Oracle RAC service on Windows
There are Oracle 10g on Windows 2003 and RAC. Following service
OracleCSService
OracleCRService
OracleEVMService
Can I start any service before another service when restart windows or there must start what service first?
Thankyou
Once you start windows server and if all the oracle services are disabled. Then, first of all set all the oracle services to automatic mode and then just start the Oracle CRS service and then this will start all other services automatically for you.
in the sequence.
Hope this Helps
Regards
Similar Messages
-
Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PMuser2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Oracle RAC 11g On Window Server 2003 Installation Step by Step
Hi all
I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003
I have tow nodes
EMC storage
Any body can help please ...
Thanks in Advance.
Edited by: MHAIDAR on Jun 15, 2011 1:19 AMI tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003check this
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnWindows2003UsingVMware.php -
Error While starting Oracle APPS services in windows
While starting the Oracle Applications services in windows, it gives some memory error, "unable to read memory XXXXXX".
Is it possible to recreate the services alone?
How i can solve the problem with out re-Installation?johnveslin,
I would recommend to theck HW.
Disk. Memory etc.
Yury -
Domain migration of Oracle RAC nodes on windows 2008
Hello masters,
We are planning to migrate servers from old domain to a new domain due to company name change. That is, our DB servers named like db-node-x.old-domain.com will be migrated to db-node-x.new-domain.com. The servers are all on Windows 2008 R2 and Oracle RAC 11g2. As dba, i have no idea about what will happen to DBs. Please let me know any possible solutions?
Thanks in advance.user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Oracle RAC 10g on Windows XP Professional
Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP? -
Oracle Rac services on second node
Hi all
I have got oracle rac database installed on a 2 node cluster. I was not able to get the below 2 services online (state) on the second node. Any idea?
ora.racdb.racdb2.inst
ora.racdb.racdb_taf.racdb2.srv
Name Type Target State Host
ora....b2.inst application ONLINE OFFLINE
ora....db2.srv application ONLINE OFFLINE
I checked the +ASM2 instance on the second node, the asm_diskgroup parameter is not set. Is that the cause of the problem I am encountering?
Thanks all
OS: Oracle Enterprise Linux 5 x86
Oracle: Oracle 10g x86You should be able to find some more information in the instance's alert log file. But not having asm_diskgroups set is a very likely cause. Your diskgroups won't get mounted and that leads to the instance not being able to start (because it won't even find the spfile if it is stored on ASM). You could try to mount them manually like this:
export ORACLE_SID=+ASM2
sqlplus sys/ as sysdba
alter diskgroup MYDISKGROUP mount;and then start the instance with 'srvctl start instance -d myracdb -i myinstance2'
Or, of course you could edit the asm instance's pfile (or spfile) to include the asm_diskgroup parameter and reboot the server (or just asm)
Bjoern -
Monitoring RAC services in Windows
I have a 2 node RAC database installed on Win 2003. I've had the Database service go down a few times kind of "magically". I'm looking into the kind of magic that caused this (suspect it was a storage issue), but in the mean-time I need to send out an alert to someone if this goes down. Does anyone have a good way/tool to monitor OS services and send out an e-mail when one goes down?
Aren't you using grid control?
http://download.oracle.com/docs/cd/B19306_01/server.102/b25159/monitor.htm#i1006661 -
How to recover oracle 9i services in windows xp
i had my registry corrupted so i had to restore it from an old registry bakup tht i had made
the problem now is that the bakup was taken before i installed oracle
so now i have oracle installed without any registry entries so i had to install it all over again but it asked for a different database name.when i entered my old name it showed me an error that it already exists so i intalled it with a new database name. now everything is working but i cannot start my old database since there is no service available to start it in services
how can i create a service for my old databaseYou can find it in ORACLE_HOME\bin, where ORACLE_HOME may be your C:\oracle\ora92\bin.
Utility name is oradim
following command will create the service.
oradim -new -sid %ORACLE_SID% -pfile c:\path\to\some\init.ora
where %ORACLE_SID% is your old sid name.
Thanks -
Oracle RAC 11gR2 on Windows - Disk Storage Newbie question
Hi all
I have been reading through the Grid install guide in an effort to understand how to set up a RAC solution. I am new to Oracle so a lot of these concepts I am trying to understand but from what I am reading a typical install would be to have my cluster software installed on a particular shared storage type of either OCFS or ASM. These storage types then sit on top of a redundant option such as RAID, or logical volumes across disks or a kind of mirroring (SAME).
I know what I have said is probably a rough attempt at understanding this but what I would like is if anyone has any diagrams that lay this out for me to aid my understanding that would be great.
I am kind of at a stage where I am thinking about creating a RAC installation on some VMWare and want to know how best to configure the initial disks, and whether to add them to a RAID or carve them into partitions.
Hope I have made sense.
ThanksHi;
Please change thread status to answered here, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)
Hello,
I've got two (2) nodes in an Oracle RAC 11g in Windows Server 2008. Oracle software is installed in C:\app.
I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
- Do you have to setup the same in both nodes?
ThanksI realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.its normal behaviour
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1if you installed that location, yes
- Do you have to setup the same in both nodes?actually, you dont HAVE TO, its not needed at all -
Oracle 11g RAC installation on windows 2008 64 bit
Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank youHi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit. -
Oracle RAC 11g on EL5/XEN/NFS
I have written a small article on my Linux/Xen para-virtual based RAC 11g system
http://boulayp.free.fr/articles.php?lng=fr&pg=170user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Oracle RAC 11g - Transition queries
Hi,
I am about to get transition on Oracle databases used currently by one of the client managed by another vendor.
I would like to I have a check list sort of thing for getting transition on Oracle RAC 11g r2 from the current vendor.
Appreciate if anybody can help me on this asap.
Thanks in advance.user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Correct way to install patch in Oracle RAC
Hello,
What is the correct way to install a patch in an two-node Oracle RAC 11g on Windows server 2008? Each node has its own ORACLE_HOME.
Do I have to shut down one Node before I patch the other Node?
Or both nodes can be up when installing patch? First do it on Node 1 and then on Node2?
Thank youTypically you can do a rolling upgrade, patch one node, then the next node without bringing down the entire cluster, but as rui_catcuddler suggested, follow the Oracle instructions as closely as possible.
We have found several bugs with RAC 11gR2 on Windows 2008 R2, some minor, some critical. If this is your Oracle version and platform then try to get to the latest Oracle RAC release 11.2.0.3.
Regards,
Kevin
Maybe you are looking for
-
"USB Device Not Recognized" Bubble/ Ipod won't connect to Windows
Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same tim
-
I am running Logic express 9 on a 2008 Macbook, (non pro). Anyhow, logic has always seemed to work great for me. However, last week I opened up one of many existing projects, (I'm in sample editor). When I went to add a new plugin to one of the ch
-
Hide price in ALL Tx accg to material authorization group or material group
Hello, I'm currently working on a customer's need which consists in hiding the material price in all transactions (MM, SD, FI...), according to the material master authorization group OR the material group. The difficulty remains on the fact that use
-
How to use short[] someDescriptorTags
I have a problem concerning implementation of SI, and I need your help desperately. lots of method in interface from SI have a parameter used to filter descriptor tag. Taking the SIDatabase class for example, the class has a method: retrieveSINetwork
-
Apply gradients to smaller areas?
What's the easiest way to apply a gradient to a specific area? For example, in a landscape where you a want gradient between the clouds and foreground and its only 20% of the total image that you want to affect?