Oracle RAC support NFS in AIX
May I ask a question...
My environment: SAP run on the AIX. may I use the Oracle RAC by NFS in AIX for Oracle HA ...?
Hi Dennie,
As far as I read from the development update SAP on Oracle, SAP supports NAS NSF with RAC 11.2 on all Unix platforms. Check the link http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d053aa41-75b6-2d10-95b5-9a961a5ae750?quicklink=ora&overridelayout=true
Check the statement in the note "1416773 - Oracle Direct NFS", below;
Advantages of Oracle Direct NFS :
Since NFS is a shared file system, you can also use this
implementation for Real Application Clusters (RACs). Oracle Direct NFS
recognizes if an instance is part of an RAC installation.
Best regards,
Orkun Gedik
Similar Messages
-
Hello All,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?
Regards,Hi,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?Pl Refer MOS tech notes:
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]*
*Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]*
*Master Note for Automatic Storage Management (ASM) [ID 1187723.1]*
*Can We Install 10gr2/11gr2 on AIX 64-bit OS When Running in 32bit Kernel Mode [ID 956449.1]*
*Master Note for Real Application Clusters (RAC) Oracle Clusterware and Oracle Grid Infrastructure [ID 1096952.1]*
Also refer:
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/toc.htm
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101176
Re: 11gR2 RAC installation in AIX help urgent...!!!!
Hope helps :)
thanks,
X A H E E R -
Hi,
Does CIAC support Oracle RAC clusters? I'd like to put a bit of resilience on the Oracle database backend and so would like to setup an Oracle RAC. If I did would this invalidate any support if there was an issue with connectiviity to the database.
Regards,
Mohammed RakhadaCisco Advanced Services have a service to install using RAC One Node, and PO supports RAC as well.
See this doc for details
https://supportforums.cisco.com/docs/DOC-28219 -
Hello,
Do you know if DI 12 support Oracle configured in RAC mode?
if yes, how is it possible configure a Datastore for Oracle RAC configuration?
Thanks,
RenatoYes, RAC is supported. Your TNSNames.ora entry wil look slightly different but from the datastore you just mention the tns alias as before.
-
Oracle RAC support more then one database
My company's requirement is to have multiple database, instead of multiple schemas in the same databsae. The only reason to have multiple database is to support different applications with different database versions. for eg. One application sitting in Oracle RAC with have version 10.02.0.0. and other applications will have 10.02.0.2.
You can have multiple instances on a node or multiple databases on one RAC cluster. However a more important factor that should be considered is to ensure that the servers are capable of handling the additional workload.
Also to consider is the software compatibilities between various versions of Oracle RDBMS, ASM and the Oracle Clusterware. -
Oracle RAC support on SLES versions
hi all,
we have a client requirement who have Oracle DB. further details we dont know as of now. i dont have metalink access. :(
could someone please let me know whether Oracle for versions 8i 9i 10g 11g supports Suse Linux Enterprise Servers 10 and 11 on standalone and RAC installations?
without metalink access i am not able to confirm this ... sorry for the trouble .
as per oracle docs
Operating system x86
Red Hat Enterprise Linux AS/ES 3 (Update 3 or later)
Red Hat Enterprise Linux AS/AS 4 (Update 1 or later)
SUSE Linux Enterprise Server 9 (Service Pack 2 or later)user1983888 wrote:
Hi,
We want to know if Oracle 10g R2 RAC is supported on Windows 2008 (64-Bit)?Yes.
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
Check 782795.1 RAC on Windows: Oracle Clusterware Installation Steps Particular for Windows 2008 Clusters -
Oracle RAC and ASM for SAP in SLES
Hello,
We are installing our SAP ERP with Oracle RAC 11.2.0.2 on SLES 11 x86_64. According note 527843 (Oracle RAC support in the SAP environment), this is supported for SAP. But as a requirement ASM Cluster File System must be setup.
But when Oracle Grid is installed, ACFS installation returns the following error:
ACFS-9459: ADVM/ACFS is not supported on this OS version: 'sles-release-11.1-1.152'
So Oracle GRID has been installed without ACFS, so we will not be able to use Oracle Clusterware for providing high availability of SAP.
As this is supposed to be a feasible combination (Oracle RAC 11.2.0.2 with ASM on SLES 11 SP1, Netweaver 7.0), I'm wondering if it is a bug, a lack of documentation or something I'm missing.
Kind regards,
FermíRead this below Oracle Note:
ACFS not supported on certain platforms [ID 1075058.1]
oracle@node1:~/app/oracle/product/grid/log/node1> tail -1 alertesiha.log
[client(14083)]CRS-10001:ADVM/ACFS is not supported on SUSE
Then these can be ignored, since ACFS/ADVM may not be supported for your platform. As of this writing, Sun, AIX, SuSE 10 are all supported in 11.2.0.2 only. HP-UX, SuSe 11 and RH6.0, as well as Oracle UEK ((2.6.32-100*) are not yet supported in 11.2.0.2. Keep in mind that this does not prevent your Grid Infrastructure stack (Clusterware and ASM) from starting. This is just an informational message for these platforms
Extract from SAP Note:
RAC 11.2.0.2 (x86 & x86_64 only):
Oracle Clusterware 11.2.0.2 + ASM/ACFS 11.2.0.2 (currently only for SLES10, RHEL5, OL 5.x (without UEK))
Thanks
Srikanth M -
Oracle RAC SOlaris 10 in Containers or in LDOMs
I want to run Oracle RAC in Solaris 10 containers or in Logical Domains. Is ORacle RAC supported in Containers or LDOMs? Has anyone experinece with these Oracle RAC environments?
I didn't see your system listed in the Solaris or OpenSolaris hardware compatibility list. It may very well be that it is not supported for Solaris. Check here to see: http://www.sun.com/bigadmin/hcl/search.jsp
You may also want to contact Sun and see if it is supported. -
ORACLE RAC - Clusterware 11Gr1 -
Hi,
We are starting a fresh installation of an Oracle RAC database on:
IBM AIX 5.3
Processor Type: PowerPC_POWER7
Processor Implementation Mode: POWER 6
Processor Version: PV_6_Compat
Number Of Processors: 2
Processor Clock Speed: 3108 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
We are changing the servers and installing new binaries: clusterware ,asm binary, rdbms binary. After that, database will be migrated to this server. The oracle clusterware will be on 11.1.0.7, ASM on 11.1.0.7 and RDMS on 10.2.0.4. We are installing exactly as it is in production now.
After the servers were release to the dba, configured the ocr and voting disks and the pre-reqs, during the installation we face an error on the second node, while running the root.sh. The installation went successfully, 100% and on the first node finished successfully and started the services. On the second node, while running the root.hs, it failed with the message :
--> Failure at final check of oracle CRS stack. 10
Checking the logs, we could see the following:
[ CSSD]2011-09-25 02:59:51.633 [1030] >TRACE: clssnmReadDskHeartbeat: node 1, hodev001ler, has a disk HB, but no network HB, DHB has rcfg 212382813, wrtcnt, 2978, LATS 3178240991, lastSeqNo 2978, timestamp 1316930391/924708736
[ CSSD]2011-09-25 02:59:51.984 [1287] >TRACE: clssnmReadDskHeartbeat: node 1, hodev001ler, has a disk HB, but no network HB, DHB has rcfg 212382813, wrtcnt, 2978, LATS 3178241341, lastSeqNo 2978, timestamp 1316930391/924708736
[ CSSD]2011-09-25 02:59:52.304 [1801] >TRACE: clssnmReadDskHeartbeat: node 1, hodev001ler, has a disk HB, but no network HB, DHB has rcfg 212382813, wrtcnt, 2978, LATS 3178241662, lastSeqNo 2978, timestamp 1316930391/924708736
[ CSSD]2011-09-25 02:59:52.635 [1030] >TRACE: clssnmReadDskHeartbeat: node 1, hodev001ler, has a disk HB, but no network HB, DHB has rcfg 212382813, wrtcnt, 2979, LATS 3178241992, lastSeqNo 2979, timestamp 1316930392/924709737
[ CSSD]2011-09-25 02:59:52.771 [5399] >TRACE: clssnmLocalJoinEvent: node(1), state(0), cont (1), sleep (0), diskHB 1, diskinfo 110aa46f0
[ CSSD]2011-09-25 02:59:52.771 [5399] >TRACE: clssnmLocalJoinEvent: node(2), state(1), cont (0), sleep (0), diskHB 1, diskinfo 110aa46f0
All the notes seems to point to and interface/interconnect problem, but we dont have any clue on what parameter or what checks we need to perform with Unix Team. Does anybody had this issue? Any clue on what may be need to be adjusted or configured to solve this issue? Following below is the interfaces of both servers: hodb001lernew and hodb002lernew:
hodb001lernew
root@hodev001lernew:/u01/crs/log/hodev001ler # ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.85.221 netmask 0xffffffe0 broadcast 10.124.85.223
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.140.109 netmask 0xffffffe0 broadcast 10.124.140.127
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en3: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.56.96.47 netmask 0xffffe000 broadcast 10.56.127.255
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en5: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.251.4 netmask 0xffffffc0 broadcast 10.124.251.63
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
hodb002lernew
root@hodev002lernew:/u01/crs/log/hodev002ler # ifconfig -a
en0: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.16.1.11 netmask 0xffffff00 broadcast 172.16.1.255
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.85.220 netmask 0xffffffe0 broadcast 10.124.85.223
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.140.110 netmask 0xffffffe0 broadcast 10.124.140.127
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en3: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.56.96.48 netmask 0xffffe000 broadcast 10.56.127.255
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
en5: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 10.124.251.7 netmask 0xffffffc0 broadcast 10.124.251.63
tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
Also, while we run the cluverify, it appears the following warning on the interfaces verification:
Checking node connectivity...
Node connectivity check passed for subnet "172.16.1.0" with node(s) hodev002ler,hodev001ler.
Node connectivity check passed for subnet "10.124.85.192" with node(s) hodev002ler,hodev001ler.
Node connectivity check passed for subnet "10.124.140.96" with node(s) hodev002ler,hodev001ler.
Node connectivity check passed for subnet "10.56.96.0" with node(s) hodev002ler,hodev001ler.
Node connectivity check passed for subnet "10.124.107.224" with node(s) hodev002ler,hodev001ler.
Node connectivity check passed for subnet "10.124.251.0" with node(s) hodev002ler,hodev001ler.
Interfaces found on subnet "172.16.1.0" that are likely candidates for VIP:
hodev002ler en0:172.16.1.11
hodev001ler en0:172.16.1.13
Interfaces found on subnet "10.124.85.192" that are likely candidates for VIP:
hodev002ler en1:10.124.85.200
hodev001ler en1:10.124.85.222
Interfaces found on subnet "10.124.140.96" that are likely candidates for VIP:
hodev002ler en2:10.124.140.97
hodev001ler en2:10.124.140.101
Interfaces found on subnet "10.56.96.0" that are likely candidates for VIP:
hodev002ler en3:10.56.96.8
hodev001ler en3:10.56.96.32
Interfaces found on subnet "10.124.107.224" that are likely candidates for VIP:
hodev002ler en4:10.124.107.231
hodev001ler en4:10.124.107.241
Interfaces found on subnet "10.124.251.0" that are likely candidates for VIP:
hodev002ler en5:10.124.251.7
hodev001ler en5:10.124.251.4
WARNING:
Could not find a suitable set of interfaces for the private interconnect.
Any helps?
Thanks,Hi,
Thanks for the reply. Here is what I have:
Node 1:
oracle@hodev001lernew:/home/oracle # ssh hodev002lernew date
Tue Oct 4 19:09:16 GRNLNDST 2011
oracle@hodev001lernew:/home/oracle # ssh hodev002lernew_pri date
Tue Oct 4 19:09:25 GRNLNDST 2011
Node 2:
oracle@hodev002lernew:/home/oracle # ssh hodev001lernew date
Tue Oct 4 19:10:24 GRNLNDST 2011
oracle@hodev002lernew:/home/oracle # ssh hodev001lernew_pri date
Tue Oct 4 19:10:57 GRNLNDST 2011
Regarding the Firewall point, I issued the command lsfilt but didn't return. it means it is not enabled? Im at AIX 5.3, any other command to verify this point ?
root@hodev001lernew:/ # /usr/sbin/lsfilt -a
Can not open device /dev/ipsec4_filt.
root@hodev002lernew:/ # lsfilt -a
Can not open device /dev/ipsec4_filt.
Thanks
Edited by: user11969939 on 04/10/2011 15:23 -
Hi
Could anyone tell me if Oracle RAC supports Myrinet.
Thank youhttp://download.oracle.com/docs/cd/B19306_01/server.102/b14220/bus_intl.htm#sthref2435
Your answers are just a few clicks beyond the URL below.
http://tahiti.oracle.com -
SAP EHP6 Installation Steps with Oracle RAC
Dear Experts,
i am looking for step by step guide for SAP ehp6 installation with Oracle RAC. if anyone can help please guide me with the steps or share if any document available
ThanksHi Wali,
You can follow below documentation to perform your installation on Oracle RAC.
http://scn.sap.com/docs/DOC-8835
This document is very useful for planning the installation and executing the same
Some other useful documents
Installation of SAP on RAC with Oracle ASM
SAP note which needs to be referred for installation
Note 527843 - Oracle RAC support in the SAP environment
Hope this helps.
Regards,
Deepak Kori -
SAP - Oracle RAC - Linux - VMware
Hi,
we would like to install SAP on a virtual environment (VMware) on Linux RedHat platform.
For the database, Oracle RAC is certified with OCFS2 (1.6) only with Oracle Linux and not RedHat Linux 5.
Can we intstall Oracle RAC database on 2 nodes with Oracle Linux and OCFS2 and other SAP components on Redhat Linux 5 ?
Are there any issues with SAP matrix compatibility ?
Thank you!
DanHi Audun,
Thank you for the links.
I can see the ASM support is new (2.2.2011)
On Note 527843 from 25.01.2011 - Oracle RAC support in the SAP environment
Using raw devices and ASM (Automatic Storage Management) is not supported in the SAP environment. In the case of ASM, there is an exception regarding the Oracle Cluster Registry (OCR) and the voting disks
and
on Note 1550133 - Oracle Automatic Storage Management (ASM) from 2 Feb 2011 they support ASM but with restrictions:
ACFS is required for RAC installations with ASM
To use ASM now, you have to migrate your database to ASM manually
Some important functions of SAP BR*Tools like backup, restore, recovery, tablespace and datafile management are not supported at the moment
Support for tablespace and datafile management is planned for Q2/2011
Also ASM instance will introduce another layer in the system with its problems, failures and resources consumption. I see on the Oracle Metalink alot of problems related to ASM. From the marketin point of view is ok, let's oracle do everything but I think if you will keep it simple it will be better.
I didn't figure out if you can directly install Oracle 11.2.0.2, they say "Allows direct SAP system installations with Oracle 11.2"
We have a vBlock hardware with flash disks as FAST Cache so I believe with 1TB of cache IO will not be a problem.
Thank you!
Dan -
How similar is HACMP to Oracle RAC?
Gurus:
Have you compared HACMP with Oracle RAC? If so, could you share the difference and the similarity?
Thanks!Hi Linda,
seems to be a likewise question as
How similar is HACMP to MSCS?
In fact, you use them together:
Note 527843 - Oracle RAC support in the SAP environment
Markus -
Does NFS support Oracle RAC with TAF ?
Hi,
Does NFS support Oracle RAC with TAF feature. ?
If yes, please point to some valid document to prove the same.
Regards
SumitTAF has nothing to do with the underlying storage architecture and is therefore 'supported' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the certify tab in metalink. Some information can also be found here
TAF will be available on any rac installation, but not all drivers support it (jdbc-thin for example)
Bjoern -
Oracle RAC on AIX gpfs.base
Oracle Database Enterprise Edition 11.2.0.2
IBM AIX 6.1
Hi
I need to install Oracle RAC on IBM AIX 6.1. For shared storage, we need gpfs.base as per documentation.
We are using Netapp SAN for storage.
Are there any alternatives to gpfs.base which can be used so that both nodes have access to same SAN storage ?Hi;
Please check below note
IBM General Parallel File System (GPFS) and Oracle RAC [ID 302806.1]
If its not help i suggest connect wiht your vendor and also confirm this issue with support
Regard
Helios
Maybe you are looking for
-
Jquery Date Picker Validation - format issue
Hi , I am using 2 text items with Jquery dateicker for start date and end date items. I have to now write a JS validation to ensure start date <= end date. The dateformat of my items are 'd-M-yy' (02-Mar-2010) ..... When I try to use the Date.parse()
-
Hi, I have some questions about the number of processors regarding clusters. For example, if i want to install rac on 2 nodes, on 2 different machines, does it mean that i have to buy a license for 2 processors ? In the same way, if i want to install
-
Sorry folks, another CPU overload complaint. I'm having crazy overloads which seem to be specific to core 2 of my G5 2.0 GHz Dual core processor. Core 2 will max out resulting in crackling audio when simply playing chords on one soft synth. I have ex
-
Ho to change the mapped System object to the Model to another System object
Hi All, Initially i have created one system object (TestSystemForVC) for testing the VC application. Then i have started completing the whole development in that perticular model object. many data soruce objects are added to the model using the TestS
-
Database Error when refreshing planning.
hi frnds please help me with this issue, I added a few new members. They are dynamic calc with member formulas. It appears only one of the members is causing an error. I am not sure what I have done incorrectly on this one member. It appears to be se