Oracle Report Query

Hi Experts,
we have oracle EBS 11i (11.5.10.2) .
I am registering the oracle report with From and To Date parameters and want to validate the To Date should be >= From Date .
How can I validate it ?
regards
Sanjay

Hi Sanjay,
You can do this by using the Range option while defining your parameters.
1. Define the From Date parameter in the Concurrent Program parameters window. On the right side of the window, you will see the Range option, select 'Low' from the list.
2. Define the To Date parameter. In the Range option, select 'High' from the list.
Users will be forced to enter To Date>=From Date
Regards,
Sujoy

Similar Messages

Comma separated data into IN clause in oracle report query

i have a field on form as order number it takes more than one value as 1,2,3
now i want to fetch data in report query for where order no in 1,2 and 3...
but field takes value as 1,2,3...
how can i separte the comma from value and how can i pass value in IN clause...or
how can i get all records with order no 1,2,3...
please suggest how can i achieve the same....

Hi Maddy....
Try this :
declare
var varchar2(10);
v1 varchar2(5);
v2 varchar2(5);
v3 varchar2(5);
vRegExp varchar2(5);
begin
var:='1,2,3';
vRegExp:='[^,]+';
FOR i IN 1..length (regexp_replace (var,vRegExp)) + 1
LOOP
            v1 := REGEXP_SUBSTR (var,vRegExp);
            v2 := REGEXP_INSTR(var,vRegExp,1,2);
            var := substr(var,v2);
           // here fetch you data from report by passing v1 as a parameter;
      EXIT WHEN v2 = 0;
END LOOP;
end;
Hope this will resolve your question..
Thanks

A bug in ORACLE Report query??

I need to modify my report by adding a description. I can run my query from SQL statement without a problem. However, when i put it in the report, strange result is happening.
The result for 1 record used to be 1 page only and now went up to the number of record in the child table.
Parent query:
SELECT event_id FROM events;
One of the child query is as follows:
SELECT event_id, decode(m_event , 0, ' ', 'X') e_major_ind
FROM event_responders
I need to make a modification by adding following to the query:
(select decode (major_event, 0, ' ', ': '||meaning )
from domain where domain = 'EVENTRESPONDERS_MAJOR_EVENT' and value = major_event)
So currently I have the following:
SELECT event_id, decode(m_event , 0, ' ', 'X') e_major_ind,
(select decode (m_event, 0, ' ', ': '||meaning )
from domain where domain = 'MAJOR_EVENT' and value = m_event) e_major_desc
FROM event_responders
As soon as I added that subquery, I got an unlinked icon in the query box in the Data Model page.
Any idea? Is this a known bug? or Am I missing something?
Thank you soo much for your help.

SELECT ER.EVENT_ID,
       DECODE(ER.M_EVENT, 0, ' ', 'X') E_MAJOR_IND,
       DECODE(ER.M_EVENT, 0, ' ', ': ' || DOM.MEANING) E_MAJOR_DESC
FROM EVENT_RESPONDERS ER, DOMAIN DOM
WHERE DOM.DOMAIN = 'MAJOR_EVENT'
   AND DOM.VALUE = ER.M_EVENTIf you can't get it by joining to your reference code table, use a column formula to return the description.
Good luck.

Oracle Reports complex query

Hi Friends,
I am a newbie on oracle reports. I am ask to revise/debug a complex report.
This is the partial source of the Oracle Report Query:
select mta.transaction_date,
        &P_acct_flex,
        DECODE(mta.transaction_source_type_id,1,to_char(mmt.transaction_source_id),2,&P_so_flex,
               mmt.transaction_source_name) Source
from
       mtl_system_items            msi,
       &C_from_cat
       &C_from_type
       &C_source_from
       mtl_material_transactions   mmt,
       gl_code_combinations        gcc,
       MTL_SALES_ORDERS            mkts,
       MTL_GENERIC_DISPOSITIONS    mdsp,
       GL_CODE_COMBINATIONS        gl,
       mtl_transaction_accounts    mta
where   mta.transaction_id = mmt.transaction_id
       and &P_where_acct
       and &P_where_item
       and &P_where_cat
            &C_where_cat
            &C_where_type
       and msi.organization_id = :P_org_id
            &P_date_range
            &C_where_value
            &C_where_subinv
            &C_where_reason
            &C_source_where
/I want to test first the reports in the SQL*Plus environment but I find It hard to substitute lots of variables :(
How do I substitute these variables and what data-type should I put in for
My question is:
1. Whats the difference of the variable &variable and :variable?, are they both parameter variables and need input from parameter screen during runtime?
2. From the last part of the query
       and msi.organization_id = :P_org_id
            &P_date_range
            &C_where_value
            &C_where_subinv
            &C_where_reason
            &C_source_whereHow do I substitute the variables here? I am expecting some "operators" between them but there is none.
Can I do the query as "and msi.oraganization_id = &P_org_id" instead of "and msi.oraganization_id = :P_org_id"?
Please help...
Thanks a lot
msk
Edited by: yxes2009 on Jan 11, 2010 8:07 PM

Use Toad here if you can. It's easier to assign values for :p or &var.
1. Whats the difference of the variable &variable and :variable?, are they both parameter variables and need input from parameter screen during runtime?DM answered it.
2. From the last part of the queryand msi.organization_id = :P_org_id
&P_date_range
&C_where_value
&C_where_subinv
&C_where_reason
&C_source_where
How do I substitute the variables here?Keep in mind that the substitutes should make sense. For example :P_org_id can be 123 and &P_date_range can be 1=1 or 'and ... between .... and ...' etc.

ORACLE reports Build 10g - Data Model - query - If statement in Alias ?

I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

It is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.

Ora-06502 pl/sql numeric or value error in Report Query in oracle apex

Hello all,
I need your help...
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I am using bi publisher to generate PDF reports in oracle apex.
We were using APEX 4.0 and migrated to 4.2 just a week ago.
Now we have apex 4.2.
When I try to Create report query,
Shared Components >> Report Queries then create.
and test a report in a create wizard I am getting a error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small".
I have also applied a patch "16760897".
This issue is because of number of columns in a query is more then 26.
If I run a report with 26 or less number of columns then the is working fine, otherwise getting this error.
My before migration report queries working perfectly even now, but not new queries.
This issue is also in apex.oracle.com.
You can see
Not working - http://apex.oracle.com/pls/apex/f?p=619:4
Working - http://apex.oracle.com/pls/apex/f?p=619:2:
Please give a solution.
Thanks you.

check the DB version compatibility with apex 4 or your DB version to apex 4.0 support for upgrade!
Oracle Application Express Installation Requirements for 4.0

SQL Query as Item Source/Oracle Reports w/ HTML DB?

I have successfully used a SQL Query as an item source in the past on several occasions. However, in this instance, every time I try to do this, I get the following error:
Error ERR-1019 Error computing item default value: page=3 name=P3_TEST_ITEM.
ORA-01460: unimplemented or unreasonable conversion requested ORA-02063: preceding line from [database_name]
If I use the exact same query in creating a report region, the page displays fine and the query returns the correct data. Why might this be happening, and what can I do to fix it?
Also - off the subject - is there a way to use HTML DB to deploy reports that are created in Oracle Reports Builder? I have created several employee productivity reports for supervisors and managers in HTML DB, which is great for allowing them to run them live and have fields as parameters for varying employees, date ranges, etc... but formatting them to be browser and printer friendly is an absolute nightmare so far. If I could create and format the reports in Reports Builder and then deploy them using HTML DB, while still being able to offer parameters to the user, that would be perfect. Is this possible?

Here is my query:
SELECT
TO_CHAR((sum(decode(ef.production_function,'Y',ef.function_minutes+ef.function_ot_minutes))/60)/8, '9999999.99')
FROM
RLAPPLSG.EMPLOYEE_INFO@REMOTE_SERVER EI,
RLAPPLSG.SC_EMP_FUNCTIONS@REMOTE_SERVER EF,
RLAPPLSG.SC_EMP@REMOTE_SERVER E
WHERE
( e.SC_EMP_NBR=ef.SC_EMP_NBR )
AND ( ei.EMP_ID=e.EMP_ID )
AND (
( trunc(( e.SC_DATE )) BETWEEN :P2_BEGIN_DATE AND :P2_END_DATE )
AND (ei.EMP_MGRS_ID = :P2_SUPERVISOR_ID
OR ei.EMP_ID = :P2_SUPERVISOR_ID)
Every table and/or view that is referenced here is done so remotely. The column datatype breakdown is as follows:
production_function - BOOLEAN
function_minutes - NUMBER
function_ot_minutes - NUMBER

Oracle report , when no data found in query then ptint zero in text how

hi ,
i have use oracle report in one query if no data found then i have return O but no row select is there
query is
select sum(nvl(a.pitm_matl_cost,0)),
decode(b.pm_assy_type,'B','B','Z')
from pumpitems a, pumpmast b
where a.pitm_proj_code like 'KAWASII' and
a.pitm_pump_type = b.pm_pump_type and
a.pitm_comp_type = b.pm_comp_type and
a.pitm_sr_no = b.pm_sr_no and
substr(a.pitm_matl_code,1,1) = 'X' and
pitm_itm_cal = 'N'
group by decode(b.pm_assy_type,'B','B','Z')
order by decode(b.pm_assy_type,'B','B','Z')
no data then it return no row select but
i have return 0 how is possible , in report i have check cf, and cs to total , and no data then print 0 in text box so.
sol1:
select count(*), sum(nvl(a.pitm_matl_cost,0)),
decode(b.pm_assy_type,'B','B','Z')
from pumpitems a, pumpmast b
where a.pitm_proj_code like 'KAWASII' and
a.pitm_pump_type = b.pm_pump_type and
a.pitm_comp_type = b.pm_comp_type and
a.pitm_sr_no = b.pm_sr_no and
substr(a.pitm_matl_code,1,1) = 'X' and
pitm_itm_cal = 'N'
/*and
substr(a.pitm_matl_code,1,1) != 'C' and
substr(a.pitm_matl_code,1,1) != 'F' and
substr(a.pitm_matl_code,1,1) != 'S'*/
group by decode(b.pm_assy_type,'B','B','Z')
order by decode(b.pm_assy_type,'B','B','Z')
count(*) is return 0 but it's notworking in this query why i dont no
another soluction than help

This sounds like it's similar to another recent post
Re: How do I print some value when there is no record against field

Oracle report problem-Passing a column value from a query block to another

Hi I am facing a problem in oracle reports.
I have 3 query blocks say Q1,Q2 and Q3.
From Q1 I get a tblkey coulmn and for each value of tblkey I need to pass it on to Q2 which gives me a status and now finally Q3 will take tblkey and status to give me final output.
Can somebody please tell me how I can do it?
Thanks,
Avin

Depending on your report requirement, you may do a join of Q1, Q2, and Q3; or keep all Qs and for Q3 use subqueries ...
Select ... from ... where tblkey, status in (
select tblkey, status from ... where tblkey in (
select tblkey from .... where .... ) )
Good luck.
DC

How to write REF-CURSOR Query in Oracle Reports

Hello Guys!!
I have a form in which you can select regions/divisions/locations etc by the use of check boxes. And the selected values will be inserted into a table, and based on the selected values of the table the report is run.
The issue I have is with the query inside the Oracle reports(attached to this file).
The query works fine until the last two EXISTS conditions.
IF a region exists In the table report_param then it works fine but if there are no divisions in it , then the query returns no values, which is not correct.
Someone has advised me to use a ref-cursor query inside reports tool, which I am not aware off. So, anykind of suggestions or advises are welcome. Please let me know about it as it is very urgent issue for me. Anykind of help would be greatly
appreciated.
Thanks,
Vishal
-------------------------------------------------------Query in Oracle Reports---------------------------------------------------------
select c.key_segment, p.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>')) COL_NM,
sum(a.ext_price) sales_dols,
sum(comp_allow_pkg.get_comp_allow_stddiv(a.control_loc_id, a.product_id, a.sold_to_customer_id,
a.doc_dt, a.ext_price, a.units)) cust_reb_dols,
sum(a.units) units,
sum(a.ext_cost) cost_dols
from sales a, key_segment_plns c, product p, rep_wrtr_dw_cust h
where a.doc_dt between :in_start_dt and :in_end_dt
and a.customer_oc = h.control_loc_id
and a.sold_to_customer_id = h.sold_to_cust_id
and a.ship_to_customer_id = h.ship_to_cust_id
and ((:in_dg_cd = 'B' and h.dealer_grower_cd in ('D','G')) or h.dealer_grower_cd = :in_dg_cd)
and a.product_id = p.product_id
and p.product_gl_class_cd = 'CHEM'
and p.product_legal_name = c.product_legal_name
and c.key_segment in ('GLYPHOSATE','PLANT HEALTH/RUST FUNGICIDES','PYRETHROIDS','STROBI FUNGICIDES')--&IN_KEY_SEGMENTS
-- and (:in_oc = 'ALL' or (a.control_loc_id in (select control_loc from control_loc_comb_ocs where control_loc_comb = :in_oc)))
-- SALES DATA FILTERS TO MATCH ACCUM_SALES_DG_MV
and a.sale_type_cd in ('02','08')
and a.document_type_cd in ('I','C','D')
and (substr(a.product_id,-1) in ('0','1') OR nvl(upper(trim(p.product_brand)),'X') = 'TECH FEE')
and a.units <> 0
and a.unit_cost <> 0
and a.unit_price <> 0
-- NEW FILTERS ADDED 9/11/07: LOCATION(BRANCH), BUSINESS TYPE, RSM/ASM/REP
and ((:in_loc = 'ALL') or (nvl(a.warehouse_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='LOCATION_TYPE')))
and ((:in_uhs_ag = 'ALL') or (:in_uhs_ag = 'NA' and p.product_uhs_ag != 'A') or (p.product_uhs_ag = :in_uhs_ag))
and ((:in_sales_rep = 'ALL') or (nvl(a.territory_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='SALES_REP_TYPE')))
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'REGION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'DIVISION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
group by c.key_segment, P.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>'))

Hi,
I need your help to create a report using Ref-Cursor. please see the below thread
Report using ref cursor or dynamic Sql

Running Web Layout Of JDBC Query in Oracle Report Builder 11g.

javax.servlet.jsp.JspException: REP-4100: An attempt to execute data source failed. JDBCPDS-62008:A SQL error occurred: {0}. S1000 [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
javax.servlet.jsp.JspException: REP-4100: An attempt to execute data source failed.
JDBCPDS-62008:A SQL error occurred: {0}.
S1000 [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
     at oracle.reports.jsp.ForEachTag.doStartTag(ForEachTag.java:407)
     at jsp_servlet.__module1000802592._jspService(__module1000802592.java:191)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:417)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

For the more clarification, I have used JDBC Query as Data source type and Database connected via ODBC Driver in System DSN. The Driver selected from the drop-downs are jdbc-odbc.
Kindly explain the mistake I m doing.

How to change report query dynamically in Oracle APEX?

Hi,
I want to dynamically change the where condition in APEX report query. Can anyone help me solve my this problem?
(Just want to change the query which we change in Oracle Reports using lexical parameter to change &Where, &Order by etc. dynamically!!)
Thanks, Praful

Hi
I've been using flexible queries in APEX for a few years now, and your question just added a whole new dimension to the flexible and powerful nature or writing reports in APEX.
While APEX Interactive reporting has almost completely removed the need the equivalent of Lexicals in Oracle Reports, I thought it might be fun to try and use lexicals in an APEX report.
Before we start I should summarise the powerful capability of APEX reporting to have oprtional parameters (lots and lots of them if this is needed).
For each parameter, you simply add a page item which will hold the value of the parameter.
The item/parameter can be populated by typing in the value, defining an LOV, using a date-picker etc.
To make the parameter optional simply use an OR in the where clause.
So for a apge item P200_PARAM1.....include
WHERE (:P200_PARAM1 IS NULL
OR COLUMN1 = :P200_PARAM1)
This way you can either leave the page item null or type in / select a value from a LOV.
There is a small quirk in APEX LOV's which sometimes returns a value of '%' or '%null%' - depending on the version - when no value is selected.
See Patrick Wolf's solution for this at Re: Null value handling in LOVs
I include this Application Process in all my APEX applications ;)
Now let's look at using the equivalent of Oracle Reports Lexicals......
First-off - this is based on the APEX SQL report - NOT Interactive Report.
It relies on the fact that you can let the query be parsed only at runtime.
1. Define an SQL report entering the 'core' of your query.
With a query like SELECT ENAME, JOB FROM EMP
Select 'Generic Columns' option in the 'Column Headings' section
Finish the report creation
2. Define a page item - say P200_LEXICAL - type text on the page
3. Edit the report and update the SQL query to include your lexical page item
SELECT ENAME, JOB FROM EMP &P200_LEXICAL. (REMEMBER THE '.' AT THE END)
Ensure that the option "Use Generic Column Names (parse query at runtime only)" is selected at the bottom of the query
4. Add a button to the page -using 'Create a button displayed among this region's items' the will submit the page.
5. Run the page - you will see all the employee names and job desdriptions
6. Enter a where clause into the 'Lexical' textbox - say "WHERE ENAME LIKE 'K%'" and click the 'Go' button
Voila! your where clause is magically applied.
Try any variant you like adding an ORDER BY clause etc...... this is FUN!
7. Clear the value of the LEXICAL and click go.
Edit the report and move the &P200_LEXICAL. into the selected columns (or add another one)
SELECT ENAME, JOB &P200_LEXICAL. FROM EMP
8. Run the page
Enter ",SAL" in the textbox and "Go"
We can add as many columns as we like (subject to the "Maximum number of generic report columns:" set below the SQL query in the report edit section)
Now because we have all the flexibility in APEX of setting page items using SQL or PLSQL you can set the value of the lexical programatically, or just pre-set a few values in an LOV - the options are limitless.
While I've never had the need to use lexicals - you can see that APEX provides the most Flexible Lexicals in town.
Eat your heart out "Oracle Reports"!!!
Have fun
Mike

WITH Clause query doesn't work in Oracle Reports.

Hi Gurus,
I'm using a WITH clause query and need to build a report using the same query.
But when i'm trying to build a report, query is giving error as "WITH clause table or view doesn't exists".
But the same query perfectly works in sql prompt.
Oracle Reports doesn't supports WITH clause query?
Please suggest.
Thanks,
Onkar

I ran into a similar problem before and worked around it by moving the query to a pipelined function in the database as described at WITH clause unexpectedly causes ORA-00942 in Reports Builder
Hope this helps.

Programmatically change the query used to generate Oracle Reports

I have two queries. Depending on some parameter value, I would like to use one of these queries to generate my report. Is it possible to programmatically change the SQL query used to generate the Oracle Report.
Thanks

There are two options:
- The easy way
In the report paper layout create two frames, one for each query , and at runtime
display only one based on your parameters. (using format triggers on the frames)
- the not so easy way (but more elegant)
create the query at runtime using xml customizations using the examples from
the following documentation:
http://download-
uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_xml.htm#i1006734
16.3 Creating XML Data Models
16.4.1.3 Applying an XML Report Definition in PL/SQL
16.4.1.3.2 Applying an XML Definition Stored in Memory
Regards and Good Luck
Ionut S

Oracle Reports : one query - two reports?

Help, please, Oracle Reports 10g.
I have a query, need to make two reports in one. They are similar, just couple parameters are different, say, entreprise type and region;
How do I display these two reports in one? I tried to make parameters as placeholders, package variables, put an trigger on outer frames for reports. parameters do change their values but just the same report displays twice. where is the trick?
Thank you

The way I have done this in the past was to create 2 master frames, 1 for each report and then put conditions on each frame as to when it is to appear. Hope this helps..

Oracle Report Query

Similar Messages

Maybe you are looking for