Oracle patch set information

Hi,
We have oracle 10.1 ,10.2 in some systems and we need to update oracle patch set
could anyone help me whether if I want to change oracle 10.1 to 10.2 will come under upgrade or updating patch set?
if yes what is the procedure about how to update patch in Oracle?

Hi,
to go from 10.1 to 10.2 you need to upgrade your database, a patch set will not do it.
Please check the upgrade documentation in the SAP Marketplace:
http://service.sap.com/instguides.
Other thing would be that you want to go from 10.2.0.1 to 10.2.0.2
In this case, you only need to apply the patch set relevant for your Operating system. In this case, follow the note mentioned by Kaushal

Similar Messages

Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

Upgrading Oracle Patch Set

Hello All,
I am in the process of upgrading the Oracle Patch set from 9.2.0.6 to 9.2.0.8.
Can anyone let me know what are the Pre and post installation steps that needs to taken care of.
Thanks

As Anurag has already mentioned that with every patch set there is a readme file which contains all pre and post installation steps in detail. Please read each word of it and you done if you follow as it is. In case you found any error/issue you can paste the steps which you have done; so that we can found where was the error / mis-steped.
Regards
Girish Sharma

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

Oracle patch set 10.1.0.4 or patch #3895738

I need to apply either Oracle patch set 10.1.0.4 or patch #3895738 (on top of 10.1.0.3) for Sun Solaris as suggested by Metalink Note: 283107.1
I cannot find either one by using Metalink Patches search. Where can I find them?

Hi
There is no 10.1.0.4 till now, it's in planed status.
lajos

Error while installing oracle patch set 10.2.0.4

Hi Gurus,
I am installed oracle 10G successfully but while installing oracle patch set 10.2.0.4. it is given the following error.
OUI.exe has encountered a problem and needs to close.
We are sorry for the convenience.
i am installing ECC6.0 on window xp SP3 platform.
Please give me solution ASAP.
Regards
Hemant Gade
Basis Consultant

Hi,
I have solved this issue my self.
It was purely windows registry error.
thanks for your help.
Regards
Hemant

Distinction among terms: Oracle Patch Set, Oracle Patch Bundle, ecc

Hi to all,
a customer asked me to update an Oracle database 10.1.3.0 on Windows 32 platform. THe only patches installed are **5556081** and *5557962*..
I looked for new updated patches and I founded some Oracle Recommended Patches ID 756671.1 and Oracle Patch Bundles ID 1207176.1 for 10.2.3.0.
Honestly I don't know how to proceed in the sense that i don't know if it is better to apply these bundle patches or to go directly to Oracle Patch Set 10.2.4.0 or 10.2.5.0 for a better update.
What is the difference between Oracle Patch Bundle and Oracle Patch Set?? and the difference between Oracle patch Set and Oracle Patch Set Update???
Any help will be well appreciated..I need to do this update asap
Thanks in advance
Susy Paparella OCP 10 G DBA

user8837052 wrote:
Hi to all,
a customer asked me to update an Oracle database 10.1.3.0 on Windows 32 platform. THe only patches installed are **5556081** and *5557962*..
I looked for new updated patches and I founded some Oracle Recommended Patches ID 756671.1 and Oracle Patch Bundles ID 1207176.1 for 10.2.3.0.
Honestly I don't know how to proceed in the sense that i don't know if it is better to apply these bundle patches or to go directly to Oracle Patch Set 10.2.4.0 or 10.2.5.0 for a better update.
What is the difference between Oracle Patch Bundle and Oracle Patch Set?? and the difference between Oracle patch Set and Oracle Patch Set Update???
Any help will be well appreciated..I need to do this update asap
Thanks in advance
Susy Paparella OCP 10 G DBA
Pl clarify what you mean by "10.1.3.0", "10.2.3.0", "10.2.4.0" and "10.2.5.0" - there a no such Oracle versions
I believe you mean 10.1.0.3, 10.2.0.3, 10.2.0.4 and 10.2.0.5
If so, all of the above are patch sets on top of the base release (10.1 or 10.2). It is always recommended to update to the latest patch set release.
Pl note that both 10.1 and 10.2 are de-supported - you should be using the latest 11gR2 version.
Patch set updates (PSU) are additional bundled fixes on top of patch sets - see this MOS Doc
Patch Set Updates for Oracle Products [ID 854428.1]
HTH
Srini

Oracle Patch set 10.2.0.4 for HP-UX PA-RISK

Dear all,
Can anyone please tell me the path to download the Oracle Patch ser 10.2.0.4 for HP-UX PA_RISK?
I need to upgrade our DB level - currently Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
For upgrade to Oracle 11g I need to be on minimum 10.2.0.4. I tried to find the patchset files on :
Software downloads ->Database patches -> Oracle ->Oracle 64-bit ->Oracle 10.2.0. 64-bit Here I can't find 10.2.0.4
On the other path Software downloads ->Database patches -> Oracle ->Oracle 10.2.0.4 -> Database RDBMS ->HP-UX PA-RISC (64-bit) I can't find the patch set only bundle patch 10.2.0.4.6
Please help.
Thanks in advance.
BR,
Ruzica

> First we will do SAP systems merge and when there will be only one DB instance we'll do Oracle upgrade to 11g
And why do you think a merge of application data is dependent on the Oracle patchlevel? I mean those patchlevel are on a technical level, even if you'd use SQL on the lower level it works you don't merge "binaries" but database content, right?
http://service.sap.com/swcenter-3pmain
--> Oracle
--> Oracle 10.2.0.4
--> Database RDBMS
--> HP-UX PA-RISC (64-bit)
There you can download the patchset.
BTW: this is also mentioned in "1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4" )
Markus

Oracle patch set

Hi support,
can you please guide... i need to upgrade my oracle patch 10.2.0.4.0 to 10.2.0.4.4 ..
why this new patch set for what purpose?

Hi;
can you please guide... i need to upgrade my oracle patch 10.2.0.4.0 to 10.2.0.4.4 ..
why this new patch set for what purpose?Please check patch's read me part than you can see which bug fixed on that release.
I suggest also check below notes:
Oracle Recommended Patches -- Oracle Database [ID 756671.1]
Quick Reference to Patchset Patch Numbers [ID 753736.1]
Regard
Helios

Problem downloading Patch Set Oracle 10.2.0.5 from SAP Service Market Place

As mentioned in SAP Note 871735:
Oracle patch set 10.2.0.5
To navigate to the DVD download:
1. On the right-hand side under 'Software Download', select the relevant
software variant:
- Oracle 10.2 software (64-bit)
- Oracle 10.2 software (32-bit)
2. Choose 'Installation'.
3. Select your platform.
4. Choose 'Oracle'.
5. Select the relevant ORACLE RDBMS DVDs.
6. Add the DVD to the 'Download Basket'.
However, when I click on the "Oracle 10.2 software (64-bit)", the right-hand side of the page goes blank and just says Oracle on top? In the search, I also can't find the 51040057_4.
Is it due to the SAP Service Marketplace account restrictions or what?
We have our SAP on DB2.

We have our SAP on DB2
This could be the reason as to why you are not able to download Oracle patches.
Regards,
SBK

Expdp has errors after adding patches set?

Hi there,
After adding Oracle patches set and upgrade the database from 10.2.01 to 10.2.0.3, we got the following errors:
UDE-00008: operation generated ORACLE error 31626
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2747
ORA-39086: cannot retrieve job information
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.KUPV$FT_INT", line 1489
ORA-12805: parallel query server died unexpectedly
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3712
ORA-06512: at line 1
Notes: expdp used to work in version 10.2.0.1.
now it has errors above in version 10.2.0.3
What should we do to fix it?
Thanks,

Check this metalink note:
EXPDP CLIENT GETS UDE-00008 ORA-31626 ORA-39086
Doc ID: NOTE:549781.1
Despite of the error stack, expdp may be run successfully.
Werner

Path for Oracle patch from 10.2.0.2 to 10.2.0.4 Installation

Dear all ,
let me know is there any specfic path to install oracle patch set 10.2.0.2 to 10.2.0.4 ,bcoz i have copied the patch set 10.2.0.4 under tmp/patch and i have tried to install oracle patch under tmp/patch path , File system for tmp has gone up , AIX team has informed me do not put any file in tmp. Remove all those files from tmp.
Kindly advise
shall i delete the files under tmp/patch
(Note : Oracle patch upgrade is not done becoz of somw error )

Dear all ,
OraInstall2010-08-07_01-33-53AM
the above mentioned folder has been created during the Oracle patch Upgrade ....
let me know the OraInstall2010-08-07_01-33-53AM is required ?
Note : Upgrade also not done becoz of some error .
shall i delete the above mentioned folder under /tmp/patch.
Kindly suggest and is there any Specific path to copy the p6810189_10204_AIX5L and install for Oracle patch

Installing patch set 10.2.0.5 from 10.2.0.4

Hi,
My current environment is :-
OS/ = Windows 2008 -x64bits
DB=oracle 10g (10.2.0.4)
SAP=Solution Manager 7.0 EHP1
I need to upgrade the oracle patch set from 10.2.0.4 to 10.2.0.5.
The steps that I will take:-
1) Shutdown Solman, Shutdown oracle DB, shutdown listener.
2) Run the patchset installer using OUI.
This should bring me to 10.2.0.5? Is there anything I should watch out ?
Thanks.
CKChai

Hi,
Every Oracle Patchset contains its own README file. Please refer it carefully.
The README File contains all the pre-inplementation actions and Post-Implementation actions, which are required to perform along with the New Oracle PatchSet Application.
You must have to process all the Pre-Implementation actions , then apply the latest available Oracle Patchset using RUNINSTALLER (OUI) and then perform All the required Post-Implementation actions which are mentioned in that README file.
After applying Oracle Patchset, you must apply the latest available SAP Bundle Patches (collection of OPatches) over Oracle Patchset (e.g. on Oracle patchset 10.2.0.5).
During the whole process the ORACE_HOME should have sufficient space.
Regards,
Bhavik G. Shroff

Issue for Oracle Path Set 10.2.0.4.0 installation

Hello
SAP: ECC6 SR3
DB: Oracle 10g
OS: RHEL5_x86_64
I'm facing a issue during Oracle Patch set 10.2.0.4.0 application
- Runinstall start but after 1% installation receive following error message.
INFO: Exception thrown from action: copyGroupFromJar
Exception Name: IOException2
Exception String: Error in writing to file '/oracle/DEV/102_64/jdk/bin/java'. [/oracle/DEV/102_64/jdk/bin/java (Text file busy)]
Exception Severity: 2
Thanks for your support
Regards
Eric

Hi Eric,
Including the other suggestions, rename the file '/oracle/DEV/102_64/jdk/bin/java' to '/oracle/DEV/102_64/jdk/bin/java.1' then restart the installation.
Best regards,
Orkun Gedik

Oracle Patch Applying

Hi Gurus ,
We are now planning to install ECC 6.0 . We sucessfully installed oracle 10g . As per installation guide , it gives we must install oracle patch . But i dont know how to apply the oracle patch set . Kindly tell me the steps for apply the latest oracle patch set .
Regards
Selvan .SP

Hi Hari ,
This is the first time i install Oracle in the new server . Intially i ran the sapserver.cmd file and installed Oracle Installed Sucessfully . In Oracle patch DVD which file i have to run for patch installation . Kindly advice me .
Regards
Selvan .SP

Oracle patch set information

Similar Messages

Maybe you are looking for