Oracle rac install in win 2003/2008

hai friends
can anybody give me link /pdf/screenshots of install and configure oracle database 10g in 2003/2008 win domain
( i have five systems in same configuration)
your quick response will be highly appreciated
regards

Plz check the below page, let me know it works for you or not.
http://dbmentors.blogspot.com/p/11g-racdb.html
Regards
Inam Bukhari
http://dbmentors.blogspot.com

Similar Messages

Oracle IDM Install on Windows 2003

Hey all...
I am trying to install OIM 9.1.0.1 on a windows server 2003 and having some trouble. I have the Oracle database installed and configured and prepped for the OIM install as per the documentation. I am using the JBoss App server and have that up and running as well.
I have Java JDK 1.6.0.16 installed. During the install, it says the JDK version is unsupported. After viewing the readme, I see that JDK 1.6.0.10 is supported. Not sure if this is what's causing me an issue.
I get all the install screens until I get to the screen where I provide the application server and Java JDK directories. I enter the directories and hit next and then the installer just sits there. No error messages, no response whatsoever.
I was hoping someone could help me figure out what I am doing wrong. Does the installer just fully reject the latest JDK and fail?
Any help would be greatly appreciated.
Thanks in advance.
Bryan

Check the compability matrix for your OIM version for JVMs. If Java 1.6 isn't supported that might be your issue.
A lot of things in OIM is built on ancient java constructs so it is not impossible that something finally got deprecated.
Best regards
/Martin

Installing Oracle 11gR2 32bit on Win 2003 R2 server virtualized in Hyper-v

I have here 2008 server 64bit with Hyper-V and inside the virtualized server 2003 R2 32bit to install oracle!!
The installation goes normal but in the end when you create the database the following message appears:
ORA-03113 end-of-file on communication channel error
or
ORA-12560: TNS: protocol adapter error
These machines are all in domain
Hyper-V with 3 GB
Logged in with administrator privileges
NONE put in the file sqlnet.ora
Forgot something?
Can anyone help?
Thanks

Thank Madrid
I'm using DBCA tool!
It is the moment of creation of database errors that occur!
Looking at the documentation under +'Check the Software Requirements'+
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support
Is it so complicated to install oracle in Hyper-V?
Is there anything else that might help?
Thanks

Oracle 10g install on Windows server 2008 R2 ( 6.1 )

Hi All,
I am trying to install Oracle 10g over windows server 2008 R2 (6.1) but it gives error that OS is not supported. I tried to install below version.
Oracle Database 10g Release 2 (10.2.0.4.0)
Enterprise/Standard Edition for Microsoft Windows Vista x64, Windows Server 2008 x64,
Microsoft Windows Server 2008 R2 x64, Windows 7 x64
But it fails with error that OS version 6.1 is not supported. On download page it is written to get 10.2.0.5 patch from My Oracle support for windows server 2008 R2, I got patch p8202632_10205_MSWIN-x86-64 but it requires a pre-installed oracle home.
So how should I install Oracle 10g as 10.2.0.4 does not get installed and the patch asks for a previous install?
The reason I am installing Oracle 10g is that our Java application is running in production over JDK 1.4 and Oracle 11g does not provide JDBC driver for JDK 1.4, is there any JDBC driver for Oracle 11g that can work with JDK 1.4?
Thanks in advance for help.
Best Regards!
Irfan

Please find below last lines of logs:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.server_EE
INFO: Starting Prerequisite checks : Sun Mar 11 09:16:16 PDT 2012
INFO: Checking CertifiedVersions
     This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
     This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Not executed <<<<
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
     This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 4094MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectIfDHCPAssignedIP
     This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.1.87.20
INFO: Checking the network interface display name.... :Intel(R) PRO/1000 MT Dual Port Network Connection
INFO: Checking the network reference name..... :eth4
INFO: Checking the platform .......233
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CheckPathEnvVariableLength
     This is a prerequisite condition to test whether the PATH environment variable is within the allowable character limits. On Windows XP and Windows 2003, the maximum character allowed is 8191. On Windows 2000, NT and 98, the limit is 1023 characters.
INFO: Checking Oracle home from the env... :C:\oracle\product\10.2.0\db_1
INFO: Checking Path from the env... :C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
INFO: Max path length for OS:Windows Vista is... :8191
INFO: *****************************
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleBase
     This is a prerequisite condition to test whether the environment variable 'ORACLE_BASE' is set as a subdirectory of the Oracle home
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :C:\oracle\product\10.2.0\db_1
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectAnyInvalidASMHome
     This is a prerequisite condition to test whether the system has been cleaned properly.
INFO: Checking the platform .......233
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
INFO: Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Sun Mar 11 09:16:17 PDT 2012
SEVERE: Some required prerequisite checks have failed. Please make sure the system meets all the requirements before install can proceed.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: recdelete: C:\oracle

ORA-04031-----capture aborat in stream in oracle 10g R2 in win 2003

Hi Experts,
Error Message ORA-04031: unable to allocate 116 bytes of shared memory ("streams pool","unknown object","streams pool","kolcalm coll")
I got this message for capture ABORTED. my sga_target and sga_max as 1880M. Do I need to increase their size? stream pool size as 880. shared_pool_reserved_size as 14M.
Based on oracle document for this error message:
Action: If the shared pool is out of memory, either use the dbms_shared_pool package to pin large packages, reduce your use of shared memory, or increase the amount of available shared memory by increasing the value of the INIT.ORA parameters "shared_pool_reserved_size" and "shared_pool_size". If the large pool is out of memory, increase the INIT.ORA parameter "large_pool_size".
Key point: we use asm to control. it include share_pool and large_pool. Do we need to increase share pool size?
Or we need to take other steps to handle this point.
Thanks for help!!
regards
Jim
Edited by: user589812 on Nov 24, 2008 9:02 AM

Sorry. I use Oracle 10GR2 in window 2003
For you sql results as
STREAMS_POOL_SIZE_FOR_ESTIMATE STREAMS_POOL_SIZE_FACTOR ESTD_SPILL_COUNT ESTD_SPILL_TIME ESTD_UNSPILL_COUNT ESTD_UNSPILL_TIME
272 .1828 66034094 49261 72443892 114732
424 .2849 56899900 42916 69761439 110546
576 .3871 29490067 17904 56631824 87657
728 .4892 23989724 13951 55330937 85704
880 .5914 20168762 11552 54131928 83935
1032 .6935 16931737 9668 52998667 82269
1184 .7957 14147340 8134 51948431 80724
1336 .8978 11706951 6797 51052796 79408
1488 1 9679293 5687 50314492 78322
1640 1.1022 8051240 4800 49768913 77520
1792 1.2043 6747253 4087 49361033 76921
STREAMS_POOL_SIZE_FOR_ESTIMATE STREAMS_POOL_SIZE_FACTOR ESTD_SPILL_COUNT ESTD_SPILL_TIME ESTD_UNSPILL_COUNT ESTD_UNSPILL_TIME
1944 1.3065 5699093 3515 49064019 76483
2096 1.4086 4829584 3040 48850903 76171
2248 1.5108 4089840 2638 48682591 75923
2400 1.6129 3425461 2278 48542520 75717
2552 1.7151 2815554 1949 48417853 75535
2704 1.8172 2267859 1648 48297317 75357
2856 1.9194 1865779 1427 48178756 75183
3008 2.0215 1678078 1315 48063018 75014
3160 2.1237 1637930 1277 47943171 74838
I am waiting for your help!
JIm

Oracle 11G Install on Win 7 With PL/SQL Developer Help Needed

Today is my first day with Oracle. I have tried to Install Ora11g from our network drive.I think the installation went fine. I also installated PL/SQL Developer when i try to log in i got the following error see below.
PL/SQL Developer - (Not logged on)
Initialization error
SQL*Net not properly installed
OracleHomeKey: SOFTWARE\ORACLE
OracleHomeDir:
OK
After i did some research online i found this solution "go to Tools > Preferences > options set manually "Oracle Home" to the folder of ORACLE_HOME and "OCI Library" to the oci.dll file located in ORACLE_HOME/bin/oci.dll"
C:\app\user\product\11.2.0\client_1\bin.dll <=== I believe this is my Oracle_Home
C:\app\user\product\11.2.0\client_1\bin\oci.dll <==== Is my OCI Library.
When i apply thse 2 paths i get the following error.
Initialization error
COuld not load " C:\app\user\product\11.2.0\client_1\bin.dll
OCIDLL forced to C:\app\user\product\11.2.0\client_1\bin.dll
LoadLibrary(C:\app\user\product\11.2.0\client_1\bin\.dll)returned 0
Can someone help me with this ???????????????/

Pl indicate which version of Win 7 - you will need Professional or higher - Home versions are not supported/certified, so things may or may not work as expected.
http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE
HTH
Srini

Oracle not installing in WINDOWS 2003 SERVER

I cound not able to install oracle 10g in windows 2003 server. But its working fine in windows xp. I dont know for what reson its not installing. Once autoexec.exe is started, Its showing a black screen with please wait...... But after
10seconds its disappearing . Kindly help me. It says its DEP (DATA EXECUTION PREVENTAION) some thing like that.

It's a Windows "issue", not Oracle :
http://support.microsoft.com/kb/875352
Nicolas.

9i (r2) RAC install on Win 2k.

Hi,
Is it possible to build a "cheap" Win 2k 2 node RAC environment (similar to the linux environment built using firewire at http://otn.oracle.com/pub/articles/hunter_rac.html).
If not what are the options?
Thanks,
john

Hello,
You can always load VMWare on your windows machine (single hard drive) and then load Linux after creating a new VM. Then you can load RAC on Linux OS. I hope you are not planning to use this architecture for a production system :) .
Regards
Prakash

Oracle Not installing on Win 2k

Hey Gang,
Working on Win 2K SP 2.
IBM NetVista, P-IV 1.4Ghz
Tried to install client of Oracle 8.1.6i, when clicking on autorun or setup.exe, I get the hourglass for about 5 seconds then stops with no install. I have two machines that are doing this.
Any help in this big world?
Ciao!!!

The Oracle 8* universal installer will not run on a P4 unless your aquire the patched version, but oracle9i will work just fine on the P4...This also includes patches... As a work around in some situations the Oracle9i universal installer can be linked to the product.jar and initialized..."I have used this to patch 9i in order to install the 9iAS w/portal on the P4...

Oracle 10g install on Windows 2003 Server 32-bit

As far as I can tell there doesn't appear to be an Oracle10g download for 10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1 for Windows then apply the patch to bring it up to 10.2.0.4. Am I seeing this correctly or am I missing something?
Thanks!

>
As far as I can tell there doesn't appear to be an Oracle10g download for
10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
for Windows then apply the patch to bring it up to 10.2.0.4.
Am I seeing this correctly or am I missing something?
>
Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
http://wiki.oracle.com/page/Patchset+Number+Overview
Perhaps you also ought to go through this {message:id=3251402}
Regards,
Phiri

ORACLE 8i - Install on win 98

I downloaded this product and installed as minium. I do this because my machine freezes when the installer tries to create an instance. I went into DOS and ran the "ORADIM" command to set up database. I check the register and all is I prescribed in that setup. I then set Oracle_SID to equal my database. I then go server manager and get thrown out saying that it cannot open registry software\oracle\home0\sid_list
starting with default sid. then it blows up
Any way to help?
Thanks
andy

have you tried increasing the quota for the registry..
In NT there is something called registry size...I would increase that see if that helps..
Look for something similar on Window98.
and increase the size of maximun registry size..
good luck.
Shah

Oracle 8i install on Win ME - invalid staging area?

I'm having trouble installing 8i Personal Edition on Win ME
(Athlon 1.3, 768 ram, plenty of disk space). I get the
error "Invalid staging area. There are no top level components
for Windows 95 available for install from this staging area." on
the "File Locations" step of the pre-install process. Anyone
know what this may be caused by?

Edit your win.ini file
In the [Compatibility 95] section add the following:
Jrew=0x00080000
Save the file and reboot your machine..
Now you will be able to install Personal 8i for windows 98 on
windows ME

Oracle 9i install on Win XP

While attempting to install 9i, I get the following error: Java Runtime Environment was not found at...hence the orcale Universal Installer cannot be run. Install JRE 1.3.1 or higher. I have completely uninstalled that the OS and have tried several times to install the 9i software. I get the same error inspite of my efforts...any suggestions.

double click autorun.exe in the autorun folder.

RAC install on windows 2003 EE, intel xeon processor (x64)

hello
After i install clusterware i try run
runcluvfy stage -pre dbinst -n rac2,rac4 -r 10gR2
on
"checking node application existance..."
get
The application has failed to start becouse MSVCR71.DLL was not found. Re-installing the application may fix the problem.
any sugestion?
can i continue installation?
Thanks in advice

i resolve the problem puting in environment PATH=%PATH%;C:\Program Files (x86)\Compaq\Cpqacuxe\bin
but i dont know that is correct?
i have 5 diffrent files of MSVCR71.DLL

Installing RAC on Win 2003 R2 StdEdt x64, OracleCSService issues ?

Hello,
First, I have to say this is my first cluster with Oracle products. Our enviroment has two HP DL380 G5 with Emulex dualport adapters, everything connected over two SAN switches to HP EVA4400. We have shared disk and that disk is visible from both nodes. We have configured heartbeat as well as public network. Here comes first question:
1. What is exact way hosts files needs to be setup in Windows enviroment? I am using this:
192.168.1.1 node01.company.intern node01
192.168.2.1 node01-priv.company.intern node01-priv
192.168.1.100 node-vip.company.intern node01-vip
and all this for node02 ...
Furtner, our Oracle versions are 10.2.0 and I am using document named:
Oracle RAC Install
Oracle Database 10g Release 2
(patchset 10.2.0.3) with
Microsoft Windows 2000/2003
32bit / 64bit
Using RAW for Oracle Clusterware files
and ASM for Oracle Database files
for instalaltion.I am geting to the point here:
Output generated from configuration assistant "Oracle Clusterware Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call D:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: node1 node1-priv node1
node 2: node2 node2-priv node2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk1
Format of 1 voting devices complete.
Step 1: checking status of CRS cluster
Step 2: creating directories (D:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
tehnolog1 service OracleCSService in improper PENDING state, err(0)
tehnolog2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Clusterware Configuration Assistant" failed
The "D:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Also, we are having this error:
03/13/09 16:58:11 : (4720) : QueryDosDeviceAll: buffer was filled with 8063 bytes
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive0
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive1
03/13/09 16:58:11 : (4720) : Found disk PhysicalDrive2
03/13/09 16:58:11 : (4720) : The count = 4
03/13/09 16:58:11 : (4720) : The signature is 0x3a9d3a9c
03/13/09 16:58:11 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:11 : (4720) : The count = 4
03/13/09 16:58:11 : (4720) : The signature is 0x1
03/13/09 16:58:11 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:11 : (4720) : The count = 24
03/13/09 16:58:11 : (4720) : The signature is 0x97b0d827
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 16:58:11 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : Created Link:ocrcfg Device:\Device\Harddisk2\Partition1
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : Created Link:votedsk1 Device:\Device\Harddisk2\Partition2
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:11 : (4720) : c:\ is on:NTFS
03/13/09 16:58:11 : (4720) : d:\ is on:NTFS
03/13/09 16:58:12 : (4720) : QueryDosDeviceAll: buffer was filled with 8079 bytes
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive0
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive1
03/13/09 16:58:12 : (4720) : Found disk PhysicalDrive2
03/13/09 16:58:12 : (4720) : The count = 4
03/13/09 16:58:12 : (4720) : The signature is 0x3a9d3a9c
03/13/09 16:58:12 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:12 : (4720) : The count = 4
03/13/09 16:58:12 : (4720) : The signature is 0x1
03/13/09 16:58:12 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 16:58:12 : (4720) : The count = 24
03/13/09 16:58:12 : (4720) : The signature is 0x97b0d827
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 16:58:12 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 17:07:35 : (4720) : QueryDosDeviceAll: buffer was filled with 8505 bytes
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive0
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive1
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive2
03/13/09 17:07:35 : (4720) : Found disk PhysicalDrive3
03/13/09 17:07:35 : (4720) : The count = 4
03/13/09 17:07:35 : (4720) : The signature is 0x3a9d3a9c
03/13/09 17:07:35 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 17:07:35 : (4720) : The count = 4
03/13/09 17:07:35 : (4720) : The signature is 0x1
03/13/09 17:07:35 : (4720) : Number of partitions (4) less than or equal to 4
03/13/09 17:07:35 : (4720) : The count = 24
03/13/09 17:07:35 : (4720) : The signature is 0x97b0d827
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition1, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition2, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition3, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition4, err 1005
03/13/09 17:07:35 : (4720) : Failed to read volume information for \Device\Harddisk2\Partition5, err 1005
03/13/09 17:07:35 : (4720) : The count = 1
03/13/09 17:07:35 : (4720) : The signature is 0x1
03/13/09 17:07:35 : (4720) : Number of partitions (1) less than or equal to 4
Since I am behind schedule with this installation any help is more then welcome !
Where to look :-)?
Best regards,
damiri
Edited by: dimamovic on Mar 14, 2009 12:13 AM

Hello,
i'm currently facing very similar symptoms installing 11gR1 on Windows 2008 EE x64 (SP2). did you solve your problem and if yes how ?
txia

Oracle rac install in win 2003/2008

Similar Messages

Maybe you are looking for