Oracle Portal Configuration Assistant will not connect
I am attempting to install an Oracle Portal 9iAS with the software provided in the book "Application Server Portal Handbook" by Seve Vandivier and Kelly Cox.
Ok, all goes well until I get to the Portal Configuration Assistant. I want to connect to the database (on a different box over the network) and install the repository.
No go. I cannot login. I know the password for SYS. but the connect descriptor it is looking for should be noodle:1521:fastdb (noodle is the host, 1521 the port, fastdb the SID).
I cannot figure out why this does not connect. If I open a SQLplus window on this computer, I can connect successfully, although this would use a TNS connection, which is not the same.
So, where am I going wrong?????
One more clue, the book talks about connecting to an Oracle 8i database, and I am trying to connect to an Oracle 9i database. Does this matter???
Any help would be appreciated!
Thanks,
Edward
[email protected]
http://www.1st-R8.com
Assuming you are installing 9ias Rel1 with portal 309.
Apply the RDBMS 8.1.7.4 patch to the 9ias Oracle Home and re-run the configuration assistant. It's been awhile since I've had to install Rel1, but that was the fix when we last asked oracle about it.
Similar Messages
-
Oracle portal configuration assistant
cannot get past step 2 of the oracle portal configuration assistant setup.
I enter my sys password and connect string but a screen pops up saying either my password is incorrect or my connect string is incorrect.
The connect string should be in format hostname:port:SID
my hostname = pluto
port = 1521
sid = voyager
I am running a 9i database on XPI've also a problem with portal ,
It begins the creation and at 20% :
"An error has occured during processing install , see the install.log in the <ORACLE_HOME>/assistants/opca"
Installation process stops at this point , why? -
Adobe Download Assist will not connect - multiple attemps
I've successfully downloaded a trial version of photoshop, yet when I try to download after effects the ADA will not connect. I have removed the program twice with reinstallation, and still no luck. Advice??
Yes we don't have direct links for the trials. You might try a different web browser as well as a selective start up. What type of virus protection software and software firewall are you using? Did you disable them or direct the software firewall to allow connections from the Adobe Download Assistant?
-
Configuration assistants will not install
I have downloaded and installed Oracle 10g running on MAC OS system. However, I get errors when trying install the configuration assistants:
Oracle Net Configuration Assistant
Oracle Database Configuration Assistant
ISQL Plus Configuration Assistant
Any assistance you can provide would be greatly appreciated. Thanks.Here are the following failed commands log:
Last login: Thu Jul 30 17:50:05 on ttys000
ashley-pendergrasss-macbook-pro:~ ashleypendergrass$ /Users/ashleypendergrass/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands ; exit;
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main
directory that contains Oracle products.
Set and export ORACLE_HOME, then re-run.
UnsatisfiedLinkError exception loading native library: njni10
Exception in thread "main" java.lang.UnsatisfiedLinkError: get
at oracle.net.common.NetGetEnv.get(Native Method)
at oracle.net.config.Config.getNetDir(Unknown Source)
at oracle.net.config.Config.initConfig(Unknown Source)
at oracle.net.config.Config.<init>(Unknown Source)
at oracle.sysman.assistants.util.NetworkUtils.<init>(NetworkUtils.java:225)
at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:264)
at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:686)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:205)
at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.<init>(ProgressOnlyHost.java:92)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:156)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:94)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:180)
iSQL*Plus 10.2.0.4.0
Copyright (c) 2003, 2007, Oracle. All Rights Reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
logout -
Cisco Network Assistant Will Not Connect to 3825 Router Using http
Trying to use the CNA to connect to my 3825 router, in preparation for 2960x switches we are going to purchase. I cannot connect using http - read/write. It seems as though the username and password fail. I can however, connect Read – only Level 1, and the username and password work fine and I am logged in. Is there something I can check in the Router configuration for the Network Assistant to work?
ThanksIt will be helpful for other community members to know the solution and cause, if can be shared.
-Thanks
Vinod -
OEM10g install: ORACLE NET CONFIGURATION ASSISTANT HANGS
After the execution of "allroot.sh", the configuration assistant window comes up and then "Oracle Net Configuration Assistant" shows "in progress..." indefinitely. I can not proceed further. When I stop it, the OUI exits.
I raised a TAR 3 times but did not get a resolution. If any of you had this issue, I would appreciate if you could help me
Thanks
Mohammed
OS: HP-UX B.11.23 U ia64
OEM: 10.2.0.3 (downloaded from Oracle)Oracle Net Configuration Assistant will not install, here is the end of the install log.
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file C:\Oracle\product\10.1.0\Client_1\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Oracle Net Configuration Assistant
C:\Oracle\product\10.1.0\Client_1\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\Oracle\product\10.1.0\Client_1\bin -classpath ";C:\Oracle\product\10.1.0\Client_1\jdk\jre\\lib\rt.jar;C:\Oracle\product\10.1.0\Client_1\jlib\ldapjclnt10.jar;C:\Oracle\product\10.1.0\Client_1\jlib\ewt3.jar;C:\Oracle\product\10.1.0\Client_1\jlib\ewtcompat-3_3_15.jar;C:\Oracle\product\10.1.0\Client_1\network\jlib\NetCA.jar;C:\Oracle\product\10.1.0\Client_1\network\jlib\netcam.jar;C:\Oracle\product\10.1.0\Client_1\jlib\netcfg.jar;C:\Oracle\product\10.1.0\Client_1\jlib\help4.jar;C:\Oracle\product\10.1.0\Client_1\jlib\jewt4.jar;C:\Oracle\product\10.1.0\Client_1\jlib\oracle_ice.jar;C:\Oracle\product\10.1.0\Client_1\jlib\share.jar;C:\Oracle\product\10.1.0\Client_1\jlib\swingall-1_1_1.jar;C:\Oracle\product\10.1.0\Client_1\jdk\jre\\lib\i18n.jar;C:\Oracle\product\10.1.0\Client_1\jlib\srvmhas.jar;C:\Oracle\product\10.1.0\Client_1\jlib\srvm.jar;C:\Oracle\product\10.1.0\Client_1\network\tools" oracle.net.ca.NetCA /orahome C:\Oracle\product\10.1.0\Client_1 /orahnam OraClient10g_home1 /instype custom /inscomp client,oraclenet,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\Oracle\product\10.1.0\Client_1\network\install\netca_clt.rsp
Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files\Oracle\Inventory\logs\installActions2008-04-15_11-01-05AM.log *** -
I was installing the iAS1.0.2.2 and at the Portal Configuration Assistant, at the 23% I received the following error:
"An unexpected error ocurred during the Install Process. Check the install.log ....."
(FYI this is the second time I try to install it and in both cases I received the same error at the same point, so I decided to ask for help)
At the end of the Install.log is the following:
=====================
STEP 7 : Installing WWC layer Components
INSTALL_ACTION : installWWC(): ..\..\bin\sqlplus portal30/portal30@<DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)HOST=administrator)(PORT=1521)))(CONNECT_DATA=(SID=virtual))) @..\..\portal30\admin\plsql\wwc\wwcinst.sql portal30 USERS TEMP wvinswwc.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted
=========================
I noticed during the installation, before the Configuration Assistant (aprox at 97%), the installation opened a DOS session and I could see some errors with some Indexes but I don't know in which Log are registered. maybe it can help to troubleshoot my above problem?
Operating System: NT4 SP6
Database: 8.1.7.0 standard edition
iAS 1.0.2.2 standard edition
both under the same machine
Let me know if there is any other info I can provide.
Tks in advance!There has been some confusion around certification on SE over the past week. I want to clarify the situation.
We discovered an issue with the Portal on SE last week. We inadvertently used function based and bitmapped indexes (EE only features). This issue has been masked to date because the install proceeded normally after the errors were raised. In 3.0.9 we made the install more strict in that it will stop by default if it hits an unexpected error.
On further research, we have determined that these errors have little or no impact on the general functioning of the product and as such are maintaining the position that Portal 3.x is indeed certified on 8.1.7
Standard Edition.
There is unfortunately a necessary work around to the install issue (which we will rectify as soon as possible). In order to install on SE, you must execute the Oracle Portal Configuration Assistant (OPCA) from
the command line and specify the "verbose" mode (see next post). In this mode, the errors are ignored and the install proceeds appropriately.
Regards,
The Oracle9iAS Portal Development Team -
Oracle Portal Configuration failure during Oracle9iAS installation!!
Hello all,
I have couple of questions:
1) Iam trying to install the Oracle9iAS files that i have
downloaded with MINIMAL edition option. Installation tells me
that it contains the Oracle Portal (just like Standard,
Enterprise edition). Everything goes fine with the installion
except that the configuration of the oracle portal configuration
assistant (OPCA) fails with th following message::
Silent Mode : false
Portal Schema : portal30
Portal DAD : portal30
SSO Schema : portal30_sso
SSO DAD : portal30_sso
Listener Hostname : clmwin2ksrv
Listener Port set from Command Line :80
Connect String : change_on_install
SYS Password : ********
Default TableSpace : TEMP
Temporary TableSpace : USERS
Document TableSpace : USERS
Logging TableSpace : TRUE
Demo Install Option : FALSE
Log Verbose Mode : FALSE
Install Reports Integration : TRUE
INSTALL : Database Version : 8.1.6
INSTALL_DEBUG : Tablespace size: 180728
STEP 4 : Creating Portal Schema...
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wwv\wdbisys.sql
portal31 USERS TEMP wvinssys.log
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wws\cruser.sql
portal31 portal31 USERS TEMP us USERS
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
portal31/portal31@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\wws\global.sql
portal31 portal31 USERS TEMP us USERS
INSTALL_ACTION:installGlobalComponents() :Loading Java class for
MD5 encryption...
INSTALL_ACTION:installGlobalComponents() : ..\..\bin\loadjava -
resolve -verbose -thin -user
portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
\admin\plsql\wwc\SSOHash.class
D:\oracle\iSuites\assistants\opca>REM
D:\oracle\iSuites\assistants\opca>REM $Header:
runljava.bat@@/main/3 \
D:\oracle\iSuites\assistants\opca>REM Checked in on Fri Nov 17
15:32:36 PST 2000 by meoropez \
D:\oracle\iSuites\assistants\opca>REM Copyright (c) 2000 by
Oracle Corporation. All Rights Reserved. \
D:\oracle\iSuites\assistants\opca>REM $
D:\oracle\iSuites\assistants\opca>REM
D:\oracle\iSuites\assistants\opca>Rem For running the Loadjava
from the Configuration Assistant.
D:\oracle\iSuites\assistants\opca>..\..\bin\loadjava -resolve -
verbose -thin -user
portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
\admin\plsql\wwc\SSOHash.class
STEP 5 : Creating SSO Schema...
INSTALL_ACTION: createSSOSchema() : ..\..\bin\sqlplus
SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
(SID=ora8db))) @..\..\portal30\admin\plsql\sso\ssodbusr.sql
portal31_sso USERS TEMP
ORA-04042: procedure, function, package, or package body does
not exist
Errors encountered in the Install process. Installation Aborted.
I can't make out what could be wrong with the ssodbusr.sql
script!! Iam trying to install the portal schema to an already
existing Oracle8i (8.1.6) database (SID-ora8db).
2) Do i really need this oracle PORTAL stuff?..all i want is
develop/deploy J2EE applications on Oracle9iAS. Unfortunately i
can't find any j2ee related info in the documentation except
about the installation of OC4J.zip (oracle container for j2ee)
which doesn't exists in my download!!
Can anyone please help me out...why is Oracle9iAS so
complicated as against the other commercial servers????
TIA
ClementHi Clement,
If you are using 9iAS 10221, You can install J2EE by choosing
the Core Installation Type, which is the first installation
type. It's so easy to install Core (which contains J2EE, Apache
and Webcache). And takes around 15 minutes.
If you are using 10220, it doesn't contain J2EE. So you may want
to upgrade to 10221 for your need. You'll find installation
for Core fast and easy. Hope it helps your need.
Thanks,
yuning -
Imac will not connect to Airport Extreme when configured WPA/WPA2
Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktopshehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn -
Every time my MacBook Pro is put to sleep, it will not connect to the internet upon reopening unless I perform diagnostic assistant.
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. Reinstall OS X. -
My airport will not connect to the internet via my modem. Worked for 3 years. Suddenly stopped. Main host computer is hp running windows xp.
When trying to connect windows states connection was cancelled. I have had hp checked by compputer repair and still have same problem?The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks. -
Oracle 11g "Oracle Database Configuration Assistant" failed
Hi
am trying to install oracle 10g databse .
am getting Configuration assistant "Oracle Database Configuration Assistant" failed
in log file i see
[Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
i have created microsoft loop back adapator and configured TCP/IP.
what would be the problem?At the Oracle Support site https://support.oracle.com
To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
HTH
Srini -
Oracle Net Configuration Assistant failed during installtion ..
Hello,
I have installed oracle 11g on windows 7 enterprise editions..64 bit..
During installtion i am gettign
[INS-20802] Oracle Net Configuration Assistant failed. meaasge
INFO: Error: Environmental error detected: Oracle Home is set to "C:\app\oracle\product\11.2.0\dbhome_3\" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
INFO: Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
I removed all environemnt variable from system related to oracle home..
But i have analother oracle installtion on same box under "C:\app\oracle\product\11.2.0\dbhome_3\" ...
we have oracle key entries in regedit of windows..but i can not remove that..
IS new installtion is refering to old home..?
Any idea how to correct it ...Abdelhadi_DBA wrote:
Hi osama,
Q1:What does implied that oracle database version is not vertified for OS?Oracle certifies its software on various OS versions - this certification ensures that the Oracle software will work as advertised on the various OS's that have been certified. If a specific software is not certified on a specific OS, that the software may or may not work as advertised, and Oracle will not help in troubleshooting or fixing any errors.
Q2 Can you please give us the liste of OS supported by oracle ?
Thank you in advance.Pl see the Install Docs for the certified OS versions
11gR1 - http://tahiti.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
11gR2 - http://tahiti.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
for example - 11gR1 on Windows - http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
HTH
Srini -
I am a newbie in a Linux and Oracle ,so
can somebody help me to solve this problem, i've done everything from
this site : http://www.oracle-base.com/articles/11g/OracleDB11gR1InstallationOnFedora7.php
and i've got this error :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /home/oracle/app/oracle/product/11.1.0/db_1/bin/netca /orahome /home/oracle/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /home/oracle/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /home/oracle/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00b6fdd3, pid=7312, tid=3086751952
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [libc.so.6+0x6ddd3] index+0x63
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/home/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
thxLet's assume your software installation was successful. Even if no database was created at this time. Check the Oracle Universal Installer inventory to verify this. At this time you should verify your connectivity, as previously suggested, verify the hosts file properly describes the hostname.domainname and the simple hostname. Verify the security is disabled, according to the install guide you have referred to.
Then check the environment variables PATH, ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH are properly set and issue the commands:
1) netmgr, this will be used to configure the listener and the tnsnames.ora file, you could use the netca if you want, this is a subset of netmgr.
2) dbca, this will assist you in creating the database. there you will find an option to setup enterprise manager, ensure you have it selected so the EM repository is created.
3) You won't find isqlplus on 11g, but the regular sqlplus CLI is available
~ Madrid -
[INS-20802] Oracle Database Configuration Assistant failed
I am trying to install Oracle 11g R2 on my windows 7 Professional, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?
Oracle Advanced Security 11.2.0.1.0
Oracle Internet Directory Client 11.2.0.1.0
HAS Files for DB 11.2.0.1.0
Oracle Net Listener 11.2.0.1.0
Oracle Net Services 11.2.0.1.0
Oracle Text 11.2.0.1.0
Oracle Database 11g 11.2.0.1.0
Oracle COM Automation Feature 11.2.0.1.0
Oracle OLAP 11.2.0.1.0
Oracle Spatial 11.2.0.1.0
Oracle Partitioning 11.2.0.1.0
Enterprise Edition Options 11.2.0.1.0
Oracle Database 11g 11.2.0.1.0
INFO: OiicSaveInvWCCE:After saving the inventory. This is an Install session.
INFO: SaveInvWCCE JRE files in Scratch :0
INFO: Aggregate Name as given in the action for additional utility tools: oracle.rdbms.util
INFO: Aggregate Location as given in the action for additional utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
INFO: checking if the file C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml is present?
INFO: Can proceed with additional utility processes ? : true
INFO: Copying C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the permissions og-rwx
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
INFO: No of Tools: 1
INFO: Starting to execute the additional tools
INFO: Executing utility tool: ADR Setup Utility
INFO: Executing utility tool: ADR Setup Utility
INFO: Command = C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir=C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: Successfully executed utility tool: ADR Setup Utility
INFO: All the tools have been executed Successfully
INFO: Complete execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch :0
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: C:/Users/User/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: processing tool: Launch browser
INFO: removing plugin invocation for: Launch browseras it doesnt support clone mode
INFO: removing plugin invocation for: Launch browseras it doesnt support add node mode
INFO: Namespace prefix 'agg' used but not declared.
INFO: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
INFO: cf session for OH: C:/app/User/product/11.2.0/dbhome_1\ TL Aggr: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
INFO: aggr ref length : 6
INFO: cf session hashcode: 1847125318
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@5059a331
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Created config job for Oracle Configuration Manager Configuration
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: INFO: Parsing command line arguments:INFO: Parameter "orahome" = C:\app\User\product\11.2.0\dbhome_1INFO: Parameter "orahnam" = OraDb11g_home1INFO: Parameter "instype" = typicalINFO: Parameter "inscomp" = client,oraclenet,javavm,server,anoINFO: Parameter "insprtcl" = tcp,nmpINFO: Parameter "cfg" = localINFO: Parameter "authadp" = NO_VALUEINFO: Parameter "responsefile" = C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO: Parameter "silent" = trueINFO: Done parsing command line arguments.INFO: Oracle Net Services Configuration:INFO: Profile configuration complete.INFO: Oracle Net Listener Startup:INFO: Running Listener Control:
INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: Listener Control complete.INFO: Setting Listener service to start automatically.INFO: Listener started successfully.INFO: Listener configuration complete.INFO: Default local naming configuration complete.INFO: Oracle Net Services configuration successful. The exit code is 0WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO:
INFO:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command C:\Windows\system32\cmd /c call C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl.168.2.5 -emConfiguration LOCAL -storageType FS -datafileDestination C:\app\User\oradata -datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -automaticMemoryManagement true -totalMemory 3237 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO: Oracle Database Configuration Assistant failed.
INFO: Oracle Database Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <setup>
INFO: Completed validating view at state <setup>
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Get view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
INFO: Initializing view <FinishUI> at state <finish>
INFO: Completed initializing view <FinishUI> at state <finish>
INFO: Displaying view <FinishUI> at state <finish>
INFO: Completed displaying view <FinishUI> at state <finish>
INFO: Loading view <FinishUI> at state <finish>
INFO: Install Succeeded: true
INFO: Config Tool Succeeded: false
INFO: Remote Install Succeeded: true
INFO: Completed loading view <FinishUI> at state <finish>
INFO: Localizing view <FinishUI> at state <finish>
INFO: Completed localizing view <FinishUI> at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
Edited by: rnair on Mar 18, 2013 10:08 AMrnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.
Maybe you are looking for
-
NSS6000: unable to map as a network drive in Win7pro
I have setup my NSS6000 through the web browser interface (setup RAID5, created a volume, created a share (using CIFS protocol), and created a couple usernames). Now I am trying to map my share as a network drive and it is not working. I select Map a
-
Fixed due date for billing created in a period
Hi We want the new payment tem that should work in the following way Billing date from 01.01.2008 to 31.03.2008 due date should be 20.04.2008 Billing date from 01.04.2008 to 30.06.2008 due date should be 20.07.2008 Please note that the billing period
-
Global template and rollouts vs. Solution Directory
Hello, I would like to know what is the best way to maintain the global template and the related rollouts documentation. I know the functionality of Solution Directory, ie. it should be the primary place to maintain a solution in production, changes
-
Servlet Communication with Java WebStart
Hi there, we have an application that works fine with Java WebStart whenever we start it in a local area network. But from outside the LAN the application cannot communicate to it's servlets. I use the codebase IP address with the servlet runner's po
-
Is there a basic phone with wifi?
Is there a basic phone with wifi capability? Looking for a phone for my 12 year old, he doesn't need a $30 or $40 month data plan.