Oracle Primavera Cost manager v 6.2 web access issue

Hi,
We are trying to integrate the cost manager for web access. However, after setting up the IIS for the latest version, an error message is generated saying the web access installation was interrupted abruptly.
Assistance is highly appreciated.
thank you,

One other thing to check is that iptables on your Oracle VM Manager box/vm is not blocking the Oracle VM Manager UI, to test type /sbin/iptables status, if iptables running turn it off by typing /sbin/iptables stop.

Similar Messages

Oracle Primavera Portfolio Management 9

Hi All,
I am planning to install OPPM 9.0 . I am trying to find in edelivery ,but i see EPPM 8.2 ,but haven't find software for OPPM 9 .
Can some please explain regarding this .
Regards,
Nag.

P6 EPPM 8.2 and OPPM 9 are two seperate products. Both are available for download at edelivery. Look for "Primavera Portfolio Management 9.0 SP1" for the OS you want to install.
Sachin Gupta

SAP Web Access Issues

Hello Experts,
I have been given a link for SAP Web Access. I am able to access transactions and post data and write programs. However, none of the GUI functionality is working and is giving shorts dumps when i click on the layout tab for Adobe, Internal error for form painter in smartforms and a file not found error for layout editor for screen painter. I raised this issue with the Ides team but they do not have a resolution for it and they too get the same error on all of there systems.
Has anybody enocountered this issue before and if so could you please give me some direction.
One point is that for an existing Adobe form i'm able to successfully execute it and display the form.
Thanks for your help!
Minhaj.

Dear Juan,
I can access another server with http://FQDN:50000, It will show the screen of SAP Web Application Portal.
After I check parameter icm/host_name_full , I did not maintain anything, it is working fine.
Why in ERP system, I did not maintain anything like that server, I have only maintain FQDN, It is not working and did not show anything. Pls suggest me how to solve it.
Regards,
Pannee

Application Itegrator - Outlook Web Access issue!

Dear all,
Currently, on a requirement to integrate Outlook Web Access into portal, I am required to create a system based on par file "webapps.par".
I've looked into SDN and Service Marketplace but unsuccesful to find the par file.
If any of them have been able to download it or are aware of the location to download, request you to provide it.
My mail id is "[email protected]".Appreciate any kind of help.
Thanks & Regards,
Sharath MG

Sharath,
Please refer to this blog.
Configuring Outlook Web Access iViews
Hope this helps.
Cheers,
Sandeep Tudumu

CiscoWorks LMS 3.1: HUM and Web access issue...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hi there,
I would like to seek your counsel with regards to the recent incident that we encountered with our CiscoWorks LMS 3.1 running on Solaris 10.
A few days ago, we received a few complains from our users that they were unable to view the pollers or contents of the TOP-N <CPU | Memory | Interface> Utilization on the HUM’s home page (see attached file, hum_homepage.jpg).
We (tech support guys) checked the pollers’ status and they’re all Active (see attached file, pollers.jpg); we notified our Administrators and requested for a copy of the HUMPortal.log (see attached file, humportal.zip).
The following day, while waiting for the HUMPortal.log, we received reports that users accessing the HUM home page are stuck with the message “loading…” on all TOP-N Utilization reports.
As we were about to re-queue our request from our administrators, we received reports (a few hours ago) that our CiscoWorks LMS is inaccessible via web browser.
We alerted our administrators and they attempted to restart the Daemon Manager (/etc/init.d/dmgmtd); they were able to successfully shut it down but took several attempts to start it up.
As they attempt to start up the Daemon Manager, they encountered the following error message:
# /etc/init.d/dmgtd start
Error: Daemon Management could not start. Trying again
Error: Unable to bind to port, please check port (42340) state and permissions.
Error: If the port is in use, please try starting Daemon Manager once it become free.
After several minutes passed, they were able to start up the Daemon Manager successfully although the CiscoWorks LMS is still inaccessible via web browser.
We requested for a copy of the “pdshow –brief” log and every daemon (as far as I know) seemed to be working fine but it never hurts to ask for help to verify my findings (see attached file, pdshow0818a.log).
As of the moment of this writing, we are still unable to access CiscoWorks LMS via web browser; any insight or suggestion on the next step to take in troubleshooting and eventually solving this problem is very much appreciated.

The port 42340 issue is most likley not related to the HUM issue you described. The latest log entry you provided indicates "Possible reasons for 'No Data' in HUM Portlets could be either Poller is not configured, or Poller is deactivated, or Poller Failure has occurred, or Summarization job did not start." The error is repeated back to the beginning of the file dated Aug 14 16:39.
To focus on the HUM issue:
Did any change occur on or around the 14th that you are aware of?
Please provide some additional debugs:
1. Please enable debug for "UPMProcess"
Log files are stored here: #/var/adm/CSCOpx/log/#
- HUMPortal.log
- upm_summarization.log
- jrm.log
- upm_process.log
2. To set log levels:
*Health and Utilization Monitor > Admin > System Preferences*.
- Select Log Level Settings.
- Select the application module from the drop-down list.
- Select the Debug log level from the Logging Level drop-down list.
Thanks,
Nick

Meeting Place Express 2.1.1.2 Web Access Issue

Hello all,
I'am having an issue with a Meeting Place Express 2.1.1.2 server. There was a power failure and now we can still access the server via dial-in but the web acess is not working. From the CLI i run the mpx_sys status command and it says webservices is active. The server has been restarted. When I check the errorlog I see "unable to connect to webservices, trying again" Anyone know what the issue might be? Thanks
Jason

Hello Hasnain,
Have you tried the recovery procedures below:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express%2C_Release_2.x_--_Troubleshooting_System_Issues#Recovering_the_Password_for_the_root_Account
If that doesnt work, you will need to open a TAC case and TAC will send you a password recovery .iso file to burn on a CD/DVD.
Regards,
Victor Dang.

Cannot scan to e mail - Printer does not wake up - Web access issues

I own the HP 7520 AIO since a couple of months.
Everything was working fine untill 2 weeks ago
After a couple of hours , you cannot print anymore, you have to reset the network connection. Sometimes it works just by reseting the wireless , sometimes you have to go for a printer shutdown , plug out the cord (because you cannot power on again the printer by pressing the power button) and replug. I tried to configure again Wireless connection but I does not solve the issue .
In addition,when I'm trying to access to apps or to scan to e mail from the front panel, I'm getting an error message saying that it is impossible to connect to Web services.
I tried to reset the printer to factory but now it's worst I cannot configure e print anymore at all...
Scan to computer (to Windows) is working all the time (to Mac has never worked from the printer but work from the computer)
I did not change something to the home wireless (router or others) since I first configured the printer.
Could you please help me to solve these issues ?

Hi engte,
Welcome to the HP Support forums. I understand that you are unable to scan to email with your Photosmart 7520 printer and also you are unable to connect to web services.
To reconnect to web services please set a manual IP address and DNS servers. I have included a link to another post I did with the steps (including screen shots). It also sounds like the router may have had a firmware update so I’ve also included the Printer Does Not Maintain Wireless Connection document. There are several valid trouble shooting steps to follow if the manual IP doesn’t correct things.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to allow access from LAN to server on LAN using external FQDN? (Outlook web access issue)

I may have phrased the topic not too clearly, but I have an external domain name of mail.company.com , I want my users INSIDE the company be able to also get to https://mail.company.com , currently they cannot (nothing loads, looks to me as if firewall simply drops it) and I'm drawing a blank on how to get this done. Externally this works fine so if you're outside the company you can load up OWA just fine since my NAT rule translates the external IP to internal IP, but something is blocking this from the inside.
I have an ASA 5510.
If you can just sent me on the right path with theory I'll figure it out on my own, I don't need exact steps, but I must be thinking of this wrong as I'm not getting anywhere.

Hello Martin,
Maybe what is happening is that the DNS entry is pointing to the public IP address of the server, so it could be that the internal users are forwarding the traffic to the public IP address of the server and the ASA will drop the packet since the hosts are going to try to contact the server from the inside when actually there is a NAT rule that translate the internal server on the outside with a public IP. The traffic will try to contact that server going to the outside interface, but the ASA will notice that the connection was initiated on the inside interface, so it will refuse the connection.
There is a solution for this issue. You can create a static NAT rule that matches le that translate the internal host to the public IP address, in this case, instead of -inside,outside-, the rule is going to be -inside,inside-.
For example:
Let`s say that there is a static NAT that match the following statement for the inbound traffic coming on the outside:
static (inside,outside) {public IP} {private IP}
There should be one that says the same but with inside,inside:
static (inside,inside) {public IP} {private IP}
Please configure that rule and let me know the results.
Thanks.
--Armando Rojas

5800 - WLAN web access issues

Hi all,
I have my 5800 connected to my Zyxel Wireless router to access the internet. I can browse and search to a certain point but some links don't go anywhere.
For example, I can browse to the bbc.co.uk site and select sport to bring up the sport homepage, but then clicking on football does nothing. Using 3G accesses the football page fine.
Is there something on my phone or router I need to update? The firewall hasn't got any rules which I have applied.
Richie.

Do you run into this issue with the same page every time? I'm wondering if your wireless session is being disturbed by a phone or other device that's running at 2.4G, which I ran into once.
Lumia 920, Lumia 800
Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

ORACLE PROJECT PORTFOLIO MANAGEMENT INTEGRATION PACK FOR PRIMAVERA P6 & EBS

Hi,
Where can I get the software ORACLE PROJECT PORTFOLIO MANAGEMENT INTEGRATION PACK FOR PRIMAVERA P6 and Oracle E-Business Suite?
Suggest me.
Regards,
Mini

It should be possible. However I will suggest you get in touch with your local sales representative for clarifying licensing policy. It may require you to purchase full license of AIA foundation pack and SOA suite.
Oracle is expected to release new PIP solution for P6 and R12. You may want to wait for that. Search the forum and you will find lot of threads with details.
Sachin

Oracle Business Intelligence Management Pack Webinar

Oracle Business Intelligence Management Pack anchors Oracle’s solution for proactively managing your Oracle Business Intelligence Enterprise Edition environment. Designed and implemented by Oracle’s application experts, the pack provides comprehensive, integrated, and BI EE-specific capabilities that help you achieve better application performance and availability while keeping your application IT operational costs down.
In this webinar, we will present to you the key features of the product, which include:
- Service Level Management
- Configuration Management
- BI EE Component Monitoring
- Synthetic User Monitoring
Date & Time: 1/6/2009, 11 a.m. PST / 2 p.m. EST
Presenter: Amjad Afanah; Product Manager, Oracle Enterprise Manager
Registration: Link
Passcode: application

Hi Muhammad,
What do you mean with BI?. do you forms & rep servers or discoverer.
Anyhow you can download BI separately the contents of BI is as following:
Oracle Business Intelligence Discoverer
Oracle HTTP Server
Oracle Application Server Containers for J2EE (OC4J)
Oracle Enterprise Manager 10g Application Server Control
Oracle Application Server Web Cache
Oracle Application Server Reports Services
Also you can download Forms & report servers separately.
Regards,
Hamdy

Primavera P6 Web access

I have installed primavera P6 web access, so the question is what is:
1- what is the next steps to connect to the database.
Note: the weblogic has been installed, and only run weblogic admin console whenever I run WEBLOGIC SERVER from ORACLE WEBELOGIC
Please help
Edited by: 787159 on Aug 8, 2010 5:11 PM

Hi Laszlo,
the admin users has the right license attached and the other users haven't a license. Just go into the PM-Client under Administration/Users and then the license tab.
Just give the the users who should access the primaveraweb the appropiate license like Project Management, Resource Management, Portfolio Management and they will be able to access the primaveraweb.
Regards
Daniel

Oracle Primavera Certification-Advice Needed

Dear All,
I will like to get your advice on the ffg:
1) Is there any internationally recognized certification for Oracle Primavera?
2) Which of the Oracle Primavera Solutions is the best fit for a person intending to develop career in Construction Company?
3) If Q1 is yes, Whats the Certification Name, The Criteria, How to get enrolled, where to take the exam in Nigeria, the Syllabus etcetera
I will be more than glad to get kind and swift replies.
Regards,
Sam

Dear Sam,
1) Is there any internationally recognized certification for Oracle Primavera?
Yes.
Primavera P6 Enterprise Project Portfolio Management 8 Essentials (1Z0-567) exam is designed for individuals who possess a strong foundation and expertise implementing Project Portfolio Management solutions. This certification exam covers topics on core elements such as: Enterprise Data Structures, Administrative Functions, Portfolio and Project Configuration, in the context of typical use case implementations. Up-to-date training and field experience are recommended.
Successfully completing the requirements of this certification track earns the designation of Primavera P6 Enterprise Project Portfolio Management 8 Certified Implementation Specialist.
2) Which of the Oracle Primavera Solutions is the best fit for a person intending to develop career in Construction Company?
Primavera EPPM 8.2 Web solution is perfect for above requirement. All solutions has to move to enterprise level to cater medium and large construction companies needs
3) If Q1 is yes, Whats the Certification Name, The Criteria, How to get enrolled, where to take the exam in Nigeria, the Syllabus etcetera
http://www.oracle.com/partners/en/knowledge-zone/applications/primavera-p6-eppm-8-essentials-1390777.html
Check above link , you will get topic list. This exam can be given online at Pearsons VUE center ( Check http://www.pearsonvue.com/ for Nigeria centers)
Primavera oracle university conducts the course for this certification but it is bit expensive.
Regards Suhas Jadhal
Jeddah , Saudi Arabia

Guide to Increasing Business Visibility at Oracle Primavera Virtual Summit

Hi everyone,
This year’s Oracle Primavera Virtual Summit: Enabling Financial Discipline, Operational Excellence and Risk Mitigation, is set to help large organizations gain the visibility into project performance needed to drive success. This one-day virtual event takes place on Thursday, June 13th and will be available on demand for a limited time afterwards.
The ability to adapt to change is essential for those carrying out large and complex projects. In an economy unsettled by the recession, today’s organizations are increasingly looking for ways to enhance visibility and help ensure they can continually control costs, identify and mitigate potential risk and increase operational efficiency.
The 2013 Oracle Primavera Virtual Summit is intended to help project managers do just this, showcasing a range of tools designed to help ensure successful project planning and execution – including Primavera P6 EPPM, and Oracle’s cloud-based PPM solutions.
Project Management Professionals who attend the event will be able to earn Professional Development Units for every hour they attend.
You can find out more and register for free here: http://bit.ly/18TaQLA
Thanks! Sarah
#PrimaSummit #EPPM
Edited by: 1006593 on Jun 7, 2013 4:57 AM

Great. The only other setup I would add is if your machine's wired ethernet is ever disconnected, the default setup for OpenSuse 10.2 is to have the interface up when the cable is plugged. In that case, you cannot ping your host if you use static IP address for wired connection and DHCP for wireless. Open YaST, Network Devices. Highlight the wired interface, and select Edit. Then on the General Tab, change the Device Activation from On Cable Connection to At Boot Time.

Oracle Primavera Cost manager v 6.2 web access issue

Similar Messages

Maybe you are looking for