While i was installing oracle 10g i got error and not able to install. How to install the Oracle 10g databse on this operating system. Is there any patch to install this or i have to use other version of oracle with window 7 operating system?
Thanks in advance
Mayank Adhikari

The argument would be who wants to install Oracle database on Windows 7. I think most probably by the developers who wants to "Try" something prior deal with a production database, right?
For a developer, installing database using the hack is more than NOT having a local database running from the local system. I installed all the products mentioned with windows7bugs post and used the following tools to successfully connect and retrive data from the database instances.
Toad 9.7.x.x
SQL Developer
SQL/Plus
Developer 6i (Another hack, please check this link http://windows7bugs.wordpress.com/2010/03/01/installing-oracle-developer-forms-reports-6i-on-windows-7-64bit/).
I think the discussion about whether all the features of client/server are still available with such a hacked installation is meaningless as far the information requested was strictly for Windows 7, not for a Server OS.
regards,

Oracle installtion on Windows 7 Professional

Hi all,
I just want to install oracle 10g on Windows 7 professional. But i am getting error during OUI installation after clickng on next on first screen there is a pop up message of unknown error
can anyone help me out

Pl post exact version of "10g" and whether Win 7 is 32-bit or 64-bit, along with the complete message from the install log file - the only certified version of "10g" on Win 7 is 10.2.0.5, and the install instructions are here -
32-bit - http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
64-bit - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
Applying the 10.2.0.5 patch set is mandatory - this assumes you have access to the patch on My Oracle Support. If you do not, then you will need to install 11gR2.
HTH
Srini

External table in Oracle 10g and Windows server 2003 problem

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
This obviously effects mappings, deployments, etc.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Thank you for your reply.
Your proposal is the standard solution. As a matter of fact, that's how it is on my "old" system. Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Oracle 8 in windows 2003

Hai All,
Oracle 8 support windows 2003 ? any patches needed?
please help..
Shiju

Oracle 8 hit the market when Windows 2003 didn't event exist.
Consequently Oracle 8 is not certified on Windows 2003 (so is not guaranteed to work) and as it is both not certified and desupported Oracle won't help you out.
Consequently you are on your own, when you continue your road to hell.
Sybrand Bakker
Senior Oracle DBA

External table in Oracle 10g and Windows server 2003

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Version 9.2.04.
Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
2.I have followed the steps too as described here in these two forum links:
1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
3.I am giving my installtion steps..
I have installed JDK: 1.7.0.
I have succesfully installed web logic version wls1035_generic.jar.
I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
I have also installed patch version 11.1.1.3.0.
But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
I have also checked the path ..It doesnt contains any special characters.
Any ideas???

Hi John,
As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
1). Installed JDK 1.6u29
2). Installed WebLogic 10.3.3
3). Installed FMW 11.1.1.2
4). Installed FMW 11.1.1.3 Patch
Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
Deepak Jha

Upgrade Oracle patch from 10.2.0.2 to 10.2.0.4 but 3 Instance on 1 server .

Dear all ,
AIX , Oracle , ECC6.0 and SAP Netweaver 7.0 .
we have 3 instances are Installed on same server .
SAP DEV , SAP QA , BIW-DEV .
Seperate Oracle home and SID .
I required to apply Oracle patch to all 3 Instance .
I have already Upgraded Oracle patch from 10.2.0.2 to 10.2.0.4 in my Sand Box server (Windows) .
Kindl y suggest how to upgrade Oracle patch to all the Instance .
or i have to upgrade oracle patch to one by one instance .
Is there any precaution ...
Regards

Dear Mitra,
Yesterday i have tried to upgrade Oracle patch on DEV server , i got error ,
Pls check the below ,
SAPDEVQA:oraird 7> ls -l
total 3592
-rwxrwxrwx    1 oraird   dba         1626654 Aug 01 18:07 10204_buglist.htm
drwxrwxrwx    4 oraird   dba            4096 Aug 01 18:07 install
-rwxrwxrwx    1 oraird   dba          195843 Aug 01 18:07 patch_note.htm
drwxrwxrwx    2 oraird   dba             256 Aug 01 18:07 response
-rwxrwxrwx    1 oraird   dba            3495 Aug 01 18:07 runInstaller
drwxrwxrwx   12 oraird   dba            4096 Aug 01 18:25 stage
SAPDEVQA:oraird 8> ./runInstaller
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should execute '/usr/sbin/slibclean' on all the nodes before
you proceed with Patchset Installation.
Answer 'y' if root has run '/usr/sbin/slibclean' so you can proceed with Oracle
Patchset installation.
Answer 'n' to abort installation and then ask root to run '/usr/sbin/slibclean'.
Has '/usr/sbin/slibclean' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200, 5300 or 6100
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-08-18_11-42-54AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                      % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:         $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
        echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
        echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
        % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
SAPDEVQA:oraird 9>
Dear Mitra ,
I can resolve the xclock issue ... no problem ..........
but my doubt was Ora log was storing tmp directory ....... Kindly advise .......
Regards
Sathies

Oracle patch in windows...

Similar Messages

Maybe you are looking for