Oracle Portal in Home Network Server

I installed Oracle Portal in one of three home PCs in a home network. The other two access files and the printer through the Portal PC. Does anyone know if this could cause problems with the Portal installation? I understand Oracle products are robust but...?

Hi,
We are looking for similar upgrade? Were you able to make it?
If yes can you tell us the steps followed

Similar Messages

  • Home network/server

    Have been trying to network my Power Mac G5 1.6 with my Mini 1.5 Intel Core Solo
    G5 is running 10.5 and Mini is running 10.6
    The issue is that the Mini cant see the large drive on the G5 and I can not seem to find the right tutorial to show me how.
    Otherwise if anyone can point me in the right direction as how to convert the G5 in to a home server that would be helpful.
    Thank you for your time!

    Thank you for your reply!
    Enabled sharing is:
    DVD
    File
    Remote login
    Remote Management
    The drive I can not access is a secondary drive.
    I have logged into the G5 from the Mini and can access the boot drive and all of its contents.
    The secondary drive is set as shared folder and is also in the Shared Folders list under Sharing in System Preferences.

  • Why Can't I Recieve Email Outside Of My Home Network Server?

    So i just got my iphone and am having problem with my email. I have a shaw account ( i live in canada) that is synced with my mail on my macbook. when i plugged in my iphone it immediately obtained the information it needed and used it as my email for my phone, which was perfect. However, i can only receive mail when i hook up to my wifi internet network at my home. As soon as i leave its wifi range and even go into 3g range, i can not receive any email. Why is is this? Can anybody help me with this problem?
    Thanks guy for any help/comments/opinions you can give me.
    tmoult
    Message was edited by: tmoult
    Message was edited by: tmoult

    Take a look at this: http://www.iphoneincanada.ca/tips-tricks/how-to-setup-shawtelus-email-on-the-iph one/
    Be sure to scroll down to see the Edit about Shaw.

  • HT2305 I am using an Iomega Home Network Media Server Cloud Edition. I need to know to how to install Bonjour to the Iomega so that it will run my TiVo Desktop Program to transfer media files to/from the TiVo units to/from the Home Network Drive.  Help ?

    TiVo support has already advised me that Bonjour Browser is needed so that the TiVo can communicate with the Iomega.  The Iomega already has installed Apples' AFP protocol.
    The only way that I can currently transfer or access any files on the Iomega Home Network Cloud Drive with TiVo is if the folder on the Iomega Drive is listed in the TiVo Desktop Plus software that runs the TiVo server. This means that my laptop has to be continually running non-stop for files to transfer or for me to access them.
    I am looking for a way where TiVo will recognize the Iomega Home Network Server just as it recognizes the other TiVo unit on my home network.  TiVo menus have a place for adding an app that is TiVo compatiable; however, I have not been able to find any.
    Can someone please help?  TiVo has advised me that there 3rd Party software out in tech world that is capable of running the Tivo Desktop Server better than the TiVo Desktop Server Plus program itself but I have been unable to locate it..
    Thanks

    Just had a look at this: http://www.ufsexplorer.com/inf_xfs_nas.php and decided it's more hassle than it's worth so going to restore my files the sloooowwww way. Anyone know a good way to sync data to the new drive?

  • Oracle portal 11g- how to show content of a mounted folder in a page

    Hi there!
    We have installed oracle portal 11g on a server with cent os 5 on it. There is a certain shared folder in our network that we have mounted using autofs in a certain directory, on which every user has permissions of read and write, the contents of which we want to be able to access through a page in our portal. I have set up an alias in http server (Server configuration) to indicate the folder in discussion. However, when I press the link in that page, an error occurs (Forbidden-You are not authorized to see this page). What am I missing???? Is there a special configuration for shared folders in a domain?
    Thanks in advance!

    Hi Vinod,
    You can use cross site publishing feature of SharePoint 2013.
    http://blogs.msdn.com/b/justinvoels/archive/2012/09/24/sharepoint-2013-search-driven-publishing-and-cross_2d00_site-collection-publishing-overview.aspx
    https://technet.microsoft.com/en-us/library/jj635883.aspx
    Alternative to cross-site publishing in SP Online
    https://www.youtube.com/watch?v=chwHhEmIERg
    Best Regards,
    Brij K
    http://bloggerbrij.blogspot.co.uk/

  • Oracle Portal

    Is Oracle Portal for Intranet Development only? Can you create a portlet and post it on your company web site for the access by external users?
    We want to post a form on our company web site for the access by the public to get some data in. Can this be done by using Oracle Portal.

    I have installed Oracle Portal from 9i Application Server CD. I chose HTTP only option for this installation and allowed the installation to do the configuration of the Portal.
    After that I created a form and report portlet as a part of application. Then I created a page and was able to publish portlets on this page. I checked this page for public access which indicates that users can view this page without loging in the portal.
    Now I am stuck, since I am not sure what URL user need to provide to access this page without loging in the portal? From Portal home page user have to login to access this portal, but that is not what we want. We would like to publish this page, so any external user will be able to view the page, enter and submit data back to us.
    Can you provide details on how to publish Portal page for external users so they can view and enter data over the web?
    null

  • Oracle Portal page load performance

    We have implemented Oracle Portal - Our HOme Page takes a long time to load. Can anyone suggest ways to improve the page load performance for portal

    - please look at the application log and apache logs. do you see any indicators there? are you getting any errors too (timeout errors, etc) along with slow speed?
    - performance depends upon a variety of factors. please tell us about your system, version, number of servers and the number of users and size of db.
    - please be a little more descriptive in your questions to get a reasonable answer. that's usually a sign of an Administrator who should be dealing these issues, instead of an amateur developer for whom it shouldnt be a concern.
    regards,
    AMN

  • Should I use my older MBP to build a home network?

    Please forgive this most basic of all questions. I want to make the most of an older MBP I must keep in case I have to send in the one I use every day and I've read many suggestions to use it as a home network server. Could someone tell me if this seems worthwhile in a situation where we have 20mbs wireless with adequate storage and file sharing via MobileMe and DropBox. There are three Macs on the network not including two iPod Touches and one iPad. Our backup scenarios are adequate, and while I like the geek-factor of using Time Machine wirelessly to backup the newer MBP, that alone is not enough to justify the server setup. We already print wirelessly to a Canon PIXMA.
    Am I missing any features that warrant exploring this further? Thanks for any ideas.

    I'm not sure what you're asking. You can install OS X Server on your MBP, but I can't tell from your post what features of OS X Server you're looking to use.
    Generally speaking, laptops are not the best platform for servers, but they will work. Some folks bristle when there is mention of a laptop server, some say go for it, and I would say it depends on what the server is needed to do. I've been running a website using a spare copy of 10.4 Server on a G3 iMac for several years - but that's a far cry from using a G3 iMac to really use the functions of OS X Server. If you're satisfied with your backups and file sharing capabilities, a dedicated server may be overkill, and added maintenance. If you want or need more functionality that your current setup provides, then a server is worth considering.
    If you're not familiar with OS X Server, there will be a learning curve and possibly some frustration, and you'll want to back up the server as well which may add more work to keeping your network where you want it to be.
    So the short answer is, what will the server do?
    Jeff

  • How to integrate Oracle Portal running on Oracle Application Server 10.1.2

    I have an Oracle Portal running on a Oracle Application Server 10.1.2.
    Portal is responsible ( along with OID ) for the users authentication and authorization.
    There is a new JEE application that was developed recently, which the Portal users must have access to.
    HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
    HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
    Any ideas?
    I´ve already thought in a bunch of ways to do it:
    - put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
    - put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
    - Should I use OSSO?
    - Should I use OAM?
    Any help would be appreciated!
    Murilo

    Hi Murilo,
    A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
    Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
    Thanks,
    EJ

  • 2005 Mac Mini, can this connect this wirelessly to my home network as an iTunes server

    I have acquired a 2005 Mac Mini which appears to need direct cable connection to my router to access the internet.  Is there a way around this that  I can modify to access my home network wirelessly so I can use this as a stable location for my itunes library rather than my macbook pro.  The Mac mini is located in a room upstairs but my router is situated in the lounge alongside my Apple TV.  I want to try and get the mac mini to be the storage location for itunes that my apple tv will use.
    Would the addition of an airport express or the like be a solution or am I barking up the wrong tree.  Due to the age, is it likely that the mac mini can be used as a mini desktop only rather than as a file server?
    Any help with this would be greatly appreciated, as you have probably gathered, I am an apple novice

    Per this
    http://en.wikipedia.org/wiki/Mac_Mini
    an internal wifi card was optional.
    You need a USN wifi stict that is compatible with your Mac. This one shuld work
    http://www.meritline.com/usb-wifi-wireless-lan-internet-adapter-card---p-79469.a spx?source=fghdac&gclid=CKPZ_tmalLcCFUFV4Aod_h4AZg
    It says:
    Supports Windows , ME, 2000, XP, vista , windows 7,MAC OS 10.X, Linux
    Just mak sure that what yo get works with OSX 10.4.11 or 10.5.8. Your G4 Mini can only go to 10.5.8

  • I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    Posted in error.

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Oracle Portal returns 500 error running under Weblogic 11g server

    I've got Oracle Portal set up under Weblogic 11g.
    SSO running, talking to OID 11g, also running under the same Weblogic 11g server. Tested SSO, it is working well.
    After the install (no errors or issue on install), I go to http://<server>:8090/portal/pls/portal and geta Error 500 - Internal Server Error.
    I traced down the problem to OHS - in ohs1.log:
    [2009-08-04T10:09:15.0512-05:00] [OHS] [ERROR:32] [OHS-9999] [odl_log.c] [host_id: <server>] [host_addr: 127.0.0.1] [tid: 1320139072] [user: oracle] [ecid: 004S594zs25Fw000jzwkno0002740001NK] [rid: 0] [VirtualHost: main] Request Failed for : /portal/pls/portal, Resp Code : [500]
    [2009-08-04T10:09:15.1212-05:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: <server> [host_addr: 127.0.0.1] [tid: 1330628928] [user: oracle] [ecid: 004S5953tHhFw000jzwkno0002740001NL] [rid: 0] [VirtualHost: main] File does not exist: /opt/oracle/Middleware/asinst_2/config/OHS/ohs1/htdocs/favicon.ico
    So the problem is favicon.ico is missing, which I confirmed. Does this mean a bad deployment of an .EAR file? What should I do?

    Yes, it seems you are correct....this is from WLS_PORTAL-diagnostic.log
    Looks like the real problem is ERROR: Failed to load C shared library in RepositoryGateway after calling RepositoryGatewayJNI.load:
    [2009-08-05T08:32:08.333-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBekbL6Fw000jzwkno1AU3uT000001,0] [APP: portal] Portal Servlet Context Listener destroy started
    [2009-08-05T08:34:14.191-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Initializing Portal Servlet Context Listener
    [2009-08-05T08:34:14.534-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Creating Repository Service
    [2009-08-05T08:34:14.540-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryService.constructor(<3 args>), PLSQL_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_plsql.conf[[args: serverInfo=WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 , contextRoot=/portal, logMode=error]]
    [2009-08-05T08:34:14.578-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryServiceConfig, DAD_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_dads.conf, CACHE_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_cache.conf
    [2009-08-05T08:34:14.582-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryServiceConfig, dadRetriever = oracle.webdb.repository.service.DadFileConfigRetriever@26d4835, cacheRetriever = [email protected]7
    [2009-08-05T08:34:14.622-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Calling RepositoryGatewayJNI.load ...
    **ERROR STARTS HERE
    [2009-08-05T08:34:14.637-05:00] [WLS_PORTAL] [ERROR] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] ERROR: Failed to load C shared library in RepositoryGateway!
    [2009-08-05T08:34:14.665-05:00] [WLS_PORTAL] [ERROR] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId:
    <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] ERROR: Repository Service creation failed. Please check previous log entries for possible cause.
    [2009-08-05T08:34:14.911-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal.config.modplsql.mbeans.DadManagerMXBeanImpl] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] **** Inside Reloaded, NOW Register mbean = : /pls/portal
    [2009-08-05T08:34:14.915-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal.config.modplsql.mbeans.DadManagerMXBeanImpl] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] **** Inside RegisterBean, global beanName = : oracle.portal.config:subtype=DADs,name=/pls/portal,type=PortalConfig,Application=portal
    [2009-08-05T08:36:16.717-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portlet.server.wsrp.mbean.WSRPTransientConfigMXBeanImpl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IBelXi4Fw000jzwkno1ARF2b0004Zm,1:5002] [APP: wsrp-tools] Found WLS AppDeployment MBean com.bea:Name=portalTools#11.1.1.1.0,Type=AppDeployment

  • Time capsule first said the back up was delayed no it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address help!

    time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!

    Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??

  • Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

    Dear All Precious Friends,
    I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
    I have already installed Oracle Database 11g Release 2 -------
    ----Then i configured JAVA Access bridge
    --------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
    -----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
    ..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
    -----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
    Please help my Oracle Friends
    Your early help will be highly appreciated.
    thanks and regards
    Hassan

    You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
    In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
    First look for this link then drill into it:
    Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
    In this section you will find the following:
    This is the full product installation of FMw 11 Release 2 (Forms & Reports)
    Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
    This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
    This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6.  This is NOT a full product installation - just a patch
    Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
    There are no patch sets for Release 2 as of yet.

Maybe you are looking for

  • HP laserjet 100 color MFP M175nw -Driver for scanning in windows 8.1??

    scanner doesn't work since installing windows 8.1.  Doctor for scanning and printing want's me to install new driver. But I can't find it. Hope I've missed it

  • Trying to serialize a simple object

    Hi, I can't seem to create an ObjectInputStream. The error is noted in the code below. I also noticd that the output file where I seemingly wrote the object without problems is empty. import java.io.*; //Class from which an object is serialized: clas

  • How to broadcast call on all phones in intercom

    Dears, Hope you doing well Please guide me how I can make a call from one intercom extension on to all intercom extension present within the network. Ex: An Alert on all extension through intercom service.

  • ADOBE Interactive form integration in Netweaver

    I have installed the Netweaver Developemnt Studi0 2.0.5 from SDN. When I checked the installation log it gives the some of the ADOBE form designer componet files  are missing from the initial source file extract(ZIP). Did anybody experienced the same

  • I need to now the byteslength in ncRead

    I use nationals PCI CAN and had created a Read and Write Frame API in Visual c++. When I read the Can bus I got the hole message and everything is fine. The problem is that the can bus I read from send message with different byte lengths and I need t