Oracle patch upgradation
Hi all,
Our SAP version is 4.7E and Oracle 9.2.0.7.I have recieved one message that Oracle only give support for 9.2.0.7 up to july 31 2007.They have suggested apply the latest patches.But oracle is giving free support for version 9.2.0.7 up to july 31 2008.
1.If we will not apply oracle patches how will it effect the system?
2. We will need to apply those latest patch only before july 31 2007?
Please help on this.
Regards,
nani Prakash.
> Hi all,
> Our SAP version is 4.7E and Oracle
> 9.2.0.7.I have recieved one message that Oracle only
> give support for 9.2.0.7 up to july 31 2007.They
> have suggested apply the latest patches.But oracle
> is giving free support for version 9.2.0.7 up to
> july 31 2008.
The extended support is for version 9.2 (not only 9.2.0.7) for free until 31st of july 2008. The reason why you should go to 9.2.0.8 is because of the fact, that new patches are only developed/released for 9.2.0.8 and no more for 9.2.0.7. So in case you need an urgent correction for a problem in the future you would need to upgrade to 9.2.0.8 first before you can apply that patch.
Check Note 1021844 - Oracle 9.2 Extended Support free until July 31, 2008
Markus
Similar Messages
-
Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors SYSTEM_CORE_DUMPED
Date and Time 14.04.2008 09:26:17
ShrtText
Process terminated by signal 11.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9780
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PMNo. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus -
Oracle patch upgrade after downgrade
We patched Oracle from 11.2.0.2 to 11.2.0.3 successfully. Third party app had issue and blamed it on the patch, so I downgraded back to 11.2.0.2 successfully.
Turns out the problem was not with Oracle, and I want to get back to 11.2.0.3.
For the downgrade, I did (just listing the major steps)
startup downgrade
drop sysman
@catdwgrd
Point ORACLE_HOME / oratab / oraInst to the old, renamed ORACLE_HOME (11.2.0.2)
attachHome
apply patch 11811073 (new catrelod.sql)
Startup upgrade
@catrelod
bounce DB and @utlrep, and everything looks peachy on 11.2.0.2.
My question now is - what is the most painless way to get back to 11.2.0.3 ?
Can I just re-point to the new ORACLE_HOME and run a catupgrd / catrelod out of the 11.2.0.3 dirs ?
Edited by: allgoodnamesaretaken on 31-Jul-2012 13:57Hi;
Just wonder, Dont you get any information your 3th party tool certified or not certified wiht that version? Secondly You already mention you made upgrade wihtout any issue so why you are looking different path:) Journey? :)
Anyway check below note :
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Dear All,
Currently in my one system, I have oracle 10.2.0.1.0. There is some problem with this release. So i want to upgrade this to Oracle 10.2.0.2 or 10.2.0.4. Can u tell me for this upgrade, what files i will require to download from service market place & what will be the procedure to upgrade this. My system is SOLMAN 7.0 sr2 on windows 2003 server.
Thanks & Regards,
Ankit GuptaHi Ankit,
You can do the database upgrade to 10.2.0.4.
The media is available in the following link.
service.sap.com->Downloads->database patches->Oracle->Oracle 10.2.0.4->Database RDBMS-> <OS Platform>
The above link will give you the oracle software for installation.
You read the upgrade guide to get the detail info.
The guide is available in downloads -> Installation and upgrade guides.
Regards,
Siddhartha. -
Dear all ,
let me know is there any specfic path to install oracle patch set 10.2.0.2 to 10.2.0.4 ,bcoz i have copied the patch set 10.2.0.4 under tmp/patch and i have tried to install oracle patch under tmp/patch path , File system for tmp has gone up , AIX team has informed me do not put any file in tmp. Remove all those files from tmp.
Kindly advise
shall i delete the files under tmp/patch
(Note : Oracle patch upgrade is not done becoz of somw error )Dear all ,
OraInstall2010-08-07_01-33-53AM
the above mentioned folder has been created during the Oracle patch Upgrade ....
let me know the OraInstall2010-08-07_01-33-53AM is required ?
Note : Upgrade also not done becoz of some error .
shall i delete the above mentioned folder under /tmp/patch.
Kindly suggest and is there any Specific path to copy the p6810189_10204_AIX5L and install for Oracle patch -
Hello All,
I am in the process of upgrading the Oracle Patch set from 9.2.0.6 to 9.2.0.8.
Can anyone let me know what are the Pre and post installation steps that needs to taken care of.
ThanksAs Anurag has already mentioned that with every patch set there is a readme file which contains all pre and post installation steps in detail. Please read each word of it and you done if you follow as it is. In case you found any error/issue you can paste the steps which you have done; so that we can found where was the error / mis-steped.
Regards
Girish Sharma -
Dear all ,
AIX , Oracle , ECC6.0 and SAP Netweaver 7.0 .
we have 3 instances are Installed on same server .
SAP DEV , SAP QA , BIW-DEV .
Seperate Oracle home and SID .
I required to apply Oracle patch to all 3 Instance .
I have already Upgraded Oracle patch from 10.2.0.2 to 10.2.0.4 in my Sand Box server (Windows) .
Kindl y suggest how to upgrade Oracle patch to all the Instance .
or i have to upgrade oracle patch to one by one instance .
Is there any precaution ...
RegardsDear Mitra,
Yesterday i have tried to upgrade Oracle patch on DEV server , i got error ,
Pls check the below ,
SAPDEVQA:oraird 7> ls -l
total 3592
-rwxrwxrwx 1 oraird dba 1626654 Aug 01 18:07 10204_buglist.htm
drwxrwxrwx 4 oraird dba 4096 Aug 01 18:07 install
-rwxrwxrwx 1 oraird dba 195843 Aug 01 18:07 patch_note.htm
drwxrwxrwx 2 oraird dba 256 Aug 01 18:07 response
-rwxrwxrwx 1 oraird dba 3495 Aug 01 18:07 runInstaller
drwxrwxrwx 12 oraird dba 4096 Aug 01 18:25 stage
SAPDEVQA:oraird 8> ./runInstaller
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should execute '/usr/sbin/slibclean' on all the nodes before
you proceed with Patchset Installation.
Answer 'y' if root has run '/usr/sbin/slibclean' so you can proceed with Oracle
Patchset installation.
Answer 'n' to abort installation and then ask root to run '/usr/sbin/slibclean'.
Has '/usr/sbin/slibclean' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200, 5300 or 6100
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-08-18_11-42-54AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
SAPDEVQA:oraird 9>
Dear Mitra ,
I can resolve the xclock issue ... no problem ..........
but my doubt was Ora log was storing tmp directory ....... Kindly advise .......
Regards
Sathies -
Presently we have Oracle Database Release 10.2.0.2.0 and Instant Client is instantclient_10202.
We would like to upgrade Oracle Patch 10.2.0.4.0 and Instant Client instantclient_10204_V1.
I would like to know your suggestion, prequations to be taken and feedback.> I would like to know your suggestion, prequations to be taken and feedback.
- take a backup (database + binaries)
- install the patchset 10.2.0.4 according to the README
- install all interim patches (see below)
- read the following notes:
871735 - Current patch set for Oracle 10.2.0
1137346 - Oracle Database 10g: Patches for Release 10.2.0.4
830576 - Parameter recommendations for Oracle 10g
Markus -
Issue after Oracle database patch upgrade 10.2.0.4
Hello,
After database patch application 10.2.0.4, we are getting error in starting database from 'startsap' script from sidadm user. We are getting this error in all the systems.
FYI...Once Oracle start explicitly, then there is no problem for starting SAP.
Please find the error below & let us know the path forward.
DQESAP05:dpiadm 24> more /home/dpiadm/startdb.log
50y0C
Wed Mar 4 12:19:41 IST 2009
LOGFILE FOR STARTING ORACLE
Trying to start DPI database ...
Wed Mar 4 12:19:41 IST 2009
checking required environment variables
ORACLE_HOME is >/oracle/DPI/102_64<
ORACLE_SID is >DPI<
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 04-MAR-2009 12:19:41
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/DPI/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = DQESAP05) (PORT = 1527))) (CONNECT_DATA = (SID = DPI) (GLOBAL_NAME = DPI.WORLD)))
OK (10 msec)
tnsping: V2 connect to DPI
Wed Mar 4 12:19:41 IST 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Mar 4 12:19:42 IST 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
50y0CBstartdb.log (66%)@50y0C50y0C----
Wed Mar 4 12:19:50 IST 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Mar 4 12:19:50 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'
Disconnected
Wed Mar 4 12:19:51 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/DPI/SYS/exe/run/startdb: Terminating with error code 12
It is not able to get below information
"ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'"Hi,
Please find few links below:
[Re: Oracle 10g upgrade - DBUA DB is not started]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=403004]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=819829]
Hope this helps.
Manoj -
Oracle 10.2.0.4 patch upgrade
Hi,
We have recently upgraded oralce 10.2.0.2 to 10.2.0.4 we downloaed the Oracle patches as per snote # 871735 for SUN aparc 64 bit .
We have used OUI and done the upgrade as per the instaructions in the readme file of the patch.
I have observed in Snote #1137346 that after upgrading to 10.2.0.4 apply the pacthes as per snotes #1137346.
Environment:
R/3 4.6c and BW 7.0
OS : Sun sparc 5.9 64 bit
DB : Oracle 10.2.0.4
Please suggest does applying the oracle patches as per snote # 871735 is enough or we have to go as per#1137346 also....
Thanks,
Subhash.G> We have recently upgraded oralce 10.2.0.2 to 10.2.0.4 we downloaed the Oracle patches as per snote # 871735 for SUN aparc 64 bit .
> We have used OUI and done the upgrade as per the instaructions in the readme file of the patch.
Ok.
> I have observed in Snote #1137346 that after upgrading to 10.2.0.4 apply the pacthes as per snotes #1137346.
> Please suggest does applying the oracle patches as per snote # 871735 is enough or we have to go as per#1137346 also....
Yes - you also have to apply all the interim patches too. You updated your database only to 10.2.0.4; this version has also bugs which are fixed byy applying all the patches of note 1137346.
Markus -
Hidden parameters appears after Oracle 11gR2 upgrade
Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_functionI just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected. -
Tuxedo 8.0 and Oracle patch 9.2.0.8
Hi,
We have installed Oracle patch 9.2.0.8 into UNIX machine. We are using Tuxedo for middleware that using an API Application through Tuxedo to provision onto Oracle database.
Since Oracle patch 9.2.0.8 installed, Tuxedo produced core file.
It has been mentioned by Oracle Metalink Doc ID 455832.1 that potentially because both server and client have to be in synch version. The Oracle patch has been installed on UNIX server for both
My question is that:
- Is there any Oracle client on Tuxedo (8.0) patch that need to be installed ?
- Or should we upgrade Tuxedo to later version, if yes which version that in synch with Oracle patch 9.2.0.8 ?
At the moment no workarround is applied.
Thank in advance for any info and help.
--AgeHi Todd,
Thank you for your usefull answer. I will take this point with our application's vendor.
Do you know if we would like to upgrade to a higher version or best to the latest 10gR3, is there any contact Support that we can contact to get software kit (weblink for download etc.). I am not sure the license contract agreement of our company, in parallel I would like to know the procedure from your side (Oracle Tuxedo).
Regards,
--Age -
Oracle Patch 10.2.0.4 error - Windows Server 2008 x64
Hello!
Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
*************installActions2010-08-06_11-02-02PM.log******************
Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The number of files bootstrapped for the jre is 551.
The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
INFO: CLASSPATH =
INFO: Username:Administrator
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 10.2.0.4.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.patchset.db_Custom
INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
INFO: Checking checkToInstallCCR
This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
INFO: oracle.ons Product Location: Empty path specified.
INFO: oracle.sysman.repository.db Product Location: Empty path specified.
INFO:
*** Language Selection Page***
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
INFO: *** Entering Component: oracle.ons installation
INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
INFO: User Selected: Yes/OK
*************installActions2010-08-06_11-02-02PM.log******************
**************oraInstall2010-08-06_11-02-02PM.err***********************
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
at getOSName.performQuery(getOSName.java:16)
at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
**************oraInstall2010-08-06_11-02-02PM.err***********************
***************oraInstall2010-08-06_11-02-02PM.out**************************
**************oraInstall2010-08-06_11-02-02PM.out*************************A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
HTH
Srini -
10.2.0.2 Patch Upgrade issue
hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
RameshHai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM -
Hello,
i will do an upgrade and i downloaded patch file "p6890831_111070_Linux-x86". So i extractet the folder and call ./runInstaller.
But if i do this i get an error message: "./runInstaller: line 197: /home/oracle/patch: Datei oder Verzeichnis nicht gefunden" That means in english "File or Folder not found".
On line 197 i've found: $CMDDIR/install/.oui $*
What is the problem? What do i wrong?
I use RHEL 5!
Edited by: user6368351 on 08.10.2009 14:20Hello,
i have done an upgrade from 10.2.0.4 to 11.1.0.6. There was no problem and 11.1.0.6 works right now. But i can't run the installer for the 11.1.0.7 patchset.
EDIT:
If i run the installer with root, so i get the typical message:
Oracle Universal Installer wird gestartet...
Temporärer Speicherplatz wird überprüft: muss größer sein als 80 MB. Tatsächlich 202209 MB Erfolgreich
Swap-Speicher wird überprüft: muss größer sein als 150 MB. Tatsächlich 5887 MB Erfolgreich
Monitor wird überprüft: muss so konfiguriert sein, dass mindestens 256 Farben angezeigt werden. Tatsächlich 16777216 Erfolgreich
Vorbereitung für das Starten von Oracle Universal Installer aus /tmp/OraInstall2009-10-12_12-03-07PM. Bitte haben Sie einen Moment Geduld...
Der Benutzer ist root. Oracle Universal Installer kann bei einem Root-Benutzer nicht mit der Installation fortfahren.
This means, i have to run the installer with an oracle user.
But ich I will run it with oracle rights, the installer will not run.
Edited by: user6368351 on 12.10.2009 03:04
Maybe you are looking for
-
How do I view a Backed Up Address file WITHOUT overwriting my existing one?
I think I have a few contacts that may have gotten erased in my address book. On a regular basis, I back up my contact list on an external hard drive. How do I view a contact in that address book back up copy without overwriting my whole file? Thanks
-
Need to upload a bill in pdf format to be viewed in biller direct screen
Well requirement is to view a bill(invoice) from the given format to pdf format on biller direct screen(UCES SCREEN), a web portal. Now ,first i have to change the invoice from its current format to pdf ,and Secondly,I have to send it to the web port
-
PDF files is not displayed properly in Adobe PDF version 11.0.06
have one pdf which can be viewed perfectly in Adobe version 9. The same PDF is not properly opening clearly in Adobe 11. My Adobe Pdf version is 11.0.06. PDF file info. This PDF has been created by iText 2.1.7 api from java File version of PDF file i
-
Messages not being marked as read?
In Yosemite mail app, my Exchange account emails, even after opening and closing the message it stays with the unread blue dot. Takes about 5 minutes to mark as read. My iCloud mail is almost instant. This didn't happen in Mavericks. Am I missing
-
Keep "2 most recent" not working in podcasts
when i set iTunes to limit a podcast to limit a podcast to the 2 most recent why does it keep every podcast and not delete any ???