Oracle RAC with operating system virtual network cards

Hi,
I have two servers with four network cards each, two for public and two for private network. Each public card has own IP-address and the both have the virtual IP-address (from OS, not from Oracle Clusterware). Each private card has own IP-address and the both have the virtual IP-address. I have full redundancy for network cards. How should define Oracle Clusterware VIP-address for each machine?
Can somebody write me sample /etc/hosts file for this configuration?
Thanx,
Jacek

Oracle RAC and crossover cable for private network

Similar Messages

  • How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

    how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
    I have tried with dsquery below but status is not showing there.
    dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

    last logon user name - not really stored (or lined) with computer object.  However, you can get this info during the logon process or from the computer.  Here is method:
    http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
    Santhosh Sivarajan | Houston, TX | www.sivarajan.com
    ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
    Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
    Blogs: Blogs
    Twitter: Twitter
    LinkedIn: LinkedIn
    Facebook: Facebook
    Microsoft Virtual Academy:
    Microsoft Virtual Academy
    This posting is provided AS IS with no warranties, and confers no rights.

  • Does NFS support Oracle RAC with TAF ?

    Hi,
    Does NFS support Oracle RAC with TAF feature. ?
    If yes, please point to some valid document to prove the same.
    Regards
    Sumit

    TAF has nothing to do with the underlying storage architecture and is therefore 'supported' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the certify tab in metalink. Some information can also be found here
    TAF will be available on any rac installation, but not all drivers support it (jdbc-thin for example)
    Bjoern

  • Oracle JVM and Operating System JVM different?

    Are Oracle JVM and Operating System JVM different?
    For applying the DST patches if JVM is updated from OS patches do we need to apply any other jvm patches again?

    Hi,
    Yes, the OracleJVM is embedded in the RDBMS kernel and does not share any reference/components with the JDK (i.e., OS JVM); fwiw, you can learn more about OracleJVM (archtecture, memory management, security, threading, performance) in chapter two of my book.
    Regarding the DST patch, there is an RDBMS patch that should cover OracleJVM as well; Re: How to verify if the DST patch applied correctly or not.
    Kuassi http://db360.blogspot.com

  • Filter problem with operating system in french

    Hello,
    There is a problem with the "Operating System - Windows" filter in the french version of ZCC.
    If you create a bundle and go into "Requirements" and add a filter with Operating system and you set it to "Version 6.1 - Windows 7 / Windows Server 2008 R2" you get this error
    "Vos modifications ne peuvent pas tre appliques pour les raisons suivantes :
    ErreurLa version doit tre sous la forme "x" "x.x.x.x". "
    "You changes cannot be applied for the following reason : formatting must be x to x.x.x.x"
    The format should be "6.1 - Windows 7 /Windows Server 2008 R2 Versions".
    The filter does work as intended with the english versions of ZCC. I have no problem with that but some of our admin does.
    PS : I am currently unable to open an SR because our licence has not been renewed yet. So i am reporting this here.
    Thank you!

    Originally Posted by GuillaumeBDEB
    Hi poplante, this bug is haunting Novell since version 11.0! Believe me on that. I'm the one who reported it. Here's the workaround.
    1.Go to Server machine.
    On Windows:
    Go to
    %ZENWORKS_HOME%\resources\properties\com\novell\ze nworks\core\web\internal\resources\CoreInternal_fr .proeprties
    On Linux:
    Go to
    /opt/novell/zenworks/resources/properties\com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.proeprties
    2.change the property value of windows.versions.6.1 from "Versions 6.1 Windows 7 / Windows Server 2008 R2" to "6.1 Versions Windows 7 / Windows Server 2008R2"
    3.Then Restart the server. The issue will be gone.
    By the way you will see this bug reappear with every new update of ZENworks including new service packs and monthly updates. So keep this workaround at hand just in case.
    Hope it helps!
    GuillaumeBDEB
    In 11.3 the value seems to be:
    windows.versions.6.1=Versions 6.1 - Windows 7 / Windows Server 2008 R2
    But should probably be set to:
    windows.versions.6.1=6.1 - Versions Windows 7 / Windows Server 2008 R2
    And the correct Linux path would be: /opt/novell/zenworks/resources/properties/com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.properties.
    This bug would probably take them a minute or two to fix, sad to hear that it's been there since 11.
    Thomas

  • When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!

    when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!
    This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

    HyperNova Software,
    Thank you so much.  Because I am very computer illiterate, could you help me on how to get started?  I don't have the slightest on where to get started, the steps to follow, etc.
    Can't thank you enough for your help!

  • How can I install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8

    Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

    Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

  • SQLLoader issues of Oracle RAC with ASM

    One of our client wants to use Oracle RAC with ASM for our application, i just want to know if there would be any two-phased commit transactions and SQL*Loader issues in ASM.
    Database is Oracle 10g

    ASM works only at storage layer and has nothing to do with:
    - distributed transactions
    - client executable that connects to database instance: SQL*Loader, SQL*Plus, etc.
    RAC has also nothing to do with distributed transactions: a RAC database is a single database with multiple instances but still a single database; there is no need to use distributed transactions because you have a RAC database.
    Edited by: P. Forstmann on 24 févr. 2011 13:27
    Edited by: P. Forstmann on 24 févr. 2011 13:31

  • Can a Macbook Pro 5.5 with operating system MAC OS 10.5.8 be updated?

    Can a Mac book Pro 5.5 with operating system MAC OS 10.5.8 be updated?  I tried to back up an Iphone 5s and was informed that it needed a newer ITUNES software but then tried to update I TUNES software and could not because it is not compatible with MAC OS 10.5.8

    A 13" 2009 machine? Sure, you can even run Mavericks (and install up to 8GB of RAM), but you'll have to upgrade to Snow Leopard (latest release was 10.6.8 - you can purchase the disc from the Apple online store -> http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard - $20 and FREE SHIPPING!!!).
    After updating to Snow Leopard, then you can upgrade to Mavericks free. I don't know how much RAM you presently have, but your machine will accept up to 8GB of 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMMs RAM. I would recommend upgrading your RAM, if you haven't already, before installing Mavericks, though.
    Good luck,
    Clinton

  • Interaction with operating system

    Hi!
    I want to know how shuold i interact with operating system using java.Actually i m implementing speech to text converter and for that i want to use control panel of windows. so please tell me how i can interact with operating system.
    Regards

    Use either the methods of the Runtime class or use JNI (Java-Native-Interface)
    There are many examples of each, and JNI has a separate forum, Native Methods. Search both Sun documentation and the forums.

  • Oracle RAC with more then two nodes?

    Hello,
    knows anybody a reference client project that use Oracle RAC with more then two nodes on a Linux environment?
    Many thnaks!
    Norman Bock

    Hello Norman,
    XioTech is a SAN company that has a project called "THE TENS". They configured and ran a 10 node RH Linux Oralce 9i RAC. I understand they want to see if 32 are possible. I am sure if you ask them, they would be happy to give you the details.
    http://www.xiotech.com/
    Cheers

  • I wanted to use verizon hotspot wifi with my ipad, but verizon states not compatible with operating system. States that needs windows 7 , Vista, or windows xp. Any ways around this? Any ideas?

    I wanted to use verizon hotspot wifi with my ipad (it searaches for hotspots when ur on the go) but verizon states not compatible with operating system. States that it needs windows 7, Vista, or windows XP. Any ways around this? Any ideas?

    Thank you everyone for reaching out and apologize for being unclear. Let me rephrase. There is NO MiFi.
    I have an ipad3 and a PC
    I am trying to connect the iPad3 to the PC for HotSpotting reason (the ability to use the internet on the PC)
    Turning on HOT SPOT on the Apple ipad works GREAT when using it through WI-Fi and through Blue Tooth. But connecting it directly through the included iPad 3 USB Cable to the USB side of the PC does NOT work. I tried several PCs, and several Cables. Any other ideas

  • SQR running with operating system z/OS 1.4

    Has anyone found any problems running the SQR product on a mainframe with operating system z/OS 1.4? Thanks.

    by purchasing a Snow Leopard retail dvd.  Apple no longer sells them, so try amazon.com, ebay etc.

  • I have a new macbook pro 2,6 Ghz i7, 8GB 1600Mhz internal ram. He will not boot from an external disk with operating system Snow Leopard

    I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.

    These Macs shipped with 10.7, and will run nothing older than that:
    MacBook Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    MacBook Pro (Retina, Mid 2012)
    Jun 2012
    10.7.4
    11E2068
    MacBook Pro (15-inch, Mid 2012)
    Jun 2012
    10.7.4
    11E2617
    MacBook Pro (13-inch, Mid 2012)
    Jun 2012
    10.7.4
    11E2617
    MacBook Pro (13-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001
    MacBook Pro (15-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001
    MacBook Pro (17-inch, Late 2011)
    Oct 2011
    10.7.2
    10.7.3
    11C74, 11C2002, 11D2001

  • Channel Bonding? Oracle RAC with multiple redundant network

    We are planning on setting up on Oracle RAC 10g on Linux.
    We have redundant switches, so I would like to set up the network to have some version of network redundancy.
    Under windows, it is called 'teaming'. Linux is 'channel-bonding'
    I just want to make sure if I setup the channel-bonded interfaces, it will be supported with RAC. Has anyone done this before??
    -Andy

    we are running our RAC on NIC bonding. Although we need to do some more testing to be real sure as to the functionality of the bond.
    Metalink Note:298891.1 would be a good place to start.
    hth,
    -S

Maybe you are looking for

  • MacBook Pro 8,2 (Late 2011), Mountain Lion thunderbolt issue

    Hi! Since my upgrade to OS X 10.8.1 (Mountain Lion) yesterday the ports on the back o my 27 " thunderbolt display no longer seems to function? I can hook up my keyboard directly to my MacBook Pro (Late 2011, 8,2) and it works just fine, and it was wo

  • Accounting entries

    Hi All I have a problem while doing excise invoicing. At the time of GR incoming excise invoice is captured amd posted. The BED and SED accounts are deitted and CENVAT clearance account is credited.. During MIRO when i refer same PO and do , the acco

  • Another bug in Flex? (Application.parameters and query strings)

    I'm passing in two query string parameters in the source of SWFLoader and both of them are clumped together in the first parameter by application.parameters. But I switch the order of the parameters in the query string and both parameters are returne

  • Running gif animation and a random image output from an html button, HELP!!

    Trying to click (onClick) an animated gif image of an on/off switch to start a second animation which is located on a different location on the web-page (a 7-frame animation of a generator with moving parts) immediately followed by a random image sel

  • Is JDMK 5.1 supported from jdk1.5.0 / Solaris10?

    Hi all, I have to upgrade a snmp agent based on jdmk 5.1 and i have to install it on Solaris10 with jdk1.5.0. The system is currently running on Solaris 9 with jdk1.4.2. I wonder if jdmk 5.1 support jdk1.5.0/Solaris10. From the jdmk 5.1 product page