Oracle Redhat 64 bit install does not find right video chip or drivers

Dear Experts,
There is a nice server that I want to install Redhat 5, update 5 on.
I downloaded, from Oracle edelivery, the Linux 64 bit, Redhat 5, Update 5,
and wrote it to bootable CD.
"V20658-01.zip","611558646","0C35737CD35BC26C212D205DF064CE2A","D0C7EF7CFF9635FECFDDB6BB724B1523851C1733","Oracle Linux Release 5 Update 5 for x86_64 (64 Bit) - CD 1 of 6"
and the other 6 CDs.
However, when I went to test the install, I saw the messages:
Probing for video card: ATI Technologies ES1000
Failed to start X server.
Attempting to start VESA X. Failed.
Falling back to text mode.
The crazy thing is, both the card and the chip are from NVidea:
Video Adapters
Description: NVIDIA GeForce 9800 GT
Chip Type: GeForce 9800 GT
DAC Type: Integrated RAMDAC
Memory: 512MB
Video BIOS: Version 62.92.49.0.11
Driver Provider: NVIDIA
Driver Version: 7.15.11.8048
Driver Date: 11-12-2008
Monitor 1: 1366x768x32 60Hz (Primary monitor)
Description: Trigger USB Graphics Chipset Family (1P-E)
Chip Type: Trigger USB 2.0 Graphics Controller
DAC Type: Internal
Memory:
Video BIOS: Video BIOS 1.0
Driver Provider:
Driver Version:
Driver Date:
This is very odd, for a few reasons:
- the card is a few years old, and the distribution is new.
- Windows finds the correct information for this card, that it is an Nvidea card.
- A different simpler card gave the same error message (NVidea GEForce 6800)
What is the secret to installing this version of Redhat in GUI mode?
Thanks a lot

Thanks for responding.
The motherboard is an Asus DSBF-DE with Dual Xeon CPUs and
an SSI EEB form factor. Used mainly in servers.
It was definitely certified for:
Red Hat Enterprise Linux AS 3.0 x86_64Bit
And certified according to this:
http://www.linuxtested.com/results/system.php
And was used in this HP linux compat server.
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/15351-15351-3328410-3328419-3328419-3682822-3706045.html
But my problem is the video card.
When I tried installing Redhat 2.1 years ago, the
install was awful. It started the GUI. But never
found my card. When booting it could only go to
level 3 character mode. I tried reinstalling over and over
until I got it to work by trial and error. Redhat 3
was MUCH better. It found it the first time perfectly.
The Redhat install docs say:
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/4/html/System_Administration_Guide/Display_Configuration-Video_Card.html
2.8.2. Video Card
Probe for video card is selected by default. Accept this default to have the installation program probe for the video card during installation. Probing works for most modern video cards. If this option is selected and the installation program cannot successfully probe the video card, the installation program stops at the video card configuration screen. To continue the installation process, select your video card from the list and click Next.
But I'm not even getting to that initial GUI.
I can find much about certified CPUs and motherboards.
But nothing good so far on video cards.
Does anyone know where I can find a good list of certified video cards?
Thanks a lot!

Similar Messages

Database Instance Install - Does not find Oracle Home

I'm installing SolMan on distributed servers. Oracle 10.20.2 was installed /oracle/product/10.2 (shared db server for sandbox environment); I've set $ORACLE_HOME=/oracle/product/10.2; but SAPINST does not detect and wants to install Oracle under /oracle.
What can I do to have SAPINST see $ORACLE_HOME=/oracle/product/10.2? Is the /oracle hard-coded in the installation? Any suggetsion would be great.

you probably have not installed Oracle with SAP parameters because your ORACLE_HOME should be set as /oracle/[SID]/102_64

Virt-install does not find mount

Trying to use virt-install and mount the iso.
After mounting the iso and answering virt-install prompts
i see
Starting install.....
mount : can't get address for /134.154.231.244
umount /var/lib/xen/xennfs.ayxrcl:not mounted
unable to mount NFS location!
I can mout it manually.

Trying to use virt-install and mount the iso.
After mounting the iso and answering virt-install
prompts
i see
Starting install.....
mount : can't get address for /134.154.231.244
umount /var/lib/xen/xennfs.ayxrcl:not mounted
unable to mount NFS location!
I can mout it manually.1) make sure you are installing a paravirt vm, i.e.
-- paravirt
1) check the --location parameter, it should look like,
--location=nfs:134.154.231.244:/mnt/el5
2) make sure the para installation kernel exists in your mount point. i.e.
there must be a dir images/xen/ under /mnt/el5

After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go?

After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go? The new iTunes opens a 2009 library on start up. My most recent library is ignored even when I go to it directly and start iTunes with it. In another thread someone suggested repairing permissions, I did that and it did not help. I ripped my entire CD collection over the summer (1000's of songs) and now they just don't exist...or I can't find them. They were there before I upgraded to Mavericks the other day. Now vanished. I have found no other issues with Mavericks (yet). Played the music last week; upgraded, now can't find my complete current library. If anyone has a clue as to what might be causing this I sure would like know. Thanks to anyone who can help.

Hi, sorry to hear you had this problem. Sometimes after updating iTunes the library appears blank because a new library (.itl) file has been created. Anyone else experiencing this issue may be able to resolve by following the steps outlined in TS1967. There is ofter a 'Previous iTunes Libraries' folder in the iTunes folder, by quitting iTunes entirely and replacing the currently named iTunes Library.itl file with the library file named by date in the Previous Libraries folder (should look something like 'iTunes Library 2011-08-03') and renaming to 'iTunes library.itl' and relaunching you should find the library looks the same as it did before updating (metadata intact).

EHP Installer does not find BI Java system on 2 System server

Hi folks,
I have a 2-node MSCS cluster with a standalone BI 7.0 ABAP system, as well as a standalone BI 7.0 Java system. To be clear, these are seperate systems, with seperate SID's, installed MCOD in one Oracle instance (A neccessity for J2EE Authentication purposes)
I have run the EHP installer against my ABAP system, and completed (Not without significant effort/time) the EHP1_SP3 installation there. Now, I have cleaned out the EHPI directory and want to run the installer again, but it once more comes across ONLY the ABAP instance, it does not find the Java instance.
I am starting it as indicated, with the:
startup.bat "jce_policy=H:\EHPI\..." and I've tried starting the GUI manually and through the JNLP web start, and both give the same result.
How do I get the installer to recognize the second system on this box?
Any help is appreciated.
Best regards,
Troy Shane

Resolved...was not logged in as SIDADM.

I tunes does not find ipod nano 2nd gen

about a month ago i got a nano 2nd gen...installed itunes and downloaded songs to my nano. Now my computer doesnt recognise it and itunes does not find at all. I completed the 5 r s and still nothing. My nano has been charged several timesbefore but will not charge now. HELP

Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
From the above experience, I would like to share it with the user the following:-
1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
2. Try to connect the iPod with a computer, switching between USB and Firewire
3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
I hope the following works in your case as I did.

Iphone and ipad does not find the airprint printer

After I upgraded my iphone and ipad I lost my airprint function. Ipad and Iphone does not find the airprinter. The printer is a HP Photosmart 5520, and it does work wireless with my Windows PC that is on the same nettwork.

In our case the Airprint printers could not be found after IOS upgraded to 7.1.2, all was fine before then. I have scoured the forums and many people have suffered the same problem. All the solutions given are aimed at a domestic network with just a Wireless router. They all involve restarting all the devices and rejoining the IOS devices to the wireless network. Some people have had to do it multiple times before they regained use of the printers.
In my case none of these work because I am talking about a business network with two wireless access points, several switches and a router. To prove it is the IPads I have installed Bonjour onto a Windows PC (Bonjour is the technology used by Airprint). This finds the printers perfectly so it is definitely something that was changed in the version of Bonjour on the IOS 7.1.2 that is causing all the problems.
I was hoping that Apple would release another upgrade to IOS to fix this problem but it has been several weeks so far and nothing has emerged.
So something that worked perfectly a few weeks ago is now dead in the water because of an update on the IPads!!!!!!!!

My USB Port does not Find my I POD

My USB port does not find my I POD. I have Installed all th elatest software.

Welcome to Apple Discussions!
Does the iPod show Do Not Disconnect? You may want to try resetting your iPod while it is connected...
http://docs.info.apple.com/article.html?artnum=61705
See if this link helps too...
http://docs.info.apple.com/article.html?artnum=61711
Finally, more details on the issue such as what your computer (if anything) does and what the iPod does.
btabz

[SOLVED] ABS - nasm - install file (nasm.install) does not exist

I was attempting to build the nasm package and I encountered the following error:
==> ERROR: install file (nasm.install) does not exist.
When reviewing the PKGBUILD file there was a line in the header:
install=nasm.install
ArchWiki (PKGBUILD) explains the install directive
The name of the .install script to be included in the package. pacman has the ability to store and execute a package-specific script when it installs, removes or upgrades a package. The script contains the following functions which run at different times
I removed the install= line and everything appeared to work. My question is... does anyone know if the install script it was expecting to find did anything special that is going to cause me grief going forward?
Thx
Last edited by dwardca (2013-07-06 04:43:41)

I figured out what I did wrong. I copied only the PKGBUILD file out of /var/abs/extra/nasm folder .. the nasm.install was still in the folder.
Explains why I couldn't find the answer on Google.
Last edited by dwardca (2013-07-06 04:44:13)

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

Spotlight does NOT find iPhoto keywords

Hi,
maybe you guys can help me.
Spotlight does not find any of my iPhotos attached with keywords.
My System is: Mac OS 10.4.4 and iPhoto 6 (5 did not work either).
This is what I have tried so far:
- repaired permissions more then once
- rebuilt the spotlight database through the terminal
- marked my iPhoto folder as privacy in the spotlight preferences and unmarked it
- removed all keywords (1. try: marked all together; 2. try: marked all together and put them in a new empty list) , closed iPhoto, opened it and gave all an dummy keyword; removed the dummy keyword and assigned one-by-one for some iPhotos new keywords
- archived the iPhoto database and let it built up by iPhoto again
- ran the comboupdater of 10.4.4 again
The last try I am thinking on is a "archive&install" of Tiger but maybe you have another idea???
PS: Whats strange is that when I look at the processes while assigning keywords, the process 'mdimport' starts to work... but again, Spotlight does not find the iPhotos by keywords.

I also had this happen to me several times. Once when I first moved to OS X 10.4 and again when I had to reload my computer. Each time I had archived my iPhoto library to a second drive, installed the OS on a clean formated drive and then copied the iPhoto Library back into my home directory.
From that point, Spotlight would refuse to search for files via keywords. That is, until I updated the photo. By select each photo and changing somthing about the photo, wether editing the photo, changing its star rating to something else and back again, or even adding keywords to the photo, even putting a comment of a blank space in for each photo, doing anything to the photo that would update the xml file would cause that entry to get updated and in turn allow the photo to be searchable by keyword via Spotlight.
There are scripts available that can actually put the iPhoto keywords into the photo file iteself. The one I am using also needs to have GraphicConverter installed. This way I can search either through iPhoto or Adobe Bridge for the Photos that I want to use.
PPC G4 1.4GHz Mac OS X (10.4.2) 1GB RAM, 120GB HD x2, SuperDrive, 128MB ATI Graphics Card

Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign

Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign, why?

hi Phillip
i am not sure what you mean
I downloaded the ifilter and installed it
then configured everything as shown in the pdf file
I tried indexing from scratch exactly as i did successfully in the other computer
and got some errors in the log file
i checked the sql server log and the event viewer logs and got :
Error '0x80004005' occurred during full-text index population for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'), full-text key value 0x0000027A. Attempt will be made to reindex it.
The component 'PDFFilter.dll' reported error while indexing. Component path 'C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin\PDFFilter.dll'.
Informational: Full-text retry pass of Full population completed for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Number of retry documents processed: 1. Number of documents failed: 1.
Changing the status to MERGE for full-text catalog "Pirsumim_ext_catalog_ck" (5) in database "Pirsumim_ext_ck" (14). This is an informational message only. No user action is required.
Informational: Full-text Auto population initialized for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Population sub-tasks: 1
the same dll worked fine in another computer...
how can i see more details what is wrong with this dll ?
meidad

ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist

Hi ,
We are getting below error while executing webservice from PL/SQL block. Please help what would be wrong in below code. Thanks in advance.
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
ORA-06512: at "SYS.UTL_DBWS", line 318
ORA-06512: at "FUSION.ADD_NUMBERS", line 21
29540. 00000 - "class %s does not exist"
*Cause: Java method execution failed to find a class with the indicated name.
*Action: Correct the name or add the missing Java class.
PL/SQL Code
CREATE OR REPLACE FUNCTION add_numbers (username IN VARCHAR, password IN VARCHAR)
RETURN NUMBER
AS
l_service SYS.UTL_DBWS.service;
l_call SYS.UTL_DBWS.call;
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname SYS.UTL_DBWS.qname;
l_port_qname SYS.UTL_DBWS.qname;
l_operation_qname SYS.UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return NUMBER;
returnVal BOOLEAN;
boolean_type_qname sys.utl_dbws.QNAME;
string_type_qname sys.utl_dbws.QNAME;
BEGIN
sys.UTL_DBWS.SET_PROPERTY(l_call,'USERNAME','fusion');
sys.UTL_DBWS.SET_PROPERTY(l_call,'PASSWORD','fusion');
l_wsdl_url := 'http://adcdab06.us.oracle.com:10217/xmlpserver/services/PublicReportWSSService?wsdl';
l_namespace := 'http://xmlns.oracle.com/oxp/service/PublicReportService/';
l_service_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'PublicReportWSSServiceService');
l_port_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'PublicReportWSSService');
l_operation_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'validateLogin');
l_service := SYS.UTL_DBWS.create_service (URIFACTORY.getURI(l_wsdl_url),l_service_qname);
l_call := SYS.UTL_DBWS.create_call (l_service,l_port_qname,l_operation_qname);
sys.utl_dbws.set_target_endpoint_address(l_call, 'http://adcdab06.us.oracle.com:10217/xmlpserver/services/PublicReportWSSService');
boolean_type_qname :=sys.utl_dbws.to_qname ('http://www.w3.org/2001/XMLSchema', 'boolean');
string_type_qname :=sys.utl_dbws.to_qname ('http://www.w3.org/2001/XMLSchema', 'string');
sys.utl_dbws.add_parameter(l_call, 'BI_Admin', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(l_call, 'Welcome1', string_type_qname, 'ParameterMode.IN');
-- sys.utl_dbws.add_parameter (l_call,returnVal,boolean_type_qname,'ParameterMode.OUT');
sys.utl_dbws.set_return_type (l_call, string_type_qname);
-- utl_dbws.add_parameter(l_call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
--sys.utl_dbws.add_parameter(l_call, 'TEST', string_type_qname, 'ParameterMode.IN');
--l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
--<validateLogin xmlns="' || l_namespace || '">
--<validateLoginInput>' || p_int_1 || '</validateLoginInput>
--</validateLogin>');
l_xmltype_out := SYS.UTL_DBWS.invoke(call_Handle => l_call, request => l_xmltype_in);
SYS.UTL_DBWS.release_call (call_handle => l_call);
SYS.UTL_DBWS.release_service (service_handle => l_service);
dbms_output.put_line('WS Executed successfully...');
-- l_return := l_xmltype_out.extract('//return/text()').getNumberVal();
RETURN 11;
END;
/

Check if this helps:
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

ORA-29540:class oracle/pub/runtime/dbws/DbwsProxy does not exist

Hi we are getting below error while calling UTl_DBWS package.
Database version 11.2.0.2
package definition
create or replace function xxpvn_ws_test
return varchar2
is
service_           sys.utl_dbws.SERVICE;
call_              sys.utl_dbws.CALL;
service_qname      sys.utl_dbws.QNAME;
port_qname         sys.utl_dbws.QNAME;
xoperation_qname   sys.utl_dbws.QNAME;
xstring_type_qname sys.utl_dbws.QNAME;
response           sys.xmltype;
request            sys.xmltype;
begin
service_qname := sys.utl_dbws.to_qname(null, 'getJoke');
service_ := sys.utl_dbws.create_service(service_qname);
call_ := sys.utl_dbws.create_call(service_);
sys.utl_dbws.set_target_endpoint_address(call_, 'http://interpressfact.net/webservices/getjoke.asmx');
sys.utl_dbws.set_property( call_, 'SOAPACTION_USE', 'TRUE');
sys.utl_dbws.set_property( call_, 'SOAPACTION_URI', 'http://interpressfact.net/webservices/getJoke');
sys.utl_dbws.set_property( call_, 'OPERATION_STYLE', 'document');
request := sys.xmltype(
       '<getJoke xmlns="http://interpressfact.net/webservices/">'
    || '<Category>Excuses-10</Category>'
    || '</getJoke>');
response :=sys. utl_dbws.invoke(call_, request);
return response.extract('//getJokeResult/child::text()',
    'xmlns="http://interpressfact.net/webservices/"').getstringval();
end ;error message
SQL> select xxpvn_ws_test from dual;
select xxpvn_ws_test from dual
ERROR at line 1:
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
ORA-06512: at "SYS.UTL_DBWS", line 144
ORA-06512: at "SYS.XXPVN_WS_TEST", line 14
Thanks
Jitendra

This error related to jave since its not installed in database user schema
Logout of sqlplus and run:
loadjava -u / -r -v -f -s -grant public -genmissing dbwsclientws.jar dbwsclientdb102.jar
Check this
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2264325

Oracle Redhat 64 bit install does not find right video chip or drivers

Similar Messages

Maybe you are looking for