Oracle Portal export Transport Set

Hye Oracle Portal Guru's
I'm using Oracle Portal Version: 10.1.4.2.0 (Build: 197) in Solaris 5.9
may i know, is it we need to do export a transport set every time we want to do a backup of page group.
i.e i have a Page Group: My Page. Need i to export the transport set every time want to do a backup my page group.
Is there any automated way to do backup my page group using like scheduler or somethings.
Thanks,
Rao

There is a good note about this on the [url http://support.oracle.com]My Oracle Support website :
Note 738449.1 - How To Create A Page Group Transport Set With Command Line Tools?
Thanks,
EJ

Similar Messages

Web clipping proxy error oracle.portal.wcs.transport.http.HttpTransportException WCS-519

When I am trying to change the url it is coming following error .
An exception has occurred : oracle.portal.wcs.transport.http.HttpTransportException WCS-519 -- HTTP Proxy Authentication failed for int.domain.co.in:8080 with authentication of type "Basic" at realm "realm1". Update your proxy login information in the Edit Defaults / Personalize page to
authenticate.
Can anybody please help me regarding this issue it is very urgent.so please

I have a similar setup on Linux boxes (MT and Infra) and having the same problem. I can add external application, also able to register Web clipping provider successfully using the external application ID.
But when I try to clip the external application. It shows me on the page "User authentication failed. Please use the following link to update the information."
And, The application.log shows in addition to WCS-514 error code 404
Raising SOAP fault code: AuthenticationFailure
I get provider Test page without any error. http://xyz.abc.com:7778/portalTools/webClipping/providers/webClipping
Your help is highly appreciated.
Thanks,
-Dhiren Desai
[email protected]

Oracle.portal.wcs.transport.http.HttpTransportException WCS-514 WebClipping

Hi!,
I have Mid Tier installed on one of the Linux box and Infrastructure installed on a separate Linux box. Both of these boxes are behind firewall. I have successfully compeleted portal configuration for Reverse Proxy. I can access portal via internet. Users don't have to put port numbers (7777 or 7778) to access the portal. Users just enters http://www.abc.com, which takes them to portal builder page.
However, Both of my Web providers are not working. As described by the document to configure seeded provider. I changed to port in the URL from 80 to 777. http://www.abc.com:7777/portalTools/webClipping/providers/webClipping. I can access these two web provider applications from the internet, with both the ports 80 as well as 7777. I also edited the provider.xml to use proxy.
When I try to personalize web clipping portlet. and provide URL Location. It is giving me following error.
An exception has occurred : oracle.portal.wcs.transport.http.HttpTransportException WCS-514 -- Get status code 400 to URL http://www.xyz.com by method get
It seems to me I may be missing one of the configuration step, don't know which?
I appreciate your help in advance.
Thanks

I have a similar setup on Linux boxes (MT and Infra) and having the same problem. I can add external application, also able to register Web clipping provider successfully using the external application ID.
But when I try to clip the external application. It shows me on the page "User authentication failed. Please use the following link to update the information."
And, The application.log shows in addition to WCS-514 error code 404
Raising SOAP fault code: AuthenticationFailure
I get provider Test page without any error. http://xyz.abc.com:7778/portalTools/webClipping/providers/webClipping
Your help is highly appreciated.
Thanks,
-Dhiren Desai
[email protected]

Automatic export of transport sets

Hi,
i want to export all pages as transport sets.
is there a way to create a job, script or something that would export transport sets for every page in portal automatically.. the portal is growing and thats make impossible to export every page, it takes time.

Creating pages all under one page group stricts search capabilities, because there isnt any option for searching pages (not page groups) in custom search portlets with results automatically displayed. (users can select page to search only)

Moving Transport Set from 9.0.4 to 10.1.2.0.0 environment

Hi,
I am moving transport set from 9.0.4 environment to 10.1.2.0.0 environment.
But when I import it on 10.1.2.0.0 environment I get the compatibility error,
I am using imp.sh to import. Following error occurs when I try to import:
Checking for Portal Version Compatibility...
Error: Source and Target Portals are of different versions
Cannot proceed with Import
Could any one let me know, Is there any way to move the transport set from old version to the new one. Apart from upgrading the old one.
-Santosh

Santosh,
No, sorry but there isn't a supported way of doing this.
Oracle Portal only allows you to use the Portal Export / Import between the same level of patching. Trying possible workarounds will lead you in an unsupported state.
The only way as you've said is to upgrade your older version to the same level of the newly installed version, ie, bring your 9.0.4 to 10.1.2.0.x.
Metalink Note:263995.1 - Master Note for OracleAS Portal Export / Import Issues may help you.
I hope it helps...
Cheers,
Pedro.

Portal Export and Import Steps

Hi all,
I need to export all page groups from Production portal instance and import those in brand new portal instance (target Portal)*. Source and target portal instance is as follows
Production Oracle Database Version: 10.1.0.5
Target Oracle Database Version: 10.2.0.4
Production Oracle Infrastructure Version : 10.1.2.0.2
Target Oracle Infrastructure Version: 10.1.2.0.2
Production Portal Version: 10.1.2.0.2
Target Portal Version: 10.1.2.0.2
What i have done till now is as follows
1. Install Database server 10.2.0.1
2. Upgrade Database Server to 10.2.0.4
3. Install 10.2.0.1 products from Companion CD (ultra search Schemas)
4. Create Metadata Repository using Repository Creation assistance
5. Install IAS infrastructure (10.1.2.0.2)
6. Install IAS Middle Tier (10.1.2.02.)
7. Create Transport sets in production instance
Please tell me what i am supposed to do now.
I am following below link for reference but not able to follow all
http://www.scott-tiger.dk/portalHelp2/ohw/state?navSetId=_&navId=0
Regards
Anindya

For Portal Export Import (transport), the following are the foremost links on Metalink/ My Oracle Support.
Note 306785.1 Overview of the Portal Export-Import Process
Note 263995.1 - Master Note for OracleAS Portal Export / Import Issues
Note 333867.1 Portal Export and Import Utility Supportability Scenarios
Regarding your question, please do go through all of these notes.
- Overview will tell you how to prepare your instances/environments for portal transport. you will see how to ensure they are ready, and that some patches are needed.
- Master note will tell you which patches are needed, how to get them, what are the diagnostic tools which can help you check and clean your portal repositories, and what common errors you may get and how to fix them.
- Supportability Scenario tells you what actually you can transport and what you cannot. i.e., what is supported and what is not. Do read it for your case.
I have seen several Portal Admins who keep banging their heads with problems they create in their systems because they do not read this note and try to force a case which does not follow a supportable scenario.
hope that helps!
AMN

Where can i find the Oracle Portal 3.0 Casebook?

Where can i find the Oracle Portal 3.0 Casebook mentioned in the Oracle portal online help?
The following is the text copied from Oralce online help:
Opening sample applications
Oracle Portal provides a set of sample applications and components. Instructions for building some of these applications are provided in the Oracle Portal 3.0 Casebook. Other examples are included to showcase Oracle Portal's robust application building features.

Hi
The case book (full title: Building Advanced Portals Instructions) and its zip files for the exercises are located at
http://portalstudio.oracle.com.
(http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=40679&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0)
Hope that it is helpful.
Cheryl

Portal Transport Set(EXPORT) script not running.

Hi,
I have created a Instant portal(10 Appli Rel 2) which is on OS
[SUSE LINUX Enterprise Server 9 (i586) VERSION = 9 ] .
Now I want to create transport set and want to export that instant portal to another
SUSE LINUX server.
But the problem I am facing is that the script that is generating by the EXPORT WIZARD is
for UNIX which has .CSH extension.
So i am not able to rum that thing...as Linux use .SH .....can anyone help me to run that thing .......
Thanx

DId you run the script to put the trasnport set ready for been include?
When you create a transport set, automaticaly you can get the dmp from it, but when you import it, you need to run the script that willmake a import in db level so you can import it in the portal, is like making two imports, one at portal, one at command line using the script, and you run it like script.cmd -mode import -s portalschema -c orcl -pu orcladmin -d filename.dmp where -mode indicate that is going to be an import, -c db SID name, -pu Portal User -d File created during export and -s db schema for portal.
Hope this helps.
Greetings

Import stops with 'Transport set created, exported, and submitted...'

Hi,
I'm using Oracle Portal 10.1.4, and I've successfully imported page groups into this portal before, but now when I try to do an import, I only see the following message in the 'Browse Transport Sets' page:
Import: Transport set created, exported, and submitted to background process for import.
This is true for new page groups and for page groups that should be replaced. Any ideas?
What is the background process? How do I get it started, if it has failed? How can I remove the transport set that is in this 'Import' status. Any help appreciated.
Thanks,
J.

Hi J,
For me if this is happening is cause problably something hang on your side while doing the Portal Export / Import. Not sure how it happened but I've seen this happening for other persons. The easiest way is to clean up the Portal Transport Set tables. Upload the DMP to the Portal again and attempt to merge it again.
There is an out dated Note in the Metalink for this, but I'd basically submit a Service Request as Oracle Support may better help you on this matter and eventually update the old Note -- Note:177597.1 - How to clean up the Oracle Portal Transport Tables.
I hope it helps...
Cheers,
Pedro.

Unable to set session in Oracle Portal useing reverse proxy

I have deployed a reverse proxy (using Oracle HTTP Server) in front of a Oracle Portal Install (version 10.1.2.0.2). The steps followed to set this up came from the following documents:
Steps mentioned in Section 9.2 Configuring a Reverse Proxy for OracleAS Portal and OracleAS Single Sign-On for a reverse proxy on a Oracle HTTP Server.
http://download-west.oracle.com/docs/cd/B14099_15/core.1012/b13998/variants.htm#ASTED005
Also performed steps mentioned in -> Section 5.3.7 - Step 7: Enable Session Binding on OracleAS Web Cache of the Oracle® Application Server Portal Configuration Guide 10g Release 2 (10.1.2) -- B14037-03.
My current (example names shown only)setup details are as follows:
Reverse Proxy for SSO server (running on internal.oracle.com:7777): proxy.oracle.com:7777
Reverse Proxy for Portal server (running on internal.oracle.com:7778): proxy.oracle.com:7778
With the above steps completed, I can successfully use the http://proxy.oracle.com:7777/pls/orasso for login into SSO without any issues.
Users get authenticated successfully.
I can also use http://proxy.oracle.com:7778/pls/portal for viewing pages on the portal fine . All self referencing links have also been successfully modified to point to proxy.oracle.com:7778.
However, an attempt to login in the portal is not successful. Clicking on the 'Login' link successfully redirects to the SSO login page (http://proxy.oracle.com:7777/<login-page>). However, after successful authentication, the success page fails to show up and the user gets shown the initial login portal home page again.
There are no error messages shown on the screen.But it seems that user session is failing to be initiated/set correctly, as shown by the log file (in $PORTAL_ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log ):
06/11/21 16:49:31 portal: [module=RepositoryServlet, ecid=83928411196,1] Repository Gateway: LWUser: PUBLIC, Cookie: oracle.uix=0^^GMT+10:00;
portal=9.0.3+en-au+us+AUSTRALIA+22BC75924EEAD8A2E040007F010019F7+8DAC5E3559C95F5E0090A6F56FFA58192CB0F437CA57A9102A6394F1EB7FAB5DEE3BFA12C65
91C0C009B6......
06/11/21 16:49:31 portal: [module=RepositoryServlet, ecid=83928411196,1] ERROR: Repository Gateway error: Database Error: ORA=20001 ORA-20001:
Unable to obtain session information from the cookie. Please close your browser and reconnect.
ORA-06512: at "PORTAL.WPG_SESSION", line 149
ORA-06512: at line 22
Any help with this will be appreciated.
Thanks.

Hi Chris,
The begin of the expection stack gives you the reason:
06/11/03 09:13:59 java.sql.SQLException: The method 'setSavepoint' cant be called when a global transaction is active
The reason is, that either the whole global transaction must be commited or rollbacked.
I don't know your actual configuration, but between the methods begin() and commit()/rollback() of the UserTransaction instance, OC4J/OracleAS uses a global transaction (= XA transaction) in your configuration. The state of a global transactions is completely under the control of the application server and several restrictions must be considered. One of them is, that you can't use the method setSavePoint/. E.g. you can't also call the method setAutoCommit(true) in this state, or change the transaction isolation level via setTransactionIsolation(newLevel).
This is NOT a limitation of the OC4J/OracleAS but is true for ALL application servers.
P.S. I can successfully set savepoints and rollback to savepoints in weblogic 9.0This means, that WebLogic 9.0 doesn't use a global transaction in this case.
Because I don't know your configurations (Oracle and WebLogic) I can't say, why the behave different in this situation.
Best,
Manfred

How to set JVM system properties in Oracle Portal ??

Hello Guys,
I want to set javax.net.ssl.trustStore="path to keystore" ,JVM system properties on oracle portal,
Like i want to configure my keystore with oracle portal so that my application can make a success full connection with back end using https.
i read the following note from one of the Oracle tech note,which says that
It is important that this system property is passed as a command line option to Oracle Application Server Containers for J2EE (OC4J). Setting the property in oc4j.properties will not help because the system property is read first before OC4J reads this file. Therefore, it is best to modify the <java-option> line in the OC4J_portal section of ORACLE_HOME/opmn/conf/opmn.xml.
So, i made the required changes to OC4J_portal section of opmn.xml file as below
added value is shown in bold
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\OraPortal\j2ee\OC4J_Portal\config\java2.policy -Djava.awt.headless=true -Xmx256m -Djavax.net.ssl.trustStrore=C:\keystore1 -Djavax.net.ssl.trustStrorePassword=password1"/>
Even after making these changes, my application not able to make connection using https.
Could u guys explain me, what things are going wrong or somethings else i need to do to make it work.
Any thoughts would be highly appreciated.
Thanks
<Neeraj Sidhaye/>
http://ExtremePortal.blog.co.uk

Hello Guys,
I want to set javax.net.ssl.trustStore="path to
keystore" ,JVM system properties on oracle
portal,
-Xmx256m -Djavax.net.ssl.trustStrore=C:\keystore1
-Djavax.net.ssl.trustStrorePassword=password1"/>Hi,
if the above is an exact copy of the values you inserted then it looks like you have two typos in the command line parameters.
-Djavax.net.ssl.trustStrore -> trustStore
-Djavax.net.ssl.trustStrorePassword -> trustStorePassword

How to export result set from mysql query browser to .sql in oracle

Hi folks:
I was trying to export result set from MySql query browser to Oracle. I could able to do
File->Export Result Set-> Excel format...
What I am trying to get is .sql file so that I can run it as a script in my oracle db. Is there any way we can get .sql file with inserts and delimeters ....?
Did you guys get my question.?
Please throw some light on this....
Could be very appreciable ....
Thanks
Sudhir Naidu

Hi
Create a sql statement which generates the insert statements.
Something like this:
select 'insert into table1 (column1, column2, column3) values (' ||
column1 || ', ' || column2 || ', ' || column3 || ');' from table 1;
The || sign is the string concatenation sign in Oracle, replace it the appropriate sign in MySql. Export the result set of this query into a file, and you can run it in a SqlPlus.
Ott Karesz
http://www.trendo-kft.hu

Set User preferences in oracle portals database in portal environment

Hi All,
I need to set User preferences in oracle portals database in portal environment.
I need to get some oracle PL/SQL API for the said purpose.
In user preferences I need to save Preference name and preference value.
Can any one have idea?
Regards
Amit Tiwari

http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/index.html
and http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwpre_api_name.html
Patrick.

How to Set a page as home page in Oracle portal 10g

Hi,
I have one doubt.
How to set a page (Not Page group) as home page in Oracle portal 10g?
whether it should be a HTML Portlet or some other?
Thanks & Regards
Suthan.Sathya

Hi,
Welcome to SDN
By defining the Sort Sequence of Navigation Nodes, you can do this, check the links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/89503ede925441e10000000a114084/frameset.htm
If you need more help, just ping back.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Oracle Portal master details default value set up.

Hi All,
Using Oracle Portal to create a master details form.
I have tried to set up the details table foreign key. I used the master table primary key as a default value for the details table foreign key.
Does anyone know what the correct syntax is when I fill in the Default Value field on the "Formatting and Validation Options for Detail Row" tab?
Also related to this: What should I choose from the drop down menu for the "Default Value Type"?
Best Regards.
Liviu Minda & Paul Williams
Cape Town City Council.

Hi Liviu & Paul,
NOTE: The following is applicable to Portal version 3.0.8 and above .
Well, if you want that the Detail table Foreign key should get the value of The Mater Table Primary key, then you need not do anything like setting the Default value for the Foreign Key of the Detail section. It works like this :-
Operation INSERT:
When you are INSERTing a master record and the corresponding detail records, just fill up the master form and need not worry about the Foreign key(FK) in the Detail rows. Fill up the other columns for the detail rows and choose the appropriate action for each of the detail rows i.e. INSERT and click on the SAVE button. If the FK in the Detail have been left blank, then while inserting into the detail table, the Primary Key (PK) value of the master will be picked up and inserted . However, if you specify any value in the FK column of the Detail, then the specified value would override the PK value of the master.
Generally, what ppl do is make the FK in the detail of type Hidden.. so users cannot tamper with the FK values.
Hope this helps.
null

Oracle Portal export Transport Set

Similar Messages

Maybe you are looking for