Oracle Quality Module - Collection Plan name

The collection Plan name field in Orcale quality module - collection plan form (QLTPLMDF) does not accept special characters. Why is this so and what is the rationale behind this?
Here is the wording from Oracle Quality user Manual
Collection plan names can include alphanumeric characters and spaces. Collection
plan names can have up to 30 characters, and the first 25 characters must be
distinctive. The only special characters that can be included in a collection plan name
are the underscore (_) and the single quotation mark (’). any special
I am working with a customer who wants to use decimals (Example: 35.24.101) so that search will be easier. Some screens does not allow searching by description so need to have these in the collection name/code
Any solution you can think of?
Thanks

Hi,
When you create the collection Plan , actually you are creating the name of the table with required column names as collection elements in the data base.
This is the reason you are not allowed to do so as per your query.
thanks,
Raja

Similar Messages

Is there APIs for Oracle Quality Module - Collection Plan, Specifications ?

We are converting Collection Plan, Specifications etc and was wondering whether there exists API?
Thanks

I have found packages to create Collection Plans (QA_PLANS_PUB) and Specifications (QA_SPECS_PUB). Both allow you to add elements to the Plan or Spec.
However, both assume that the Collection Element already exists so that it can be added to the Plan or Spec. And I can't find an API or package to create the Collection Elements. Does such a package exist?

Multiple Receiving Quality Collection Plans

I am trying to setup collection plans to capture results when receiving a PO. I am able to see only 1 collection plan and i don't see my new collection plan, is there any profile option or setup to enable multiple receiving collection plans ?
Thanks,
Aarti

Hi,
We have an OPM template ( TEMPLATE OPM RECEIVING INSPECT ) from which you have to build your own collection plan.
I have some old notes from the past which I will share with you here.
RECEIVING INSPECTION AND OPM QUALITY AND COLLECTION PLAN ERROR DEBUGGING INFORMATION
     Steps Required Prior to Executing Test
1.     In Oracle Quality, new Quality collection elements and collection plan have been seeded.
2.     In Oracle Inventory, item is Process Quality enabled.
3.     In OPM Quality System Parameters, set Lot Optional to Yes and Delayed Lot Entry to No.
4.     In OPM Quality, optionally set up an OPM sampling plan for incoming inspection.
5.     In OPM Quality, create an approved item specification and a supplier specification validity rule associated with the sampling plan.
6.     a) In Oracle Quality, create a collection plan (e.g. call it OPM RECEIVING INSPECTION and copy elements from the seeded collection plan from 1 above called TEMPLATE OPM RECEIVING INSPECT ) with seeded collection elements that correspond with the OPM Quality sample group.
The Collection Plan will be setup by the end-user with Collection Triggers so that, only for specific conditions allowed by the collection triggers for the Inspection transaction, will this collection plan be applicable during RCV Transaction (aka enabling)
.e.g. for Quality Collection Transaction. ‘Inspection Transactions (Oracle Purchasing) set up Collection trigger of ‘Item’ Condition ‘equals’ and From value of ‘9010’.
7.     After the plan has been copied over, please verify if all the elements and actions are correctly copied over. The details of elements and actions are listed out in the Technical Design document for reference. For example, verify that actions for assigning a value to the Sample Disposition Code, Quantity, Inspection Result are present. Verify that the Action on Inspection Result for Accept and Reject are correct etc. Please verify the element settings such as Mandatory-flag, read-only flag etc are as per the Technical Design document .
8.     Also, navigate to Quality à Setup à Collection Elements form and verify the Sample Disposition Code seeded element is correctly seeded – Refer to Technical Design document for reference.
9.     In Oracle Quality, the profile option QA: PO Inspection set to “Oracle Quality” instead of “Oracle Purchasing”.
10.     In Purchasing Receiving Options, set Receipt Routing to ‘INSPECTION REQUIRED’
User Implementation Guide consideration for Receiving Inspection.
1. It is recommended that the total receipt line quantity be recorded as either the amount of material accepted or rejected based on the final sample group disposition, since partial quantities typically do not apply to Process items.
i.e If the Inspection result is “Accept” then Accepted Quantity must be equal to Quantity and Rejected Quantity must be zero. If the Inspection result is “Reject” then Rejected Quality must be equal to Quantity and Accepted Quantity must be zero.
2. With reference to the ‘Reject the Input’ action with an error message to prevent recording inspection when sample disp is Pending or Cancel etc., there is one point to note, viz. - When you have a ‘Reject the Input’ action, there is a corresponding error message this column is not a Translated column.. Hence the Quality Manager who manages collection plans setup, can alter this message content to suit their needs as appropriate during implementation.
3. It was also clarified that in Oracle Quality, user can enter more than one row of result in the collection plan. In the OPM scenario, most of the times, user will enter only one row of result and this is the recommendation.
4. To ensure that the tie-up between the quality records and the sample inspection in the OPM data model for future usage is operative, then please make sure that Oracle Alerts sub-system in functioning.
Debgging information
1. If get error
APP-QA-16135: Quality Results cannot be entered because no Collection Plans apply" in the Receiving Transaction form.
a,. Add a transaction named "Inspection Transaction" to this plan
b, . Don't setup a spec for this collection plan in Oracle Quality - so under the Specification pushbutton, the 'No specifications used' radio button will be selected
2. Is the receiving option receipt routing set to ‘Inspection required”
3.The design does not allow for accept or reject of partial quantities – is the ct using partial quantities ?
4.This is a one shot deal on the collection plan entering of quality results. Is the ct trying to re-enter results in the collection plan again?
5. Receiving inspection requires the sample group to be at a final disposition. Is the customer using single sample, sample groups or multi-sample sample groups when this occurs? Is the automatic single sample disposition workflow set to auto or manual?
Because neither the quantity or sample result is being picked up, maybe the sample group for the sample(s) is not at a final disposition. This may explain why this is being regarded as intermittent.
6. Note bug 5300577
Once a sample or sample group has been assigned a final disposition of Accept, Accept with Variance, Reject, or Cancel, it should not be updateable to another disposition. Please check what is the customer's scenario that allows them to change from the Reject disposition to Accept with Variance. Are they entering a second sample against the same receipt and sample group as the first sample? Or perhaps the second sample belongs to a different sample group than the first sample?
7. To clarify . When you open the screen to enter results in Oracle Quality, it will reflect whatever is the current sample group disposition that corresponds to the item/receipt. I believe collection plans in Oracle Quality only allow data to be entered and saved once. After this point, the user cannot go back to this screen from Oracle Purchasing. If the user does not save any data, then s/he can re-enter the form multiple times and see the up-to-date sample group disposition automatically populated.
8. In Oracle Quality, user can enter more than one row of result in the collection plan. In an OPM scenario, most of the times, user will enter only one row of result.

AME Line Level Approval -- Oracle Quality

Hi All,
In Oracle Quality module I have create one parent plan and a child plan is associated with it. After multiple lines are entered in the child plan (Approver details is stored as one of the collection result in this plan) and later when the parent plan is saved, line level AME approval based on the approvers in the child plan should initiated. The final e-signature status should be at the header level, such that once all the lines have been approved i.e. parallely approved, the header record status should change to "APPROVED".
I had tried the header level approval approach, but in this case the approval flow for approvers could be done, but the only issue is that it was done serially.
Is there a way to achieve this in AME? Kindly help.
Thanks.

Apologies for the late response, have only just spotted the question.
You will need to register "line-item job-level chains of approval" under payables transaction type before you can select it from the picklist:
Setup\Action Types\"Use Existing Action Type" button, then select action type and continue.
Hope this helps (if you haven't already resolved yourself)
James

Quality Collection Plan Data Interface in Oracle Apps 11i

Hi All,
I want to Know is there any Public API available for Create and import Collection Element.
Thanks in Advance
Nikunj

Quality Collection Plan is a module in Oracle Applications - this is not a Java programming question.
If you want to know if there is a Java API to import data into a collection plan, this is still not a Java question, it is an Oracle Applications question.

Oracle Quality: Need a way to copy and paste collection plan records

Hi,
We use a Quality collection plan, along with a few child plans, to store inspection requirements. The user wants to be able to copy an existing plan record and paste to a new record for further updates. Any good ways to accomplish that?
Please advice. Thanks!

Hi,
User want this functionality during the transaction or when updating collection plan results in Quality result?
Ashish

Quality collection Plan for OM processing

Hi Gurus,
My client wants to implement Quality module while shipping the products to customer.
If we implement Quality module how to attach the Quality collection plan result to respective sales order after updation of Quality result in Quality module.
How to check the details in sales order form of this result?
Regards
AL

Hi,
Collections Plans can be enabled at RMA receiving if the Item attribute "RMA Inspection Required" is set to yes.
Define the collection plan Type as "Receiving Inspection" and set the following profile
QA:PO Inspection to Oracle Purchasing.
Thanks
-Arif.

Personalize Quality collection plan form

Dear Expert,
currently we are implementing R12.1.3 in one of the client.
Client requirment is to personalize Oracle quality collection plan --Enter Result form. for specific collections.
Is it suggestable to personalize that form for that collection plan as the form is global for all collection plan.
Please suggest.
Thanks,
Atul Ramteke

Hi;
I suggest please review:
Master Note For Collections [ID 1147234.1]
http://docs.oracle.com/cd/E18727_01/doc.121/e13612/T240092T240190.htm
Regard
Helios

Oracle 11i - Collection Plans (Discrete Manufacturing)

In Oracle Quality, Collection Elements can use SQL validation code to provide a LOV for data entry into a Collection Plan.
Collection Element values can also be determined using SQL code that includes using Token field values for data already entered into the current Collection Plan (e.g. JOB) as part of the query. However, the result of this query must be a unique value.
Can anyone tell me if its possible to use Token fields from Collection Elements already entered into a Collection Plan as part of the validation code to display a LOV?
I cannot see any way to do this.
Thanks
Edited by: user11340385 on Dec 17, 2012 11:29 AM

Thanks Peter,
I'm a newbie and it got posted there by accident.
I did notice this afterwards but then couldn't find somewhere for "EBS Discrete Manufacturing".
What's the best place for it and can it be moved there without me resending it?

Quality Collection Plan assignment

Hi All,
I'm just trying to assign a collection plan to a particular user.
What i did is
1. Created collection plan
2. Add the user login to the User group
3. Grant privilege of the collection to the user group
But the collection plan is not available in the user login
Am i missing anything????

Hi,
Collections Plans can be enabled at RMA receiving if the Item attribute "RMA Inspection Required" is set to yes.
Define the collection plan Type as "Receiving Inspection" and set the following profile
QA:PO Inspection to Oracle Purchasing.
Thanks
-Arif.

How could the Oracle Application Module Browser collect all the interfaces?

How could the Oracle Application Module Browser comes with the Oracle AS Adapter collect all the interfaces that are available through Oracle Integration Repository? Is it from the XML description file in the Oracle Integration Repository?
Thanks,
Qing

Did you ever figure this out? I'm encountering the same issue.
Thanks.

Is there any seeded graphical report available in OPM quality module.

Dear All,
I have two queries in OPM quality module.
1.Is there any seeded graphical report available in OPM quality module?
2.Is there anything like Collection plans of collecting multiple elements and doing an analysis based on the Collected elements in OPM quality?
We need to map these two requirements for a OPM customer.
please send your comments.
Thanks
Suresh

Dear Aditya
To my knowledge, there is no such report and need to go for Customization. Hopefully what you asked is simple report which is possible to customize.
Regards
Raj

Oracle Hyperion Capital Asset Planning

Please can anyone tell me the differences between oracle hyperion capital asset planning and oracle e-business suite Fixed Asset module.
and also the utility of versions in oracle hyperion capital asset planning? is version related to workflow and approval process?
please share your opinions...

Hyperion Public Planning and Budgeting is a type of Planning application... you have to download total suite now....
Have a look for the files for 11.1.2.3:
More to life than this...: EPM 11.1.2.3 Installation and configuration changes
You can use Rapid installation as well if you want:Rapid Deployment
For 11.1.2.2:More to life than this...: EPM 11.1.2.2 Installation
And for features , you can look below:
http://www.oracle.com/us/solutions/business-analytics/performance-management/business-planning/hyperion-public-sector-planning-budgeting/overview/index.html
Cheers!
Sh!va

Dynamic Modification Rule In Quality Module

Dear All
Please explain me in detail how to use Dynamic Modification Rule (At Lot Level) In quality Module.
Thanks & Regards
Rahul Bhardwaj

Hi,
Dynamic Modification Rule
Definition
The basic data record contains the definition of the inspection stages, the dynamic modification time (at lot creation or after the usage decision has been made), and the conditions for the inspection stage change. Inspection stage changes occur on the basis of the inspection results that are recorded for inspection lots and inspection characteristics (that is, on the basis of their acceptance or rejection).
Use
You can vary the inspection scope using dynamic modification rules. You can store a dynamic modification rule in one of the following places:
In the inspection plan at the header level
In the inspection plan at the characteristic level
In the inspection setup of the material master record at the inspection type level
Structure
A dynamic modification rule contains the definition of the inspection stages, the dynamic modification time, and the conditions that lead to an inspection stage change.
There are always two options that apply to the conditions for an inspection stage change: An acceptance (OK) and rejection (not OK). The system uses these conditions to update the quality level, which always reflects the current status.
The functions for maintaining and displaying dynamic modification rules are primarily contained on three screens:
On the initial screen, you enter the identifier for the dynamic modification rule.
On the header data screen, you maintain a short text and the blocking indicator, and define the time of dynamic modification (at lot creation or when the usage decision is made) and the reset period.
The reset period defines the period of time, which must elapse before the quality level again uses the initial inspection stage specified in the dynamic modification rule as the current inspection stage.
On the inspection stages screen, you edit the inspection stage data (inspection severity, skip, initial inspection stage, and short text). You create the rules for the inspection stage change on this screen.
In QM, the inspection stage describes a test or inspection status that is based on the inspection history and predefined rules. Different inspection stages mean that there are also different inspection scopes and/or inspection severities.
Creating a Dynamic Modification Rule
1.Choose Logistics ® Quality management ® Quality planning ® Basic data ® Sample ® Dynamic modification rule ® Create.
2.Enter the identifier for the dynamic modification rule on the initial screen or choose Copy to use an existing dynamic modification rule as a copy model.
3.Choose Dynamic modification rule to carry out the following activities on the header data screen:
Edit the short text for the dynamic modification rule.
Define the time of dynamic modification (at lot creation or usage decision).
Define the reset period.
Set the blocking indicator if you want to prevent the dynamic modification rule from being used in an inspection plan.
4.Choose Next screen to carry out the following activities on the inspection stages screen:
Define inspection stages.
Define inspection severities for individual inspection stages.
Identify skips.
Identify the initial inspection stage.
Maintain short texts for the inspection stages.
5.Choose Stage change to carry out the following activities on the screen for creating the inspection stage change:
Define the specifications for a stage change for an acceptance (OK)
Define the specifications for a stage change for a rejection (Not OK)
6.Choose Next screen to return to the inspection stages screen and save your entries.
When you save the data, the system prompts you for a confirmation. If you want to include the dynamic modification rule in the allowed relationships for sampling procedures and dynamic modification rules (this is only necessary if a sampling procedure is used in a sampling scheme), you can switch directly to the assignment transaction by confirming this prompt. You define the assignment of sampling procedures and dynamic modification rules in this screen.
If you do not confirm the prompt, the system returns directly to the initial screen and confirms that it has created the dynamic modification rule.
Hope this helps.
Award points if useful.
Regards,
Tejas

CRS10g patchset을 적용한 이후 Veritas SF Oracle RAC 관련 MODULE

Problem Description
다음은 SF(Storage Foundation) Oracle RAC를 구성하기 위하여 Oracle CRS
PATCHSET 등을 적용하기 전에 SF Oracle RAC Veritas libraries 를 ORACLE_HOME에 설치해야 한다는 내용입니다.
또한, ORACLE CRS 패치 Version 을 올리면서 Veritas 쪽 관련하여 필요한
Veritas skgxp module 등이 설치 과정에 빠져 있거나 Veritas library file들이 overwrite되어 에러를 만나는 경우를 볼 수 있습니다.
이런 관점에서 Veritas storage foundation 을 설치하고 oracle CRS stack을
설치 또는 갱신하는 과정에서 만날 수 있는 에러에 대해 원인 및 해결방안을 알아봅니다.
에러 증상
다음은 CRS 10.2.0.3.0 Patchset이 설치되면서 Veritas library가 overwrite 되면서 발생하는 에러임.
Veritas clusterware 5.0 not recognized by Oracle due to the fact that Veritas libraries over written with crs 10.2.0.3.0 patchset installation.
The cssd.log shows:
[ CSSD]2007-11-08 03:28:02.603 [5] >TRACE: clssnm_skgxnmon: skgxn init failed,
rc 1 [ CSSD]2007-11-08 03:28:02.603 [1] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor [ CSSD]2007-11-08 03:28:02.604 [1] >TRACE:
clssnmNMInitialize: misscount set to (30), impending reconfig threshold set to
(26)
The cssd.log should show this
[CSSD]2007-09-20 14:14:06.008 [5] >TRACE: clssnm_skgxninit: initialized
skgxn version (2/0/Veritas Cluster Server MM <<== USING VERITAS SKGXN LIBRARY
Changes
CRS patchset 의 installation 이후에 Veritas library file들이 overwrite되는 문제 발생.
Explanation
Environment :
Oracle Server - Enterprise Edition - Version: 10.2.0.3.0
OS : Solaris Operating System (SPARC 64-bit)
이 예제는 sun os에 근거함.
OS에 따라 해결책이 약간 다를 수는 있습니다.
원인
새로운 CRS patch 관련 변경이 있은 이후에 Veritas SFRAC 관련 module이 인식되지 못하는 문제 야기됨.
Installing and Configuring SF Oracle RAC Software
Veritas 에서 제공하는 Storage/Clusterware 관련한 절차는 이 문서에서 생략합니다.
Install CD 안의 installsfrac 스크립트 수행 session 에서 RAC software installation을 하는 과정이 들어갑니다.
Veritas가 제공하는 SF Oracle RAC 5.0 installation 문서를 보면 다음과 같은 내용이 포함되어 있습니다.
아래 내용에는 SF Oracle RAC component 들을 설치하는 과정만 기술합니다.
# cd /cdrom/storage_foundation_for_oracle_rac
# .installsfrac -configure
Note: Do not run root.sh yet, but return to the installsfrac session from step 15.
19 In the installsfrac session, press Return. The installsfrac utility now verifies
the database software installation, copies the SF Oracle RAC libraries to $ORACLE_HOME, and relinks Oracle on each node in the cluster.
다음은 위와 같은 installsfrac 스크립트를 수행한 이후에 Installer가 5.0 SF Oracle RAC library file들을 ORACLE_HOME으로 Copy하는 과정이고, Oracle library file들을 relink합니다.
자세한 절차는 다음의 site에서 step 별로 확인을 할 수 있습니다.
http://ftp.support.veritas.com/pub/support/products/DBE_Advanced_Cluster_for_Oracle_RAC/288502.pdf
[ 참조 ]
Performing Post-upgrade tasks for SF Oracle RAC 5.0 MP1.
To Relink Oracle 10g R1 or R2 using the installer.
installsfrac를 invoke하기 위해 다음과 같이 stage가 있다고 가정하고 invoke를 합니다.
# cd /opt/VRTS/install
# ./installsfrac -configure
Oracle environment information verification 과정입니다.
Oracle Unix User : oracle
Oracle Unix Group : oinstall
Oracle Clusterware (CRS) Home: /app/oracle/orahome
Oracle Release: 10.2
Oracle Patch Level: 0.1
Oracle Base: /app/oracle
Oracle Home: /app/oracle/orahome
Is this information correct: [y,n,q] (y)
Verifying binaries in /app/oracle/orahome on galaxy ...ok
Verifying binaries in /app/oracle/orahome on nebula ...ok
Copying SFRAC libskgxn on galaxy ......................ok
Copying SFRAC libskgxn on nebula ......................ok
Copying SFRAC ODM library on galaxy ...................ok
Copying SFRAC ODM library on nebula ...................ok
Copying SFRAC libskgxp on galaxy ......................ok
Copying SFRAC libskgxp on nebula ......................ok
Relinking Oracle on galaxy ............................ok
Relinking Oracle on nebula ............................ok
Oracle Relinking is now complete.
Solution Description
Article
http://seer.entsupport.symantec.com/docs/288502.htm
다음은 CRS patchset 적용 후, 문제 해결 위해 Oracle 10g 를 manual 하게 relink하는 과정입니다.
방법1. Relinking Oracle 10g (Using the command line)
[ 10g R1 ]
For Oracle 10gR1, enter one set of the following commands
a. For 32bit oracle:
# cp /opt/VRTSvcs/rac/lib/libskgxn2_32.so
/opt/ORCLcluster/rac/lib/libskgxn2.so
$ cp /opt/VRTSvcs/rac/lib/libskgxp10_ver23_32.so
$ORACLE_HOME/lib32/libskgxp.so
$ ln -s /usr/lib/libodm.so libodm10.so
b. For 64bit oracle:
# cp /opt/VRTSvcs/rac/lib/libskgxn2_64.so
/opt/ORCLcluster/rac/lib/libskgxn2.so
$ cp /opt/VRTSvcs/rac/lib/libskgxp10_ver23_64.so
$ORACLE_HOME/lib32/libskgxp.so
$ ln -s /usr/lib/amd64/libodm.so libodm10.so
[ 10g R2 ]
For 10gR2, enter one set of the following commands:
a. For 32bit oracle:
# cp /opt/VRTSvcs/rac/lib/libskgxn2_32.so
/opt/ORCLcluster/rac/lib/libskgxn2.so
$ cp /opt/VRTSvcs/rac/lib/libskgxp10_ver25_32.so
$ORACLE_HOME/lib32/libskgxp.so
b. For 64bit oracle:
# cp /opt/VRTSvcs/rac/lib/libskgxn2_64.so
/opt/ORCLcluster/rac/lib/libskgxn2.so
$ cp /opt/VRTSvcs/rac/lib/libskgxp10_ver25_64.so
$ORACLE_HOME/lib32/libskgxp.so
방법2. Relinking Oracle10g (Installer)
위 Article에서 Relinking Oracle 10g after upgrading SF Oracle RAC 부분을 참조하여 해결하는 것도 가능합니다.
여기서 2개의 node name이 galaxy 와 nebula 라고 가정합니다.
1. Invoke installsfrac once again:
# cd /opt/VRTS/install
#./installsfrac -configure
2. Enter the system names when prompted:
Enter the system names separated by spaces on which to configure
SFRAC: galaxy nebula
3. Navigate to the "Install and Relink Oracle" menu.
a. Select the appropriate Oracle 10g version (3):
1) Oracle 10gR1
2) Oracle 10gR2
b. Select "Relink Oracle" (3) from the menu:
1) Install Oracle Clusterware (CRS)
2) Install Oracle RDBMS server
3) Relink Oracle
b) [Go to previous menu]
c. From the menu displayed, enter the required information. For example:
Enter Oracle UNIX user name: (oracle) oracle
Enter Oracle UNIX group name: [b] (oinstall) oinstall
Enter Oracle base directory: [b] /app/oracle
Enter absolute path of CRS Home directory: [b] /app/crshome
Enter absolute path of Database Home directory: [b] /app/oracle/orahome
Enter Oracle Bits (64/32) [b] (64) 64
d. Confirm your responses in the verification screen. The installer copies the SF 5.0 Oracle RAC libraries to /opt/ORCLcluster, where it expects libskgxn.
Oracle environment information verification
Oracle Unix User: oracle
Oracle Unix Group: oinstall
Oracle Clusterware (CRS) Home: /app/crshome
Oracle Release: 10.2
Oracle Bits: 64
Oracle Base: /app/oracle
Oracle Home: /app/oracle/orahome
Is this information correct? [y,n,q] (y)
galaxy
Copying /opt/VRTSvcs/rac/lib/libskgxn2_64.so
/opt/ORCLcluster/lib/libskgxn2.so ........... success
nebula
Copying /opt/VRTSvcs/rac/lib/libskgxn2_64.so
/opt/ORCLcluster/lib/libskgxn2.so .............. success
galaxy
Copying /opt/VRTSvcs/rac/lib/libskgxp10_ver25_64.so to
/app/oracle/orahome/lib/libskgxp10.so ........... success
Removing /oracle/10g/lib/libodm10.so ............ success
Linking /opt/VRTSodm/lib/amd64/libodm.so /app/oracle/orahome/
lib/libodm10.so ... success
Setting permissions oracle:oinstall /app/oracle/orahome/lib/
libskgxp10.so ... success
nebula
Copying /opt/VRTSvcs/rac/lib/libskgxp10_ver25_64.so to
/app/oracle/orahome/lib/libskgxp10.so ........... success
Removing /oracle/10g/lib/libodm10.so ............ success
Linking /opt/VRTSodm/lib/amd64/libodm.so /app/oracle/orahome/
lib/libodm10.so ... success
Setting permissions oracle:oinstall /app/oracle/orahome/lib/
libskgxp10.so ... success
e. Enter "q" at the next prompt to leave the installer now that CRS setup
tasks are complete.
4. Bring the CSSD resource online. Enter:
# hares -online cssd -sys galaxy
# hares -online cssd -sys nebula
5. Confirm that CRS in online. Enter:
$CRS_HOME/bin/crs_stat -t
6. Bring online the oracle resources configured under VCS. If they're directly controlled by CRS, you may run the CRS commands to start the instance.
[ 참고 ]
CRS patch 적용 이후에 HP server와 Veritas 환경에서 CRS stack 이 올라오지
않는 경우를 추가 설명해 봅니다.
참고로, Veritas 쪽에서 Node status를 check해 주는 tool을 제공하고 있고,
CRS의 init.cssd 에서 그 tool을 사용하도록 init.cssd 에 patch가 되어야 한
다는 내용의 문서가 있습니다.
그 작업을 위한 patch를 역시 Veritas에서 제공하고 있습니다.
CRS patchset 이나 CRS 를 위한 cumulative patch를 하기 전에 SFRAC 를 위해
init.cssd에 patch를 적용해야 합니다.
Symptoms
1. postrootpatch.sh hangs when apply a patch[set]
2. prerootpatch.sh hangs when rollback a patch[set]
자세한 사항은 다음의 문서에서 안내하고 있습니다.
http://seer.entsupport.symantec.com/docs/281875.htm
Late Breaking News (LBN) - Updates to the Release Notes for Veritas Storage
Foundation (tm) and High Availability Solutions 5.0 and 5.0 Maintenance
Pack 1
on HP-UX 11iv2 and cross references to product documentation
환경
Veritas on HP server
이 patch 는 HP-UX 11i 에만 해당함.
예방책
Before you run the root.sh script, you need to add the init.cssd.patch.
a. Open another window on the system where you are running the installer
b. Log in as superuser
c. Change to the directory where the patch is to be copied:
For Oracle 10gR1:
# cd $CRS_HOME/css/admin
# cp /opt/VRTSvcs/rac/patch /init.cssd-10gR1.patch .
For Oracle 10gR2:
# cd $CRS_HOME/css/admin
# cp /opt/VRTSvcs/rac/patch /init.cssd-10gR2.patch .
d. Run the following command to install the patch:
For Oracle 10gR1:
# patch < init.cssd-10gR1.patch init.cssd
For Oracle 10gR2:
# patch < init.cssd-10gR2.patch init.cssd
e. Run the root.sh script. For example:
# cd $CRS_HOME
# ./root.sh
This starts the CRS daemons on the node where you enter the command.
References
http://ftp.support.veritas.com/pub/support/products/DBE_Advanced_Cluster_for_Oracle_RAC/288502.pdf
http://ftp.support.veritas.com/pub/support/products/DBE_Advanced_Cluster_for_Oracle_RAC/283979.pdf
http://seer.entsupport.symantec.com/docs/281875.htm
<Note:467753.1> Title : Veritas clusterware 5.0 not recognized by Oracle
due to the fact that Veritas libraries over written with crs 10.2.0.3 patchset installation

Oracle Quality Module - Collection Plan name

Similar Messages

Maybe you are looking for