Oracle portal forms, links, reports relation table

I have an oracle portal form.this is has been used by portal Link and this link has been used in portal report.
Present I know only portal Form name but no idea about which link uses and which report uses this link..
Is there any way I can find out the portal links and reports names based on form name which I know..Please help me with this..
I am under impression that, there may be some portal system table/view which will have dependcies of all the forms ,links and reports information...
Please let me know system table name.I couldn't search in metalink since I don't have access
Thx
Lakshmi.V

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

Similar Messages

How can I uninstall a damaged installation of Fusion - PFRD 11.1.1.6.0 - Oracle Portal, Forms, Reports and Discoverer

Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
Mathias

Hey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga

Install and config issues with Oracle Portal, Forms, Reports and Discoverer

For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
     ... 18 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem?

Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7

Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 64bit
Oracle db 11g (64bit)
Oracle Weblogic 1033 (wls1033_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64/ofm_pfrd_win_11.1.1.3.0_64)
Configure Components Screen:I just choose the Oracle Forms/reports Oracle Forms/reports builder Enterprise Manager Oracle Web Cache .
Configure Ports Screen:Auto Port Configuration.
Specify Proxy Details Screen:No
Specify Application OID Screen:NO
But when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain". No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dll

Since your weblogic is on version 10.3.3, you can only succesfully configure your fusion middleware when you are on version 11.1.1.3.
So (1) restart the install of fusion middleware 11.1.1.2, (2) choose install type INSTALL ONLY, (3) start installation of fusion middleware 11.1.1.3 and finally (4) configure fusion middleware using AS_ORACLE_HOME\bin\config.bat

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Help in Installing Oracle Portal,Forms,Reports and Discoverer(11.1.1.2.0)

Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.

You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

ORACLE EXPRESS: build a page with multiple forms linked to one table

hi,
im using oravle application express. APEX
i would like to build a page with multiple forms linked to one table (orders) , the page has 4 from each one with different order_id number (depending on filtering), and if the order is prepared click yes for each order and this 'YES' should be UPDATED AND SAVED to each order number in the same table with the press of one button.
i created all the form as (sql query)
and create one update process
(UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_1
WHERE ORDER_ID =:P10_ORDER_ID_1;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_2
WHERE ORDER_ID =:P10_ORDER_ID_2;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_3
WHERE ORDER_ID =:P10_ORDER_ID_3;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_4
WHERE ORDER_ID =:P10_ORDER_ID_4;
i dont know really if i can do that, but it appear hat it actually saving according to order_id number , but not all the time some time it saved the value as "null".
please guide me what is the correct way to do this.
I READ THIS ONE
http://stackoverflow.com/questions/7877396/apex-creating-a-page-with-multiple-forms-linked-to-multiple-related-tables
BUT IT WAS FOR MULTIPLE INSERT
thanks.

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

Oracle Portal,Forms,Reports and Discoverer 11G

Good evening
I installed the following products
* Oracle Database(to the 1st computer)
* Repository Creation Utility
* WebLogic Server(to the 2nd computer)
* Oracle Portal,Forms,Reports and Discoverer 11G(to the 2nd computer) – during installation I chose forms and reports
Identity Management and SSO are not installed, why they are used for?
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

Step by step installation of Oracle Portal, Forms, Reports and Discoverer

Hi all
i m using Oracle Enterprise Linux 5. can any one plz tell me step by step installation of Oracle Portal, Forms, Reports and Discoverer?
i watched some tutorials but didnt find any thing. did i need any pre-installation for Oracle Portal, Forms, Reports and Discoverer on Linux?
Regards
Saqib

Dear Saqib Alam ,
Hope you are fine, and also you have completed the PORTAL installation successfully.
Can you kindly share me the methods you have went..
can you clearly explain us by this OTN, it will be a great Knowledge Sharing for Apps DBA like us.
1) what are the softwares we have to download for the Portal 11g
2) if possible Step by step installation method.
Thanks in advance,
Abdul Hameed

Installing Oracle 10g Forms and Reports in Cluster Mode

Dear All,
My OS version is RHEL 4
In our current setup we have oracle 10g database two node cluster and Application Server 10g to node cluster.
Currently our report server has been configured to run in standalone mode
I have been asked to configure oracle 10g forms and report server in cluster mode.
Please provide me with the documentation link to configure oracle 10g reports server in cluster mode.
Thanks and Regards
Monoj Das

my main goal is load balancing only
Then what I've done in 2007 might be what you need. In that thread there is a link to Web Cache Administrator's Guide : there you'll find everything you need to configure the web cache as a load balancer, particularly chapter 8 Setup and Configuration.
Anyway, here briefly some configurations : we have two machines, say MachineA and MachineB. The DNS resolves MachineA to a virtual address, which is normally assigned to MachineA; if MachineA crashes, it gets assigned to MachineB.
Users URL looks like this : http://MachineA:<port>/forms/frmservlet?config=<some config>
MachineA's web cache distributes connection requests between MachineA and MachineB.
Of course we're now using 11g as well, but that's another thing.

Weblogic-portal,forms and reports.

Hi,
we got a requirement as to built the reports. so we have tried toinstall the oracle reports 11g. As i am apps dba i am not much aware of the installation. Is FMW and WLS i is mandatory for the installing the oracle reports 11g.
We have configured RCU
We installed the weblogic administrator console. The console has came.
Now we are triying to install reports.
Is this the correct process............when tring to do this it is failing due to prerequisite.
Can any one tel the correct order of the installation along with the prerequisite.
Thanks in advance.

Hi as a starting point take a look at the documentation [url http://download.oracle.com/docs/cd/E21764_01/pfrd.htm]ORACLE PORTAL, FORMS, REPORTS, AND DISCOVERER DOCUMENTATION
Hope this helps
Regards
Jean-Yves

Default value of combobox using dynamic LOV in Oracle Portal form

We are trying to specify the deafult value of a combobox on a form that derives it options from a dynamic LOV. The option value is a number and the display is text.
E.g.
<Option value="1">Books
<Option value="2">CDs
We have tried various ways of setting the default option to be selected on the Combobox. First, we tried using a sql query to return a number from a table (sql query returns number -> in the default value type field). Next, we tried to use a constant number (default value: 2, default value type: constant). In neither case, did the Oracle Portal form pre-select our default choice in the drop-down list.
Any suggestions? I browsed the other forum articles on this topic and noticed several folks believed it was a bug in Portal. We are using Portal version 3.0.9 (latest App Server for the Ebusiness Suite). Thanks in advance.

You can manually add the select list (or for that matter anything else) to a wizard created form. If the select list is for an existing item, simply change the "Display As" setting from Text to a Select List based on the LOV you create. Any changes made will then be applied by the update process.
cheers,
Ron

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

When you run oracle portal forms why does it create...

When i run my oracle portal form..it creates a new name for the form? Why doe it do that?

With portal 902 (shipped along with iASv2) you have the option of editing the same component and not creating a new version each time you edit it.
I don't think forms is designed to create a new version of name each time it is run. Can you elaborate on the issue you are having and the version being used. O know..i edit the form..but when im doine editing it..it automatically creates an 'updated version"...which i understaned..but why can't i use the old version and update that? How do you do that?
becuase I'm having to delete all my old versions of my form which are like 100 versions.
Also the name of my form changes everytime i run the form. I added a javascript code that tells me the name of the form and it changes everytime I run the form (nit edit it)
I wrote: alert(form.name);
And everytime i ran the form it changes the name.

Oracle 11g Forms and Reports-download

I want to install oracle and forms to work with oracle 11g database.
can some one provide the download links. I checked with oracle fusion links and there is too much. Not sure which is the one to install. Thanks.

Well, what you need will depend on what you are doing and which Forms/Reports version you want. In general, "Forms" and "Reports" are no longer stand-alone products. They are integrated into Application Server (Fusion Middleware). So, you will end up installing more than just "Forms" or "Reports" no matter what you do. This is more true of Fusion Middleware 11. In version 10, the installation was a little lighter weight.
So, you can download Fusion Middleware 11 from here:
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Look for the download titled Portal, Forms, Reports and Discoverer (11.1.1.2.0) . The one labeled "11.1.1.3" is not a fully product, it is a patch for 11.1.1.2. Normally we would not put patches on OTN, but this was an exception. The FMw installation will also require WebLogic Server to be installed first. Refer to the installation guide for details. Links to all the documentation is on the top of the download page.
For version 10, you can download here:
http://www.oracle.com/technetwork/developer-tools/forms/downloads/index-092941.html

Oracle portal forms, links, reports relation table

Similar Messages

Maybe you are looking for