Oracle Portal help

Now!
after application server installtion,http://machine:port/pls/portal this page don't show.how I do?

Hello:
Did this problem get resolved? if yes, then how? I am also facing the same situation. I have AS10g(9.0.4) and all the compoenents are running. But cannot access the portal using /pls/portal
thanks
Suresh.

Similar Messages

Help in Installing Oracle Portal,Forms,Reports and Discoverer(11.1.1.2.0)

Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.

You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

Urgent!! Oracle Portal Schema Corrupt - Help!!

Hi
We have a new installation of Oracle Portal Release 2 (version 9.0.2).
The portal schema somehow got corrupt. We tried two different recompile scripts, and still, after running it several times, we end up with 86 invalid objects, all of them either a package or type body.
Does anyone know of a script that will allow us to recompile this from source code?
Regards
Harry

Hi,
try running this as portal schema ,it creates a file called c1.sql ,just run c1.sql to compile all invalid objects:
set head off
set echo off
spool c1.sql
Select 'Alter '||
decode(OBJECT_TYPE,'PACKAGE BODY','PACKAGE','TYPE BODY','TYPE',OBJECT_TYPE)||
' "'||OBJECT_NAME||'" COMPILE '||
decode(OBJECT_TYPE,'PACKAGE BODY','BODY;','TYPE BODY','BODY;',';')
From user_OBJECTS
Where STATUS = 'INVALID'
spool off
set echo on
set head on
Hope this helps,
Anu

Oracle Portal Migration - Help

Hi,
I am trying to migrate the oracle portal that is configured to use OID from development to testing environment and I don't know where to start.
Can anybody guide me where to start? There has been some development done and I want to replicate DEV to Test Env. I don't know what files need to be version controlled.
Any response will be appreciated.
Thanks,
-Ram

Hi,
I think, 9.0.4 did not have Cloning as the scripted cloning procedure you see in later versions. Cloning feature was introduced in Release 2 of 10g OAS. Please see the following link for description of new features in this release.
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/whatsnew.htm#sthref7
However, you can create multiple instances using export/import, or database procedures, and that is supported for portal 9.0.4 too. You can propagate your portal objects across other databases to create identical instances. that may also be used to create multiple clusters and then clone configurations using DCM.
Check this link for one such deployment.
10.2.2 Case 2: Deploying Identical Content Across Multiple Portal Instances
http://download.oracle.com/docs/cd/B10464_01/portal.904/b10356/cg_imex.htm#1009494
Also, please see the following note for a detailed procedure and some really helpful pointers.
Subject: Overview : How to "clone" a Portal Repository
Doc ID: 276620.1
here specially see the Cloning matrix.
AMN

URGENT HELP- Can't install Oracle Portal on Windows 2000

I am trying to install Oracle Portal as part of installation of Oracle 9iAS v1.0.2.2.2a on Windows 2000 and I get this message from the OPCA Installation Log:
STEP 8 : Installing WWV layer Components
INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=mercury)(PORT=1521)))(CONNECT_DATA=(SID=pdb))) @..\..\portal30\admin\plsql\wwv\wwvinst.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=mercury)(PORT=1521)))(CONNECT_DATA=(SID=pdb))) @..\..\portal30\admin\plsql\wwv\wwvinsty.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
ORA-00600: internal error code, arguments: [15456], [WWA_API_MODULE], [13],
Errors encountered in the Install process. Installation Aborted.
I am using an Oracle 8i database for the installation on the same machine. Can anyone help please?
Thanks,
-Ashok Manian

Thanks for the reply Rohini.
The SYS password is change_on_install and SYSTEM password is manager. It still causes the same problem. The database I am using is an Oracle 8i database which is automatically created while installing Oracle 9iAS.
I also tried to install Oracle Portal on an Oracle 9i Database on the same machine and this comes out with a different error. It tells me the SHARED_POOL_SIZE is less than 31457280 whereas as I checked through SQL*Plus its actually much more than that!
Can you please help?
Thanks,
-Ashok Manian

How do i export/import the Oracle Portal Online help

hai everybody...
i want to export/import the
Oracle Portal Online Help Content Area
i tried this same as (my own content area
export/import)...but my own content area Pages were worked.....how do i do this..
any help..
thanks in advance
null

The recommended way is to export the User Manager configuration template out (using the AdminUI), import it into your new enviroment (again using the AdminUI - you have to type the password of the LDAP user in since it is not exported) and then initiating an LDAP Synch.

OracleAS Portal 10g: Build Corporate Portals help!!!

Hi All,
I am looking for help on installation process and basic know how of "OracleAS Portal 10g: Build Corporate Portals". Our requirement is limited for internal websites only.
Would highly appreciate if someone can guide me through...
Thanks in advance!
Ameet Kumar
[email protected]

Hi All,
I am looking for help on installation process and basic know how of "OracleAS Portal 10g: Build Corporate Portals". Our requirement is limited for internal websites only.
Would highly appreciate if someone can guide me through...
Thanks in advance!
Ameet Kumar
[email protected]

HELP WITH SUBFOLDERS ACCESS IN ORACLE PORTAL....

Hi, all im a user of Oracle Portal and when I create a Folder called ROOT with access to group 1 and 2, y create subfolders C, and D, C and D has the same privileges than A and B, but if i add F, G,H,I,J,K,L,ETC, and before that I add a new group to ROOT CALLED 3, THE SUBFOLDERS DOESN'T inherit the same access than the root, they has only the access that was granted when I create that folder.
There is some way to recreate the access to all the subfolders once they was created without doing it folder per folder?.
Thank you very much!.
Gustavo

We implemented SSL for Windows NT and created our own install instructions that we gathered from various sources (a combination of the Oracle Portal Configuration Guide, tech notes from Metalink, and discussion forums from OTN). It was not a simple task for us.
Hope they help. I will send them to your email address since I xcan't figure out how to attach them here.
null

Need Help:Oracle Portal get LOB value

i'm new to use LOB data types, i don't know how to insert or select it. I'm using Oracle10G and Oracle Portal 9.0.4.
is anyone there can help me ?

Hi,
One other question.
The tns entry you posted looks like this -
*MOF_Test =
* (DESCRIPTION=*
* (ADDRESS=*
* (PROTOCOL=TCP)(HOST=10.62.108.84)(PORT=1521))*
* (CONNECT_DATA=*
* (SID=dg4odbc)*
* (HS=OK)*
Do the asterisks represent spaces or line ends ?
The format of the entry should be that the first line starts at the beginning of the line and there should be at least one space at the beginning of the other lines, so it should look like -
MOF_Test =
<space> (DESCRIPTION=
<space> (ADDRESS=
<space> (PROTOCOL=TCP)(HOST=10.62.108.84)(PORT=1521))
<space> (CONNECT_DATA=
<space> (SID=dg4odbc)
<space> )
<space> (HS=OK)
<space>)
Regards,
Mike

Images used inside the Portlets are not getting displayed on Oracle Portal

I am registering my JSR Portlet producer on Oracle Portal server but when its rendered on the portal page its not showing images.It just shows a red cross mark showing image is not loaded.Can anyone help me out please samt thing is happening with CSS also.Please reply soon

I'd check the image properties (right click the x and choose properties) and see what the path is for the image. If it is a relative path, you need to make sure that the file is in that location on the Application Server. /images/myImage.jpg would mean the file should be in $ORACLE_HOME/portal/images on the midtier.

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

Sample PL/SQL Portlet Source Code for Oracle Portal 9ias

Hi, I'm a newbie of Oracle Portal technology, and I have a problem:
I would create a PL/SQL portlet that realizes the following functions:
1) Retrieve the username of the portal user logged from WWCTX_API.GET_USER function.
2) Insert into an oracle db table two values about two hidden fields in the HTML FORM of the portlet.
3) Realize the insert commit through the click on the submit button on the Html form of the portlet. I would redirect by the same button to an other page url also.
I've never developed in Portal, and may be useful if someone could post me the source code of the SHOW MODE SECTION in the PROCEDURE SHOW of a SAMPLE PL/SQL PORTLET that realizes the upper functions.
Thanks a lot....

Hi
Here's the code from Helloworld_Portlet example:
procedure show
p_portlet_record wwpro_api_provider.portlet_runtime_record
is
l_portlet wwpro_api_provider.portlet_record;
begin
if (not is_runnable(
p_provider_id => p_portlet_record.provider_id
,p_reference_path => p_portlet_record.reference_path)
) then
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;
end if;
Retrieve the portlet information.
l_portlet := get_portlet_info(
p_provider_id => p_portlet_record.provider_id
,p_language => p_portlet_record.language
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
if (p_portlet_record.has_title_region) then
Draw the portlet header and specify what links are available
from that header (i.e. details, customize, help, and about).
The has_title property is set at the page region level.
wwui_api_portlet.draw_portlet_header
p_provider_id => p_portlet_record.provider_id
,p_portlet_id => p_portlet_record.portlet_id
,p_title => l_portlet.title
,p_has_details => true
,p_has_edit => true
,p_has_help => true
,p_has_about => true
,p_referencepath => p_portlet_record.reference_path
,p_back_url => p_portlet_record.page_url
end if;
Draw the portlet borders.
The has_border property is set at the page region level.
wwui_api_portlet.open_portlet(p_portlet_record.has_border);
Display the content of the portlet in the show mode.
Use the wwui_api_portlet.portlet_text() API when
generating the content of the portlet so that the
output uses the portlet CSS.
htp.p(wwui_api_portlet.portlet_text(
p_string => 'Hello World - Mode Show'
,p_level => 1
if (p_portlet_record.has_border) then
wwui_api_portlet.close_portlet;
end if;
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_ABOUT) then
Display the about page for the portlet.
htp.p('Hello World - Mode Show About');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT) then
Display the edit page for the portlet.
htp.p('Hello World - Mode Show Edit');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_HELP) then
Display the help page for the portlet.
htp.p('Hello World - Mode Show Help');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT_DEFAULTS) then
Display the edit defaults page for the portlet.
htp.p('Hello World - Mode Edit Defaults');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_DETAILS) then
Display the details page for the portlet.
htp.p('Hello World - Mode Show Details');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_PREVIEW) then
Display the preview page for the portlet.
htp.p('Hello World - Mode Show Preview');
end if;
end show;
I think you need to add this:
You can get the values of your html-form with this command:
v_hidden_1 varchar2(256);
v_hidden_2 varchar2(256);
v_hidden_1 := wwpro_api_parameters.get_value('name_of_hidden_1_in_html_form','p');
v_hidden_2 := wwpro_api_parameters.get_value('name_of_hidden_2_in_html_form','p');
You can get the actual URL with this command:
v_url := p_portlet_record.page_url;
Hope that helps.
Regards,
Mark

Problem running Oracle Portal to Go (Oracle9i 1.0.2.0.0)

I have installed Oracle9i Application Server WE 1.0.2.0.0 Standard Edition on Windows2000 Professional Edition. I am getting problems regarding running Portal to Go.
The installer said that installation was successful. Moreover I have done the configuration tasks mentioned Oracle9i installation guide under post installation steps for Oracle9i.
But Oracle Portal to Go is not running and returning error message. Are there some other tasks still to perform to configure the Oracle Portal to Go Standard Edition?
Here it is a brief Description of what I have done with the installations process
System: Pentium II 500 MHZ with 256 MB RAM and 15 GB Hard Disk so enough space available for installations.
Windows 2000 professional was freshly installed
All pre installation tasks are done like paging file size is 896MB
Important Installation steps and points are as under (Standard Edition of Oracle 9i Application Server 1.0.2.0.0):
I followed all the steps given in Oracle 9i AS installation guide
On Windows 2000 Installer never asks for reboot before actually installing the Oracle 9i application server (Chapter 4 of installation guide: preparing system for installation: step5: page 5 of 25). So I manually reboot the system
During installation when I reached Database Access Descriptor (DAD) for Oracle Portal. In TNS connect string field for Apache listener Configuration I entered the same name (abc) (chapter 4 of installation guide: installing oracle 9i Application server: step2, 3: page 10,11 of 25) as I was going to use for my Global database name later at database Identification steps (chapter 4 of installation guide: installing oracle 9i Application server: step 4: page 12 of 25)
Note: In an other installation I left the same fields (TNS connect string) blank but of no use.
(Please let me know if I have made any mistake here)
When installation of Oracle9i AS reaches 100% installer opens a command prompt and displays
ORA: 12541 TNS: No Listener
Enter user name:
When I enter SYSTEM as a user name it displays
Password:
I entered manager as password and then it displays
ORA 12560: TNSProtocol adaptor error
And once again it asks for user name and password
I once again enter system as a user and manager as password.
(Please let me know if I have made any mistake here)
After 100% completion of the installation the configuration tools screen appears
(Chapter 4 of installation guide: installing oracle 9i Application server: step 10: page 17 of 25) and the following tasks are performed
Net8 configuration Assistant succeeds
Oracle database configuration assistant succeeds
When The Oracle portal 3.0 configuration Assistant Starts
I hold the installation steps for oracle portal for a while and do some database configuration tasks that are necessary (may be some are not) for installation of portal.
(Please let me know if I have made any mistake here)
For example
Increase the table space size of Users (400 MB), and Temp (100MB) table spaces.
Validated invalid PL/SQL Modules with ULTRP.SQL script
(Please let me know if I have made any mistake here)
Installed dbms_job.sql package as it was mentioned in another guide (Oracle portal-to-Go installation Guide- Release1.0.2: Page 1: last line)
(Please let me know if I have made any mistake here)
Stopped the database and listener
And did some changes as was asked in Oracle portal-to-Go installation Guide- Release1.0.2
Edited the init<SID>.ora file and set the following fields
aq_tm_processes = 1
job_queue_processes = 4 (2 were recommended in guide but I left the already set values)
job_queue_interval = 30
(Please let me know if I have made any mistake here)
Also I did the following too (though these are recommended for Internet file system)
opern_cursors = 300 (in installation guide it is asked 255 but I kept the already set value)
shared_pool_size = 52438800 (50M was suggested and this is more than that)
processes = 200
(Please let me know if I have made any mistake here)
I started the database and listener
Proceeded the installation of Oracle Portal as is described in installation guide for Oracle 9i Application guide 1.0.2.0.0
And successfully completed the installation of Oracle Portal
There were no errors reported on the installer however when I read the installation log some errors were mentioned at the end of the file
Please see the attached log file.
I also completed all the post installation tasks at the end of chapter 4 of Oracle9i Application Server installation guide 1.0.2.0.0 except the configuration of Oracle Internet file system (is it necessary for running Oracle Portal to Go)
When I run the oracle portal to go the following situation is encountered
Working: http://localhost/pls/portal30/admin_/dadentries.htm
Error at: http://localhost/pls/portal30/portal30.home
Error: The preference path does not exist: Oracle.Portal.Page (WWC-51000)
(And this is the main source of confusion)
Working: http://localhost/pls/portal30/admin_/gateway.htm?schema=portal30
Working: http://et-wks-08:5555/invoke/wm.server.admin/adminPage
Are there any other guides and post installation steps still to follow to successfully run this Portal to Go or it is sufficient?
I can also send the installation logs of both Oracle 9i application server (installActions.log and installActions2001-05-28_03-50-56-PM.log) and Oracle portal to Go (install.log).
If you ask, I can send you the installation guides that I have followed and the screen shoots of the error messages for a detail review.
Moreover can anyone please tell me if this version of Oracle 9i Application server is ok or I must try some other version?
Also advise any other if any successful configuration and installation options.
Is it possible to run this portal to go with any other installation options/arrangements/configurations etc?
Any help from anyone will be highly appreciated.
Regards,
Muhammad Usman,
Software Engineer
EssTec Lahore, Pakistan.

Hi,
If you use portal 30 instead of OAS, The installation gives you the Apache ready.
Pablo
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tarun Singhal ([email protected]):
Hi,
I am trying to implement Portal-to-go application .
For installing Oracle Portal-To-Go 1.0.2 ,I followed oracle
documectation.Now I want to install Portal-To-Go 1.0.2
application using
a) winnt ver. 4.0 (SP3)
b) Oracle 8i
c) Oracle Application server release 4.0.8.1
d) servlet patch set
e) pl/sql cartridges.
(Oracle 8i and OAS 4.0.8.1 are installed with different oracle home directories.)
I have installed winnt , OAS rel.4.0.8.1. both are working fine
.now I want to install servlet Patch set and
pl/sql cartridges.I am unable to locate the information and software for this on oracle site.
can any body tell me why servlet patch set and pl/sql cartridges
required for this application and
from where should i download the servlet patch set software and PL/SQL cartriges
for this version.
Are the above specified softwares are compatible with each other or something extra
required for this installation. Is service pack 3 (winnt 4.0) compatible
with portal-to-go 1.0.2
Can anybody help me please ?
Regards
Preeti Madhukar
([email protected])<HR></BLOCKQUOTE>
null

Error while registering a new WSRP provider in Oracle portal

Hi,
I'm trying to add a new provider to the portal repository by registering a new WSRP provider in Oracle Portal. I'm getting the following error:
An error occurred when attempting to call the providers register function. (WWC-43134)
An error occurred during the call to the WSRP Provider: java.rmi.RemoteException: Runtime exception; nested exception is:
deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.streaming.XMLReaderException: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
Java stack trace from root exception:
com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2015)
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2000)
at com.sun.xml.rpc.sp.Parser2.processStartElement(Parser2.java:2794)
at com.sun.xml.rpc.sp.Parser2.parseContent(Parser2.java:3036)
at com.sun.xml.rpc.sp.Parser2.parse(Parser2.java:2360)
at com.sun.xml.rpc.streaming.XMLReaderImpl.next(XMLReaderImpl.java:105)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextContent(XMLReaderBase.java:23)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextElementContent(XMLReaderBase.java:41)
at oracle.webdb.wsrp.PortletDescription_LiteralSerializer.doDeserialize(PortletDescription_LiteralSerializer.java:94)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:174)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:84)
at oracle.webdb.wsrp.ServiceDescription_LiteralSerializer.doDeserialize(ServiceDescription_LiteralSerializer.java:88)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeria (WWC-43273)
Please help.
Regards,
Arunthomas
Edited by: 845949 on Mar 21, 2011 2:57 AM

what is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL

Oracle Portal help

Similar Messages

Maybe you are looking for