Oracle RAC Cluster Health Monitor on Windows 2008 R2 64Bit

Hello colleaques,
i run a 2-node RAC Cluster 11.2.0.2 64Bit on Windows 2008 R2 64bit. I did installl the Berkeley DB Version 4.6.21 succesfully.
After that i installed the crfpack.zip (CHM) as described in the README.txt.
F:\Software\ClusterHealthcheck\install>perl crfinst.pl -i eirac201,eirac202 -b F:\BerkeleyDB -m eirac201
Performing checks on nodes: "eirac201 eirac202" ...
Assigning eirac202 as replica
Installing on nodes "eirac202 eirac201" ...
Generating cluster wide configuration file for eirac202...
Generating cluster wide configuration file for eirac201...
Configuration complete on nodes "eirac202 eirac201" ...
Please run "perl C:\"program files"\oracrf\install\crfinst.pl -f, optionally specifying BDB location with -b <bdb location> as Admin
user on each node to complete the install process.
F:\Software\ClusterHealthcheck\install>c:
C:\Users\etmtst>cd \
C:\>cd "Program Files"
C:\Program Files>cd oracrf
C:\Program Files\oracrf>cd install (on both nodes as described in the README.txt)
C:\Program Files\oracrf\install>perl crfinst.pl -f -b F:\BerkeleyDB
01/30/12 16:42:21 OracleOsToolSysmService service installed
Installation completed successfully at C:\"program files"\oracrf...
C:\Program Files\oracrf\install>runcrf
01/30/12 16:44:03 StartService(OracleOsToolSysmService) failed:(1053) The service did not respond to the start or control request i
n a timely fashion.
01/30/12 16:44:03 OracleOsToolSysmService service started
It says here OracleOsToolSysmService was started, but it was not !!!
Manual starting gives the same error. !!!!
Please has anybody had the same problem ??
regards and greetings, Abraham

There will be a new version of the Standalone CHM/OS for Windows that will work with 11.2.0.2 and earlier versions available on OTN in the near future. The older version that you are using has not been tested and due to the infrastructure changes in 11.2 it is not expected it will work. The integrated CHM/OS that is included as part of the 11.2.0.3 GI installation does work as does the new GUI (CHMOSG) now available for download.

Similar Messages

Oracle Cluster Health Monitor on Windows

Hi experts
I looked in the forum but found no answers, so I'm begging for help...
I'm trying to install OCHM on a 2-nodes RAC.
Windows 2003 Enterprise Edition SP2, 32 bits
Oracle 10.2.0.5 Standard Edition, 32 bits.
The two servers are named S92 and S20. Master node will be S92.
I logged as admin on the first node (S92) and created C:\Program Files\oracrf\
I unzipped the file crfpack-winnt.zip in the directory :
C:\>dir "C:\Program Files\oracrf"
Le volume dans le lecteur C n'a pas de nom.
Le numéro de série du volume est EA56-2A94
Répertoire de C:\Program Files\oracrf
30/09/2011 09:25 <REP> .
30/09/2011 09:25 <REP> ..
30/09/2011 09:25 <REP> admin
30/09/2011 09:25 <REP> bin
30/09/2011 09:25 <REP> install
30/09/2011 09:25 <REP> jdk
30/09/2011 09:25 <REP> jlib
30/09/2011 09:25 <REP> log
30/09/2011 09:25 <REP> mesg
0 fichier(s) 0 octets
9 Rép(s) 32 268 705 792 octets libres
I added Oracle's perl path in %PATH% and lauched the installer, but i received an error :
C:\>path
PATH=D:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
C:\>perl "C:\Program Files\oracrf\install\crfinst.pl" -i S92,S20 -b "D:\oracrfdb" -m S92 -N CRSPP
You cannot install nodes from standalone UI install.
Try running install nodes operation from full OS Tool Infrastructure zip (crfpack.zip).
I don't find any crfpack.zip on Oracle website.
What have I done wrong ?
Thanks,
Laurent
Edited by: user6188981 on 30 sept. 2011 00:45

The CHM product underwent a transformation in 11.2. Previously it was known as IPD/OS. However, I don't think CHM works on Windows for 11.2.0.1 or 11.2.0.2. I did mention this confusion to the OTN admins previously, and it looks like they might have created a special ZIP file for Windows named [crfpack_winnt.zip|http://download.oracle.com/otndocs/products/clustering/ipd/crfpack-winnt.zip] . I suggest following the instructions here ( [http://www.oracle.com/technetwork/database/enterprise-edition/ipd-readme-130657.pdf?ssSourceSiteId=ocomen|http://www.oracle.com/technetwork/database/enterprise-edition/ipd-readme-130657.pdf?ssSourceSiteId=ocomen] ) and keeping your fingers crossed.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

Oracle Cluster Health Monitor

How many people use the Oracle Cluster Health Monitor and is it recommended?
http://www.oracle.com/technetwork/database/clustering/downloads/ipd-download-homepage-087212.html
According to the FAQ it is integrated into 11.2.0.2 - Cluster Health Monitor (CHM) FAQ [ID 1328466.1]

I would look in the installation directories for an HTML file for the documentation. One of the download ZIP files for CHM contains a file named chm_os_useman.html. I don't know if this is the same file that might exist in your installation, but it is worth a look.

Cluster Health Monitor/crfgui

Hi all,
After successful installation of CHM I cannot connect to my cluster via crfgui tool (from Windows
to Linux).
Cannot connect to Loggerd on "scan-name".
.. reason: Connection context invalid .. Pooling for connection to Loggerd on "scan-name".
Please help
P.S I already read the
"http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-
monitor/"
thanks Levi :)
and my G.I version is 11.2.
OS OEL5.7
*[root@rac2 rac2]# /etc/init.d/init.crfd status*
OSysmond running with PID=3327.
OLoggerd running with PID=3552.
oproxyd running with PID=3639.
*[root@rac2 rac2]# netstat -anp | grep 3639*
tcp 0 0 192.168.7.68:61027 0.0.0.0:* LISTEN 3639/oproxyd
udp 0 0 127.0.0.1:36850 0.0.0.0:* 3639/oproxyd
udp 0 0 127.0.0.1:20909 0.0.0.0:* 3639/oproxyd
unix 2 [ ACC ] STREAM LISTENING 15016 3639/oproxyd /var/tmp/.oracle/srac2DBG_PROXY
unix 3 [ ] STREAM CONNECTED 15015 3639/oproxyd

Hi,
The GUI (released only to 11.2.0.1) is independent of the CHM version shipped with Oracle Grid Infrastructure. However and right now, there is unfortunately no ETA when the GUI will be available for the integrated CHM 11.2.0.2 or higher (11.2.0.3 for example, once out). The GUI is optional as far as CHM and its purpose is concerned, although it is useful.
What's command line you are using to connect GUI on your CHM? Your are using Public IP or SCAN IP?
Levi Pereira

Cluster Health Monitor Links not working

Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank you

user7002963 wrote:
Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank youThats right, i tried and its not working.
Possible workaround: Call oracle global support. You'll get the link in google.
Or
Raise an SR with support.oracle.com if you have valid CSI
The latest copy of Cluster Health Monitor (IPD/OS) is always with the install image if the version is 11.2.0.2 or greater

Cluster Health Monitor install

Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advance

sami wrote:
Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advanceit was unable to acces the file crfinst.pl
had better use/try like this c:\"Program Files\oracrf\install\crfinst.pl"
instead of "program files" use double quotes until the filename it will access
try it.

Monitoring Microsoft Windows 2008 Active Directory by a remoted Agent

Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?
Thanks
Dominik

Dominik wrote:
Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?I think , you can monitor it . Please check :
Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
How to Install the Microsoft Active Directory Plugin for Grid Control R2 [ID 359621.1]
Regards
Rajesh

Can we install Oracle Database 10g 32 bit on Windows 2008 64bit

Can we install Oracle Database 10g 32 bit on Windows 2008 64bit will there be any disadvantages, will all the features of Oracle database work ( Like Data Guard , OEM, Grid Control).
Solution will be appriciated.

Hi,
If it is true can you please give me some reference doc, as per my knowledge installing Oracle Database 10g 32 bit on Windows 2008 64bit must be possible.
Thanks & Redards

Error installing Oracle 10.2.0.4 on windows 2008 r2

Hi,
I am trying to installing SAP netweaver 7.01 server on oracle 1.2.0.4 in Windows 2008 64-bit system.
But when I try to install oracle I get this error.
Checking operating system version: must be 5.1 or 5.2. Actual 6.0
I did search on sdn at the pam matrix it should be possible. And according to OSS note 1326698 it is supported on Windows 2008.
Any help?
Reza

Hej Bhavik,
Are you Installing Enterprise Edition of Oracle 10.2.0.4 64bit ?
Yes I am installing ORACLE-10.2-rdbms 64bit.
Administrator user is in use for performing the Installation ?
Yes Administrator user is in use
I Check the PAM at http://service.sap.com/pam.
Also refer this SAP Note 1303262 - Oracle on Windows Server 2008 along with the Installation Guide.
Yes I did refer to note 1303262.
I did fundet Note 980426 - Oracle 10.2 Software installation on new operating systems from a link you give me.
There is 4 workaround but I do not know this can help me.
I make a copy of installation cdu2019es on my server and I try to install oracle from there.
I want to try workaround 3 from sso notes: I download RUNINSTALLER.ZIP file.
But I can not find RUNINSTALLER on my installation file.
It is first time I am installing Oracle bd.
Any help?
Reza

Which Oracle client to use? with CRS2008 on Windows 2008 R2 64bit

Hi,
We are setting up a standalone Crystal Reports 2008 Server on Windows 2008 R2 64bit. This server will serve some reports that will pull data from an Oracle 11g DB. Several Oracle 10g/11g, (32bit or 64bit) DB client has been tried, but CRS cannot connect to the oracle DB using any of them. Which oracle client is known to be working well on this setup?
CRS 2008 <> Windows 2008 R2 64 bit <> Xeon E5600 series machine
Thanks,
Steve

Hello,
CRS2008 v1 supports Oracle 9.2, 10g R1, 10G R2 and 11g R1.
The client to use on those version are the same as the server meaning if you have a 11g R1 server then you can use an Oracle Net Client 11G R1. But you can use also a JDBC, ODBC, OLEDB Oracle 11G R1.
If you have a CRS2008 v0, then Oracle 11G is not supported. Only 9.2, 10g R1 and 10G R2.
I hope this will help you
Regards,
Philippe

EM is not running for Oracle 10.2.0.5 on windows 2008 R2

Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia

70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful.

Why do we use reverse proxy for Oracle RAC Cluster setup

Hello All,
I got this question lately.. "why do we use reverse proxy for Oracle RAC Cluster setup". I know we use the reverse proxy at Middleware level for multiple security reasons.
Thanks..

"why do we use reverse proxy for Oracle RAC Cluster setup".
I wouldn't. I wouldn't use a proxy of any sort for the Cluster Interconnect for sure.
Cheers,
Brian

Cluster SQL 2012 on Windows 2008 R2

Hi
Presently, i have a cluster SQL 2012 on windows 2008 R2 (2 nodes), i need to add a new server in cluster.
My question, it's possible to add WINDOWS 2012 SERVER with SQL 2012?
(2 nodes with Windows 2008 R2, 1 node with Windows 2012 and all nodes with SQL 2012)
If yes, do you have a link that
confirms this?
Thanks

No. This is not possible. Microsoft Windows Cluster required all the Member Nodes to have same OS to the Same version level. Even you cannot use Windows Server 2008 on one node with Windows Server 2008 R2 on another node.
Thanks and Regards Alankar Chakravorty MCITP Database Administrator SQL Server 2008 MCITP Database Administrator SQL Server 2005

Install Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit

Hi All,
Good Morning. I am working as Oracle APPS DBA. I had a requirement for installing Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit machine.
I need this Application server for Vertex O-Series which is working with SQL Server as the database.
Can any of you guys help me in providing the document or steps in order to install this application server?
1. Pre-Requisties steps
2. Installation
3. Post steps
I apperciat your help in this.
Thanks,
Srinivas.

Hello.
We are at the same point too.
Anybody here install the Vertex O series 6 running on the Java Stack? if so, what NW release and what component?
We are currently running an older version on SAP NW640 JAVA with no issue, and I am making the assumption the new Vertex would be running on the same SAP java AS for 7*... maybe not?
The install documents from Vertex say the requirement for SAP is:
"SAP NetWeaver 7.1 with Service Pack 3 or higher" and I see that there is only 7.1 for PI and Mobile.
(Maybe they mean SAP NW 7 SP3?)
We did ask Vertex, the company, about running this on the java app and they wrote:
"Netweaver 7.1 is currently supported for deployment of O Series 6.0. Versions 7.0 and 7.3 of Netweaver are not supported.
O Series 6.0 is supported for use with Java 1.5 and Java 1.6. "
Thanks for your help. And I will post here again if I find my answer.

Oracle RAC Cluster Health Monitor on Windows 2008 R2 64Bit

Similar Messages

Maybe you are looking for