Oracle Process Manager(instance1) Service does not start
Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7
Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Similar Messages
-
Unable to start Oracle Process manager (instance1) service.
When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM -
Oracle Application Testing Suite Service does not start
Hi,
I have installed Oracle Application Testing suite to test web services.I have also installed Jboss 4.0.2 AS. Now wen i m starting the Oracle Application Testing suite Service it gets stopped automatically.I could not open the Load Testing Page.Anyone please help.
Thanks in advance.Hi,
did you get any error during installation?
try to update the jboss server by running 'Update Oracle Application Testing Suite Application Service'.
-Theo -
Opmn service does not start when try to start Oracle BI Services
Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
ThanksMaybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).
-
OracleOraDb10g_home1TNSListener service does not start
I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
ThanksOracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks. -
Windows Web Server W2k8R2sp1 Problem
Eventlog service does not start
- Cause: Java Web Start does not start
-- Cause: Had a virus in "C:\Program Files (x86)\Java\jre1.6.0_03\bin\javaws.exe"
(AVG removed file. Re-installed java in: S:\Java\re1.8.0_31
In registry: file-paths seem to be okay (regedit find: javaws, Java Web Start)
Can't find a solution on-line.
What to do?
It is a dedicated production server managed by remote desktop (Leaseweb.com, ip: [37.48.64.130])
Any help will be highly appreciated.
Thanx in advance,
DickHi Vivian,
Rebooted several times
The point is the event-viewer is not working. Because the eventlog-process is not running/starting. Because JavaWS-process isn't starting
Registry: http://niceware.com/zen/All_registry_20015-03-25_reg.txt
Processes: http://niceware.com/zen/services-2015-03-25_csv.txt
This is some info by SC.EXE:
=========================
CMD in elevated mode:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sc queryex eventlog
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 1068 (0x42c)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc queryex javaws
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc start javaws
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
========
C:\Windows\system32>sc start eventlog
[SC] StartService FAILED 1068:
The dependency service or group failed to start.
========
C:\Windows\system32>sc qc javaws
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 0 IGNORE
BINARY_PATH_NAME : S:\Java\re1.8.0_31\bin\javaws.exe
LOAD_ORDER_GROUP :
TAG : 0
DISPLAY_NAME : Java Web Start
DEPENDENCIES :
SERVICE_START_NAME : LocalSystem
C:\Windows\system32>sc qc eventlog
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
LOAD_ORDER_GROUP : Event Log
TAG : 0
DISPLAY_NAME : Windows Event Log
DEPENDENCIES : javaws
SERVICE_START_NAME : NT AUTHORITY\LocalService
C:\Windows\system32> -
ACS 3.3 - CSAdmin service does not start
Hello all,
I'm running Windows 2003 Server (Enterprise). I installed the eval version of ACS 3.3. The installation process was successful. However, the CSAdmin service does not start. There is an Event Log error that states:
Failed to initialize AAA Client Config Module.
Anyone seen this before?
Let me know if anyone has any suggestions.
Thanks,Saw this and it turned out to be the user had eTrust virus scanning on the server also. Removing that and reinstalling the ACS software fixed it up. Can you check that you don't have that specific software (we may need to file an incompatibility bug), or try removing any other virus/firewalling software that may be causing issues.
-
CiscoWorks Tomcat Servlet Engine service does not start
Hello!
CiscoWorks Tomcat Servlet Engine service does not start.
Events in the Windows Event Viewer:
The CiscoWorks Tomcat Servlet Engine service terminated unexpectedly. It has done this 1 time(s).
output pdshow and file stderr.log, hs_err_pid2128.log attached.
Do you have an idea how to resolve this?
Thanks!The only things which I see are wrong are the start types for the IPM NG database engine and HUM database engine services. They must be set to Manual, not Automatic. However, that would not account for the Tomcat crash. The crash points to an error in the code which processes regdaemon.xml, but I see no reason why that should be failing. As I said before, I think it would be best to open a Service Request. Remote access would be helpful to dig into this problem in more detail.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com -
Inventory service does not start 610 failed login
L.S.
Netware 6.5, SP6
ZEN 7.01SP1IR1
Sybase database
Standalone server
My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
C1, Inventory service object shows 610: database location policy is not configured (but it is)
NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
Any suggestions
Thomas RoesThomasroes,
either of these help?
http://www.novell.com/support/php/se...1%200%20506894
http://www.novell.com/support/php/se...1%200%20506894
Shaun Pond -
Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks! -
Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically
Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie -
Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MDHi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support -
Oracle Agent Service Does not start
My agent service of oracle does not start. It stops immediately after starting.
could you also let me know the role played by agent and listenser service.
I am using windows 2003 server and version of oracle is 9iThe listener is a separate process that runs on the database server computer. It receives incoming client connection requests and manages the traffic of these requests to the database server.
The Intelligent Agents are responsible for the localized execution of tasks and the on-going monitoring of databases and other targets on the managed nodes.Intelligent Agents function independently of the databases and other targets they support.
agntsrvc.log shows any errors that occur during agent startup.
Vinod -
Node Manager installed as service does not start managed servers. WLS 10.3
Hi All,
I have installed the node manager as a windows service. When the service starts up it does start the managed servers.
In the nodemanager.log file it shows that the node manager is reading the startup.properties file for all of the managed servers.
<Jul 24, 2009 6:38:13 AM> <INFO> <Loading domains file: C:\bea\WLSERV~1.3\common\NODEMA~1\nodemanager.domains>
<Jul 24, 2009 6:38:13 AM> <INFO> <Loaded node manager configuration properties from 'C:\bea\WLSERV~1.3\common\nodemanager\nodemanager.properties'>
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <IntegrationServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\IntegrationServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <ProdBackupServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\ProdBackupServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <QAServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\QAServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <INFO> <Plain socket listener started on port 5556, host localhost>
The node manager properties file contains the following
#Mon Apr 20 10:54:45 PDT 2009
DomainsFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
LogLimit=0
PropertiesVersion=10.3
JavaHome=C\:\\bea\\JROCKI~1
AuthenticationEnabled=false
NodeManagerHome=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1
LogLevel=INFO
DomainsFileEnabled=true
StartScriptEnabled=false
StartScriptName=startWebLogic.cmd
ListenAddress=localhost
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=false
LogCount=1
StopScriptEnabled=false
QuitEnabled=false
LogAppend=true
StateCheckInterval=500
CrashRecoveryEnabled=true
LogFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
The managed servers' boot.properties file and startup file are below
boot.properties:
#Thu Jul 23 13:48:26 PDT 2009
CustomTrustKeyStoreFileName=C\:\\bea\\wlserver_10.3\\common\\ssl\\supportTrust2008.jks
TrustKeyStore=CustomTrust
password={3DES}mvtUK8oB8JEiQoVES4AQIQ\=\=
CustomTrustKeyStorePassPhrase={3DES}34+15HRlP6qqpZX3bTPp+Q\=\=
CustomTrustKeyStoreType=JKS
username={3DES}P5mMHiWLnf2UtssZbQtezkDtIS0COiHW
startup.properties:
#Server startup properties
#Thu Jul 23 13:48:27 PDT 2009
Arguments=-Xms1024m -Xmx1024m -Xnohup
JavaHome=C\:\\bea\\jrockit_160_05
SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=0
RestartInterval=3600
BeaHome=C\:\\bea
ClassPath=C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\lib\\itext\\WEB-INF\\lib\\itext.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic_sp.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic.jar;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\massmutual\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\assuritylife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\minnesotalife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\lib\\ltclibrary\\WEB-INF\\classes\\
AdminURL=http\://localhost\:7001
JavaVendor=BEA
AutoRestart=true
AutoKillIfFailed=false
I am wondering if I left out a parameter some where.
Any help would be greatly appreciated.
Thanks,
GregFirst of all, I assume you mean "... up it does NOT start ..."?
It might be helpful to point out that the purpose of the NodeManager is not to start the servers, but to "control" the servers through remote commands. When the NodeManager starts back up, it tries to reset the servers to the last known state it set them to, based on remote commands.
For instance, if your system was running and you stopped the servers through the admin console and then restarted the machine, the NodeManager would not start the servers on machine startup, because the last controlled state of the servers was down. If all of your WebLogic servers were running as a result of NodeManager commands, and you pulled the plug on the box, when you restarted the machine, the NodeManager probably would restart the servers. -
Oracle DBconsole service does not start
Hi,
Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
Thanks for your help.Thank you Madrid. I resolved the problem. I had this :
set ORACLE_SID=ORCL2
C:\Documents and Settings\> emctl stop dbconsole
OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
can anyone answer please ?
Message was edited by:
user522961
Message was edited by:
user522961
Maybe you are looking for
-
Operating System System Model Windows 8 (x64) (build 9200) Install Language: English (United States) System Locale: English (United States) Installed: 1/9/2014 6:06:10 PM Boot Mode: UEFI with successful Secure Boot Hewlett-Packard HP Pavilion g6
-
Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC
Hi, When we try to post good movements in MFBF, the system gives the error message C+099 which says "Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC". We have been implemented the sap notes which are shown below: 000109689
-
Itunes name is showing up with maiden name :(
Can you help me? I can't figure out why the title of my itunes song list is showing up with my old maiden name when my account has my married name, etc. Can you help?
-
Hi experts, When I activate data of ODS.Error happened. Runtime error: SAPSQL_EMPTY_TABNAME exception:CX_SY_DYNAMIC_OSQL_SYNTAX What's the root reason? and how to solve it? Thank you.
-
Hi Experts, I am New to ABAP. Can any one Help me in telling What is SRNO - Number Ranges T.Code? How to Create Number Ranges? How it is useful in SE11. If any one have Material Regarding this T.code Give to me. Thanks in advance.