Oracle Portal

Is Oracle Portal for Intranet Development only? Can you create a portlet and post it on your company web site for the access by external users?
We want to post a form on our company web site for the access by the public to get some data in. Can this be done by using Oracle Portal.

I have installed Oracle Portal from 9i Application Server CD. I chose HTTP only option for this installation and allowed the installation to do the configuration of the Portal.
After that I created a form and report portlet as a part of application. Then I created a page and was able to publish portlets on this page. I checked this page for public access which indicates that users can view this page without loging in the portal.
Now I am stuck, since I am not sure what URL user need to provide to access this page without loging in the portal? From Portal home page user have to login to access this portal, but that is not what we want. We would like to publish this page, so any external user will be able to view the page, enter and submit data back to us.
Can you provide details on how to publish Portal page for external users so they can view and enter data over the web?
null

Similar Messages

Error while altering a table in Oracle Portal

i have a table with primary key. i realize that the primary is not required and when i get rid of primary key thru Oracle Portal and say OK ... i am encountered with the following error -
Error:
ORA-25150: ALTERING of extent parameters not
permitted (WWV-11230)
Failed to parse as PORTAL30 - alter table
BPSITEST.JEN_TEST_PRIMARY_KEYS
drop PRIMARY KEY
modify(
EMP_ID NUMBER(10),
LAST_NAME VARCHAR2(10),
FIRST_NAME VARCHAR2(10))
PCTFREE 10
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
ENABLE CONSTRAINT SYS_C003038 ENABLE CONSTRAINT
SYS_C003039 ENABLE CONSTRAINT SYS_C003040
(WWV-08300)
Any Ideas .... anyone ... ??
thanx
null

ORA-00054: resource busy and acquire with NOWAIT specified The table is currently in use by something else.
Werner

Images used inside the Portlets are not getting displayed on Oracle Portal

I am registering my JSR Portlet producer on Oracle Portal server but when its rendered on the portal page its not showing images.It just shows a red cross mark showing image is not loaded.Can anyone help me out please samt thing is happening with CSS also.Please reply soon

I'd check the image properties (right click the x and choose properties) and see what the path is for the image. If it is a relative path, you need to make sure that the file is in that location on the Application Server. /images/myImage.jpg would mean the file should be in $ORACLE_HOME/portal/images on the midtier.

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

ADF Application and Oracle Portal Login Page

We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
How can I accomplished it? Any idea?
Thanks,
AP

Shay,
1. I created blank ADF project
2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
4. Copied reports_tld.jar file under the directory created in 3.
5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

How to change Oracle Portal PORT?

Hi
I installed Oracle Portal and Wireless.
But i dont know PORT and URL to access and login to that.
So What is the url And PORT for portal
or should i configure any thing?
thanks
Pratap Reddy

Assuming you right-clicked the image and verified that it's pointing to the images virtual path, then did you clear WebCache cache contents (as well as your browser's)?

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

Sample PL/SQL Portlet Source Code for Oracle Portal 9ias

Hi, I'm a newbie of Oracle Portal technology, and I have a problem:
I would create a PL/SQL portlet that realizes the following functions:
1) Retrieve the username of the portal user logged from WWCTX_API.GET_USER function.
2) Insert into an oracle db table two values about two hidden fields in the HTML FORM of the portlet.
3) Realize the insert commit through the click on the submit button on the Html form of the portlet. I would redirect by the same button to an other page url also.
I've never developed in Portal, and may be useful if someone could post me the source code of the SHOW MODE SECTION in the PROCEDURE SHOW of a SAMPLE PL/SQL PORTLET that realizes the upper functions.
Thanks a lot....

Hi
Here's the code from Helloworld_Portlet example:
procedure show
p_portlet_record wwpro_api_provider.portlet_runtime_record
is
l_portlet wwpro_api_provider.portlet_record;
begin
if (not is_runnable(
p_provider_id => p_portlet_record.provider_id
,p_reference_path => p_portlet_record.reference_path)
) then
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;
end if;
Retrieve the portlet information.
l_portlet := get_portlet_info(
p_provider_id => p_portlet_record.provider_id
,p_language => p_portlet_record.language
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
if (p_portlet_record.has_title_region) then
Draw the portlet header and specify what links are available
from that header (i.e. details, customize, help, and about).
The has_title property is set at the page region level.
wwui_api_portlet.draw_portlet_header
p_provider_id => p_portlet_record.provider_id
,p_portlet_id => p_portlet_record.portlet_id
,p_title => l_portlet.title
,p_has_details => true
,p_has_edit => true
,p_has_help => true
,p_has_about => true
,p_referencepath => p_portlet_record.reference_path
,p_back_url => p_portlet_record.page_url
end if;
Draw the portlet borders.
The has_border property is set at the page region level.
wwui_api_portlet.open_portlet(p_portlet_record.has_border);
Display the content of the portlet in the show mode.
Use the wwui_api_portlet.portlet_text() API when
generating the content of the portlet so that the
output uses the portlet CSS.
htp.p(wwui_api_portlet.portlet_text(
p_string => 'Hello World - Mode Show'
,p_level => 1
if (p_portlet_record.has_border) then
wwui_api_portlet.close_portlet;
end if;
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_ABOUT) then
Display the about page for the portlet.
htp.p('Hello World - Mode Show About');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT) then
Display the edit page for the portlet.
htp.p('Hello World - Mode Show Edit');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_HELP) then
Display the help page for the portlet.
htp.p('Hello World - Mode Show Help');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT_DEFAULTS) then
Display the edit defaults page for the portlet.
htp.p('Hello World - Mode Edit Defaults');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_DETAILS) then
Display the details page for the portlet.
htp.p('Hello World - Mode Show Details');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_PREVIEW) then
Display the preview page for the portlet.
htp.p('Hello World - Mode Show Preview');
end if;
end show;
I think you need to add this:
You can get the values of your html-form with this command:
v_hidden_1 varchar2(256);
v_hidden_2 varchar2(256);
v_hidden_1 := wwpro_api_parameters.get_value('name_of_hidden_1_in_html_form','p');
v_hidden_2 := wwpro_api_parameters.get_value('name_of_hidden_2_in_html_form','p');
You can get the actual URL with this command:
v_url := p_portlet_record.page_url;
Hope that helps.
Regards,
Mark

Problem running Oracle Portal to Go (Oracle9i 1.0.2.0.0)

I have installed Oracle9i Application Server WE 1.0.2.0.0 Standard Edition on Windows2000 Professional Edition. I am getting problems regarding running Portal to Go.
The installer said that installation was successful. Moreover I have done the configuration tasks mentioned Oracle9i installation guide under post installation steps for Oracle9i.
But Oracle Portal to Go is not running and returning error message. Are there some other tasks still to perform to configure the Oracle Portal to Go Standard Edition?
Here it is a brief Description of what I have done with the installations process
System: Pentium II 500 MHZ with 256 MB RAM and 15 GB Hard Disk so enough space available for installations.
Windows 2000 professional was freshly installed
All pre installation tasks are done like paging file size is 896MB
Important Installation steps and points are as under (Standard Edition of Oracle 9i Application Server 1.0.2.0.0):
I followed all the steps given in Oracle 9i AS installation guide
On Windows 2000 Installer never asks for reboot before actually installing the Oracle 9i application server (Chapter 4 of installation guide: preparing system for installation: step5: page 5 of 25). So I manually reboot the system
During installation when I reached Database Access Descriptor (DAD) for Oracle Portal. In TNS connect string field for Apache listener Configuration I entered the same name (abc) (chapter 4 of installation guide: installing oracle 9i Application server: step2, 3: page 10,11 of 25) as I was going to use for my Global database name later at database Identification steps (chapter 4 of installation guide: installing oracle 9i Application server: step 4: page 12 of 25)
Note: In an other installation I left the same fields (TNS connect string) blank but of no use.
(Please let me know if I have made any mistake here)
When installation of Oracle9i AS reaches 100% installer opens a command prompt and displays
ORA: 12541 TNS: No Listener
Enter user name:
When I enter SYSTEM as a user name it displays
Password:
I entered manager as password and then it displays
ORA 12560: TNSProtocol adaptor error
And once again it asks for user name and password
I once again enter system as a user and manager as password.
(Please let me know if I have made any mistake here)
After 100% completion of the installation the configuration tools screen appears
(Chapter 4 of installation guide: installing oracle 9i Application server: step 10: page 17 of 25) and the following tasks are performed
Net8 configuration Assistant succeeds
Oracle database configuration assistant succeeds
When The Oracle portal 3.0 configuration Assistant Starts
I hold the installation steps for oracle portal for a while and do some database configuration tasks that are necessary (may be some are not) for installation of portal.
(Please let me know if I have made any mistake here)
For example
Increase the table space size of Users (400 MB), and Temp (100MB) table spaces.
Validated invalid PL/SQL Modules with ULTRP.SQL script
(Please let me know if I have made any mistake here)
Installed dbms_job.sql package as it was mentioned in another guide (Oracle portal-to-Go installation Guide- Release1.0.2: Page 1: last line)
(Please let me know if I have made any mistake here)
Stopped the database and listener
And did some changes as was asked in Oracle portal-to-Go installation Guide- Release1.0.2
Edited the init<SID>.ora file and set the following fields
aq_tm_processes = 1
job_queue_processes = 4 (2 were recommended in guide but I left the already set values)
job_queue_interval = 30
(Please let me know if I have made any mistake here)
Also I did the following too (though these are recommended for Internet file system)
opern_cursors = 300 (in installation guide it is asked 255 but I kept the already set value)
shared_pool_size = 52438800 (50M was suggested and this is more than that)
processes = 200
(Please let me know if I have made any mistake here)
I started the database and listener
Proceeded the installation of Oracle Portal as is described in installation guide for Oracle 9i Application guide 1.0.2.0.0
And successfully completed the installation of Oracle Portal
There were no errors reported on the installer however when I read the installation log some errors were mentioned at the end of the file
Please see the attached log file.
I also completed all the post installation tasks at the end of chapter 4 of Oracle9i Application Server installation guide 1.0.2.0.0 except the configuration of Oracle Internet file system (is it necessary for running Oracle Portal to Go)
When I run the oracle portal to go the following situation is encountered
Working: http://localhost/pls/portal30/admin_/dadentries.htm
Error at: http://localhost/pls/portal30/portal30.home
Error: The preference path does not exist: Oracle.Portal.Page (WWC-51000)
(And this is the main source of confusion)
Working: http://localhost/pls/portal30/admin_/gateway.htm?schema=portal30
Working: http://et-wks-08:5555/invoke/wm.server.admin/adminPage
Are there any other guides and post installation steps still to follow to successfully run this Portal to Go or it is sufficient?
I can also send the installation logs of both Oracle 9i application server (installActions.log and installActions2001-05-28_03-50-56-PM.log) and Oracle portal to Go (install.log).
If you ask, I can send you the installation guides that I have followed and the screen shoots of the error messages for a detail review.
Moreover can anyone please tell me if this version of Oracle 9i Application server is ok or I must try some other version?
Also advise any other if any successful configuration and installation options.
Is it possible to run this portal to go with any other installation options/arrangements/configurations etc?
Any help from anyone will be highly appreciated.
Regards,
Muhammad Usman,
Software Engineer
EssTec Lahore, Pakistan.

Hi,
If you use portal 30 instead of OAS, The installation gives you the Apache ready.
Pablo
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tarun Singhal ([email protected]):
Hi,
I am trying to implement Portal-to-go application .
For installing Oracle Portal-To-Go 1.0.2 ,I followed oracle
documectation.Now I want to install Portal-To-Go 1.0.2
application using
a) winnt ver. 4.0 (SP3)
b) Oracle 8i
c) Oracle Application server release 4.0.8.1
d) servlet patch set
e) pl/sql cartridges.
(Oracle 8i and OAS 4.0.8.1 are installed with different oracle home directories.)
I have installed winnt , OAS rel.4.0.8.1. both are working fine
.now I want to install servlet Patch set and
pl/sql cartridges.I am unable to locate the information and software for this on oracle site.
can any body tell me why servlet patch set and pl/sql cartridges
required for this application and
from where should i download the servlet patch set software and PL/SQL cartriges
for this version.
Are the above specified softwares are compatible with each other or something extra
required for this installation. Is service pack 3 (winnt 4.0) compatible
with portal-to-go 1.0.2
Can anybody help me please ?
Regards
Preeti Madhukar
([email protected])<HR></BLOCKQUOTE>
null

How to preview a page in Oracle Portal?

Hi gurus,
I'd like to know if there is anyway to preview a page in Oracle Portal 10g 9.0.4.
Customer needs to preview the page (how it will looks like) before inserting
new contents (image, link, url, item, portlet etc.) in it, so just the page manager
(user or group that has MANAGER access in that page) can see it that time and
no other user can, until the page manager aprove the new format of the page and
"deploy" the page to the user.
Any suggestions on how to do this?

Hi,
I'm afraid there's not a preview option as you describe it. It is something our customers have asked for too, so I'll be happy if somebody knows a decent way to accomplish this. I hope this is included in a future release.
Kind regards.

How can I uninstall a damaged installation of Fusion - PFRD 11.1.1.6.0 - Oracle Portal, Forms, Reports and Discoverer

Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
Mathias

Hey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga

Error while registering a new WSRP provider in Oracle portal

Hi,
I'm trying to add a new provider to the portal repository by registering a new WSRP provider in Oracle Portal. I'm getting the following error:
An error occurred when attempting to call the providers register function. (WWC-43134)
An error occurred during the call to the WSRP Provider: java.rmi.RemoteException: Runtime exception; nested exception is:
deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.streaming.XMLReaderException: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
Java stack trace from root exception:
com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2015)
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2000)
at com.sun.xml.rpc.sp.Parser2.processStartElement(Parser2.java:2794)
at com.sun.xml.rpc.sp.Parser2.parseContent(Parser2.java:3036)
at com.sun.xml.rpc.sp.Parser2.parse(Parser2.java:2360)
at com.sun.xml.rpc.streaming.XMLReaderImpl.next(XMLReaderImpl.java:105)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextContent(XMLReaderBase.java:23)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextElementContent(XMLReaderBase.java:41)
at oracle.webdb.wsrp.PortletDescription_LiteralSerializer.doDeserialize(PortletDescription_LiteralSerializer.java:94)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:174)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:84)
at oracle.webdb.wsrp.ServiceDescription_LiteralSerializer.doDeserialize(ServiceDescription_LiteralSerializer.java:88)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeria (WWC-43273)
Please help.
Regards,
Arunthomas
Edited by: 845949 on Mar 21, 2011 2:57 AM

what is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL

Custom DB authentication to an application from Oracle Portal not working.

Hi All,
We have a Portal customized and integrated to LDAP for SSO.
From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
Below is the code:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
<jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
<property name="role.mapping.dynamic" value="true"/>
<property name="custom.loginmodule.provider" value="true"/>
</jazn>
and in jazn-data.xml, we gave the role mapping.
But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
Can anyone throw light on this?
Do we need to give the same configuration in the j2ee/home/config directory files also?
Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
Any help in this regard will be highely appreciated.
Thanks,
Sasi Bhushan

Hi All,
We have a Portal customized and integrated to LDAP for SSO.
From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
Below is the code:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
<jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
<property name="role.mapping.dynamic" value="true"/>
<property name="custom.loginmodule.provider" value="true"/>
</jazn>
and in jazn-data.xml, we gave the role mapping.
But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
Can anyone throw light on this?
Do we need to give the same configuration in the j2ee/home/config directory files also?
Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
Any help in this regard will be highely appreciated.
Thanks,
Sasi Bhushan

Create a report in oracle portal based on a different database.

Hello,
I'm trying to create a report in oracle portal based on table in a different database than te one from portal.
I have allready succesfully added a new DAD in the enterprise manager, but how can I select that database in the portal environment?
Thierry

Hi,
Please check the below link
http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_voyager_userguide_en.pdf
I think you can get more information in Integration Kits - SAP or Business objects forum.

Use 11g portlet in Oracle Portal or WSRP1 in WebCenter application fails

Hi,
I build a portlet as in the example at http://download.oracle.com/otndocs/tech/webcenter/files/owc_r11_portlet_bridge_demo.html and try to consume it from Oracle Portal. This is failing with a connection to the server failed error in the browser. I then tried to consume it in a webcenter application as wsrp2 and it works correctly. If i change to wsrp1 it fails with the same error. In the logging i see the following error:
4-jan-2008 12:10:01 com.evermind.server.ServerBase log
WARNING: WebcenterTest-ViewController-webapp: Servlet error
oracle.security.jazn.JAZNRuntimeException: Method not supported
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:480)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:583)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
     at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:646)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:614)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:405)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:168)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:149)
     at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:237)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:29)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:877)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: Method not supported
     at oracle.portlet.wsrp.v1.ServerToWSRPv1.getResource(ServerToWSRPv1.java:7727)
     at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.getResource(ActivityServerWrapper.java:1519)
     at oracle.portlet.client.techimpl.wsrp.WSRPResourceOperationPipe.execute(WSRPResourceOperationPipe.java:116)
     at oracle.portlet.client.techimpl.wsrp.WSRPResourceOperationPipe.pre(WSRPResourceOperationPipe.java:43)
     at oracle.portlet.client.service.pipeline.PipeContext.internalExecute2(PipeContext.java:531)
     at oracle.portlet.client.service.pipeline.PipeContext.internalExecute(PipeContext.java:418)
     at oracle.portlet.client.service.pipeline.PipeContextRunnable.run(PipeContextRunnable.java:23)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
     at java.util.concurrent.FutureTask.run(FutureTask.java:123)
     at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:391)
     at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:416)
     ... 1 more
Does this mean wsrp1 is no longer supported with 11g because of client side ajax? Would this mean that Oracle Portal consuming 11g portlets is out of the question?
Kind Regards,
Andre Jochems

Thank you for the clear answer. Just curious .... if Portal 11g supports wsrp 2 will it be possible to have a portlet generate events and link those in portal to page parameters which in turn can be linked to portlet input parameters as is possible with a pdk java portlet? In other words, ... can the inter portlet communication be set/edited/wired at runtime in Portal instead of design time as is the case with WebCenter?
Also if Portal 11g will have these features what is the added value of WebCenter, aside from not needing the extra infrastructure to run Portal?
While i am at it, ... how will the skin and stylesheets be handled when a 11g rich faces portlet is rendered in Portal, will it keep its nice looks? Can they be mapped to portal defined styles for portlets to adapt the style to the surrounding portal?
Kind Regards,
Andre Jochems

Can no longer connect to iProjects using Oracle Portal

From one day to the other, I can no longer connect to iProjects using Oracle Portal. It gives the message "Cannot connect to iprojects-files.oracle.com" because the username or password is incorrect. I can connect using the web interface though, using the same username and password. I type my username in uppercase and password in lowercase. Tried other combinations (upper and lower) as well, to no avail.
Any Idea?
Jan Kettenis

JEM24 , your suggestion is included in:
- iOS: Troubleshooting Wi-Fi networks and connections
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
JEM24 wrote:
Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

Oracle Portal

Similar Messages

Maybe you are looking for