Oracle Pre Built Integration 11.2 configuration issue

I installed Pre Built Integration 11.2 in Oracle AIAFP 11.1.1.6. After installation I tried to configure by using "Deployment Configuration Wizard" and following the below steps mentioned in the Oracle document
4. Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for
Linux based systems and aiaenv.bat for Microsoft Windows to configure the
environment.
5. Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh for
Linux based systems and aiaconfig.bat for Microsoft Windows.
This launches the AIA DCW.
6. Click Next.
However the DCW "Deployment Configuration Wizard" is not listing any of the pre built integration for deployment in the second screen(after welcome screen)
Please let me know if any specific configuration has to performed or how to resolve this.
Thanks

Thank you for the suggestions.
Before I could read your reply, I uninstalled EPM and re-installed. After installation completed, I launched the Configurator from the last window, instead of launching it separately later. And it worked this time. All the configurations completed successfully.
But now, I have different issues, I am not able to go to any URL including the Workspace URL. I get 401 error. When I run diagnostics tool, I get a lot of entries highlighted in red. Most of them under the category HTTP. I will post the entries later. I tried stopping EPM system and restarting many times but nothing helped.
FYI... I deployed them all to Single Web Application Server (Web Logic) and when it asked for Web Server, I chose the WebLogic HTTP server which was the default option. IIS is also installed and services are running.

Similar Messages

  • Do I have to build adapters to Oracle AIA for pre-built integrations?

    Hello,
    The way Oracle AIA provides pre-built integration packs for Siebel, SAP & other products - how do I develop such integrations for my application? Through AIA foundation packs or do I've to write an adapter to connect with Oracle AIA?
    Thx, Amol.

    There is a wizard in AIA that creates a few composites for you which follow the rules of the AIA-Specification. Then you can fill them with application-specific-code yourself.
    Edited by: user10942884 on 25.06.2010 03:29

  • Error installing Oracle Outlook Email Integration On Demand: Registry Issue

    Good day all-
    Hoping that someone has come across this issue before and is aware of a solution - I have a user that is unable to install the Oracle Outlook Email Integration On Demand plug in for Outlook.
    Outlook is not running when the install is done, yet a "Severe" error pop-up is generated during the install which says: "Setup was not able to write all necessary registry entries. The installation will be aborted!"
    Still see the same issue after a reboot and no other users are having a problem installing it - anyone have any ideas and/or which registry entires the installer is trying to touch?
    Thanks!

    Hi,
    Does the user have admin rights to their machine? Registry entries for OEI are writing to the following:
    HKEY_LOCAL_MACHINE>SOFTWARE>Windows>Uninstall>Oracle Outlook Email Integration On Demand
    HKEY_LOCAL_USER>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    HKEY_LOCAL_USERS>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
    Thanks,
    Sean

  • Oracle Linux 5 (pre-built developer vm)

    Hello,
    Apologies if this is the wrong forum. Please let me know which forum I should use if it isn't this one.
    I'd like to upgrade both the database (Oracle 11.2.0.2) and the Linux (Oracle Linux 5) of the Oracle pre-built vm that I downloaded from here : http://www.oracle.com/technetwork/community/developer-vm/index.html
    Database side I'm OK with, getting the zips etc. Where do I get the binaries to upgrade the OS? Metalink doesn't seem to have an Oracle Linux patch section if it isn't for another Oracle product ON Oracle Linux. I'm probably not using it properly.
    regards,
    Matt

    I have no experience with updating the VM image you mention, nor do I know whether this will work or is a good idea. But to answer your question where to obtain Oracle Linux binaries or update the system:
    You can download installation DVD's from:
    https://edelivery.oracle.com/linux
    You can do free updates of Oracle Linux configuring Oracle Public Yum using the el5_latest repository and typing "yum update" at the command line. More info at:
    http://public-yum.oracle.com/
    Upgrading from one major Oracle or RHEL Linux release to another, e.g. 5.x to 6.x is not supported and cannot be done by yum or other package managers.

  • How to view pre-built Dashboards and Reports of Oracle BI- Apps?

    Hi All,
    We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
    But we are facing problem in viewing any prebuilt dashboard or report.
    Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
    As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
    Any help would be highly appreciable.
    Regards,
    Manmohan Sharma

    Hi Damon,
    Thanks a lot.
    Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
    Could you please provide the path to get Prebuilt Dashboard & reports ?
    Regards,
    Manmohan Sharma

  • Is there a pre-built VM with just Oracle Linux?

    I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.

    881656 wrote:
    I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.
    I would second Bjorn's suggestion to just go ahead and install Oracle Linux from scratch. As a DBA you need to be familiar with a lot of OS level admin stuff, so installing the OS from scratch and doing the minimal configuration needed to install Oracle is, in itself, an important part of your professional development. If you take a shortcut of using a pre-built vm you are just stunting your own growth.

  • Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

    Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
    =============================================
    Hi All,
    I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
    What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
    Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
    What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
    The heirarchy in which reports try to look for the REPORTS_PATH is
    1) REPORTS.sh
    2) rwserver.conf
    3) Settings as per Oracle Enterprise Manager Configuration Settings.
    My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
    http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
    REP-51019: System user authentication is missing.
    ** the Singlesignon in rwservlet.properties is defined as no
    But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
    http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
    (which shows the report just run).
    Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
    Pls. feel free to ask me questions related to the environment set up.
    Thanks

    Your question belongs in {forum:id=84}
    John

  • OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7

    Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
    Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
    C:\Documents and Settings\JOEY>emctl start dbconsole
    OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
    When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
    I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
    Why is this folder changing its name and how can I resolve this issue?
    Thanks.

    Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
    What steps did you take to set the hostname to JOEY-PC ?
    Srini

  • Installing Pre-built Virtual Machine for Oracle WebCenter Portal error

    Hi,
    I am trying to install the Pre-built Virtual Machine for Oracle WebCenter Portal: Framework 11gR1 (11.1.1.4.0) onto a Laptop (500G HDD 8G Ram) running Windows 7 to learn.
    http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html
    I want to run in a VirtualBox Linux setup etc.
    I have downloaded all the files except the REAVDD-HOL-WC.ovf which would not download so I saved in browser to the same directory etc.
    I have set the preferences in Virtual Box to the same directory where I have downloaded the files to but when I Import Applicance and select C:\users\Tony\Virtual Box VMs and select the defaults and import I get an error box stating:
    Failed to import appliance C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC.ovf.
    Could not open the medium storage unit 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk'.
    VD: error VERR_ACCESS_DENIED opening image file 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk' (VERR_ACCESS_DENIED).
    Result Code: VBOX_E_FILE_ERROR (0x80BB0004)
    Component: Appliance
    Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
    Anybody got any idea how to fix this?
    Thanks
    Tony
    Edited by: 880197 on 19-Aug-2011 03:08
    Edited by: 880197 on 19-Aug-2011 03:44

    I've imported this appliance (and others) on Windows 7 32-bit on a Lenovo W500, on an iMac, and on a MacBook. The one error you should encounter during the "import appliance" step is a path error related to shared folder (the canned/hard-coded path in the ovf file points to a place that is not likely to exist on your computer, so just comment out the D:\TEMP\Host path, or make it for that matter).
    <!--SharedFolders-->
    <!--SharedFolder name="Host" hostPath="D:\TEMP\Host" writable="false" autoMount="true"/ -->
    <!-- /SharedFolders-->
    You can alter system set memory_target=300M scope=both and set your VM memory to 2.5GB and everything will run fine (using the vmctl script to start up what's needed). The "1" option is all that is needed for the tutorial shown in the documentation. If you run the admin server, you will see things run a good bit slower. Part of the tutorial assumes you know about UCM and how to take the UCM content in the sample files and upload those into the repository. You can delete the file already loaded and then do a single file upload to "re-load" the various directories/folders for the menu/home/etc. Upload the png and other files into the same folder (menu.html, menuBanner.png, etc. all go into the same Menu folder). It's not worth the time to set the bulk upload because you have to go out into UCM and dig around the admin settings, stop/restart, and so on. You can also use the contentadmin user (welcome1) to do the file upload.

  • Oracle PeopleSoft CRM pre-built VM Template

    Hey!
    Am looking for a pre-built VM Template of Oracle PeopleSoft CRM.. In the instructions it says:
    Visit http://edelivery.oracle.com/oraclevm
    Complete your registration information (Name, Company Name, Email Address and Country) and click on the download agreement
    Select "Oracle VM Templates" from the "Select a Product Pack" pull-down menu
    Select "x86 64 bit" from the "Platform" pull-down menu
    Click "Go" and then select from the list of Oracle VM Templates
    Download and unzip the files and read the readme
    But I can't find PeopleSoft listed in after hitting the "Go" button!
    Is there any other way to download it?
    Thank you in advance.

    It seems Oracle needs to revisit their pages more often, the link you pointed is really out of date. The PSoft OVM CRM91 PTools 8.50 you read from the page you linked is dated from August-2010 when I see my software repository...
    The Peoplesoft OVM Templates have been globally decomissioned three years ago I think, you have no luck to find out one of them unless you have already downloaded them.
    Nowadays, Peoplesoft is working with the so-called Peoplesoft Images, virtual machine for VirtualBox. Unfortunately, only available for those who have a valid Customer Support Identifier (paid support) and access to My Oracle Support.
    The Peoplesoft images are rebuilt on regular basis, perhaps every quarter - depending of the application, with the highest maintenance level (application and tools).
    Nicolas.

  • Pre-built Oracle Solaris 11 VM - Invalid md4 checksum for part04

    Hi,
    Following the instructions and links available at:
    Pre-built Oracle Solaris 11 Express Developer Virtual Machine with Oracle Solaris Studio and GNU development tools
    http://www.oracle.com/technetwork/articles/servers-storage-dev/vms11expstudio-howto-401051.html
    I downloaded all 4 parts for this VM and the md5 checksums for the first three are fine, however part04 is invalid. I downloaded the part04 file twice with the same results. Judging from the small filesize (only 70MB) it appears to be truncated.
    Can someone investigate this part04 file and verify?

    I have encountered the same problem.
    My workaround was to download the full larger file using a download manager.
    I used DownThemAll for Firefox.

  • How to demonstrate pre-built Oracle BI capabilities?

    Hi Forum,
    Can anyone give me insight, on how to demonstrate Oracle BI capabilities to show the pre-built reports and dashboards with data?
    Please explain me the right approach for showcasing the capabilities of Oracle BI.
    Thanks

    HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

  • Config Pre-Built Oracle Virtual Environment for Minimalist

    Hi There
    I know you probably’ve got asked this question before - and i understand the 1GIG minimal requirement- , but is it possible to install the whole Pre-Built Oracle Virtual Environment, but then disable relevant components to clustering in order to utilize as a basic oracle environment.
    Alternatively is there a Pre-Built Oracle Virtual Environment for 9i.
    Regards
    Kayode

    Hi There
    I know you probably’ve got asked this question before - and i understand the 1GIG minimal requirement- , but is it possible to install the whole Pre-Built Oracle Virtual Environment, but then disable relevant components to clustering in order to utilize as a basic oracle environment.
    Alternatively is there a Pre-Built Oracle Virtual Environment for 9i.
    Regards
    Kayode

  • Pre-built Thesaurus for Oracle Text

    Could anyone provide me direction on where to get Pre-built Thesaurus For Oracle Text that is specific to pharmaceutical science companies.
    any advice would be appreicated

    There are two ways you can use pre-built Thesaurus in Oracle.
    1) Just as an earlier reply you got, use the Thesaurus Management System (TMS) product that comes with a prebuilt Medra database for mdeical and other related text mining.
    2) Import and supplement your own medical thesaurus into the existing thesaurus that comes pre-loaded with the database using the provided APIs. As an example, you could download from the web the UMLS thesaurus content, convert the data into the API required format and load the UMLS data into the database. You can then cluster and classify documents/abstracts based on themes or subject matter.
    Regards.

  • Email activity for soa and bam with pre-built virtualbox images

    Dear OTN,
    i am running pre built virtualbox image for soa and bam and want to run with email activity and configure the email inside the virtualbox can anyone help me with email activity in pre-built virtualbox image.
    Thanks & Regards,
    Pavan

    Hi there
    I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
    There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
    can we contact you offline to discuss your requirement?
    http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
    There are certified adapters available for EBS to FM as well.
    Regards
    Payal
    Edited by: PayalS on May 21, 2010 4:25 PM

Maybe you are looking for