Oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

Chinu,
What error are you getting?
Have you checked the logs?
The best thing to do is set everything back to the base install, such as RPD and webcat which can prevent presentation services from starting up properly

Similar Messages

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

11.1.2 Oracle Process Manager - start error

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

Oracle Process Manager failed to start(11.1.2)

Hi all!
I've installed and configured 11.1.2 on my VM(Win 2003 SP2)
Then i've been trying to start system but during launching Oracle Process manager I get the following error
Could not start Oracle Process Manage service(ohsInstance3250625901) on local computer
Error 1053: The service did not respond to the start request in a timely fashion
Then i checked Event log
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help?
Regards
Alexander
Edited by: Softperson on 9/8/2010 15:36

Hi Jasmine
I've found a lot of errors in event viewer
Some of them bellow
"The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
Regards
Alexander

Unable to run the oracle Process Manager service

Unable to run the services of
1) oracle Process Manager service(EPM_epmsystem1)
2) Oracle Process Manager (ohsInstance1649849633)
error message is displayed as below.
Error 1053 the service did not respond to the start or control request in timely fashion.
Thanks.

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

How to stop Oracle Process Manager(Instances) ?

Hi,
I have installed OBIEE 11g. For some purpose I tried to stop the Oracle Process Manager(Instances) in services.msc. But it not get stopped its keep showing as stopping.
Is there any command to force shutdown this serives or is there any other way to stop this?
Thanks,
Satheesh

Hi User6787,
I have did what you said? while doing that only I got that issue.
What Saichand told worked well.
Thanks,
Satheesh

Issue with Oracle Process Manager

Hi All,
I've installed Hyperion Planning on one server few days back. Now i've installed HFM on other server. The shared services is common which i've given is the First server (Where Planning is installed). The Planning server is working fine. When i'm trying to start Oracle Process Manager in the second server (Where HFM is installed) it is giving the message as "Could not start the Oracle Process Manager EPM_epmsystem1 service on Local computer" and The System cannot find the path specified.
I've installed & configured WebLogic on both servers (Planning & HFM)
Is this service required for HFM ? I think it is for Essbase. correct me if i'm wrong. Do we need to run this service on the second server ? (HFM Server). What is the main purpose of this server. Pls. advice.
Thanks,
PVR

Hi John,
Thanks so much for the Reply. As i mentioned earlier i've 2 servers. First server is for Planning and the second server is for HFM. I would like to use the shared services for both Planning & HFM on the first server. For launching workspace, if i type http://firstserver:19000/workspace, i can see Planning. To see HFM, do i need to launch http://firstserver:19000/worksapce or i need to launch http://secondserver:19000/workspace. I'm thinking that HFM will be available by launching http://secondserver:19000/workspace URL instead of the first URL, but i did't find the option of Configure webserver in the second server (HFM server). Pls. advice
Also, while configuring i've given other database for Reporting and Anaysis instead of the existing database. Also, given the server as second server (HFM server) during the configuration of Reporting and Analysis. Can you pls. kindly help and advice with the situation i've mentioned here
Thanks,
PVR

Oracle Process Manager gone after applying patch set 10.1.3.4.0

Hi everyone,
I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
Exception
Operation failed because:
Domain creation error.
An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
I was using SOA suite 10.1.3.0 and it was working properly before upgrade. Now, I can see the version of BPEL Console has changed to 10.1.3.4.0 and still I can login to Enterprise Manager and ESB conole properly but I missed BPEL Console somehow.
I ran the setup from patch set and selected the Oracle Home for my soa suite 10.1.3.0 and continue the rest of installation. I don't know where I did mistake.
I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
Thanks
Esfand

This forum is for 11g. Try asking your question on the SOA Suite forum here
SOA Suite
Heidi.

Oracle Process Manager(instance1) Service does not start

Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7

Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp

Cannot find the OAS Oracle Process Manager Service

Hi guys!
Somehow when I installed the OAS, I couldnt find the Process MAnager Service. I always have to restart it manually. And when I log out it stops...what should I do?
Appreciate anyone's help..
Thanks

Do not have the service interact with the desktop or run as a user. Ensure to start the service from the services.msc window.

Oracle Process Manager doesn't start anymore - orageneric11.dll

Hi,
we have an OPMN installed as standalone for containing Oracle Data Integrator 11 agent. All was fine until a technical maintenance that reinstalled the antivirus and some other stuff.
Now when i try to start OPMN service it fails and in the event log i see a "orageneric11.dll no found, try reinstalling the software".
Have you got any idea about what happened?
Thanks in advance

Just reinstalled sw

Oracle Process Manager (epm_epmsystem1) service

HI,
After install of 11.1.2 this service was created and was running without any problem . SS were running either. After i finished all the config the service refused to start again. I tried reconfig but no hope. Either SS are not running but all other applications can run smoothly.
When running SS i got:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
Can you please help
lubos

Hi,
I have found the installation on 11.1.2 very temperamental it will either go to plan or something will go wrong.
If you want to access just shared services then you should only need to start up the foundation managed service.
It can take a while for the service to get up and running depending on the system you are running it on.
If it does not work then you may have to reconfigure the foundation elements.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle process manager

Similar Messages

Maybe you are looking for