Oracle RAC on 2 Microsoft hyper-v VMs

Is it possible to setup a test Oracle RAC env on 2 Microsoft Hyper-v VMs like you can using VMware?
I have setup a VMWare test Oracle RAC env following http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php and was hoping this could also be done with Microsoft Hyper-V.
Thanks,
Steve

I would speculate that this certification matrix mainly applies to a situation of installing Oracle RAC on Hyper-V VMs running on separate physical hosts using some sort of "true" shared disk. At this time, I am mainly trying to investigate the possibility of running a "test" low-cost Oracle RAC on a single Hyper-V physical host running 2 Linux VMs. If possible the shared disk wouild just be some sort of pseudo disk setup in Hyper-V shared between the VMs running on the physical hosts. I know this is possible with VMWare. I believe it is also possible with OracleVM (but have not tried OracleVM myself). The place I am currently working is using Hyper-V to run their virtual hosts and I was hoping that the "cheap" Oracle RAC Test environment using VMs could also be implemented with Hyper-V.
Thanks,
Steve

Similar Messages

  • Oracle RAC 11G Configuration on windows server 2008 Using Hyper V

    Hi,
    I want to implement 2 node RAC with CENTOS As my virtual machine using microsoft Hyper V.
    I am confused about this ip setup Especially private and VIP.
    Can anyone help on this please
    Thanks,
    Vinodh

    Yes thanks for the reply. i did that yesterday with Oracle VM and i am almost finished with my setup.
    Found this article on net which has clear explanations. If someone need this it they can use this.
    http://www.lab128.com/rac_installation_using_vb/article_text.html
    Anyway once i fully complete this setup will close this thread until then in case of doubts i will update here.
    Thanks,
    Vinodh

  • Disable Intel CPU Hyper threading in Oracle RAC environment

    Dear Expert,
    Does disable CPU hyper threading will have direct impact or maybe unexpected behavior to Oracle RAC database?
    Actually the background of this question is we have many received packet queuing on the network layer waiting to be processed. Investigation leads to the processor utilization which shows that many processor are still in idle state or not used when the other processors are busy processing incoming request.
    I have visited some oracle note like
    CPU Count Consideration for Oracle Parameter Setting When Using Hyper-Threading Technology (Doc ID 289870.1)
    Oracle and Hyper-Threading (Doc ID 205089.1)
    Using PROCESSOR_GROUP_NAME to bind a database instance to CPUs or NUMA nodes (Doc ID 1585184.1)
    These document already give useful information but i wonder if there is any possibilities risk or another consideration of disabling cpu hyper threading.
    Please let me know if any other information required.
    Thanks.
    Best Regards,
    Jolly

    As far as I know it is set as cpu architecture and mobile chips don't have the option. Not 100% as I've never needed to do it.
    Better bet would be to check Intel ark and forums with them I expect.

  • OBIEE 11g in Microsoft Hyper-v

    Hi everyone
    1.- Oracle support Obiee 11g on Microsoft Hyper-V?
    2.- Oracle support Obiee 11g on VMware?
    Please help me.
    thanks
    Regards
    Pedro

    Just to backup what Brian is saying and to question xploda's advice.  Hyper-V can easily run more virtual CPUs (total number of CPUs assigned to VMs) than are physically available on the host.  That's one of the primary reasons behind virtualization
    - get better utilization of your physical resources.  The host does not reserve any CPU for itself, and you can't reserve specific CPUs for specific VMs.  The hypervisor takes care of scheduling the CPU and memory across all processes needing access
    to them.  To say that Hyper-V won't be effective with two 4-cpu VMs on an eight-CPU host is questionable.  That would be making the assumption that every single CPU is 100% utilized, which rarely, if ever, happens.  People love virtualization
    because it enables them to take servers that were only using part of the available CPU resources and consolidate them with other servers not fully utilizing their CPU resources.  Add them together on another machine to get better overall utilization.
    .:|:.:|:. tim

  • SAP Oracle Support for VM and Hyper V

    Dear Friends,
             We are planning to do Up gradation and implementation for below application with Oracle Database.
    SAP ECC 6.0 additional application server
    SAP Portal Development system
    SAP Portal Quality system
    SAP BI Development system
    SAP BI Quality system
    Documentation Server /SAP CONTENT SERVER 6.30
    SAP Solution Manager 7.1 EHP1 Development System
    SAP Solution Manager 7.1 EHP1 Quality System
    Which virtualization is suitable for us.? Hyper v or VM
    VM does not support from orcle,Still some customers are using.Is it advisable to us VM?
    Hyper V supports sap with orcle?
    Or can we install all application on 1 single Operating System?
    Thanks a lot in Advance
    Regards,
    Snehal Patel

    Thanx Deepak,
            As per Note 1329848
    All Oracle products (incl. Oracle Database 11.2.x, Oracle RAC 11.2.x, Oracle Client 11.2.x) certified to run on Windows Server 2008 R2 with Service Pack 1 or Windows Server 2012 are also certified to run on these Operating Systems when running as virtual machines under Windows Server 2012 with Hyper-V, whether used in a private cloud or public cloud (including Windows Azure) environment, subject to the exceptions and additional information identified below.
    List of Microsoft Windows Server 2012 Hyper-V guest OSes includes:
    Windows Server 2012
    Windows Server 2008 R2 Service Pack 1
    Oracle Linux 6.4
    As   1173954 - Support of Oracle for VMWare
    Oracle has not certified any of its products on VMware virtualized environments. Oracle Support will assist customers running Oracle databases on VMware in the following manner: Oracle will only provide support for issues that either are known to occur on the native OS, or can be demonstrated not to be as a result of running on VMware.
    Still Some Customers are using .Is it Advisable to use VM?
    One more option proposed by partner:
    All  DEV/QAS servers for portal,BI,Solman on single server without any VM on Single is Advisable?
    Regards,
    Snehal Patel

  • What is the Oracle equivalent of the Microsoft Access FIRST function?

    Using: Oracle 10gR2 RAC on SUSE Linux 9 (10.2.0.3)
    In the process of converting a Microsoft Access database to Oracle, an Access query is using the FIRST function.
    What is the Oracle equivalent of the Microsoft Access FIRST function?
    In the attempt to convert, the Oracle FIRST_VALUE function was used. However, the same results was not achieved.
    Thanks,
    (BLL)
    Query:
    h2. ACCESS:
    SELECT
         TRE.GCUSNO,
         UCASE([DCUSNO]) AS DCUSNO_STD,
         *FIRST(UCASE([DNAME])) AS DNAME_STD*,
         *FIRST(UCASE([DADDR])) AS DADDR_STD*,
         *FIRST(UCASE([DCITY])) AS DCITY_STD*,
         TRE.DSTATE,
         FIRST(TRE.DZIP) AS DZIP,
         TRE.DREGN,
         TRE.DDIST,
         TRE.DSLSMN,
         TRE.DCHAIN,
         TRE.MARKET,
         TRE.MKTPGM,
         TRE.EUMKT
    FROM
         TRE
    GROUP BY
         TRE.GCUSNO,
         UCASE([DCUSNO]),
         TRE.DSTATE,
         TRE.DREGN,
         TRE.DDIST,
         TRE.DSLSMN,
         TRE.DCHAIN,
         TRE.MARKET,
         TRE.MKTPGM,
         TRE.EUMKT;
    h2. ORACLE:
    SELECT DISTINCT
    TRE.GCUSNO,
    UPPER(TRIM(TRE.DCUSNO)) AS DCUSNO_STD,
    UPPER(TRIM(TRE.DNAME)) AS DNAME_STD,
    UPPER(TRIM(TRE.DADDR)) AS DADDR_STD,
         FIRST_VALUE(UPPER(TRIM(TRE.DNAME)) IGNORE NULLS) OVER (ORDER BY TRE.GCUSNO) AS DNAME_STD,
         FIRST_VALUE(UPPER(TRIM(TRE.DADDR)) IGNORE NULLS) OVER (ORDER BY TRE.GCUSNO) AS DADDR_STD,
         FIRST_VALUE(UPPER(TRIM(TRE.DCITY)) IGNORE NULLS) OVER (ORDER BY TRE.GCUSNO) AS DCITY_STD,
    TRE.DSTATE,
    TRE.DZIP,
    FIRST_VALUE(UPPER(TRIM(TRE.DZIP)) IGNORE NULLS) OVER (ORDER BY TRE.DZIP ASC) AS DZIP,
    TRE.DREGN,
    TRE.DDIST,
    TRE.DSLSMN,
    TRE.DCHAIN,
    TRE.MARKET,
    TRE.MKTPGM,
    TRE.EUMKT
    FROM CRM.TREUP100R TRE
    GROUP BY
    TRE.GCUSNO,
    UPPER(TRIM(TRE.DCUSNO)),
    TRE.DNAME,
    TRE.DADDR,
    TRE.DCITY,
    TRE.DSTATE,
    TRE.DZIP,
    TRE.DREGN,
    TRE.DDIST,
    TRE.DSLSMN,
    TRE.DCHAIN,
    TRE.MARKET,
    TRE.MKTPGM,
    TRE.EUMKT;

    A slight correction to odie's post. I think you want min not max to replicate the Access first function, but see below to be sure. So:
    min(upper(trim(tre.dname))) keep (dense_rank first order by tre.gcusno) as dname_std
    user10860953 wrote:How does one ignore null values?The min and max functions will ignore nulls automatically, so if there is a null value in tre.dname, it will not be be returned, unless all of the values are null. For example:
    SQL> WITH t AS (
      2     SELECT 65 id, 'ABCD' col FROM dual UNION ALL
      3     SELECT 37, 'DEFG' FROM dual UNION ALL
      4     SELECT 65, 'DEFG' FROM dual UNION ALL
      5     SELECT 65, null FROM dual UNION ALL
      6     SELECT 70, null FROM dual UNION ALL
      7     SELECT 70, null FROM dual UNION ALL
      8     SELECT 37, 'ABC' from dual)
      9  SELECT id,
    10         MIN(col) keep (DENSE_RANK FIRST ORDER BY id) min_dname_std,
    11         MAX(col) keep (DENSE_RANK FIRST ORDER BY id) max_dname_std
    12  FROM t
    13  GROUP BY id;
            ID MIN_ MAX_
            37 ABC  DEFG
            65 ABCD DEFG
            70John

  • Oracle RAC - Not getting performance(TPS) as we expect on insert/update

    Hi All,
    We got a problem while executing insert/update and delete queries with Oracle RAC system, we are not getting the TPS as we expected in Oracle RAC. The TPS of Oracle RAC (for insert/update and delete ) is less than as that of
    single oracle system.
    But while executing select queries, we are getting almost double TPS as that of Single Oracle System.
    We have done server side and client side load balancing.
    Can anyone knows to solve this strange behaviour? Shall we need to perform any other settings in ASM/ Oracle Nodes
    for better performance on insert/update and delete queries.
    The following is the Oracle RAC configuration
    OS & Hardware :Windows 2008 R2 , Core 2 Du0 2.66GHz , 4 GB
    Software : Oracle 11g 64 Bit R2 , Oracle Clusterware & ASM , Microsoft iSCSI initiator.
    Storage Simulation : Xeon 4GB , 240 GB ,Win 2008 R2, Microsoft iSCSI Traget
    Please help me to solve this. We are almost stuck with this situation.
    Thanks
    Roy

    Load Profile Per Second Per Transaction Per Exec Per Call
    ~~~~~~~~~~~~ ------------------ ----------------- ----------- -----------
    DB time(s): 48.3 0.3 0.26 0.10
    DB CPU(s): 0.1 0.0 0.00 0.00
    Redo size: 523,787.9 3,158.4
    Logical reads: 6,134.6 37.0
    Block changes: 3,247.1 19.6
    Physical reads: 3.5 0.0
    Physical writes: 50.7 0.3
    User calls: 497.6 3.0
    Parses: 182.0 1.1
    Hard parses: 0.1 0.0
    W/A MB processed: 0.1 0.0
    Logons: 0.1 0.0
    Executes: 184.0 1.1
    Rollbacks: 0.0 0.0
    Transactions: 165.8
    Instance Efficiency Indicators
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Buffer Nowait %: 93.74 Redo NoWait %: 99.96
    Buffer Hit %: 99.99 Optimal W/A Exec %: 100.00
    Library Hit %: 100.19 Soft Parse %: 99.96
    Execute to Parse %: 1.09 Latch Hit %: 99.63
    Parse CPU to Parse Elapsd %: 16.44 % Non-Parse CPU: 84.62
    Shared Pool Statistics Begin End
    Memory Usage %: 75.89 77.67
    % SQL with executions>1: 71.75 69.88
    % Memory for SQL w/exec>1: 75.63 71.38

  • Oracle RAC requires ODP?

    I am starting a new project with the following scenario: .Net 2.0 web application accessing Oracle RAC (64 bits) using Data Access Application Block. I would like to know if it is required to use ODP to access Oracle RAC or Microsoft Oracle Data Provider could be used. Another questions: Do ODP supports .Net 2.0? Is it possible to configure ODP in Data Access Application Block?
    Any help is appreciated.
    Luciana

    Hi,
    ODP.NET does not currently support ADO2.0. There should be a beta coming up sometime soon for it, and there are other threads you can check to get info to get in on the beta if you want to do that.
    A lot of the RAC functionality is handled by the underlying client, so both ODP's should be able to take advantage of it, at least in some sense. However, as of 10.2, Oracle's ODP has additional functionality to be able to get notification when RAC events occur.
    I dont know much about DAAP, but believe there are other threads where folks have converted it to Oracle code.
    Hope that helps,
    Greg

  • Oracle RAC / Logical Data Guard causing network problems on VMware

    We have VMWare 5.0 cluster across the 12 blades (6 per chassis) running a mixture of Red Hat and Windows 2008 R2 vms. The Red Hat boxes are two times two node Oracle RAC (primary and secondary), also apache web servers and jboss application servers. The Windows servers are for AV/DC/Management/Monitoring.
    The problem is that intermittent network connectivity to random Windows and Red Hat boxes occur when the Oracle RAC builds up archive logs and then ships / applies them to the secondary nodes, between ESX nodes either on different blades in the same chassis or across the chassis and even when all RAC nodes are on the same ESX host.
    We are using NFS, Oracle 11g and Red Hat 6.2.
    Sorry if this info is a bit vague, im not an Oracle expert! :-)
    thanks,
    Dave

    Hi,
    1.) The calculation for Standby RedoLogs is:
    (Max Number of Logfiles per thread (Instance) +1) * Max Number of Threads (Instances))
    So if you have 4 Redo Log Groups on your primary (which is 2 Redo Log Groups per Instance), then it ends up:
    (2 +1) * 2 = 6
    So actually you will only need 6 standby redo logs, not 8. But 2 more don't harm.
    Your primary will need exactly the same number (6 or in your case 8). Which will be 3 per thread/instance or in your case 4.
    2.) The SID List in the listener.ora is a listing of SIDs the Listener is listening on. It is not the listener name.
    Hence it is not "lsnrctl guard_dgmgrl start" but only "lsnrctl LISTENER start", whereas the LISTENER is the default and "lsnrctl start" would be sufficient.
    However since this is grid infrastructure with the listener running out of ASM home, be sure to have set your environment to GI Home not to DB_HOME for the listener.ora entries, but to DB_HOME for the tnsnames.ora entries necessary for data guard.
    And since listener is running under clusterware you should use "srvctl stop listener" and start.
    Last but not least the SID entries for dataguard have to use DGMGRL not dgmgrl.
    3.) Here is the whitepaper you are looking for:
    www.oracle.com/goto/maa
    Also for client failover best practices.
    (Here the direct link to the RAC whitepaper):
    http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf
    However since this is 10g you should combine this with the 11g RAC standy paper (e.g. SCAN Listener setup).
    Sebastian

  • Questions regardin "Oracle Database does not support Hyper-V and "

    Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
    1 - Can you give me some details about what is not supported of the Hyper-V environment?
    2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
    2 - There are know issue about curruption of datafile using snapshoting,
    Thanks in advance.

    Hello.
    Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
    ==Quote ==
    "Oracle Database is certified with the following Windows Server 2008 editions:
    * Windows Server 2008 Standard (x86 and x64)
    Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
    ==/Quote==
    Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
    Thanks for your advice.
    Jakub

  • Microsoft Hyper-V virtualization platform for LiveCycle server

    Hi everybody,
    I have a client who asked me if LiveCycle supports Microsoft Hyper-V environment virtualization.  Is Hyper-V supported by latest versions of LiveCycle either ES3 SP2 or the new upcoming ES4?
    Thanks in advance.

    Hi;
    we have R12.1.1 with database ( 11.1.0.7).
    can we configure our R12 real time physical database on microsoft hyper v virtualizatised server ??
    Please review:
    https://blogs.oracle.com/stevenChan/entry/ebs1213_oraclevm
    will this physical standby database on virtualization bear full load of users in case of switchover / failover ??We have some customer who use VM and they are happy. It dependes your expectation.
    PS:For EBS related issue close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » E-Business Suite » EBS General Discussionr which is EBS dedicated forum site.
    Regard
    Helios

  • In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

  • Install Oracle RAC 10g (10.2.0.1) on HP-UX  B.11.31 U ia64 failed

    Hi All
    I am installing Oracle RAC 10g 10.2.0.1 on HP-UX B.11.31 U ia64 but can not complete
    hosts file
    #Public IPs
    10.144.1.111 spgdb01
    10.144.1.112 spgdb02
    #Private IPs
    10.144.2.2 spgdb01p
    10.144.2.3 spgdb02p
    #Virtual IPs
    10.144.1.113 spgdb01v
    10.144.1.114 spgdb02v
    I do installation with runInstaller without error. It copy and link is ok. When I run root.sh then It cannot complete as following
    Checking to see if Oracle CRS stack is already configured
    Checking to see if any 9i GSD is up
    Setting the permissions on OCR backup directory
    Setting up NS directories
    Oracle Cluster Registry configuration upgraded successfully
    WARNING: directory '/oracle/product/10.2.0' is not owned by root
    WARNING: directory '/oracle/product' is not owned by root
    WARNING: directory '/oracle' is not owned by root
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 0: spgdb01 spgdb01p spgdb01
    node 1: spgdb02 spgdb02p spgdb02
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    Now formatting voting device: /ora/crs/votedisk01
    waitpid(-1, 0x7fffdf50, WUNTRACED) .................................................................................................... [sleeping]
    Now formatting voting device: /oracle/oradata1/crs/votedisk02
    Now formatting voting device: /oracle/oradata2/crs/votedisk03
    Format of 3 voting devices complete.
    Startup will be queued to init within 30 seconds.
    ====================
    I have waited for 10 mins but still not complete
    Additionally, log from runInstaller, I got
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-28_12-13-31AM. Please wait ...-bash-4.2$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Private Interconnect : null
    Private Interconnect : null
    Private Interconnect : null
    Private Interconnect : null
    So, please help me fix this issue
    Thank you

    I had this problem and resolved it by transporting the file to the installation server with the correct ftp datatype (binary).
    On page 54 of the install guide (..Server\Oracle_Business_Intelligence\doc\doc\bi.1013\b31765.pdf) that comes with the installation files, there is an instruction to make sure that any ftp activity is done in binary.
    This may not have occured with the license.xml file if you use a tool which offers the "feature" of automatic datatype recognition.
    Hope this helps.

  • Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4

    Hi All,
    Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
    OS: Sun Solaris 5.9
    Hardware: Sun E2900
    Oracle Version: 9.2.0.6
    Veritas Cluster Server: 4.1
    We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
    As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
    We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
    Thanks a lot in advance for help
    Regards,
    Manoj

    Orcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.

  • Oracle rac templates 11g R2 buildcluster.sh error

    Hi All,
    am facing below error, while creating oracle rac templates. kindly let us know how to resolve below error.
    ===error=========================
    Oracle RAC 11gR2 OneCommand (v1.2) for Oracle VM - (c) 2010-2011 Oracle Corporation
       Cksum: [1170221909 255000 racovm.sh] at Sun Jan  5 04:15:14 EST 2014
       Kernel: 2.6.18-194.0.0.0.3.el5xen (i686) [1 processor(s)] 1700 MB
    2014-01-05 04:15:14:[printparams:Time :racnode1] Completed successfully in 4 seconds (0h:00m:04s)
    2014-01-05 04:15:14:[setsshora:Start:racnode1] SSH Setup for the Oracle user(s)...
    INFO (node:racnode1): Running as oracle: /u01/racovm/ssh/setssh-Linux.sh -s -x -c NO -h nodelist -p ***   (setup on 2 node(s): racnode1 racnode2)
    ERROR: Failed to create temporary file /tmp/setssh-cretmpQY3958 on localhost, can not proceed
    Exiting...
    ERROR (node:racnode1): Failed to configure passwordless SSH for the oracle user
    2014-01-05 04:15:17:[setsshora:Time :racnode1] Completed with errors in 3 seconds (0h:00m:03s), status: 1
    2014-01-05 04:15:17:[buildcluster:Time :racnode1] Completed with errors in 58 seconds (0h:00m:58s), status: 1
    thanks,
    Mike.

    Try this. It worked for me.
    Please keep in mind that you will need wait till each step finishes successfully before move to next one
    For Step1 and 2, you can skip node(s) on which you didn't execute root.sh yet.
    Step 1: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force" on all nodes, except the last one.
    Step 2: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force -lastnode" on last node. This command will zero out OCR and VD disk also.
    Step 3: As root, run $GRID_HOME/root.sh on all node one by one

Maybe you are looking for

  • Adding Text to the last page in SAP Script RVORDER01

    Hi Experts,                  I have copied RVORDER01 and changed the log for it and added my ZRVORDER01 in NACE. Now they want Some text to be added to the last page of the script how to do this without changing Standard Print Program ? Please guide

  • Opening a pdf file using JSP

    hi all, we have a very simple requirement. A pdf file resides on the server. We want to have a link inside the jsp page, so when the user clicks the link the pdf file opens inside the browser. Using pure html the simple code is: <a href = "/document.

  • Chinese and Thai Character problems when publishing

    Hello All, I'm having trouble getting Chinese and Thai characters to display properly after publishing and using the htm file.  For the most part, Chinese is sharp, but certain characters get muddled up. For Thai it seems that Captivate is chopping o

  • Update query in procedure

    I have 2 tables aas below. create table main_data(id number,all_set_flag char(1),set_time timestamp) create table sub_data(id number,set_time timestamp); insert into main_data values(1,'',''); insert into main_data values(1,'',''); insert into main_d

  • Quantity Conversion in F & A Pricing

    Hello friends, This question is related to F & A Pricing in IS-Oil MAP solution. I am facing a problem while changing a Billing Document in VF02. In the pricing item conditions screen, when I try to click on the zoom button of a F & A condition type,