Oracle Report 6i running on NT and LOGOS

Hi All,
I am running report 6i on NT, I am including a company Logo in a custom report, but when I run the report from apps 11i, my logo is not there. I can't get it show up even after trying things like links, virtual paths etc.
Please help....
Andy
[email protected]
null

hello,
please try to run the report outside apps. it might be, that the report is modified by apps prior to beeing run.
if it works fine outside, which i am sure it will, i am afraid you have to contact your apps support to check with them.
sorry for not beeing more specific, but it is very complicated to find problems as long as they only reporduce in the apps-environment.
regards,
the oracle reports team

Similar Messages

How do I schedule the Oracle Reports to run only weekdays (Mon - Fri)?

I am using the Oracle Reports Server to schedule the report.
I have successfully been able to schedule my report to run every day (Monday - Sunday), but the customer does not want it creating an empty report on Saturdays and Sundays. I have tried at least 50 different &schedule= commands and none of them work.
Someone here suggested that to use WEEKDAYS that the DBAs have to set something up in the Oracle Report Server, however our DBAs do not know of anything that they have to do.

If you have monday to friday these would be 5 weekly jobs for every day.

Oracle report 10g publsinng on web and Oracle Portal

I am converting a report that was using oracle OAS9i, we pass to URL(rdf file) userid/password and worked fine. We were not using Portal, even though it is installed by OAS. Now seems we have to use Oracle Portal to publish the same report. Is that right? If not how will I use report servlet to call a rdf file I assume I still need to send oracle user id/password as that is needed to run report(knowing this from old Oracle report 6.0). We really do not want to autheticate any user all users behind use the same Oracle account to print reports. Any hint?
Another thing I find that now reports are closely linked to Portal and looking at web publishing document it seems one needs to view them thru Portal. Please help me understand this why I can not just see the report as once they are processed they produce pdf that any borwser can show.

Any one??

Oracle Reports server 10g shutting down and starting automatically

Hi ,
My 10g Reports server runs on Redhat v4.0 .
From few days reports server log show that Reports Server is shut down and starts up automatically.
------- log -------
*** 2007/8/28 7:26:21:353 -- Shutting down engine rwEng-0
*** 2007/8/28 7:26:21:353 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 9:21:51:688 -- Reports Server started up engine rwEng-0
*** 2007/8/29 9:53:10:650 -- Shutting down engine rwEng-0
*** 2007/8/29 9:53:10:651 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 1:46:18:389 -- Reports Server started up engine rwEng-0
what might be reason for above issue ?
Thanks ...
Raju

The reports server is not shutting down but rather engines used by the reports server are being stopped and started. A reports engine requests data from the data source, formats the report, sends the output to cache, and notifies the Reports Server that the job is complete. These engines are cycled like connections in a connection pool. You can configure them in the ORACLE_HOME\reports\conf\rwservlet.properties file. Look here for details:
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1006129

Oracle reports(9i) as destype=file and desformat=dflt

Hello,
I have a front end in forms which give a call to run a report on press of button.The report(9i) is not using charecter mode runtime.It is giving me error though dflt.prt is already there in the printer file under oracle home directory.
Can any one tell me why is it unable to get this prt file.
Is it beacuse that we can use these prt files in charecter mode only.
If yes,how can i use it to run my report from forms with charecter mode runtime? When i try the same i am getting an error saying charecter mode runtime is not allowed.
Cheers,
Rajeev

Hi,
Thanks for your reply.
Clustering seems to be very good feature of the Oracle Reports server however in our application we do not want more than one server. The problem which I face is mentioned below:
1. We have a server application which actually starts the oracle rwserver.exe in a separate process during its initialization.
2. Whenever this server application receives a report request it from some client then it executes the reports by calling rwclient.exe through a separate process which in turns submits the request to rwserver.exe
3. My problem is that in our network we can have multple such server application running different releases. For this we need to run the rwserver on all the machines where my server application is running.
4. In this scenario this Smart agent (osagent.exe) is preventing me to make the different servers applications of different releases to be up and running.
5. How can I configure my rwserver.exe/osagent.exe so that it remains concerned with the specific machine on which it is running.
Thanks
Ashish

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

Oracle Report Server Inteface with c and c++.

sir ,
How I can update schedule list with c and c++ programs which is submitted to the report server.
Ajay Nema

hi,
./rwdiag.sh -findall
rwdiag is a utility used to find all the Reports Servers on the network.
./rwdiag.sh -find <report server-name>
and it monitors packets broadcasted on the network by the particular Reports Server.
THis link might help you,details about rwdiag.sh
http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_rwdiag.htm
Regards
Fabian

JSP Best Practices and Oracle Report

Hello,
I am writing an application that obtains information from the user using a JSP/HTML form and then submitted to a database, the JSP page is setup using JSP Best Practices in which the SQL statments, database connectivity information, and most of the Java source code in a java bean/java class. I want to use Oracle Reports to call this bean, and generate a JSP page displaying the information the user requested from the database. Would you please offer me guidance for setting this up.
Thank you,
Michelle

JSP Best Practices.
More JSP Best Practices
But the most important Best Practice has already been given in this thread: use JSP pages for presentation only.

Integration problem between oracle forms 10g and oracle report 10g

Hi!
I've got any error message "Unable to connect to the report server "server name"" when a oracle report is run using run_report_object in the oracle form under oracle form developer 10g. Please advise any settings are required in order to run the report. Thank you very much.
Best Regards
Pinga

The report server is running as the report can be run via URL in the brower. However, it prompts out the error when it is called by oracle form using the run_report_object.

Oracle report 6i on AR and AP

Hi Genius,
Can someone please help me on how to access queries and sql statement in AR
and AP using oracle report 6i.Please state clearly the steps required.
I will really appreciate it bcos i m new to this technology.

Hi,
I landed into an issue may be anyone can help me..
I need to increase the font size of one field in a concurrent request in Oracle Purchasing its an Oracle report I had ftped it and once I try to open that file thru Report builder it gives me error..
REP1415 'before report" Unknown user exit
1.I was wondering do I need to do some special treatment before thta report can be open in report builder and once its being modified and returned back in application
2.Is it possible to increase the font size thru report builder
3.This report is Faxed to suppliers do it had to do anything defined in printer files.
Plaese help..

Intergration between Oracle Forms 10g and Oracle Reports 10g

Hi!
I've got any error message "Unable to connect to the report server "server name"" when a oracle report is run using run_report_object in the oracle form under oracle form developer 10g. But, the report can be run via URL in brower. Please advise any settings are required in order to run the report. Thank you very much.
Best Regards
Pinga

The report server is running as the report can be run via URL in the brower. However, it prompts out the error when it is called by oracle form using the run_report_object.

Oracle Reports 6.x and Oracle Express Server

What are the benefits of using Oracle Reports in conjunction with Oracle Express Server? We are currently using OFA for planning and forecasting, and are evaluating Oracle Reports as a tool to produce and publish key financial reports for a large user community. Is there any benefit in using Oracle Reports rather than just creating and publishing the reports directly within OFA?
Thanks,
Bill

Bill,
we tried to use Reports 6i with Express server. There were many troubles.
1. It is very hard task to establish connection Reports/Express
2. It is not possible to enter parameters for the reports
3.There are limitation on the number of dimensions in the report
Regards
Joseph Schwertner

Oracle reports and multiple pages

I am new the Oracle Reports and I am trying to generate a report that can continue to the another page. For instance, if my list of items exceeds the first page of the report, the remaining items will be printed on the next page. We can get it to continue to the next page, but the formatting of the following pages after the first page needs to be different. Currently, it is placing the remaining items in the same position as the first page. The remaining items should be further up the page.
In short, how do I generate 1 report with 2 different formats. All pages beside the 1st page will be the same.
Any guidance is appreciated.

Please post the details of the application release, database version and OS.
I would like to ask for your help regarding printing from concurrent requests.
I am currently having an issue with printing multiple pages from Oracle reports, both in text format and RTF/PDF formats.
When I generate a multiple page report and print it directly from a concurrent request, print outs generate extra space after each page even though page size is indicated in the reports (all of them are in letter size).What if you print the output file from the OS, can you reproduce the issue then?
Troubleshooting (Printing) [ID 104528.1]
An Extra Empty Page Is Printed at the End of Requests Output [ID 1011499.7]
I have already tried editing the printer drivers both the actual driver config file and through the application but the results are still the same.Can you reproduce the issue with other printers?
This is very important since printing is done on continuous paper and continuous pre-printed forms
Any ideas would be greatly appreciated.If the issue is urgent, please log a SR.
Thanks,
Hussein

Oracle Reports with graphics for Oracle App R11i 11.5.9 ??

Hii
Can i develop Oracle Reports with Graphics ( basic header,footer,logo ) and register it with Oracle Apps R11i 11.5.9 and be able to view it as an end user.
If yes then how ?
Regards
Fahad Hameed

Hii Guys
I've developed a report with a basic Header.BMP file and it runs fine on local.
How will it run on Oracle Apps is the question that i need to find answers to .
Regards
Fahad Hameed

Command to open a PDF generated Oracle Report in New browser window

I know this is probably something for the Oracle Forums but I'll ask anyway because I can't find any info out there on this, without some extra work.
I am generating a PDF file from 10g Oracle reports on Linux RHEL 5 and storing the PDF file to the server. I can send that PDF file directly to a printer with the "lpr" command and that part works fine.
What I'm wanting to do now is "View" the PDF from within the server in a new window. We are using RHEL 5 (Linux) platform and I'm trying to see if there is a way to open the file with a "command line" command that will open it in a new browser window or new window period (opening it with Adobe Acrobat).
Does anyone have a command that will do this? Otherwise, how has everyone else been handling this. The idea of just viewing the previously generated PDF Report file will save us overhead on our database servers because they won't have to re-run some of the same reports over and over.
Any help and assistance is appreciated.
Chris

Several options:
- If you only want to show the pdf to the client without printing, use destype=cache and use WEB.SHOW_DOCUMENT after the RUN_REPORT_OBJECT (for examples search the forms-forum, there are lots)
-If you have to generate the pdf to a file to get it printed, you could
+use WEBUTIL_FILETRANSFER.AS_TO_CLIENT after the printing to transfer the file to the client, then use CLIENT_HOST to view it.
+map the appserver-directory you generate the report to as a virtual directory in the application-server then use WEB.SHOW_DOCUMENT to directly access the generated file via url.

Oracle Report 6i running on NT and LOGOS

Similar Messages

Maybe you are looking for