Oracle portal configuration assistant

cannot get past step 2 of the oracle portal configuration assistant setup.
I enter my sys password and connect string but a screen pops up saying either my password is incorrect or my connect string is incorrect.
The connect string should be in format hostname:port:SID
my hostname = pluto
port = 1521
sid = voyager
I am running a 9i database on XP

I've also a problem with portal ,
It begins the creation and at 20% :
"An error has occured during processing install , see the install.log in the <ORACLE_HOME>/assistants/opca"
Installation process stops at this point , why?

Similar Messages

  • Oracle Portal Configuration Assistant will not connect

    I am attempting to install an Oracle Portal 9iAS with the software provided in the book "Application Server Portal Handbook" by Seve Vandivier and Kelly Cox.
    Ok, all goes well until I get to the Portal Configuration Assistant. I want to connect to the database (on a different box over the network) and install the repository.
    No go. I cannot login. I know the password for SYS. but the connect descriptor it is looking for should be noodle:1521:fastdb (noodle is the host, 1521 the port, fastdb the SID).
    I cannot figure out why this does not connect. If I open a SQLplus window on this computer, I can connect successfully, although this would use a TNS connection, which is not the same.
    So, where am I going wrong?????
    One more clue, the book talks about connecting to an Oracle 8i database, and I am trying to connect to an Oracle 9i database. Does this matter???
    Any help would be appreciated!
    Thanks,
    Edward
    [email protected]
    http://www.1st-R8.com

    Assuming you are installing 9ias Rel1 with portal 309.
    Apply the RDBMS 8.1.7.4 patch to the 9ias Oracle Home and re-run the configuration assistant. It's been awhile since I've had to install Rel1, but that was the fix when we last asked oracle about it.

  • 9iAS 1.0.2.2/Portal 3.0.9 - Installation Error at "Portal Configuration Assistant"

    I was installing the iAS1.0.2.2 and at the Portal Configuration Assistant, at the 23% I received the following error:
    "An unexpected error ocurred during the Install Process. Check the install.log ....."
    (FYI this is the second time I try to install it and in both cases I received the same error at the same point, so I decided to ask for help)
    At the end of the Install.log is the following:
    =====================
    STEP 7 : Installing WWC layer Components
    INSTALL_ACTION : installWWC(): ..\..\bin\sqlplus portal30/portal30@<DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)HOST=administrator)(PORT=1521)))(CONNECT_DATA=(SID=virtual))) @..\..\portal30\admin\plsql\wwc\wwcinst.sql portal30 USERS TEMP wvinswwc.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
    ORA-00439: feature not enabled: Function-based indexes
    Errors encountered in the Install process. Installation Aborted
    =========================
    I noticed during the installation, before the Configuration Assistant (aprox at 97%), the installation opened a DOS session and I could see some errors with some Indexes but I don't know in which Log are registered. maybe it can help to troubleshoot my above problem?
    Operating System: NT4 SP6
    Database: 8.1.7.0 standard edition
    iAS 1.0.2.2 standard edition
    both under the same machine
    Let me know if there is any other info I can provide.
    Tks in advance!

    There has been some confusion around certification on SE over the past week. I want to clarify the situation.
    We discovered an issue with the Portal on SE last week. We inadvertently used function based and bitmapped indexes (EE only features). This issue has been masked to date because the install proceeded normally after the errors were raised. In 3.0.9 we made the install more strict in that it will stop by default if it hits an unexpected error.
    On further research, we have determined that these errors have little or no impact on the general functioning of the product and as such are maintaining the position that Portal 3.x is indeed certified on 8.1.7
    Standard Edition.
    There is unfortunately a necessary work around to the install issue (which we will rectify as soon as possible). In order to install on SE, you must execute the Oracle Portal Configuration Assistant (OPCA) from
    the command line and specify the "verbose" mode (see next post). In this mode, the errors are ignored and the install proceeds appropriately.
    Regards,
    The Oracle9iAS Portal Development Team

  • Oracle Portal Configuration failure during Oracle9iAS installation!!

    Hello all,
    I have couple of questions:
    1) Iam trying to install the Oracle9iAS files that i have
    downloaded with MINIMAL edition option. Installation tells me
    that it contains the Oracle Portal (just like Standard,
    Enterprise edition). Everything goes fine with the installion
    except that the configuration of the oracle portal configuration
    assistant (OPCA) fails with th following message::
    Silent Mode : false
    Portal Schema : portal30
    Portal DAD : portal30
    SSO Schema : portal30_sso
    SSO DAD : portal30_sso
    Listener Hostname : clmwin2ksrv
    Listener Port set from Command Line :80
    Connect String : change_on_install
    SYS Password : ********
    Default TableSpace : TEMP
    Temporary TableSpace : USERS
    Document TableSpace : USERS
    Logging TableSpace : TRUE
    Demo Install Option : FALSE
    Log Verbose Mode : FALSE
    Install Reports Integration : TRUE
    INSTALL : Database Version : 8.1.6
    INSTALL_DEBUG : Tablespace size: 180728
    STEP 4 : Creating Portal Schema...
    INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
    SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
    (PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
    (SID=ora8db))) @..\..\portal30\admin\plsql\wwv\wdbisys.sql
    portal31 USERS TEMP wvinssys.log
    INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
    SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
    (PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
    (SID=ora8db))) @..\..\portal30\admin\plsql\wws\cruser.sql
    portal31 portal31 USERS TEMP us USERS
    INSTALL_ACTION:installGlobalComponents() : ..\..\bin\sqlplus
    portal31/portal31@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
    (PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
    (SID=ora8db))) @..\..\portal30\admin\plsql\wws\global.sql
    portal31 portal31 USERS TEMP us USERS
    INSTALL_ACTION:installGlobalComponents() :Loading Java class for
    MD5 encryption...
    INSTALL_ACTION:installGlobalComponents() : ..\..\bin\loadjava -
    resolve -verbose -thin -user
    portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
    \admin\plsql\wwc\SSOHash.class
    D:\oracle\iSuites\assistants\opca>REM
    D:\oracle\iSuites\assistants\opca>REM $Header:
    runljava.bat@@/main/3 \
    D:\oracle\iSuites\assistants\opca>REM Checked in on Fri Nov 17
    15:32:36 PST 2000 by meoropez \
    D:\oracle\iSuites\assistants\opca>REM Copyright (c) 2000 by
    Oracle Corporation. All Rights Reserved. \
    D:\oracle\iSuites\assistants\opca>REM $
    D:\oracle\iSuites\assistants\opca>REM
    D:\oracle\iSuites\assistants\opca>Rem For running the Loadjava
    from the Configuration Assistant.
    D:\oracle\iSuites\assistants\opca>..\..\bin\loadjava -resolve -
    verbose -thin -user
    portal31/portal31@clmwin2ksrv:1541:ora8db ..\..\portal30
    \admin\plsql\wwc\SSOHash.class
    STEP 5 : Creating SSO Schema...
    INSTALL_ACTION: createSSOSchema() : ..\..\bin\sqlplus
    SYS/<sys_password>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
    (PROTOCOL=TCP)(HOST=clmwin2ksrv)(PORT=1541)))(CONNECT_DATA=
    (SID=ora8db))) @..\..\portal30\admin\plsql\sso\ssodbusr.sql
    portal31_sso USERS TEMP
    ORA-04042: procedure, function, package, or package body does
    not exist
    Errors encountered in the Install process. Installation Aborted.
    I can't make out what could be wrong with the ssodbusr.sql
    script!! Iam trying to install the portal schema to an already
    existing Oracle8i (8.1.6) database (SID-ora8db).
    2) Do i really need this oracle PORTAL stuff?..all i want is
    develop/deploy J2EE applications on Oracle9iAS. Unfortunately i
    can't find any j2ee related info in the documentation except
    about the installation of OC4J.zip (oracle container for j2ee)
    which doesn't exists in my download!!
    Can anyone please help me out...why is Oracle9iAS so
    complicated as against the other commercial servers????
    TIA
    Clement

    Hi Clement,
    If you are using 9iAS 10221, You can install J2EE by choosing
    the Core Installation Type, which is the first installation
    type. It's so easy to install Core (which contains J2EE, Apache
    and Webcache). And takes around 15 minutes.
    If you are using 10220, it doesn't contain J2EE. So you may want
    to upgrade to 10221 for your need. You'll find installation
    for Core fast and easy. Hope it helps your need.
    Thanks,
    yuning

  • Oracle 11g "Oracle Database Configuration Assistant" failed

    Hi
    am trying to install oracle 10g databse .
    am getting Configuration assistant "Oracle Database Configuration Assistant" failed
    in log file i see
    [Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    i have created microsoft loop back adapator and configured TCP/IP.
    what would be the problem?

    At the Oracle Support site https://support.oracle.com
    To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
    If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
    HTH
    Srini

  • Error in portal configuration assistant

    Hi,
    While trying to install Oracle instant portal, I am getting an error during portal configuration assistant step.
    ORA-12154 : tns cannot resolve conn ...
    What do I need to do in order to fix this error? I see a tnsnames.ora in 2 locations:
    {oracle_home}/infra/network/admin
    {oracle_home}/portal/network/admin
    What is the reason for this error and what needs to be done to fix it.
    thanks,
    Samit

    The services of infrastructure instance must be up before installing Portal or other Middle Tier instances.

  • Oracle Net Configuration Assistant failed during installtion ..

    Hello,
    I have installed oracle 11g on windows 7 enterprise editions..64 bit..
    During installtion i am gettign
    [INS-20802] Oracle Net Configuration Assistant failed. meaasge
    INFO: Error: Environmental error detected: Oracle Home is set to "C:\app\oracle\product\11.2.0\dbhome_3\" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
    INFO: Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
    I removed all environemnt variable from system related to oracle home..
    But i have analother oracle installtion on same box under "C:\app\oracle\product\11.2.0\dbhome_3\" ...
    we have oracle key entries in regedit of windows..but i can not remove that..
    IS new installtion is refering to old home..?
    Any idea how to correct it ...

    Abdelhadi_DBA wrote:
    Hi osama,
    Q1:What does implied that oracle database version is not vertified for OS?Oracle certifies its software on various OS versions - this certification ensures that the Oracle software will work as advertised on the various OS's that have been certified. If a specific software is not certified on a specific OS, that the software may or may not work as advertised, and Oracle will not help in troubleshooting or fixing any errors.
    Q2 Can you please give us the liste of OS supported by oracle ?
    Thank you in advance.Pl see the Install Docs for the certified OS versions
    11gR1 - http://tahiti.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
    11gR2 - http://tahiti.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
    for example - 11gR1 on Windows - http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
    HTH
    Srini

  • Portal Configuration Assistant Installation

    I tried installing IAS 9i in another machine where there is no Oracle database. I was successful until the Portal Configuration Tool. It seems to hung at about 22%. I checked the install.log. On the first part, it was able to obtain connection to another machine where my database is. But along the script where it is installing sequences, it lost its connection. Any ideas.

    I have the same problem in a diffrent environment. My database (8.1.7) is on the same machine (NT4 SP5) as the 9iAS, which was installed correctly. The Portal Configuration Assistant hangs at 50%, 67%, ... with the "not connected to oracle" error in the log. And the database OracleServicePORTAL (my database) is terminated without any error message. Does your DB stay alive?
    I got two hints, but they didn't solve the problem. Maybe they help you.
    1) db_block_size must be >=8k
    2) The Default Tablespace must be at least 150MB, not 100MB as told in the manual.
    null

  • Portal Configuration Assistant failedon 10g OAS

    Hi,
    I'm getting "Portal Configuration Assistant" failed error when trying to install OracleAS 10g (9.0.4.0.0)Applcation Server.
    I did all the pre-install stuff. I was able to install Infrastructure without any problem under /ias/oraDB using 'ias:dba'
    But when I tried to install Applcation Server/BI & Forms using 'ias:dba" under /ias/oraAS, I got following errors:
    "Configuration Assistants" "Portal Configuration Assistant" failed.
    Can anyone please Help me?
    Thanks in advance.
    Sakivs

    ummm...not exactly sure what you mena when you say "using 'ias:dba'"

  • INS-20802 Oracle net configuration assistant failed on windows server 2003 R2

    Hi all,
                I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
    But got Oracle net configuration assistant failed. Below is the log
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 0
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Created config job for Oracle Net Configuration Assistant
    INFO: Created config job for Oracle Database Configuration Assistant
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
    INFO: Entering ConfigClient.executeToolsInAggregate method
    INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    INFO:
    WARNING:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeToolsInAggregate method
    INFO: Calling event ConfigToolsExecuted
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
    INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
    INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
    INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    INFO:
    WARNING:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeSelectedToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration
    INFO: Performing Configuration
    INFO: Entering ConfigClient.init method
    INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
    INFO: Entering ConfigClient.initClientAndSession method
    INFO: ConfigClient.initClientAndSession status : connected to the config framework
    INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
    INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO: Exiting ConfigClient.init method
    INFO: Calling event ConfigSessionInitialized
    INFO: ConfigClient.registerOutErrStream method called
    INFO: Entering ConfigClient.getToolsList method
    INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
    INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
    INFO: Updating Transient Parameters in the Aggregates
    INFO: Updating Transient Parameters for oracle.server
    INFO: Updating Transient Parameters for oracle.assistants.netca.client
    INFO: Updating Transient Parameters for oracle.assistants.server
    INFO: Setting value to transient variable s_dbcaArgs
    INFO: Setting value to transient variable S_SYSMANPASSWORD
    INFO: Setting value to transient variable s_systemPasswordFlag
    INFO: Setting value to transient variable s_sysmanPasswordFlag
    INFO: Setting value to transient variable S_HOSTUSERPASSWORD
    INFO: Setting value to transient variable s_dbcaArgsOverride
    INFO: Setting value to transient variable windows_commandline_prefix
    INFO: Setting value to transient variable s_sysPasswordFlag
    INFO: Setting value to transient variable S_SYSPASSWORD
    INFO: Setting value to transient variable s_asmsnmpPasswordFlag
    INFO: Setting value to transient variable S_DBSNMPPASSWORD
    INFO: Setting value to transient variable s_dbsnmpPasswordFlag
    INFO: Setting value to transient variable S_ASMSNMPPASSWORD
    INFO: Setting value to transient variable S_SYSTEMPASSWORD
    INFO: Setting value to transient variable s_hostUserPasswordFlag
    INFO: Updating Transient Parameters for OuiConfigVariables
    INFO: Updating Transient Parameters for oracle.sysman.ccr
    INFO: Updating Transient Parameters for oracle.sysman.console.db
    INFO: Successfully updated Transient Parameters in the Aggregates
    INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
    INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
    INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
    INFO: Entering ConfigClient.assignAction method
    INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
    INFO: ConfigClient.assignAction action is of type :configuration
    INFO: Exiting ConfigClient.assignAction method
    INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: UnsatisfiedLinkError exception loading native library: oranjni11
    INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
    WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
    WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
    WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
    WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
    WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
    WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
    WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
    INFO:
    INFO: Error: jniGetOracleHome
    INFO: Oracle Net Services configuration failed.  The exit code is 1
    WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    INFO: ConfigClient.executeSelectedToolsInAggregate action performed
    INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
    INFO:
    The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
    INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
    WARNING: readme.txt file doesn't exits
    INFO: ConfigClient.saveSession method called
    INFO: Calling event ConfigSessionEnding
    INFO: ConfigClient.endSession method called
    INFO: Completed Configuration

    Hi Srini,
           The issue is resolved. Thanks for your response.
        The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
    Thanks
    Sunil

  • Oracle 11g oui-25031 error (oracle database configuration assistant)

    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
    This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any)
    before executing the same.
    The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script
    ->/oracle/app/oracle/product/11.1.0/db_1/oui/bin/runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
    runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
    ->
    oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: 인벤토리 포인터 위치 /etc/oraInst.loc을(를) 읽을 수 없거나 존재하지 않습니다.
    at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiIns tallAreaControl.java:1717)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:292)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:231)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:180)
    at oracle.sysman.oii.oiic.OiicRunConfig.loadInventory(OiicRunConfig.java :278)
    at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1004)
    Exception in thread "main" java.lang.NullPointerException
    at oracle.sysman.oii.oiic.OiicRunConfig.getArgumentList(OiicRunConfig.ja va:519)
    at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1007)
    hi!
    i install oracle database 11g 1R .
    error occur during installing oracle database.
    please solve it!!

    OS version is fedora 3.
    uname -a: Linux db9.sangjicom.ac.kr 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux
    ORACLE_HOME is registred ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 in bash_profile.
    Inventory is /oracle/app/Inventory.

  • "Oracle Database Configuration Assistant" failed

    I am attempting to install Oracle Database 11g R1 on CentOS 4.6 (Linux version 2.6.8-67.EL (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)).
    The failure occurs after the message : "Oracle Net Configuration Assistant" succeeded
    This message is in the log /u01/app/oraInventory/logs/InstallActions2008-07-07_09-22-20PM.log, and states:
    Command = oracle.assistants.server.DbcaCfgPlugIn has failed
    Exception : java.lang.OutOfMemoryError: Java heap space
    The instance instance was running after the failure and I could access it through EM, but after shutdown it cannot be brought up.
    Does anyone know what might be done to prevent the heap space error? This was my third attempt at installing. I specified DW type database and also automated backups. I may try one more time booting the system with telinit 3 to free up some memory by not running GUIs, and if that fails I may try eliminating automated backups from the install.
    Any other ideas?
    Thanks,
    akh

    FYI, I was able to install without error after the following changes:
    -reduced fs.file-max from 6553600 to 65536 (not sure where the extra 00 came from :-) )
    -changed type of database from data warehouse to standard/oltp
    -unchecked the option for automated backups
    Unfortunately, I'm not sure at this point which of the 3 changes made the most difference.
    -akh

  • Problem during installation oracle database configuration assistant FAILED

    Hi Dear,
    The Configurations are :
    VM OS : Oracle enterprise linux 5
    Trying to install : Oracle 11g R1
    I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
    Here is the long message showed by console :
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Parsing command line arguments:
    Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
    Parameter "orahnam" = OraDb11g_home1
    Parameter "instype" = typical
    Parameter "inscomp" = client,oraclenet,javavm,server,ano
    Parameter "insprtcl" = tcp
    Parameter "cfg" = local
    Parameter "authadp" = NO_VALUE
    Parameter "nodeinfo" = NO_VALUE
    Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
    Done parsing command line arguments.
    Oracle Net Services Configuration:
    Profile configuration complete.
    Listener started at port:1521
    Oracle Net Listener Startup:
    Running Listener Control:
    /u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
    Listener Control complete.
    Listener started successfully.
    Listener configuration complete.
    Oracle Net Services configuration successful. The exit code is 0
    Configuration assistant "Oracle Net Configuration Assistant" succeeded
    Output generated from configuration assistant "Oracle Database Configuration Assistant":
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
    Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    Please help me it's urgently

    Please help me i can't find any solution to resolve this trouble
    Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
    Sorry but i have no idea
    Waiting for the response

  • Configuration assistant "Oracle Database Configuration Assistant" failed

    I install oracle 10g on HP UX 11.23. I got this error :
    hecking for PHSS_33278; found Not found.     Failed <<<<
    Checking for PHSS_33279; found Not found.     Failed <<<<
    Checking for PHSS_33277; found Not found.     Failed <<<<
    Checking for PHSS_33279; found Not found.     Failed <<<<
    , my first question :
    can i pass this step, ?
    after all, my installation form is okey, but everything change become nightmare.
    I installation failed on Configuration Assistant :
    Configuration assistant "Oracle Database Configuration Assistant" failed
    OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
    1. check the details panel on the configuration assistant screen to see the error resulting in the failures
    2. fix the errors causing these failures
    3. select the failed assistants and click the retry button to retry the
    Configuration assistant "Oracle Database Configuration Assistant" failed
    The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

    But i still get this error. Do you have solution for this ?
    I installation failed on Configuration Assistant :+
    Configuration assistant "Oracle Database Configuration Assistant" failed+
    OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
    *1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
    *2. fix the errors causing these failures*
    *3. select the failed assistants and click the retry button to retry the*
    Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
    Edited by: user9198604 on Feb 25, 2010 3:37 AM

  • Oracle Net Configuration Assistant Error

    Hi,
    when i'm installing oracle 10.2.2 on RHEL 5.5 This error occured. how can i solve?
    log file;_
    INFO: Starting to execute configuration assistants
    INFO: Command = /oracle/orcl/10.2.2/jdk/jre//bin/java -Duser.dir=/oracle/orcl/10.2.2/network/jlib -classpath /oracle/orcl/10.2.2/jdk/jre//lib/i18n.jar:/oracle/orcl/10.2.2/jdk/jre//lib/rt.jar:/oracle/orcl/10.2.2/jlib/ewt3.jar:/oracle/orcl/10.2.2/jlib/ewtcompat-3_3_15.jar:/oracle/orcl/10.2.2/jlib/netcfg.jar:/oracle/orcl/10.2.2/network/jlib/netcam.jar:/oracle/orcl/10.2.2/network/jlib/netca.jar:/oracle/orcl/10.2.2/jlib/help4.jar:/oracle/orcl/10.2.2/jlib/jewt4.jar:/oracle/orcl/10.2.2/jlib/oracle_ice.jar:/oracle/orcl/10.2.2/jlib/share.jar:/oracle/orcl/10.2.2/jlib/swingall-1_1_1.jar:/oracle/orcl/10.2.2/jlib/srvmhas.jar:/oracle/orcl/10.2.2/jlib/srvm.jar:/oracle/orcl/10.2.2/network/tools:/oracle/orcl/10.2.2/jlib/ldapjclnt9.jar:/oracle/orcl/10.2.2/jlib/ldapjclnt10.jar:/oracle/orcl/10.2.2/oui/jlib/OraInstaller.jar:/oracle/orcl/10.2.2/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /oracle/orcl/10.2.2 /orahnam OraDb10g_home1 /instype custom /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /oracle/orcl/10.2.2/network/install/netca_typ.rsp
    etected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0x328B33
    Function=index+0x63
    Library=/lib/libc.so.6
    Current Java thread:
         at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
         at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
         at oracle.net.ca.InitialSetup.<init>(Unknown Source)
         at oracle.net.ca.NetCA.main(Unknown Source)
    Dynamic libraries:
    001ac000-00200000 r-xp 00000000 fd:00 1019071 /usr/lib/libXt.so.6.0.0
    00200000-00204000 rwxp 00054000 fd:00 1019071 /usr/lib/libXt.so.6.0.0
    0029b000-002b5000 r-xp 00000000 fd:00 262157 /lib/ld-2.5.so
    002b5000-002b6000 r-xp 00019000 fd:00 262157 /lib/ld-2.5.so
    002b6000-002b7000 rwxp 0001a000 fd:00 262157 /lib/ld-2.5.so
    002b9000-003f8000 r-xp 00000000 fd:00 260625 /lib/libc-2.5.so
    003f8000-003f9000 ---p 0013f000 fd:00 260625 /lib/libc-2.5.so
    003f9000-003fb000 r-xp 0013f000 fd:00 260625 /lib/libc-2.5.so
    003fb000-003fc000 rwxp 00141000 fd:00 260625 /lib/libc-2.5.so
    00401000-00403000 r-xp 00000000 fd:00 260640 /lib/libdl-2.5.so
    00403000-00404000 r-xp 00001000 fd:00 260640 /lib/libdl-2.5.so
    00404000-00405000 rwxp 00002000 fd:00 260640 /lib/libdl-2.5.so
    00407000-0041b000 r-xp 00000000 fd:00 260687 /lib/libpthread-2.5.so
    0041b000-0041c000 r-xp 00013000 fd:00 260687 /lib/libpthread-2.5.so
    0041c000-0041d000 rwxp 00014000 fd:00 260687 /lib/libpthread-2.5.so
    00421000-00446000 r-xp 00000000 fd:00 260632 /lib/libm-2.5.so
    00446000-00447000 r-xp 00024000 fd:00 260632 /lib/libm-2.5.so
    00447000-00448000 rwxp 00025000 fd:00 260632 /lib/libm-2.5.so
    00520000-00525000 r-xp 00000000 fd:00 1019174 /usr/lib/libXdmcp.so.6.0.0
    00525000-00526000 rwxp 00004000 fd:00 1019174 /usr/lib/libXdmcp.so.6.0.0
    00528000-00627000 r-xp 00000000 fd:00 1020054 /usr/lib/libX11.so.6.2.0
    00627000-0062b000 rwxp 000ff000 fd:00 1020054 /usr/lib/libX11.so.6.2.0
    0062d000-0063c000 r-xp 00000000 fd:00 1020412 /usr/lib/libXext.so.6.4.0
    0063c000-0063d000 rwxp 0000e000 fd:00 1020412 /usr/lib/libXext.so.6.4.0
    00653000-00655000 r-xp 00000000 fd:00 1019079 /usr/lib/libXau.so.6.0.0
    00655000-00656000 rwxp 00001000 fd:00 1019079 /usr/lib/libXau.so.6.0.0
    0065f000-0066e000 r-xp 00000000 fd:00 260689 /lib/libresolv-2.5.so
    0066e000-0066f000 r-xp 0000e000 fd:00 260689 /lib/libresolv-2.5.so
    0066f000-00670000 rwxp 0000f000 fd:00 260689 /lib/libresolv-2.5.so
    00674000-00687000 r-xp 00000000 fd:00 262140 /lib/libnsl-2.5.so
    00687000-00688000 r-xp 00012000 fd:00 262140 /lib/libnsl-2.5.so
    00688000-00689000 rwxp 00013000 fd:00 262140 /lib/libnsl-2.5.so
    007e6000-007fd000 r-xp 00000000 fd:00 1021459 /usr/lib/libICE.so.6.3.0
    007fd000-007fe000 rwxp 00016000 fd:00 1021459 /usr/lib/libICE.so.6.3.0
    00802000-0080a000 r-xp 00000000 fd:00 1017973 /usr/lib/libSM.so.6.0.0
    0080a000-0080b000 rwxp 00007000 fd:00 1017973 /usr/lib/libSM.so.6.0.0
    00bfd000-00c02000 r-xp 00000000 fd:00 1039163 /usr/lib/libXtst.so.6.1.0
    00c02000-00c03000 rwxp 00004000 fd:00 1039163 /usr/lib/libXtst.so.6.1.0
    08048000-08056000 r-xp 00000000 fd:00 859779 /oracle/orcl/10.2.2/jdk/jre/bin/java
    08056000-08059000 rwxp 0000d000 fd:00 859779 /oracle/orcl/10.2.2/jdk/jre/bin/java
    08d36000-090fe000 rwxp 08d36000 00:00 0 [heap]
    e91ec000-e93c8000 r-xp 00000000 fd:00 853448 /oracle/orcl/10.2.2/lib32/libnnz10.so
    e93c8000-e93ee000 rwxp 001dc000 fd:00 853448 /oracle/orcl/10.2.2/lib32/libnnz10.so
    e93f0000-ea11d000 r-xp 00000000 fd:00 853494 /oracle/orcl/10.2.2/lib32/libclntsh.so.10.1
    ea11d000-ea17e000 rwxp 00d2c000 fd:00 853494 /oracle/orcl/10.2.2/lib32/libclntsh.so.10.1
    ea192000-ea1a7000 r-xp 00000000 fd:00 853447 /oracle/orcl/10.2.2/lib32/libnjni10.so
    ea1a7000-ea1ab000 rwxp 00014000 fd:00 853447 /oracle/orcl/10.2.2/lib32/libnjni10.so
    ea1ab000-ea2d3000 r-xs 00000000 fd:00 854667 /oracle/orcl/10.2.2/lib/xmlparserv2.jar
    ea2d3000-ea2da000 r-xp 00000000 fd:00 1040401 /usr/lib/libXp.so.6.2.0
    ea2da000-ea2db000 rwxp 00006000 fd:00 1040401 /usr/lib/libXp.so.6.2.0
    ea2e5000-ea2e9000 r-xp 00000000 fd:00 260646 /lib/libnss_dns-2.5.so
    ea2e9000-ea2ea000 r-xp 00003000 fd:00 260646 /lib/libnss_dns-2.5.so
    ea2ea000-ea2eb000 rwxp 00004000 fd:00 260646 /lib/libnss_dns-2.5.so
    ea2eb000-ea2f8000 r-xp 00000000 fd:00 853534 /oracle/orcl/10.2.2/lib32/libldapjclnt10.so
    ea2f8000-ea2fa000 rwxp 0000c000 fd:00 853534 /oracle/orcl/10.2.2/lib32/libldapjclnt10.so
    ea2fa000-ea34d000 r-xp 00000000 fd:00 859725 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libmlib_image.so
    ea34d000-ea34e000 rwxp 00052000 fd:00 859725 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libmlib_image.so
    ea34e000-ea61f000 r-xp 00000000 fd:00 859708 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libawt.so
    ea61f000-ea635000 rwxp 002d0000 fd:00 859708 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libawt.so
    ea65a000-ea9f7000 r-xs 00000000 fd:00 857725 /oracle/orcl/10.2.2/oui/jlib/OraInstaller.jar
    ea9f7000-eaa3c000 r-xs 00000000 fd:00 851758 /oracle/orcl/10.2.2/ldap/oidadmin/dasnls.jar
    eaa3c000-eaa48000 r-xs 00000000 fd:00 852084 /oracle/orcl/10.2.2/jlib/jssl-1_1.jar
    eaa48000-eaae0000 r-xs 00000000 fd:00 853008 /oracle/orcl/10.2.2/jlib/ldapjclnt10.jar
    eaae0000-eaba7000 r-xs 00000000 fd:00 851920 /oracle/orcl/10.2.2/jlib/srvm.jar
    eaba7000-eabb5000 r-xs 00000000 fd:00 851922 /oracle/orcl/10.2.2/jlib/srvmhas.jar
    eabb5000-eabc3000 r-xs 00000000 fd:00 855444 /oracle/orcl/10.2.2/jlib/share.jar
    eabc3000-eac78000 r-xs 00000000 fd:00 855084 /oracle/orcl/10.2.2/jlib/oracle_ice.jar
    eac78000-eae1f000 r-xs 00000000 fd:00 855082 /oracle/orcl/10.2.2/jlib/jewt4.jar
    eae1f000-eae84000 r-xs 00000000 fd:00 854650 /oracle/orcl/10.2.2/jlib/help4.jar
    eae84000-eaeb6000 r-xs 00000000 fd:00 851592 /oracle/orcl/10.2.2/network/jlib/netca.jar
    eaeb6000-eaedc000 r-xs 00000000 fd:00 851593 /oracle/orcl/10.2.2/network/jlib/netcam.jar
    eaedc000-eaf25000 r-xs 00000000 fd:00 855286 /oracle/orcl/10.2.2/jlib/netcfg.jar
    eaf25000-eaf33000 r-xs 00000000 fd:00 851669 /oracle/orcl/10.2.2/jlib/ewtcompat-3_3_15.jar
    eaf33000-eb1b8000 r-xs 00000000 fd:00 855086 /oracle/orcl/10.2.2/jlib/ewt3.jar
    eb1b8000-eb1c5000 r-xs 00000000 fd:00 859697 /oracle/orcl/10.2.2/jdk/jre/lib/ext/ldapsec.jar
    eb1c5000-eb1c8000 r-xs 00000000 fd:00 859881 /oracle/orcl/10.2.2/jdk/jre/lib/ext/smtp.jar
    eb1c8000-eb1e4000 r-xs 00000000 fd:00 859699 /oracle/orcl/10.2.2/jdk/jre/lib/ext/sunjce_provider.jar
    eb1e4000-eb2a0000 r-xs 00000000 fd:00 859698 /oracle/orcl/10.2.2/jdk/jre/lib/ext/localedata.jar
    eb2a0000-eb2e5000 r-xs 00000000 fd:00 859879 /oracle/orcl/10.2.2/jdk/jre/lib/ext/mail.jar
    eb2e5000-eb30b000 r-xs 00000000 fd:00 859880 /oracle/orcl/10.2.2/jdk/jre/lib/ext/mailapi.jar
    eb30b000-eb319000 r-xs 00000000 fd:00 859882 /oracle/orcl/10.2.2/jdk/jre/lib/ext/activation.jar
    eb51d000-eb71d000 r-xp 00000000 fd:00 1014149 /usr/lib/locale/locale-archive
    f59c8000-f5f68000 r-xs 00000000 fd:00 859244 /oracle/orcl/10.2.2/jdk/jre/lib/charsets.jar
    f5f68000-f5f79000 r-xs 00000000 fd:00 859282 /oracle/orcl/10.2.2/jdk/jre/lib/jce.jar
    f5f79000-f6056000 r-xs 00000000 fd:00 859283 /oracle/orcl/10.2.2/jdk/jre/lib/jsse.jar
    f6056000-f606c000 r-xs 00000000 fd:00 859291 /oracle/orcl/10.2.2/jdk/jre/lib/sunrsasign.jar
    f60b6000-f7a61000 r-xs 00000000 fd:00 859290 /oracle/o
    rcl/10.2.2/jdk/jre/lib/rt.jar
    f7a61000-f7a75000 r-xp 00000000 fd:00 859731 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libzip.so
    f7a75000-f7a78000 rwxp 00013000 fd:00 859731 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libzip.so
    f7a78000-f7a98000 r-xp 00000000 fd:00 859716 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libjava.so
    f7a98000-f7a9a000 rwxp 0001f000 fd:00 859716 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libjava.so
    f7a9a000-f7aaa000 r-xp 00000000 fd:00 859730 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libverify.so
    f7aaa000-f7aac000 rwxp 0000f000 fd:00 859730 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libverify.so
    f7aac000-f7eb2000 r-xp 00000000 fd:00 859737 /oracle/orcl/10.2.2/jdk/jre/lib/i386/client/libjvm.so
    f7eb2000-f7ecd000 rwxp 00405000 fd:00 859737 /oracle/orcl/10.2.2/jdk/jre/lib/i386/client/libjvm.so
    f7ee2000-f7ee5000 r-xs 00000000 fd:00 859696 /oracle/orcl/10.2.2/jdk/jre/lib/ext/dnsns.jar
    f7ee5000-f7ee8000 r-xs 00000000 fd:00 859878 /oracle/orcl/10.2.2/jdk/jre/lib/ext/jta.jar
    f7ee8000-f7eec000 rwxs 00000000 fd:00 9935681 /tmp/hsperfdata_oracle/22803
    f7eec000-f7ef5000 r-xp 00000000 fd:00 260648 /lib/libnss_files-2.5.so
    f7ef5000-f7ef6000 r-xp 00008000 fd:00 260648 /lib/libnss_files-2.5.so
    f7ef6000-f7ef7000 rwxp 00009000 fd:00 260648 /lib/libnss_files-2.5.so
    f7ef7000-f7eff000 r-xp 00000000 fd:00 859738 /oracle/orcl/10.2.2/jdk/jre/lib/i386/native_threads/libhpi.so
    f7eff000-f7f00000 rwxp 00007000 fd:00 859738 /oracle/orcl/10.2.2/jdk/jre/lib/i386/native_threads/libhpi.so
    ff98a000-ff99f000 rwxp 7ffffffea000 00:00 0 [stack]
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 312K [0xeb920000, 0xeb9c0000, 0xebe00000)
    eden space 512K, 48% used [0xeb920000, 0xeb95e2c8, 0xeb9a0000)
    from space 64K, 100% used [0xeb9b0000, 0xeb9c0000, 0xeb9c0000)
    to space 64K, 0% used [0xeb9a0000, 0xeb9a0000, 0xeb9b0000)
    tenured generation total 1408K, used 493K [0xebe00000, 0xebf60000, 0xef920000)
    the space 1408K, 35% used [0xebe00000, 0xebe7b618, 0xebe7b800, 0xebf60000)
    compacting perm gen total 4096K, used 3566K [0xef920000, 0xefd20000, 0xf3920000)
    the space 4096K, 87% used [0xef920000, 0xefc9b928, 0xefc9ba00, 0xefd20000)
    Local Time = Thu Jul 21 07:04:51 2011
    Elapsed Time = 0
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    # An error report file has been saved as hs_err_pid22803.log.
    # Please refer to the file for further information.
    Command = /oracle/orcl/10.2.2/jdk/jre//bin/java has failed
    INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
    *** Starting OUICA ***
    Oracle Home set to /oracle/orcl/10.2.2
    Configuration directory is set to /oracle/orcl/10.2.2/cfgtoollogs. All xml files under the directory will be processed
    INFO: The "/oracle/orcl/10.2.2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK

    Check the /etc/hosts and make sure the correct hostname is setup. Make sure DNS is setup (check the resolv.conf)
    Ex.
    cat /etc/resolv.conf
    Test using ping
    From your post (So it errors when it tries to get the domain name)
    at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)Retry operation.
    Best Regards
    mseberg
    Edited by: mseberg on Jul 21, 2011 7:39 AM

Maybe you are looking for